LM358H/NOPB - Dual 32-V 1-MHz Op Amp | Texas Instruments
MPN: LM358H/NOPB ✓ NakahandaLM358H/NOPB Ulas
An operational amplifier is an analog integrated circuit that uses high-gain differential feedback to amplify voltage differences. The LM358 belongs to the operational-amplifier hierarchy and, more broadly, to analog signal-conditioning and linear active-device categories. Its single-supply operation and internal frequency compensation simplify designs that compare sensors, amplify low-level signals, buffer voltage references, or provide basic active filtering without an external compensation network.
The primary device characteristics are a 32-V supply rating, 1-MHz gain-bandwidth product, dual-amplifier configuration, and 8-pin TO-99 package. The two amplifiers operate independently while sharing common power-supply and ground pins. The TO-99 package is a through-hole metal-can format that supports insertion into perforated PCB or socket-based assemblies and is useful where ruggedized construction and straightforward prototyping are priorities.
Internally, each channel is high gain and frequency compensated. This compensation allows operation as a unity-gain buffer without an external stability network, simplifying voltage followers, cross-coupled amplifiers, integrators with suitable added components, and closed-loop sensor-conditioning circuits. Designers must still account for output swing, input common-mode range, load capability, and the effects of finite open-loop gain and output-current limits.
Typical uses include low-frequency sensor amplifiers, DC voltage buffers, audio preamplifier stages, analog-to-digital converter input conditioning, temperature-sensor interfaces, and general laboratory instrumentation. Two amplifiers in one package can reduce component count when the circuit requires closely related positive and negative signal channels or duplicated low-frequency amplification functions.
PCB design should provide a stable return path, decouple the power pins close to the device, and avoid long input traces that can increase noise pickup. Because this is a through-hole package, component height and lead-bend clearance should be checked against the mechanical envelope of the assembly. Input and output signals should remain within the operating limits published in the manufacturer datasheet.
This page organizes the verified device identity, package, electrical headline specifications, sourcing guidance, drop-in candidates, and practical engineering considerations into a concise reference for selecting and implementing the LM358H/NOPB.
Mga alternatibo na pwedeng ilagay na LM358H/NOPB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LM358H/NOPB (parehas na form factor at footprint).
LM358H
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LM358H/OPB
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM358AH
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM358AH/OPB
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
LM358H/NOPB Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 32 V |
| Gain-Bandwidth Product | 1 MHz |
| Hanay ng Temperature na Operasyon | 0 °C to 70 °C |
| Package Type | TO-99-8 metal can |
| Total Pin Count | 8 pins |
| Uri ng Pagpapasok | Through-hole |
Pin Configuration ng LM358H/NOPB
| Pin 1 | OUT1 — Amplifier 1 output |
| Pin 2 | IN1- — Inverting input of amplifier 1 |
| Pin 3 | IN1+ — Noninverting input of amplifier 1 |
| Pin 4 | GND — Ground connection |
| Pin 5 | IN2+ — Noninverting input of amplifier 2 |
| Pin 6 | IN2- — Inverting input of amplifier 2 |
| Pin 7 | OUT2 — Amplifier 2 output |
| Pin 8 | V+ — Positive supply connection |
Tipikal na mga Gamit
LM358H/NOPB ay nararapat para sa 6 aplikasyons: Resistive Sensor Signal Conditioning, Audio Preamplifier, ADC Input Buffer, Active Filtering, Industrial Control Signal Interface, Temperature Measurement Front End.
Resistive Sensor Signal Conditioning
The LM358H/NOPB fits resistive-sensor front ends that require buffering rather than high bandwidth. Its two independent channels can condition two sensor outputs, while the 1-MHz gain-bandwidth product provides margin for low-frequency excitation and closed-loop gain settings. The 32-V maximum supply rating also allows operation from higher-voltage analog rails when the sensor and input common-mode limits permit it. Use one channel as a voltage follower at the sensing element and the second for signal amplification or active filtering. Keep high-impedance traces short, provide a nearby ground reference, and verify input bias current, offset voltage, and common-mode range before finalizing the sensor interface.
Inirekomenda
Audio Preamplifier
The LM358H/NOPB can provide a low-frequency audio preamplifier stage when the signal path does not require high slew rate or wide bandwidth. Its 1-MHz gain-bandwidth product supports moderate closed-loop gains, and the dual configuration permits gain in one channel and active filtering or buffering in the other. The 32-V supply capability permits connection to conventional higher-voltage analog rails, subject to the datasheet limits. Keep the input network close to the amplifier, maintain a low-impedance ground return, and check the output swing against the next stage. Its through-hole TO-99 format is particularly useful in vintage-style, laboratory, and educational audio equipment.
Inirekomenda
ADC Input Buffer
The LM358H/NOPB is appropriate for buffering moderate-bandwidth analog signals before an ADC input. A voltage follower isolates the source from the converter's switched-input network, while the second channel can provide gain or an anti-alias filter. The 1-MHz gain-bandwidth product is sufficient for many low- and medium-frequency acquisition channels, and the 32-V rating supports higher-voltage sensor interfaces when the common-mode range remains valid. Place the amplifier close to the ADC, route the analog signal over a continuous ground plane, and isolate high-speed digital and switching paths. Input offset, bias-current error, output settling, and ADC acquisition time must be included in the system error budget.
Inirekomenda
Active Filtering
The LM358H/NOPB can implement first- and higher-order low-frequency active filters because it provides two internally compensated amplifiers in one package. The 1-MHz gain-bandwidth product supports cutoff frequencies well below the amplifier's unity-gain bandwidth, allowing passive RC networks to set the response. The two channels can form a second-order section, while a separate section can amplify the resulting signal. Component tolerances, op-amp gain error, output loading, and common-mode headroom determine the practical filter accuracy. Keep the RC components close to their associated pins and avoid sharing sensitive filter nodes with noisy inputs. Verify closed-loop gain and stability across the full supply and temperature range.
Inirekomenda
Industrial Control Signal Interface
The LM358H/NOPB fits general industrial control modules that amplify or buffer low-frequency command and feedback signals. Its 32-V maximum supply rating and 0 °C to 70 °C operating range align with many commercial control boards, while the dual channel count supports signal conditioning for both command and monitoring paths. The TO-99 package provides a simple through-hole implementation for prototypes, test fixtures, and legacy-style control equipment. Connect the amplifier ground to the analog return reference, maintain input common-mode voltage within its operating region, and leave output-swing margin for downstream loads. For systems with significant electrical noise or temperature variation, perform a complete offset, drift, noise, and transient-response evaluation.
Inirekomenda
Temperature Measurement Front End
The LM358H/NOPB can amplify the small voltage produced by resistive temperature sensors and bridge-style sensing elements. One channel may buffer the sensor, while the other amplifies the differential or referenced signal toward an ADC or comparator. The 1-MHz gain-bandwidth product is more than adequate for typical thermal measurement bandwidths, and the dual arrangement reduces the number of separate amplifier packages. Choose resistor values that keep the sensor operating point inside the amplifier's input common-mode range, and account for input offset and bias-current errors relative to the sensor impedance. Maintain uniform thermal coupling and avoid routing the measurement path beside regulators, switching inductors, or high-current motor wiring.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LM358H/NOPB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LM358H | LM358H/OPB | LM358AH | LM358AH/OPB |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TO-99-8 | TO-99-8 | TO-99-8 | TO-99-8 | TO-99-8 |
| Amplifier Configuration | Dual | Dual | Dual | Dual | Dual |
| Maximum Supply Voltage | 32 V | 32 V | 32 V | 32 V | 32 V |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | 1 MHz | 1 MHz |
| Mounting Type | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
| Total Pin Count | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins |
| Special Ordering Option | NOPB ordering code | Non-suffixed ordering code | OPB ordering code | AH temperature-grade ordering code | AH temperature-grade and OPB ordering code |
Pangunahing mga Pagkakaiba
- Matches the established LM358H TO-99 footprint (kumpara saLM358H)
- Provides an ordering-compatible same-package option (kumpara saLM358H/OPB)
- Offers a temperature-grade pathway for wider environments (kumpara saLM358AH)
Talaan ng Disenyo
Assign the TO-99 pin holes directly from the LM358 datasheet pin table and preserve the metal-can orientation when the device is inserted. Keep each amplifier's feedback components close to the relevant output and inverting-input pins, because long feedback traces increase parasitic coupling and can affect stability. Route OUT1 and OUT2 away from IN1+ and IN2+, and maintain a continuous ground reference beneath the sensitive signal paths.
Place the supply-bypass capacitor as close as practical to pin 8 and connect pin 4 to the quiet analog ground reference. The bypass connection must be short because lead inductance can turn an otherwise effective decoupling capacitor into a poor high-frequency bypass. Confirm the selected capacitor's voltage rating against the operating supply and verify the complete power-supply network with an oscilloscope at the device pins.
Do not substitute an LM358 in SOIC or dual-inline package without redesigning the PCB footprint; logical pin compatibility does not make those packages mechanically interchangeable with TO-99. Also check whether the replacement ordering code has the required temperature grade and sourcing qualification. Input common-mode voltage and output swing are separate constraints, so a supply within the 32-V rating does not by itself guarantee correct operation.
For low-level sensor measurements, use a shielded or tightly routed input and connect the sensor return directly to the analog ground node. High source impedance increases sensitivity to input bias current, while long traces increase leakage and noise pickup. Evaluate offset drift and bias-current error against the smallest signal of interest, and use the second amplifier channel for gain or filtering only when its bias and return connections remain suitably balanced.
Impormasyon ng Pagsunod sa Kautusan
The ordering code includes an NOPB designation, but formal RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established by the manufacturer documents listed for this record.