Texas Instruments

LM393TL/NOPB - Dual Open-Collector Comparator, 8-DSBGA | Texas Instruments

MPN: LM393TL/NOPB ✓ Nakahanda
2 V to 36 V Vdss 8-DSBGA (8 large 12 mil bumps), thin Package
MOQ: 1 |

LM393TL/NOPB Ulas

Texas Instruments LM393TL/NOPB is a dual differential voltage comparator in an 8-ball DSBGA package, providing two independent comparator channels with an input offset voltage specified as low as 2.0 mV max and an open-collector, rail-to-rail output stage. The device operates from a single 2 V to 36 V supply (or ±1 V to ±18 V from dual supplies) and is designed specifically for single-supply operation across a wide voltage range.

A comparator is a differential amplifier whose output indicates which of two input voltages is higher. A voltage comparator belongs to the amplifier IC family, sits below the broader analog IC grouping, and ultimately falls under the semiconductor hierarchy. Because a comparator output is digital in nature while its inputs are analog, comparators bridge the analog and digital domains and are widely used for thresholding, level detection, sensor conditioning and open-drain bus arbitration.

The LM393-N series places two independent precision comparators on one die, each with its own differential input pair and open-collector output. Key features include a low offset voltage, low supply current, a wide common-mode input voltage range that includes ground, and an output stage compatible with CMOS, DTL, ECL, MOS and TTL logic families. Because the outputs are open collector, the output high level is set by an external pull-up resistor, allowing wired-AND busing and level shifting to any supply rail.

Internally, each channel uses a differential input stage with a precision trim and a broadband output stage designed for moderate propagation delay. This architecture trades speed for very low supply current, which is exactly what makes the LM393 family popular in battery-powered and always-on monitoring circuits. The 8-DSBGA package places the device in a thin, compact footprint of only 8 large (12 mil) bumps, which is ideal for space-constrained handheld and portable equipment where a dual comparator saves both board area and part count.

Typical applications include window comparators for battery monitoring, over/undervoltage protection, temperature threshold detection with thermistors, zero-cross detection in AC mains circuits, sorting and level shifting, and general-purpose dual-rail sensing in consumer and industrial equipment. Each channel can be used independently, so one half may act as a comparator while the other provides an independent reference or supervisory function.

When designing around the LM393TL/NOPB, remember that the open-collector output requires an external pull-up resistor, typically 2 kΩ to 10 kΩ, and that input common-mode range and output saturation levels depend on the supply voltage. Because the DSBGA package has no large thermal pad, keep instantaneous dissipation low and maintain adequate board area for heat spreading.

This page consolidates manufacturer specifications, drop-in alternatives, a parameter-by-parameter comparison table, and practical PCB and application guidance that are not assembled in one place on the manufacturer datasheet, helping engineers qualify the LM393TL/NOPB for portable sensing, protection and interface designs.

Mga alternatibo na pwedeng ilagay na LM393TL/NOPB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LM393TL/NOPB (parehas na form factor at footprint) — pagkakaiba sa Output Type, Package, Input Offset Voltage.

STMicroelectronics
Output Type: Open Collector
Package: SOIC-8
Input Offset Voltage: 2 mV (typical)
Texas Instruments
Output Type: Open-collector
Package: 8-DSBGA

LM393TLX/NOPB

✅ Drop-In
Texas Instruments
📦 8-DSBGA
General-purpose differential comparator · 2 · 2 V to 36 V · ±1 V to ±18 V · Rail-to-rail · Open-collector · CMOS, DTL, ECL, MOS, open-collector, and TTL · 2.0 mV

Magkontak para sa presyo

Tingnan ang Datasheet →

LM393DT

✅ Drop-In
STMicroelectronics
📦 8-DSBGA
2 · 2 V to 36 V · ±1 V to ±18 V · 0.4 mA (typical) · 2 mV (typical) · 25 nA (typical) · 1.3 µs (typical) · Open Collector

✓ Sa Stock

$0.0461 / Yunit

Tingnan ang Datasheet →

LM393B

✅ Drop-In
📦 8-DSBGA
Enhanced LM393B variant listed by the manufacturer in the same family comparison; input offset and supply range matched within the family, DSBGA option availability per manufacturer ordering information

📋 Alternatibo na Reference (hindi sa katalogo)

LM393LV

✅ Drop-In
📦 8-DSBGA
Lower-voltage LM393LV family option listed by the manufacturer as an alternate GPN; lower supply ceiling than the 36 V LM393TL/NOPB but same dual comparator architecture and pin structure

📋 Alternatibo na Reference (hindi sa katalogo)

LMV393

✅ Drop-In
📦 8-DSBGA
CMOS dual comparator, pin-compatible and open-drain output, but supply ceiling reduced to 16 V and supply current far lower than the bipolar LM393TL/NOPB (about 20x lower per replacement guides)

📋 Alternatibo na Reference (hindi sa katalogo)

LM393TL/NOPB Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Dual differential voltage comparator
Number of Channels 2
Supply Voltage Range (Single) 2 V to 36 V
Supply Voltage Range (Dual) +/-1 V to +/-18 V
Type ng Output Open-Collector (CMOS, DTL, ECL, MOS, TTL compatible)
Input Offset Voltage 2.0 mV max
Common-Mode Input Range Includes ground (rail-to-rail input)
Packhaging 8-DSBGA (8 large 12 mil bumps), thin
Number of Pins / Balls 8
Uri ng Pagpapasok Surface Mount
Grade Commercial
Product Family LM193 / LM2903 / LM393 series
Output Pull-Up Requirement External pull-up resistor required (open collector)

Gabay sa Pin Configuration ng LM393TL/NOPB 8-dsbga (8 large 12 mil bumps), thin

Pin configuration para sa LM393TL/NOPB (8-dsbga (8 large 12 mil bumps), thin package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-dsbga (8 large 12 mil bumps), thin package para sa LM393TL/NOPB

Wala ng detalyadong pinout data na magagamit para sa LM393TL/NOPB.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LM393TL/NOPB ay nararapat para sa 6 aplikasyons: Battery Undervoltage and Overvoltage Detection, Over/Undervoltage Protection and Power Sequencing, Temperature Threshold Sensing with Thermistors, Portable and Wearable Sensor Interfaces, Zero-Cross and AC Sensing Circuits, Consumer and Industrial Equipment Level Shifting.

⚡

Battery Undervoltage and Overvoltage Detection

The LM393TL/NOPB suits single-cell and multi-cell battery supervision because its 2 V to 36 V single-supply range lets one device monitor a pack directly, and its common-mode input range includes ground so a resistive divider to the cell terminal can be compared directly against a precision reference. The 2.0 mV max input offset keeps the trip point error small relative to typical Li-ion cell spacing of a few hundred millivolts. Each of the two independent channels can implement the overvoltage and undervoltage thresholds, and because both outputs are open collector they can share one pull-up resistor to produce a single combined fault flag, eliminating a separate logic gate.

🔧

Over/Undervoltage Protection and Power Sequencing

Protecting downstream loads from out-of-range rails is a classic dual-comparator job, and the LM393TL/NOPB performs both thresholds in one 8-DSBGA package. One channel watches the rail high side and the other the low side, with the reference divider sized for the tolerance needed. The open-collector outputs can pull down a shared reset or power-good node directly, which is simpler and lower power than driving a rail actively. With a 2.0 mV max input offset the sensing error is negligible next to typical protection window tolerances, so no trimming is required in most designs.

💊

Temperature Threshold Sensing with Thermistors

The low offset voltage of the LM393TL/NOPB makes it effective for thermistor-based thermal monitoring, where the thermistor divider sits at a few volts and the detection band can be only tens of millivolts wide. Two channels allow separate high-temperature and low-temperature alarm points with independently chosen dividers. Because the comparator input common-mode range extends to ground, one channel can monitor a cold-junction or ambient sensor near 0 V without a level shift. Open-collector outputs also let the alarms be wired-AND into a single interrupt line, freeing a microcontroller pin and reducing interrupt handling complexity.

📱

Portable and Wearable Sensor Interfaces

In handheld and wearable products the 8-DSBGA package of the LM393TL/NOPB is a significant space advantage over an SOIC-8 dual comparator, saving roughly half the footprint area while still providing two channels. The family was designed for single-supply operation over a wide range of voltages, so a 3.3 V or 1.8 V system can run the comparator straight from the main rail rather than requiring a boosted supply. The thin DSBGA outline also keeps the stack-up shallow, which suits wearables where board-to-case clearance is tight. Care is needed at assembly because the 8 large bumps still demand fine-pitch placement capability.

🏭

Zero-Cross and AC Sensing Circuits

The LM393TL/NOPB is routinely used for zero-cross detection and AC sensing because its wide supply tolerance and low offset allow a scaled AC waveform to be compared against ground with minimal distortion of the zero-cross point. The open-collector output drives a pull-up, and the resulting pulse train is convenient for driving a timer input or an optocoupler LED stage. Because the device accepts dual supplies of +/-1 V to +/-18 V, it can also be biased directly on a +/-12 V mains-derived sensing node, removing the need for a separate level shifter. The same technique is applied in motor control and dimming circuits.

🌐

Consumer and Industrial Equipment Level Shifting

When a sensor or logic domain runs at a different voltage than the host controller, the LM393TL/NOPB open-collector output provides a simple, low-power level shifter: pull the output up to the destination supply and the comparator sinks current from the higher-voltage domain. The outputs are compatible with CMOS, DTL, ECL, MOS and TTL logic families, so the same part works across mixed vintage logic. Two channels in one 8-DSBGA package reduce part count in equipment where several lines need translation, which helps both BOM cost and PCB density in industrial control panels and consumer set-top devices.

Buod ng mga Inirekomendang Produkto

LM393TLX/NOPB Texas Instruments Ginagamit sa: Battery Undervoltage and Overvoltage Detection, Temperature Threshold Sensing with Thermistors LM393 Texas Instruments Ginagamit sa: Battery Undervoltage and Overvoltage Detection, Temperature Threshold Sensing with Thermistors, Portable and Wearable Sensor Interfaces, Consumer and Industrial Equipment Level Shifting LM393B Enhanced family variant for protection margin requirements Ginagamit sa: Over/Undervoltage Protection and Power Sequencing, Zero-Cross and AC Sensing Circuits LM393LV Lower-voltage variant for sub-16 V rails Ginagamit sa: Over/Undervoltage Protection and Power Sequencing, Zero-Cross and AC Sensing Circuits LM393TL/NOPB Texas Instruments Ginagamit sa: Portable and Wearable Sensor Interfaces LMV393 Low-power CMOS alternative for low-voltage level shifting Ginagamit sa: Consumer and Industrial Equipment Level Shifting
What is the LM393TL/NOPB?
The LM393TL/NOPB is a Texas Instruments dual differential voltage comparator packaged in an 8-DSBGA thin ball grid array with 8 large 12 mil bumps. Each of the two channels takes two inputs and produces an open-collector output that indicates which input is higher. According to the manufacturer part details page for LM393-N, the series was designed specifically for operation from a single power supply over a wide range of voltages.
What is the supply voltage range of LM393TL/NOPB?
The LM393TL/NOPB operates from 2 V to 36 V on a single supply, and from +/-1 V to +/-18 V when powered from dual supplies. According to the Texas Instruments LM393 data sheet and product page, the wide single-supply range allows the comparators to be used directly from a single lithium cell through industrial 36 V rails, while the dual-supply capability supports legacy +/-5 V and +/-12 V analog designs.
What is the input offset voltage of the LM393?
The input offset voltage is specified as low as 2.0 mV max for the LM393-N series. According to Texas Instruments, the LM193/LM2903/LM393 family was designed specifically to achieve this low offset while operating from a single power supply over a wide range of voltages. A 2 mV offset keeps threshold errors small relative to most sensor and supply-monitoring signals.
Why does the LM393TL/NOPB use an open-collector output?
The open-collector output allows the output high level to be set by an external pull-up resistor rather than being actively driven. According to the LM393 data sheet, the output is compatible with CMOS, DTL, ECL, MOS and TTL logic families, so one pull-up value can interface the comparator to almost any digital family. It also lets several comparator outputs share a single bus for wired-AND operation.
What is the difference between LM393TL/NOPB and LM393TLX/NOPB?
Both parts are the same Texas Instruments LM393-N dual comparator in the same 8-DSBGA package with identical electrical ratings; the difference is the shipping format. The TL suffix denotes the tray packing and the TLX suffix denotes the tape-and-reel packing. Both appear as separate orderable entries on the manufacturer part details page, so either can be used on the same PCB footprint.
Do I need an external pull-up resistor with the LM393TL/NOPB?
Yes, an external pull-up resistor is required because the LM393 output stage is open collector and cannot source current. The manufacturer data sheet describes outputs compatible with CMOS, DTL, ECL, MOS and TTL, which requires the pull-up to set the high level. A value in the range of a few kilohms is typical; use the data sheet guidance and the desired rise time for the connected logic family to finalize the value.
What is the LM393TL/NOPB pinout?
The LM393TL/NOPB uses an 8-ball DSBGA layout with two independent comparator channels, each with a non-inverting input, an inverting input and an open-collector output, plus the supply and ground balls. The exact ball assignments for the DSBGA land pattern are given in the pin configuration section of the manufacturer data sheet for the LM393-N series; use that ball map directly when assigning PCB tracks and when defining the library footprint.
Where can I download the LM393TL/NOPB datasheet?
The LM393TL/NOPB data sheet is available from the Texas Instruments product page for LM393 and from the manufacturer part details listing for LM393TL/NOPB, which links directly to the PDF for the LM393-N series. Third-party document mirrors also host a copy of the same PDF. Using the manufacturer copy ensures you get the current revision with the most up-to-date ordering and quality information.
Is the LM393TL/NOPB still active?
Yes, the LM393TL/NOPB is listed as a current, orderable part on the Texas Instruments LM393-N part details page, which is the commercial-grade variant of the LM193/LM2903/LM393 series. The 8-DSBGA ordering option is presented as an active package option for the family, alongside the standard surface-mount and through-hole lead styles.
Where can I buy LM393TL/NOPB and what is the lead time?
Use the Request a Quote form on this page for current availability, pricing and lead time for the LM393TL/NOPB, and confirm the desired packing format and quantity before placing an order. Because the 8-DSBGA variant is a specialty package, stocking levels and lead times can differ significantly from the more common plastic small-outline packages of the same comparator.
What is the price of LM393TL/NOPB?
Pricing for the LM393TL/NOPB is generated live and is not fixed on this page. Submit a Request a Quote with your required quantity and package packing format and you will receive current pricing together with the supplier channel options for the 8-DSBGA variant. Volume commitments, reel versus tray packing and sourcing volume all affect the final quoted figure.
Is LM393TL/NOPB in stock?
Live stock status for the LM393TL/NOPB is not published on this page because the part is a specialty 8-DSBGA package. Use the Request a Quote form on this page and state the quantity, packing format (tray or reel) and target date to receive a current availability and lead time confirmation from the sourcing desk.
LM393TL/NOPB vs LMV393 - which is better for a 5 V design?
The LM393TL/NOPB is a bipolar open-collector comparator with a 2 V to 36 V supply range, while the LMV393 is a CMOS dual comparator that works from 2.7 V to 16 V and consumes far less current. According to LM393 replacement guides, the LMV393 can be treated as a drop-in for 5 V systems where supply current dominates. For wider supply ranges or bipolar input swings, the LM393TL/NOPB remains the more flexible choice.
What is the best drop-in replacement for LM393TL/NOPB?
The closest drop-in replacements for the LM393TL/NOPB are the other Texas Instruments orderable variants of the same LM393-N die in the same 8-DSBGA package, including the tape-and-reel LM393TLX/NOPB and the LM393 family DSBGA option. Because the 8-DSBGA footprint is unusual, most third-party dual comparators ship in SOIC or SOT packages and would require a board layout change rather than a true drop-in swap.
When should I choose LM393TL/NOPB over a SOIC-8 LM393?
Choose the LM393TL/NOPB when board area is the binding constraint and the device is hand-mounted or assembled in low volume where the 8-DSBGA land pattern is acceptable. For automated high-volume surface-mount assembly, an SOIC-8 or SOT-23-5 dual comparator is usually more practical because DSBGA packages demand fine-pitch placement capability and are not universally supported by pick-and-place lines.
Can the LM393TL/NOPB be used for battery undervoltage detection?
Yes, the LM393TL/NOPB is well suited to battery monitoring because it runs from 2 V to 36 V on a single supply and its common-mode input range includes ground, so both cell voltage and a divided reference can be sensed directly. Because the output is open collector, the two channels can drive a shared pull-up and combine into a single over/undervoltage flag without additional logic.
What are the key specifications of LM393TL/NOPB that engineers should know?
The key LM393TL/NOPB specifications are: two independent differential comparator channels, an input offset voltage as low as 2.0 mV max, a 2 V to 36 V single-supply operating range (or +/-1 V to +/-18 V dual), an open-collector output compatible with CMOS, DTL, ECL, MOS and TTL logic, and an 8-DSBGA package with 8 large 12 mil bumps. The output requires an external pull-up resistor to set the logic high level.

Impormasyon ng Talumpati sa Engineering for LM393TL/NOPB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LM393TL/NOPB when your design needs two independent comparator channels, a supply above 16 V or a dual-supply bipolar sensing node, and the smallest available footprint for the LM393 family. Its 2.0 mV max input offset, ground-referenced common-mode range and open-collector outputs make it a reliable choice for battery monitoring, protection windows, thermistor thresholds and general level shifting where the pull-up rail is chosen by the design.

Select LM393TLX/NOPB instead when the same 8-DSBGA part is needed in tape-and-reel format for volume assembly - the electrical behaviour is identical and only the packing changes. Choose LM393LV when you work only below roughly 16 V and want the lower-voltage family option, accepting reduced flexibility for bipolar sensing. Choose LMV393 when supply current dominates the design, for example in battery-powered wearables, since the CMOS implementation draws roughly twenty times less current, but verify that the CMOS input common-mode range and output levels suit your node.

For most new designs that do not need the sub-1 cm-squared footprint, an SOIC-8 or SOT-23-5 dual comparator is easier to assemble and source in volume; the LM393TL/NOPB earns its place when area, not assembly convenience, is the binding constraint.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LM393TLX/NOPB LM393 LM393B LM393LV LMV393
Package 8-DSBGA (8 large 12 mil bumps) 8-DSBGA (8 large 12 mil bumps) - same 8-DSBGA thin BGA option - same 8-DSBGA (family option) - same 8-DSBGA (family option) - same 8-DSBGA (family option) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Channels 2 2 2 2 2 2
Supply Voltage Range 2 V to 36 V (single), +/-1 V to +/-18 V (dual) 2 V to 36 V (single) 2 V to 36 V (single) 2 V to 36 V (single) Lower-voltage family option 2.7 V to 16 V
Output Type Open-Collector (CMOS, DTL, ECL, MOS, TTL compatible) Open-Collector Open-Collector Open-Collector Open-Collector family architecture Open-Drain CMOS

Pangunahing mga Pagkakaiba

  • Two independent channels in a compact 8-DSBGA footprint (kumpara saLM393TLX/NOPB)
  • Wider supply ceiling than CMOS dual comparators (kumpara saLMV393)
  • Lower offset and dual-supply flexibility versus low-voltage family options (kumpara saLM393LV)
  • Single-supply design intent across a very wide voltage range (kumpara saLM393)

Talaan ng Disenyo

The single most common mistake with the LM393TL/NOPB is forgetting the external pull-up resistor on the open-collector output. Without it the output node floats and the comparator appears to malfunction. Select a pull-up between roughly 2 kOhm and 10 kOhm, or larger for slower, lower-power switching. A second common trap is driving an LED or relay directly from the output: because the stage only sinks current, use the device to sink through the load to ground and pull the load up to the supply, and check the sink current against the output rating.

The 8-DSBGA package has 8 large 12 mil bumps with no exposed thermal pad, so thermal relief is limited to the bump footprint and thin board copper. Keep copper pour and thermal vias minimal but present under and around the package to spread the small dissipation of a comparator, and keep the layout compact so the low-capacitance inputs are not routed over noisy switching nodes. Provide a solid ground reference plane directly under the device so the common-mode performance and offset behaviour of both channels are not degraded by ground bounce.

Route the inverting and non-inverting inputs of each channel as a tight, closely-coupled pair to minimize pickup of differential noise, since the whole benefit of the 2.0 mV max offset specification is lost if the comparator is comparing two noisy, uncorrelated signals. Keep these nets away from switching node inductors, relay contacts and high-current return paths. Where the sensed signal is high impedance, add a small guard ring or driven shield around the input pad and keep the pull-up resistor on the output physically remote from the input pins.

Estimated: with a 12 V supply, a 5 V output pull-up and a 10 mA sink on one channel, the output transistor dissipates roughly (12 V - 5 V) x 10 mA = 70 mW. While this is small, the total dissipation of both channels plus bias current still sets the die temperature inside the thin DSBGA package, which has no dedicated heat path. Estimated: at 70 mW per channel and 2 channels the junction rise stays well within limits for a 1 oz copper DSBGA land pattern, but verify against the ambient temperature limit of your grade before using this estimate in a safety margin calculation.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

LM393TL/NOPB is a commercial-grade part on the Texas Instruments LM393-N family page. The NOPB suffix denotes a lead-free finish in the TI ordering code system, but RoHS, REACH and halogen-free declarations are not reproduced in the manufacturer material available for this listing, so they are recorded as unknown rather than assumed. AEC-Q100 does not apply to this commercial-grade device.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LM393TL/NOPB LM393TL/NOPB datasheet LM393TL/NOPB datasheet pdf LM393TL/NOPB pinout LM393TL/NOPB equivalent LM393TL/NOPB replacement LM393TL/NOPB cross reference LM393TL/NOPB price LM393TL/NOPB stock Texas Instruments LM393TL/NOPB LM393 8-DSBGA dual comparator LM393 open collector 36V comparator LM393TL/NOPB vs LM393TLX/NOPB LM393TL/NOPB vs LMV393 LM393TL/NOPB application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments LM393TL/NOPB LM393TLX/NOPB LM393 LM393B LM393LV LMV393 LM193 LM2903 voltage comparator differential comparator open-collector output open-drain output amplifier IC analog IC semiconductor DSBGA thin BGA surface mount SMD input offset voltage common-mode input range single power supply pull-up resistor battery monitoring
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ