LPC1102UK - 50MHz Cortex-M0 MCU with 32KB Flash | NXP
MPN: LPC1102UK ✗ Tapus ng BuhayLPC1102UK Ulas
A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, digital peripherals, and interface controllers on one die. The LPC1102UK belongs to the LPC11xx family of Arm Cortex-M0 devices. Its compact instruction set and integrated memory support embedded control, while its 32-bit architecture provides a practical migration path from legacy 8-bit and 16-bit designs.
The verified product information identifies the Arm Cortex-M0 processor, 50 MHz maximum operating frequency, 32 KB flash, 8 KB SRAM, and 16-WLCSP package. The NXP product page also describes the LPC11xx family as a low-power, low-cost family designed for 8-bit and 16-bit microcontroller replacements, with reduced code size and a scalable entry-level feature set.
Compared with larger general-purpose Cortex-M devices, the LPC1102UK emphasizes simplicity, compactness, and low cost. Its 2.17 mm by 2.32 mm uncased chip package minimizes PCB area but requires assembly processes capable of handling very small pitch balls and fine board-routing features. The package page identifies this option as 16-pin WLCSP, making land-pattern and assembly verification essential before release to production.
Typical uses include small sensor controllers, compact industrial modules, building-control endpoints, appliance control boards, and connected low-power products. Engineers should account for restricted memory, small-package assembly, exposed-pad or thermal considerations, and firmware complexity when selecting this device.
The key design priority is to validate code size, peripheral requirements, clocking, power behavior, and PCB assembly before committing the very small footprint. Use NXP's product page and LPC1102UK datasheet as the controlling references for electrical limits, pin functions, package dimensions, and programming support.
This page consolidates verified source data, technical context, procurement facts, and engineering cautions that are not presented as one unified document by the distributor listings. It helps buyers distinguish the confirmed LPC1102UK capabilities from specifications that still require direct datasheet verification.
Mga alternatibo na pwedeng ilagay na LPC1102UK — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
LPC1102UK
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LPC1102UK,118
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
OL-LPC1102UK
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LPC1102
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LPC1102/UM
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LPC1102UK Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| CPU Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 50 MHz |
| Architecture | 32-bit |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| SRAM | 8 KB |
| Packhaging | 16-WLCSP (2.17 mm x 2.32 mm) |
| Package Type | WLCSPUncased Chip |
| Package Pin Count | 16 pins |
| Katayuan ng Lifecycle | NRND |
Gabay sa Pin Configuration ng LPC1102UK 16 pins
Pin configuration para sa LPC1102UK (16 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa LPC1102UK.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LPC1102UK ay nararapat para sa 6 aplikasyons: Compact Sensor Controller, Building-Control Endpoint, Appliance Control Board, Battery-Powered IoT Module, Low-Cost Data Logger, Communication Interface Module.
Compact Sensor Controller
The LPC1102UK fits compact sensor nodes where board area and firmware complexity must remain small. Its 50 MHz Arm Cortex-M0 core provides more processing headroom than a basic 8-bit controller, while 32 KB flash and 8 KB SRAM support acquisition logic, calibration state, and a lightweight communications state machine. In a typical design, the MCU digitizes sensor inputs, applies filtering, stores configuration in nonvolatile memory, and reports results through a low-speed serial interface. The 16-WLCSP package measures 2.17 mm by 2.32 mm, but its fine assembly requirements can outweigh any board-space savings unless the assembly line supports the package and the firmware remains comfortably within the 32 KB program-memory budget.
Inirekomenda
Building-Control Endpoint
The LPC1102UK is appropriate for distributed building-control endpoints that monitor inputs and drive discrete outputs without requiring a high-power processor. Its 32-bit Cortex-M0 architecture can handle debouncing, state transitions, timers, communication scheduling, and diagnostic flags, while the 50 MHz operating rate leaves practical headroom for interrupt-driven control. A typical circuit would connect the MCU to sensors, relay or triac drivers, and a bus transceiver, with firmware enforcing startup delays and safety interlocks. The 8 KB SRAM may become restrictive if extensive buffering or complex network stacks are needed, so code-size and peak-memory measurements should be completed against the intended compiler and library configuration before layout release.
Inirekomenda
Appliance Control Board
The LPC1102UK can serve as the central controller in a compact appliance when the design requires deterministic real-time behavior, modest memory, and low component cost. Its Cortex-M0 core at up to 50 MHz can execute motor-step timing, button handling, temperature monitoring, fault detection, and state-machine control without an operating system. In this use, firmware should prioritize deterministic interrupts and bounded execution times, while the PCB provides careful decoupling, grounded return paths, and protection from motor-switching transients. Compared with a larger MCU, the LPC1102UK offers a simpler solution but supplies only 32 KB flash and 8 KB SRAM; adding protocol stacks, graphical displays, or extensive logs may require a higher-memory device.
Inirekomenda
Battery-Powered IoT Module
The LPC1102UK can fit a small battery-powered IoT module when its workload is limited to sensing, local logic, and intermittent communication. The 50 MHz Cortex-M0 core supports responsive peripheral handling, while 8 KB SRAM is adequate for many short message buffers but not for demanding edge processing. Firmware should place the processor in low-power states between events and use timer-driven wakeups to avoid unnecessary active time. Before selecting it, verify the exact low-power modes, active and sleep currents, wake-up sources, and analog characteristics in the manufacturer datasheet because these values are not present in the supplied source excerpts. The WLCSP package helps miniaturization, although battery products also require careful leakage-current analysis and mechanical protection.
Inirekomenda
Low-Cost Data Logger
The LPC1102UK is viable for a compact data logger that records bounded sensor or event data and periodically transmits it. Its 32 KB flash can hold firmware and limited nonvolatile data, while 8 KB SRAM can hold acquisition buffers, counters, and communication frames. A practical implementation should measure normal and worst-case firmware memory, avoid allocating near the SRAM limit, and define flash wear controls if persistent records are updated frequently. The 50 MHz core provides enough instruction throughput for many control tasks, but the MCU's small package and limited memory make it less suitable than a larger device for large histories, high-rate sampling, or complex protocols. The choice should follow measured data rate, retention period, and transmission workload.
Inirekomenda
Communication Interface Module
The LPC1102UK can act as a small protocol or command interface when the surrounding transceiver performs the physical-layer work. At up to 50 MHz, the Cortex-M0 core can frame packets, validate commands, update local state, and expose diagnostics through serial or parallel signals. Its 32 KB flash and 8 KB SRAM are suitable for compact protocol stacks but require disciplined buffer allocation and library selection. During PCB design, place the MCU and decoupling close to the connector or transceiver, maintain short return paths, and isolate high-current switching sections from sensitive communications. Because the supplied excerpts do not enumerate the LPC1102UK peripheral set, engineers must verify UART, SPI, I2C, USB, and timer availability against the current datasheet before assigning interfaces.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LPC1102UK — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LPC1102UK | LPC1102UK,118 | OL-LPC1102UK | LPC1102 | LPC1102/UM |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 16-WLCSP (2.17 mm x 2.32 mm) | 16-WLCSP (2.17 mm x 2.32 mm) | 16-WLCSP (2.17 mm x 2.32 mm) | 16-WLCSP (2.17 mm x 2.32 mm) | 16-WLCSP (2.17 mm x 2.32 mm) | 16-WLCSP (2.17 mm x 2.32 mm) |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| Word Size | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Assembly Form | WLCSP uncased chip | WLCSP uncased chip | WLCSP uncased chip | WLCSP uncased chip | WLCSP uncased chip | WLCSP uncased chip |
Pangunahing mga Pagkakaiba
- Very compact verified package (kumpara saSTM32F072RBT6TR)
- 32-bit entry-level processing (kumpara saATMEGA328-AU)
- Memory footprint tailored to compact control (kumpara saSTM32F030R8T6TR)
Talaan ng Disenyo
Treat the LPC1102UK as a fine-pitch WLCSP design, not a conventional leaded-package replacement. Use NXP's OL-LPC1102UK package page to verify ball assignments, solder-mask and paste geometry, courtyard, and assembly tolerances. Keep escape traces short, avoid acute angles, and route sensitive signals away from switching nodes. The 2.17 mm by 2.32 mm package can save board area but may require smaller components, tighter inspection, and specialized assembly capability.
Validate the power tree against the manufacturer electrical limits before routing. The supplied excerpts do not provide the LPC1102UK supply range or current ratings, so do not assume a nominal rail or regulator output. Confirm the core and I/O voltage domains, decoupling values, startup sequencing, and maximum operating current directly from the current NXP datasheet. Place required bulk and high-frequency capacitors according to those limits, then check droop during wake-up and peripheral activity.
Memory capacity is a common design failure point for this part. Measure the linked firmware, stack, interrupt usage, and peak heap allocation against the verified 32 KB flash and 8 KB SRAM limits, leaving margin for diagnostics and future revisions. Avoid adding a communication stack or logging feature merely because the source fits at first build; test the worst-case runtime allocation and update path before committing the compact package.
Plan signal integrity around the actual interface speeds and external circuitry. Keep clock and communication routes short, provide continuous return paths, and place protection devices close to their connectors. If the MCU drives relays, displays, or other switching loads, separate high-current paths from sensitive control traces and use appropriate ground partitioning or filtering. Because pin-level peripheral assignments were not supplied here, verify every signal against the official package and datasheet before layout release.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified results identify the manufacturer, package, memory, core, frequency, pricing reference, and NRND lifecycle status, but do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.
