LPC1766FBD100K - 100MHz ARM Cortex-M3 256KB LQFP-100 | NXP
MPN: LPC1766FBD100K ✓ NakahandaLPC1766FBD100K Ulas
An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. The Cortex-M3 core uses the Thumb-2 instruction set and provides deterministic interrupt handling, while integrated flash, SRAM, peripherals, and communication interfaces reduce system complexity. The LPC1766 belongs to the NXP LPC17xx microcontroller family, combining an ARM processor core with Ethernet, USB, CAN, serial, analog, and timer resources.
The LPC1766FBD100K provides 256 KB of flash memory and 64 KB of data memory for code and working data. Its integrated Ethernet MAC supports network-connected equipment, while USB Device, Host, and OTG operation supports peripheral connectivity, USB storage, and host applications. The device also includes an 8-channel DMA controller, four UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, I2S support, an 8-channel 12-bit ADC, a 10-bit DAC, and motor-control PWM resources.
The 100 MHz Cortex-M3 core provides a practical balance of processing performance, memory capacity, and peripheral integration. It is suited to applications requiring multiple communication protocols, mixed analog and digital functions, or deterministic control without requiring a separate Ethernet controller, USB interface, or analog conversion system. The eight-channel ADC and motor-control PWM blocks are particularly useful in monitoring and actuator-control designs.
Typical uses include industrial Ethernet gateways, USB-to-serial data loggers, CAN-based industrial controllers, networked measurement equipment, motor-control systems, audio equipment using I2S, and connected consumer products. The LQFP-100 package provides exposed component leads and works with conventional reflow and inspection processes, while its 100-pin count supports the large number of communications and control functions.
Designers should use the manufacturer datasheet and pin-description tables when assigning PCB tracks, configuring peripheral multiplexing, and selecting decoupling. Verify the operating voltage, clock configuration, Ethernet PHY integration, USB transceiver requirements, and unused-pin treatment against the device documentation before releasing a layout. The LQFP-100 footprint also requires adequate thermal copper and assembly clearance because of its relatively large lead frame.
Mga alternatibo na pwedeng ilagay na LPC1766FBD100K — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
LPC1766FBD100,551
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
LPC1766FBD100K Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Core | ARM Cortex-M3 |
| Maksimum na Taktiko ng Oras | 100 MHz |
| Flash Memory | 256 KB |
| SRAM | 64 KB |
| Ethernet MAC | Integrated Ethernet MAC |
| USB Support | USB Device, Host, and OTG |
| DMA Controller | 8 channels |
| UART Interfaces | 4 channels |
| CAN Interfaces | 2 channels |
| SSP/SPI Interfaces | 3 channels |
| I2C Interfaces | 3 channels |
| ADC | 8-channel, 12-bit |
| DAC | 10-bit |
| PWM | Motor-control PWM |
| I2S Support | Integrated I2S interface |
| Packhaging | 100-LQFP, 14 mm x 14 mm |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng LPC1766FBD100K 100-lqfp, 14 mm x 14 mm
Pin configuration para sa LPC1766FBD100K (100-lqfp, 14 mm x 14 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa LPC1766FBD100K.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LPC1766FBD100K ay nararapat para sa 6 aplikasyons: Industrial Ethernet Gateway, USB Data Logger, CAN-Based Industrial Controller, Precision Measurement Instrument, Motor Control and Monitoring, Networked Audio and I2S Equipment.
Industrial Ethernet Gateway
The LPC1766FBD100K fits industrial Ethernet gateways because its 100 MHz Cortex-M3 core can supervise protocols while the integrated Ethernet MAC handles network traffic. Its 256 KB of flash supports gateway firmware, while 64 KB of SRAM accommodates protocol state and packet buffering. Four UARTs, two CAN channels, three I2C interfaces, and three SSP/SPI interfaces provide local sensor and actuator connectivity. The LQFP-100 package also exposes the required communications and control pins without requiring a very large board.
Inirekomenda
USB Data Logger
The LPC1766FBD100K is appropriate for a USB data logger because it supports USB Device, Host, and OTG alongside four UARTs and an eight-channel 12-bit ADC. The 100 MHz core can format collected measurements, while DMA helps move data efficiently between memory and peripherals. Its 256 KB flash stores application firmware and calibration tables, and 64 KB of SRAM supports temporary acquisition buffers. External memory can be added when long-term storage requirements exceed the internal resources.
Inirekomenda
CAN-Based Industrial Controller
The LPC1766FBD100K supports CAN-based industrial control with two CAN channels, three I2C interfaces, three SSP/SPI interfaces, and motor-control PWM. The 100 MHz Cortex-M3 core provides computational capacity for control logic, and the eight-channel 12-bit ADC supports analog feedback from sensors or power stages. An external CAN transceiver is still required for physical-layer communication, but the MCU integrates the protocol interface and firmware-facing peripherals in one package.
Inirekomenda
Precision Measurement Instrument
The LPC1766FBD100K suits precision measurement instruments that combine analog acquisition with network or serial data transfer. Its eight-channel 12-bit ADC supports multi-channel sensor measurement, while the 10-bit DAC can provide a basic control or reference output. Four UARTs and three SSP/SPI interfaces connect displays, storage devices, and precision converters, while the Ethernet MAC and USB OTG capability support configuration and data export. The 100 MHz core performs filtering and calibration without requiring a separate DSP.
Inirekomenda
Motor Control and Monitoring
The LPC1766FBD100K fits motor-control and monitoring designs because it combines motor-control PWM, an eight-channel 12-bit ADC, DMA, and a 100 MHz Cortex-M3 core. PWM outputs can command motor drivers or power stages, while ADC channels can monitor current, position, temperature, or supply feedback. Two CAN channels support distributed control, and the Ethernet MAC enables diagnostics to a supervisory system. The external power stage and isolation strategy remain application-specific design choices.
Inirekomenda
Networked Audio and I2S Equipment
The LPC1766FBD100K can support networked audio equipment because it integrates I2S, Ethernet MAC, USB Device or Host, and multiple serial interfaces. The 100 MHz Cortex-M3 core can manage control traffic and audio configuration, while 64 KB of SRAM supports short audio frames, protocol buffers, and control state. USB and Ethernet provide separate paths for local computer connectivity and network control. Audio-clock routing and peripheral multiplexing should be checked against the device pin table before layout approval.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LPC1766FBD100K — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LPC1766FBD100,551 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Core | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum Clock Frequency | 100 MHz | 100 MHz |
| Flash Memory | 256 KB | 256 KB |
| SRAM | 64 KB | 64 KB |
| Connectivity | Ethernet MAC, USB Device/Host/OTG, 4 UART, 2 CAN, 3 SSP/SPI, 3 I2C, I2S | Ethernet MAC, USB Device/Host/OTG, 4 UART, 2 CAN, 3 SSP/SPI, 3 I2C, I2S |
| Packing Difference | Brick packing | Tray packing; same device inside |
| Firmware Compatibility | LPC1766 Cortex-M3 application firmware | Same device; existing firmware expected to remain compatible |
| Analog and Control Resources | 8-channel 12-bit ADC, 10-bit DAC, motor-control PWM | 8-channel 12-bit ADC, 10-bit DAC, motor-control PWM |
Pangunahing mga Pagkakaiba
- Same-chip replacement path (kumpara saLPC1766FBD100,551)
- High peripheral integration (kumpara saLPC1766FBD100,551)
- Clearer selection against the higher-flash family member (kumpara saLPC1768FBD100K)
Talaan ng Disenyo
Use the manufacturer pin-description table to assign the 100-LQFP footprint and verify every multiplexed peripheral signal. Place decoupling capacitors close to the supply pins, provide adequate ground-plane continuity, and route high-speed clock and communication lines away from analog inputs. Confirm the exposed or non-exposed thermal-pad arrangement, solder mask, and copper recommendations for the exact package drawing.
Plan the power tree around the LPC1766's supply and I/O voltage requirements, including startup current and any Ethernet, USB, or external transceiver loads. Use the manufacturer's recommended supply sequencing and decoupling configuration rather than treating the digital core, analog circuits, and I/O rails as one unrestricted rail. Verify voltage tolerance, ground references, and analog input limits against the datasheet before connecting external modules.
Keep the 100 MHz clock route short and controlled, follow the recommended source and load topology, and provide solid return paths beneath high-speed signals. Ethernet and USB interfaces are sensitive to reference-plane discontinuities and noisy return currents; keep their physical-layer support components close to the controller or transceiver where the application architecture requires it. Perform signal-integrity and EMC checks after the final stack-up is selected.
Do not assume that a similarly named LPC1766 orderable code is electrically and logistically identical. The LPC1766FBD100,551 is documented as the same device in a different packing format, while LPC1768FBD100K increases flash from 256 KB to 512 KB. Confirm the exact suffix, package, memory configuration, startup behavior, and production packing requirements before substitution or redesign.
Impormasyon ng Pagsunod sa Kautusan
Compliance declarations for the exact LPC1766FBD100K orderable part were not identified in the available manufacturer and distributor information. Automotive qualification must not be inferred from the Cortex-M3 core or family name.