NXP Semiconductors

LPC1830FET100 - 180MHz Cortex-M3 MCU with Ethernet | NXP

MPN: LPC1830FET100 ✓ Nakahanda
2.2 V to 3.6 V Vdss TFBGA-100, 9 x 9 mm Package 180 MHz Speed External flash; ROMless Memory
MOQ: 1 |

LPC1830FET100 Ulas

NXP LPC1830FET100 is a 32-bit ARM Cortex-M3 microcontroller operating up to 180 MHz, with 200 kB of SRAM, Ethernet, two high-speed USB interfaces, and CAN 2.0B connectivity in a 100-ball TFBGA package measuring 9 x 9 mm. The ROMless design supports external flash memory and combines a high-performance embedded core with extensive communications peripherals.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory interfaces, communication controllers, timers, and general-purpose I/O. The LPC1830 belongs to the Cortex-M3 > 32-bit microcontroller > embedded processor > semiconductor hierarchy. It is intended for compact embedded systems that need more connectivity and processing capacity than a basic 8-bit or 16-bit control device, while retaining the deterministic real-time characteristics associated with Arm Cortex-M architecture.

The LPC1830FET100 operates at frequencies up to 180 MHz and provides 200 kB of on-chip SRAM. Its communications block includes Ethernet, two high-speed USB 2.0 controllers supporting host, OTG, and device roles, and CAN 2.0B. Additional integrated resources include SPIFI for external serial flash, LCD support, external-memory control, and 83 I/O ports. These interfaces allow one device to supervise sensors, communications equipment, human-machine interfaces, and industrial peripherals without requiring several discrete interface controllers.

The ROMless architecture separates executable code storage from the integrated SRAM. A system designer can therefore select an external SPI flash device according to code size and update requirements, while the MCU provides the central bus and control logic. The high-speed USB and Ethernet blocks are especially useful when the product must connect to a host computer, network infrastructure, service tools, or removable storage. CAN 2.0B support extends the same design capability to industrial and vehicle-oriented embedded networks.

Typical applications include industrial Ethernet gateways, USB-to-Ethernet bridges, service and diagnostic equipment, connected control panels, protocol analyzers, data acquisition systems, and embedded human-machine interfaces. In each case, the combination of 180 MHz processing, 200 kB SRAM, dual USB, Ethernet, and CAN provides a compact platform for real-time control alongside network connectivity.

PCB implementation must account for the dense 100-ball TFBGA footprint and the high-speed signals associated with USB and Ethernet. Place the external flash, decoupling capacitors, clocks, and communication magnetics according to the NXP hardware design guidance, and provide unobstructed thermal paths for exposed-pad heat dissipation where applicable. Confirm the exact pin assignment and multiplexing requirements against the manufacturer datasheet before routing the board.

This product reference combines the LPC1830FET100 architecture and interface data with application-focused guidance, package information, and qualified same-family drop-in alternatives. It is intended to accelerate schematic selection, PCB planning, firmware bring-up, and lifecycle review for engineers designing connected embedded systems around the NXP LPC18xx microcontroller family.

Mga alternatibo na pwedeng ilagay na LPC1830FET100 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok LPC1830FET100 (parehas na form factor at footprint) — pagkakaiba sa Program Memory.

NXP
Program Memory: ROMless; external boot memory required
Ikabit sa LPC1830FET100 →

LPC1850FET100

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TFBGA-100, 9 x 9 mm
Same 180 MHz Cortex-M3 performance and TFBGA-100 footprint; peripheral configuration differs, so Ethernet, USB, CAN, and LCD availability must be verified

📋 Alternatibo na Reference (hindi sa katalogo)

LPC1837FET100

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TFBGA-100, 9 x 9 mm
Same Cortex-M3 family and TFBGA-100 footprint; maximum frequency and selected communications peripherals differ from the LPC1830FET100

📋 Alternatibo na Reference (hindi sa katalogo)

LPC1833FET100

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TFBGA-100, 9 x 9 mm
Same Cortex-M3 family and TFBGA-100 footprint; available memory and peripheral resources are lower or different than the 200 kB LPC1830FET100 configuration

📋 Alternatibo na Reference (hindi sa katalogo)

LPC1832FET100

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TFBGA-100, 9 x 9 mm
Same Cortex-M3 family and TFBGA-100 footprint; lower-memory configuration and revised peripheral mix may require firmware and hardware review

📋 Alternatibo na Reference (hindi sa katalogo)

LPC1830FET100Y

✅ Drop-In
NXP
📦 TFBGA-100, 9 x 9 mm
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 180 MHz · 32 bit · 200 kB · ROMless; external boot memory required · 2.5 V or 3.3 V · 1 Ethernet controller

Magkontak para sa presyo

Tingnan ang Datasheet →

LPC1830FET100 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 180 MHz
Width ng Data Bus 32 bit
On-Chip SRAM 200 kB
Program Memory External flash; ROMless
Ethernet Controller 1 controller
High-Speed USB Controllers 2 controllers
USB Operating Modes Host, OTG, and Device
CAN Support CAN 2.0B
External Serial Flash Interface SPIFI
General-Purpose I/O Ports 83 ports
Supply Voltage Range 2.2 V to 3.6 V
Packhaging TFBGA-100, 9 x 9 mm
Terminal Count 100 balls
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng LPC1830FET100 tfbga-100, 9 x 9 mm

Pin configuration para sa LPC1830FET100 (tfbga-100, 9 x 9 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng tfbga-100, 9 x 9 mm package para sa LPC1830FET100

Wala ng detalyadong pinout data na magagamit para sa LPC1830FET100.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LPC1830FET100 ay nararapat para sa 6 aplikasyons: Industrial Ethernet Gateway, USB-to-Ethernet Communication Bridge, Connected Control Panel, Industrial CAN Gateway, USB Service and Diagnostic Tool, Embedded Data Acquisition System.

🏭

Industrial Ethernet Gateway

The LPC1830FET100 fits an industrial Ethernet gateway because it combines a 180 MHz ARM Cortex-M3 core, 200 kB of SRAM, an Ethernet controller, CAN 2.0B, and two high-speed USB 2.0 controllers in a 9 x 9 mm TFBGA-100 package. It can manage protocol conversion, local buffering, status monitoring, and gateway configuration within one compact controller. An external Ethernet PHY and magnetics complete the physical network interface, while CAN 2.0B supports connection to industrial equipment. Firmware can use the two USB controllers for service access or peripheral connectivity without adding a separate USB controller. The main engineering consideration is verifying PHY, transceiver, clock, and connector implementation against the NXP hardware design guidance.

🌐

USB-to-Ethernet Communication Bridge

The LPC1830FET100 is suitable for a USB-to-Ethernet bridge because it provides two high-speed USB 2.0 controllers alongside Ethernet and a 180 MHz Cortex-M3 processor. One USB interface can communicate with a host computer while the other supports configuration or peripheral connections, and the Ethernet controller handles network traffic. The 200 kB of SRAM supports buffering, protocol management, and real-time packet processing, while SPIFI permits external flash storage for firmware or configuration data. Product implementation still requires an Ethernet PHY, isolation or magnetics, ESD protection, and validated USB signal routing. The 100-ball TFBGA package enables a compact bridge but requires careful high-speed PCB layout.

📺

Connected Control Panel

The LPC1830FET100 can serve as the central processor in a connected control panel that combines a graphical interface, network management, and real-time control. Its 180 MHz Cortex-M3 performance provides capacity for UI updates and protocol handling, while 200 kB of SRAM accommodates display buffers, state data, and communication tasks. Integrated Ethernet, USB, CAN, LCD support, and 83 I/O ports simplify connections to touch controllers, indicators, sensors, and service connectors. External serial flash connected through SPIFI provides nonvolatile firmware storage because the MCU itself is ROMless. Layout planning must keep display, Ethernet, USB, and clock routing away from sensitive analog or high-speed signal paths where possible.

⚡

Industrial CAN Gateway

The LPC1830FET100 is well suited to an industrial CAN gateway because CAN 2.0B is integrated alongside Ethernet, two high-speed USB controllers, and a 180 MHz Cortex-M3 core. The controller can translate between CAN networks and Ethernet or USB management systems while maintaining local protocol state in 200 kB of SRAM. SPIFI allows firmware and configuration data to be retained in external flash without adding internal program ROM. The same device can also manage diagnostics, logging, and remote service interfaces. A robust product still needs a CAN transceiver, protection network, isolated power strategy where required, and precise termination. Firmware and PCB validation should confirm timer, pin-mux, and interrupt behavior for the selected peripheral configuration.

🖥️

USB Service and Diagnostic Tool

The LPC1830FET100 supports compact USB service and diagnostic equipment through its two high-speed USB 2.0 controllers and 180 MHz processing performance. One controller can operate as the host interface for diagnostics while the other provides a device connection to an embedded target or configuration port. Ethernet and CAN 2.0B expand the same platform into a multi-protocol test unit, and the 200 kB SRAM provides space for packet buffers, logs, and protocol state. SPIFI permits external storage of firmware assets or test definitions. The dense 100-ball TFBGA package requires careful escape routing, while USB impedance, ESD protection, cable or connector choice, and firmware host compatibility require focused validation before production release.

🧩

Embedded Data Acquisition System

The LPC1830FET100 can act as the control processor in a data-acquisition system that combines sensor conditioning, local processing, and fast communications. Its 180 MHz ARM Cortex-M3 core can execute acquisition control, filtering, timestamping, and data-transfer tasks, while 200 kB of SRAM supports sample buffering and protocol state. Ethernet and dual high-speed USB interfaces provide efficient paths for transferring captured data to a host or network, and CAN 2.0B can connect the system to industrial sensors or actuators. External flash through SPIFI expands nonvolatile storage capacity. Designers should allocate pins for the required sensor interfaces, keep analog and digital grounds managed, validate timing margins, and follow the manufacturer layout guidance for the TFBGA-100 footprint.

What is the LPC1830FET100?
The LPC1830FET100 is an NXP 32-bit ARM Cortex-M3 microcontroller that operates up to 180 MHz and combines 200 kB of SRAM with Ethernet, two high-speed USB 2.0 controllers, and CAN 2.0B. According to the NXP product information, it is a ROMless device offered in a 100-ball TFBGA package measuring 9 x 9 mm. It is intended for connected embedded products requiring substantial processing and communications capability.
What are the key specifications of LPC1830FET100 that engineers should know?
The LPC1830FET100 provides a 180 MHz ARM Cortex-M3 core, 200 kB of SRAM, Ethernet, two high-speed USB 2.0 controllers, CAN 2.0B, SPIFI, LCD support, and 83 I/O ports. The manufacturer identifies the device as ROMless and packages it in a 9 x 9 mm TFBGA-100. According to the NXP product page, these resources support compact embedded systems combining real-time control with USB, Ethernet, and CAN connectivity.
Where to download the LPC1830FET100 datasheet PDF?
The official LPC1830FET100 datasheet PDF is available through the NXP product page linked on this page as the manufacturer datasheet destination. The LPC1850/30/20/10 family documentation describes the Cortex-M3 architecture, up-to-180 MHz operation, memory system, USB, Ethernet, CAN, and package details. Use that document for authoritative pin descriptions, timing values, electrical limits, and PCB implementation requirements.
Where can I find the LPC1830FET100 pinout and BGA ball map?
The LPC1830FET100 ball map and pin descriptions are located in the manufacturer datasheet for the LPC1850/30/20/10 family. The device uses a 100-ball TFBGA package, so designers should assign every ball from the official pin table rather than relying on a generic BGA drawing. Pin multiplexing for Ethernet, USB, CAN, SPIFI, LCD, clocks, and GPIO must also be checked against the intended board configuration.
How much SRAM and flash memory does LPC1830FET100 have?
The LPC1830FET100 includes 200 kB of on-chip SRAM and has no integrated program ROM. Executable code is stored in external flash connected through the microcontroller's external memory and SPIFI interfaces. According to the NXP product information, the ROMless architecture allows the flash device to be selected according to firmware capacity, update strategy, and board-layout requirements.
Is LPC1830FET100 suitable for industrial Ethernet applications?
The LPC1830FET100 is suitable for industrial Ethernet applications because it combines a 180 MHz Cortex-M3 core with an Ethernet controller, 200 kB of SRAM, CAN 2.0B, and two high-speed USB controllers. Its 9 x 9 mm TFBGA-100 package supports compact board designs. The Ethernet PHY, magnetic interface, isolation requirements, and regulatory constraints still require separate implementation and validation.
Can LPC1830FET100 be used as a USB host, OTG, or device?
The LPC1830FET100 supports high-speed USB 2.0 operation in host, OTG, and device roles through two USB controllers. According to the NXP product information, this allows the MCU to serve as a USB host, appear as a USB peripheral, or negotiate dual-role OTG operation. Interface layout, connector design, ESD protection, and signal-integrity validation must follow the manufacturer hardware guidance.
What can replace LPC1830FET100?
The closest supported replacements are pin-compatible members of the NXP LPC18xx family, including LPC1850FET100, LPC1837FET100, LPC1833FET100, and LPC1832FET100 when their available peripherals meet the design requirements. Each candidate uses the same 100-ball TFBGA footprint, but feature sets and clock limits differ. Compare Ethernet, USB, CAN, SPIFI, LCD, memory, and software requirements before replacing the LPC1830FET100.
Is LPC1830FET100 the same as LPC1850FET100?
The LPC1830FET100 and LPC1850FET100 are pin-compatible members of the NXP LPC18xx family in the 100-ball TFBGA package. The LPC1850FET100 can operate up to 180 MHz, but its internal peripheral mix differs from the LPC1830FET100. A board-level substitution is practical only after checking every enabled Ethernet, USB, CAN, SPIFI, LCD, timer, and GPIO function against the replacement datasheet.
LPC1830FET100 vs LPC1850FET100: which is better for a connected controller?
Choose the LPC1830FET100 when the design depends on its specific combination of Ethernet, dual high-speed USB, CAN 2.0B, 200 kB SRAM, and SPIFI. Choose the LPC1850FET100 when its available peripheral configuration is sufficient and its family feature set better matches the design. Both operate up to 180 MHz and use the same TFBGA-100 footprint, so firmware and peripheral configuration determine the better functional choice.
When should I choose LPC1830FET100 over LPC1837FET100?
Choose the LPC1830FET100 when the product requires the LPC1830 configuration of Ethernet, USB, CAN, LCD, and memory peripherals. Choose the LPC1837FET100 only after confirming that its available interfaces satisfy the design, especially where the LPC1837 lacks or changes functions used by the LPC1830. Both use the same 100-ball TFBGA footprint, but similar packaging does not guarantee identical peripheral availability.
Where to buy LPC1830FET100 online?
Use the Request a Quote form on this page to request LPC1830FET100 availability, commercial terms, and current lead time from XAIPART. The exact device is an NXP ROMless 100-ball TFBGA MCU with a 180 MHz Cortex-M3 core and 200 kB of SRAM. Include the required package, quantity, date code, and production schedule in the request so procurement can confirm the correct configuration.
What is the price of LPC1830FET100?
Use the Request a Quote form on this page for the current LPC1830FET100 price and volume terms. The component's core specification is an NXP 32-bit Cortex-M3 MCU at up to 180 MHz with 200 kB of SRAM in a 100-ball TFBGA package. Quote requests should specify quantity, target date, and packaging requirements because commercial availability can change with market conditions.
What is the lead time for LPC1830FET100?
Request the current LPC1830FET100 lead time through the Request a Quote form on this page. Include the required quantity, shipment destination, production schedule, and acceptable date-code policy when requesting confirmation. NXP lists the LPC1830FET100 as active, but a production quotation is the appropriate way to determine current allocation, stock position, and delivery timing.
Is LPC1830FET100 in stock?
The current LPC1830FET100 stock position should be confirmed through the Request a Quote form on this page. The manufacturer lists the device as active and identifies it as a 180 MHz Cortex-M3 MCU with 200 kB of SRAM in a 100-ball TFBGA package. Include your required quantity and target schedule so the response reflects the exact order configuration.

Impormasyon ng Talumpati sa Engineering for LPC1830FET100 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the LPC1830FET100 when an embedded design needs a 180 MHz Cortex-M3 core, 200 kB of SRAM, Ethernet, two high-speed USB 2.0 controllers, CAN 2.0B, LCD support, SPIFI, and a compact 100-ball TFBGA package. Select LPC1850FET100 when its available peripheral mix satisfies the design and the board can reuse the same footprint. Consider LPC1837FET100, LPC1833FET100, or LPC1832FET100 when their memory and communication resources align with a lower-complexity product. LPC1830FET100Y is the closest same-device candidate when its commercial and ordering attributes meet the project requirements. For every alternative, compare the complete peripheral matrix, pin multiplexing, external flash requirements, clock limits, startup sequence, and package-specific PCB constraints rather than relying only on the shared BGA outline. A footprint-compatible part still requires firmware-level peripheral verification and product-specific qualification.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LPC1850FET100 LPC1837FET100 LPC1833FET100 LPC1832FET100 LPC1830FET100Y
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package TFBGA-100, 9 x 9 mm TFBGA-100, 9 x 9 mm TFBGA-100, 9 x 9 mm TFBGA-100, 9 x 9 mm TFBGA-100, 9 x 9 mm TFBGA-100, 9 x 9 mm
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3

Pangunahing mga Pagkakaiba

  • Higher SRAM capacity within the compatible LPC18xx family (kumpara saLPC1833FET100)
  • Dual high-speed USB connectivity (kumpara saLPC1832FET100)
  • Complete connectivity combination for embedded gateways (kumpara saLPC1850FET100)
  • Pin-compatible upgrade path without changing the BGA footprint (kumpara saLPC1837FET100)

Talaan ng Disenyo

Treat the TFBGA-100 layout as a high-density BGA design. Follow the NXP pin, ball, escape-routing, and via recommendations, maintain the specified pad and solder-mask geometry, and avoid placing tall or mechanically stressed components on the underside unless the package and assembly process allow it. Validate assembly with thermal cycling and focused X-ray inspection because solder-joint defects can create intermittent Ethernet, USB, or clock failures that are difficult to diagnose at board level.

Route USB and Ethernet signals as controlled-impedance interfaces with continuous reference planes and appropriately placed termination, protection, and PHY or transceiver components. Keep switching nodes and high-current supply paths away from USB, Ethernet, and clock inputs. Use the shortest practical connections for SPIFI and memory-bus signals, provide clean decoupling at every supply ball, and follow the manufacturer's clocking and power-sequencing guidance to prevent communication or boot instability.

Because the LPC1830FET100 is ROMless, the board must include external flash and correctly support its voltage, interface timing, and power requirements. Place the required bulk and high-frequency decoupling capacitors close to their assigned power balls, preserve the component placement order recommended by NXP, and account for voltage droop during high-speed USB or Ethernet transmit bursts. Validate the complete power tree at maximum clock frequency and peak communications activity rather than at idle conditions.

Do not treat a shared TFBGA-100 footprint as proof that every peripheral is interchangeable. Before using LPC1850FET100, LPC1837FET100, LPC1833FET100, LPC1832FET100, or LPC1830FET100Y, compare the complete pin and peripheral matrix, especially Ethernet, dual USB, CAN, LCD, SPIFI, timer, interrupt, and pin-mux assignments. Also review startup code and external flash addressing because a ROMless replacement can require device-specific initialization and linker configuration even when the board fits mechanically.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. Confirm product and packaging compliance with the manufacturer before release.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LPC1830FET100 datasheet LPC1830FET100 datasheet pdf LPC1830FET100 pinout LPC1830FET100 specifications NXP LPC1830FET100 LPC1830FET100 TFBGA-100 LPC1830FET100 Ethernet USB CAN LPC1830FET100 equivalent LPC1830FET100 replacement LPC1830FET100 vs LPC1850FET100 LPC1830FET100 price LPC1830FET100 stock LPC1830FET100 application circuit LPC1830FET100 footprint LPC1830FET100 programming

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors LPC1830FET100 LPC1850FET100 LPC1837FET100 LPC1833FET100 LPC1832FET100 LPC1830FET100Y ARM Cortex-M3 32-bit microcontroller embedded microcontroller embedded processor semiconductor 200 kB SRAM ROMless architecture SPIFI Ethernet controller High-speed USB 2.0 CAN 2.0B TFBGA-100 BGA package surface mount external flash memory LCD controller industrial Ethernet gateway USB-to-Ethernet bridge
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ