Analog Devices

LT1468IS8 - 90MHz Precision High-Speed Op Amp | ADI

MPN: LT1468IS8 ✓ Nakahanda
8-pin SO package Package
MOQ: 1 |

LT1468IS8 Ulas

The Analog Devices LT1468IS8 is a single-channel, precision high-speed operational amplifier with a 90 MHz gain-bandwidth product, 22 V/us slew rate, and 16-bit accuracy. The device settles to within 150 uV of a 10 V output signal in 900 ns and is supplied in an 8-pin SO package.

An operational amplifier is an analog signal-processing IC that uses high-gain differential feedback to amplify, buffer, filter, or convert signals. The LT1468 belongs to the precision operational-amplifier hierarchy, combining low DC error with wideband AC performance. This combination makes it useful when a system requires both accurate signal scaling and rapid settling, rather than choosing between slow precision and high speed.

The principal performance specifications are a 90 MHz gain-bandwidth product, 22 V/us slew rate, 900 ns settling time to 150 uV for a 10 V signal, and 16-bit accuracy. These figures are particularly relevant for data-acquisition and signal-conversion circuits. The high slew rate supports large output transitions quickly, while the short settling time helps preserve channel-to-channel accuracy after a digital-to-analog converter changes its output.

The LT1468 is particularly suited to precision signal chains where amplifier behavior affects overall conversion accuracy. Its 16-bit operating accuracy and fast settling complement current-to-voltage conversion around a DAC and the acquisition of high-resolution ADC outputs. Unlike a general-purpose amplifier optimized primarily for low-cost signal conditioning, the LT1468 targets applications where DC precision and high-frequency response both influence the result.

Typical applications include DAC current-to-voltage conversion, ADC input buffering, precision instrumentation, laboratory test equipment, active filters, and high-speed control or signal-conditioning circuits. In a DAC output path, the amplifier helps convert a switched or current-based converter output into a usable voltage. In an ADC front end, it can reduce loading while preserving the required bandwidth.

Designers should use the manufacturer’s recommended compensation values and verify closed-loop stability for the selected gain, output load, and cable capacitance. High-speed precision amplifiers can amplify stray capacitance, input-bias-current error, and PCB leakage into output offset or settling errors. Keep feedback loops short, use solid grounding, and place compensation and decoupling components close to the device pins.

This product record combines the manufacturer’s operating characteristics, verified orderable-part information, drop-in family alternatives, package details, and application-specific design guidance. It is intended to help engineers identify the correct temperature grade, compensation variant, PCB footprint, and signal-chain role before releasing a production BOM.

Mga alternatibo na pwedeng ilagay na LT1468IS8 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

LT1468CS8

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SO
Same 90 MHz gain-bandwidth product and 22 V/us slew-rate family ratings; commercial temperature grade is 0C to 70C versus -40C to 85C for LT1468IS8.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1468ES8

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SO
Same 90 MHz gain-bandwidth product and 22 V/us slew-rate family ratings; extended temperature grade is -40C to 125C versus -40C to 85C for LT1468IS8.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1468-2IS8

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SO
Same 90 MHz class and 22 V/us slew-rate family ratings, but decompensated for stable gain of 2 or higher rather than unity-gain-stable operation.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1468-2CS8

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SO
Same 90 MHz class and 22 V/us slew-rate family ratings, with 0C to 70C commercial grade and decompensation for gain of 2 or higher.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1468-2ES8

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-pin SO
Same 90 MHz class and 22 V/us slew-rate family ratings, with -40C to 125C extended temperature grade and gain-of-2-or-higher decompensation.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1468IS8 Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Precision high-speed operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 90 MHz
Slew Rate 22 V/us
Accuracy 16-bit
Settling Time 900 ns to 150 uV for a 10 V signal
Packhaging 8-pin SO package
Uri ng Pagpapasok Surface mount
Tindminan RoHS Compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL 1 (unlimited floor life)

Gabay sa Pin Configuration ng LT1468IS8 8-pin so package

Pin configuration para sa LT1468IS8 (8-pin so package package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin so package package para sa LT1468IS8

Wala ng detalyadong pinout data na magagamit para sa LT1468IS8.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

LT1468IS8 ay nararapat para sa 6 aplikasyons: DAC Current-to-Voltage Conversion, High-Resolution ADC Input Buffer, Precision Instrumentation Signal Conditioning, Active Filtering and Signal Shaping, Laboratory and Test Equipment, Precision Control and Feedback Loops.

📺

DAC Current-to-Voltage Conversion

The LT1468IS8 fits precision DAC output stages because its 22 V/us slew rate supports rapid output transitions while its 16-bit accuracy and 900 ns settling to 150 uV help preserve converter-level linearity. It can be placed in the transimpedance feedback path of a current-output DAC, where the feedback resistor establishes the conversion gain. The 90 MHz gain-bandwidth product provides bandwidth beyond the settling requirement, although the selected resistor values must preserve stability and output swing. PCB layout is especially important: keep the feedback loop compact, minimize parasitic capacitance at the summing node, and provide a low-impedance return path so switching or high-speed settling does not add error to the converted voltage.

🖥️

High-Resolution ADC Input Buffer

The LT1468IS8 can buffer a high-resolution ADC input where both bandwidth and settling accuracy matter. Its 90 MHz gain-bandwidth product is well matched to fast acquisition systems, while the specified 900 ns settling to 150 uV for a 10 V signal supports the manufacturer’s 16-bit-accuracy positioning. The amplifier helps isolate the ADC input from source impedance and reduce loading-induced errors. Designers should account for input bias current, common-mode range, capacitive loading, and the ADC’s acquisition window. Keep the amplifier close to the ADC, provide a clean ground reference, and test settling with the actual sampling rate and switch-capacitor input rather than relying only on small-signal bandwidth.

🏭

Precision Instrumentation Signal Conditioning

The LT1468IS8 suits instrumentation front ends that must preserve small signals while supporting wider-bandwidth measurement paths. Its 16-bit accuracy reduces the error budget relative to a generic high-speed amplifier, and its 90 MHz gain-bandwidth product prevents the amplifier itself from becoming the dominant bandwidth limitation. It can be used for gain, impedance buffering, active filtering, or signal conversion around sensors and laboratory instruments. The 22 V/us slew rate improves large-signal behavior, but input offset, bias current, noise, and common-mode limitations must still be considered. Use a stable reference-ground architecture and evaluate temperature drift across the complete instrument operating range.

🌐

Active Filtering and Signal Shaping

The LT1468IS8 is useful in active filter and signal-shaping stages where precision and high-speed response must coexist. Its 90 MHz gain-bandwidth product provides design margin beyond the signal bandwidth, while its 16-bit accuracy helps minimize degradation introduced by the amplifier stage. The device can implement low-pass, high-pass, or band-pass networks when the component tolerances and closed-loop stability requirements are respected. Its 22 V/us slew rate also supports filters processing larger amplitude signals without the same slew limitation as a slower precision amplifier. Keep the feedback components close together, maintain short ground returns, and verify capacitor tolerances because high closed-loop gain and high frequency can magnify component and parasitic differences.

🔧

Laboratory and Test Equipment

The LT1468IS8 supports laboratory and automated test equipment that combines low-level measurement accuracy with fast waveform or control-loop response. Its 900 ns settling characteristic can reduce delay after a signal change, while 16-bit accuracy supports precision source, sink, or measurement functions. The 90 MHz bandwidth and 22 V/us slew rate make the amplifier appropriate for high-speed analog test paths that must retain DC precision. Layout should separate sensitive input returns from output and clock-related currents, and the amplifier should be mounted close to its feedback network. Before production release, verify output swing, load drive, temperature behavior, and settling under the actual probe, cable, and fixture loading.

⚡

Precision Control and Feedback Loops

The LT1468IS8 can serve as the amplifier in a precision control or feedback path where delay directly affects loop performance. Its 90 MHz gain-bandwidth product, 22 V/us slew rate, and 900 ns settling behavior provide a useful combination of dynamic response and DC accuracy. The device is suitable for servo amplifiers, programmable test systems, and analog feedback networks where the loop must respond quickly without sacrificing long-term precision. Compensation must be based on the complete loop rather than the open-loop amplifier alone. Account for output saturation, load capacitance, and phase margin, and use a ground plane that does not introduce return-path discontinuities between the feedback network and controlled circuit.

Buod ng mga Inirekomendang Produkto

LT1468IS8#PBF Lead-free ordering option of the same LT1468 amplifier family Ginagamit sa: DAC Current-to-Voltage Conversion, High-Resolution ADC Input Buffer, Active Filtering and Signal Shaping LT1468-2IS8 Family option for transimpedance stages using closed-loop gain of 2 or higher Ginagamit sa: DAC Current-to-Voltage Conversion, Active Filtering and Signal Shaping, Laboratory and Test Equipment LT1468CS8 Same-family commercial-temperature buffer option Ginagamit sa: High-Resolution ADC Input Buffer, Precision Instrumentation Signal Conditioning, Precision Control and Feedback Loops LT1468ES8 Same-family extended-temperature option for wider environments Ginagamit sa: Precision Instrumentation Signal Conditioning, Laboratory and Test Equipment, Precision Control and Feedback Loops
What is the LT1468IS8?
The LT1468IS8 is a single-channel, precision high-speed operational amplifier in an 8-pin SO package. According to the Analog Devices manufacturer datasheet, it combines a 90 MHz gain-bandwidth product, 22 V/us slew rate, 16-bit accuracy, and 900 ns settling to 150 uV for a 10 V signal. It is intended for precision signal chains where accuracy and fast settling are both important.
What are the key specifications of LT1468IS8 that engineers should know?
The LT1468IS8 provides a 90 MHz gain-bandwidth product, 22 V/us slew rate, and 16-bit operating accuracy. The Analog Devices manufacturer datasheet also specifies settling to within 150 uV of a 10 V signal in 900 ns. These figures make the device appropriate for DAC current-to-voltage conversion, ADC buffering, active filtering, instrumentation, and other wideband precision applications.
What can replace LT1468IS8?
The closest verified replacements are pin-compatible members of the Analog Devices LT1468 family in the same 8-pin SO package. LT1468CS8 and LT1468ES8 provide different temperature grades, while LT1468-2IS8, LT1468-2CS8, and LT1468-2ES8 use decompensated compensation for stable operation at gain of 2 or higher. Confirm the required temperature range, closed-loop gain, and system stability before substitution.
Is LT1468IS8 suitable for ADC buffering?
Yes, the LT1468IS8 is suitable for ADC input buffering when the ADC requires high bandwidth, low distortion, and accurate signal capture. Its 90 MHz gain-bandwidth product and 22 V/us slew rate support fast input transitions, while its 16-bit accuracy and 900 ns settling behavior are consistent with the manufacturer’s positioning for ADC buffers. Validate capacitive loading and settling at the actual sampling rate.
Where can I download the LT1468IS8 datasheet PDF?
The official Analog Devices LT1468 datasheet PDF is available at https://www.analog.com/media/en/technical-documentation/data-sheets/1468fb.pdf. It is the primary document for electrical characteristics, compensation recommendations, package drawings, and application guidance. Use the LT1468 family document for the LT1468IS8 ordering code, and consult the manufacturer product page for lifecycle and ordering information.
Where can I find the LT1468IS8 pinout?
The LT1468IS8 pinout and package drawing are shown in the pin-configuration section of the official Analog Devices LT1468 manufacturer datasheet. The device uses an 8-pin SO package. Assign PCB nets directly from the published pin-description and package-drawing tables rather than relying on the generic 8-pin illustration, because exposed or orientation details must follow the exact manufacturer drawing.
What is the difference between LT1468IS8 and LT1468-2IS8?
The LT1468IS8 is the unity-gain-stable family version, while the LT1468-2IS8 is decompensated for stable operation at a closed-loop gain of 2 or higher. Both use the same 8-pin SO package and preserve the family’s 90 MHz class of performance, but their compensation and preferred gain differ. Use LT1468-2IS8 when minimum stable gain is acceptable and LT1468IS8 when unity-gain feedback is required.
When should I choose LT1468IS8 over LT1468-2IS8?
Choose LT1468IS8 when the feedback topology operates at unity gain or requires the standard compensation of the LT1468 family. Choose LT1468-2IS8 when the circuit runs at gain of 2 or higher and can exploit decompensated operation. Both are pin-compatible 8-pin SO devices, but changing compensation without checking stability, bandwidth, output swing, and transient response can alter circuit behavior.
What is the best Analog Devices equivalent for LT1468IS8?
The best Analog Devices equivalent depends on the design constraint rather than a single universal part. LT1468CS8 or LT1468ES8 preserves the standard-compensation family architecture with a different temperature grade, while LT1468-2IS8 is appropriate when gain-of-2-or-higher decompensated operation is acceptable. For a cross-brand equivalent, no directly pin-compatible candidate is confirmed; request a cross-reference review through the Request a Quote form.
Is LT1468IS8 the same as LT1468IS8#PBF?
The LT1468IS8 and LT1468IS8#PBF listings refer to closely related orderable forms of the LT1468 family in an 8-pin SO package, with the #PBF designation identifying the lead-free finish. Engineers should still reconcile the exact ordering code, package marking, temperature grade, and approved supplier BOM entry before substitution. The manufacturer datasheet and product page identify the family-level electrical characteristics.
Where to buy LT1468IS8 online?
Use the Request a Quote form on this page to request LT1468IS8 availability, current commercial terms, and an exact-match production BOM proposal. The form is also the appropriate channel for checking lead time, minimum order quantity, and authorized supply without relying on a transient marketplace listing. The part is listed in an 8-pin SO package and should be requested by the complete LT1468IS8 ordering code.
What is the price of LT1468IS8?
Current pricing for LT1468IS8 is obtained through the Request a Quote form on this page because commercial terms can change with quantity, lifecycle status, and supply conditions. Submit the required quantity, target package form, and production schedule with the request. The listing should identify the quote as applying specifically to LT1468IS8 rather than to the #PBF or tape-and-reel ordering codes.
What is the lead time for LT1468IS8 and is it in stock?
Lead time and current inventory for LT1468IS8 should be confirmed through the Request a Quote form on this page. Include the required quantity, shipment date, and whether the 8-pin SO package is being specified as a tube, cut tape, or tape-and-reel reel. The manufacturer product page and authorized supply channels can be used to validate any resulting commercial commitment.
How much power does LT1468IS8 dissipate?
Power dissipation in LT1468IS8 depends on supply voltage, output swing, quiescent current, load current, and ambient temperature, so no fixed dissipation value should be assigned without operating conditions. Use the quiescent current and output-current specifications from the manufacturer datasheet, then calculate approximate device dissipation from actual supply and output voltages. Confirm the result against the package thermal information.
What compliance and environmental information applies to LT1468IS8?
The LT1468 family listing identifies RoHS compliance, REACH unaffected status, and MSL 1 unlimited floor life. The target ordering code is not explicitly identified as AEC-Q100 qualified, lead-free, halogen-free, or conflict-minerals compliant, so those individual attributes remain unknown. Use the manufacturer’s material or product-compliance records for formal certification and do not infer automotive qualification from the industrial-style ordering code.

Impormasyon ng Talumpati sa Engineering for LT1468IS8 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose LT1468IS8 for precision, wideband signal chains that require unity-gain-stable feedback and operation from -40C to 85C. Its 90 MHz gain-bandwidth product, 22 V/us slew rate, and 900 ns settling to 150 uV make it appropriate for DAC current-to-voltage conversion, ADC buffering, active filters, instrumentation, and precision control loops. Choose LT1468CS8 when a 0C-to-70C commercial grade is sufficient, or LT1468ES8 when extended operation to 125C is required. Choose LT1468-2IS8, LT1468-2CS8, or LT1468-2ES8 only when the circuit operates at gain of 2 or higher and decompensated compensation is acceptable. All listed alternatives use the same 8-pin SO package, but package match alone does not resolve compensation or temperature-grade differences.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LT1468CS8 LT1468ES8 LT1468-2IS8 LT1468-2CS8 LT1468-2ES8
Package 8-pin SO 8-pin SO 8-pin SO 8-pin SO 8-pin SO 8-pin SO
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Function Precision high-speed operational amplifier Precision high-speed operational amplifier Precision high-speed operational amplifier Decompensated precision high-speed operational amplifier Decompensated precision high-speed operational amplifier Decompensated precision high-speed operational amplifier
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Gain-Bandwidth Product 90 MHz 90 MHz 90 MHz 90 MHz 90 MHz 90 MHz
Slew Rate 22 V/us 22 V/us 22 V/us 22 V/us 22 V/us 22 V/us
Accuracy 16-bit 16-bit 16-bit 16-bit 16-bit 16-bit
Compensation Unity-gain stable Unity-gain stable Unity-gain stable Stable at gain of 2 or higher Stable at gain of 2 or higher Stable at gain of 2 or higher
Operating Temperature Range -40C to 85C 0C to 70C -40C to 125C -40C to 85C 0C to 70C -40C to 125C

Pangunahing mga Pagkakaiba

  • Standard unity-gain-stable compensation (kumpara saLT1468-2IS8)
  • Industrial temperature coverage (kumpara saLT1468CS8)
  • Fast large-signal response with precision accuracy (kumpara saLT1468ES8)

Talaan ng Disenyo

Place the feedback components and input/output decoupling directly beside their associated SO-8 pins. Keep the high-speed feedback loop compact and route the return current through an uninterrupted ground plane. The LT1468 family combines 90 MHz bandwidth with precision performance, so parasitic inductance and capacitance around the amplifier can affect settling even when the schematic calculations are correct.

Do not substitute a decompensated LT1468-2 member into a unity-gain feedback circuit without checking stability. The LT1468IS8 is the standard-compensation family member, whereas LT1468-2 versions target closed-loop gain of 2 or higher. Verify minimum stable gain, output swing, phase margin, and transient response against the manufacturer application guidance before changing the ordering code.

Evaluate settling with the real source impedance, ADC or DAC sampling network, output load, and cable capacitance. The specified 900 ns settling to 150 uV applies to a defined 10 V signal condition and does not guarantee the same result under every load. Use short traces, minimize connector capacitance, and validate the complete acquisition or conversion channel with the production source and load hardware.

Calculate dissipation from the actual supply voltage, quiescent current, output swing, and load current rather than using supply voltage alone. Provide local supply bypassing and a low-resistance ground return so output-current transients do not modulate the input reference. Confirm that the package temperature rise and output swing remain acceptable at the maximum ambient temperature and enclosure temperature.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The LT1468 family listing identifies RoHS compliance, REACH unaffected status, and MSL 1 unlimited floor life. The exact LT1468IS8 ordering code was not explicitly identified as AEC-Q100 qualified, lead-free, halogen-free, or conflict-minerals compliant.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

lt1468is8 pbf LT1468IS8 datasheet LT1468IS8 datasheet pdf LT1468IS8 pinout LT1468IS8 equivalent LT1468IS8 replacement LT1468IS8 cross reference LT1468IS8 vs LT1468-2IS8 LT1468IS8 footprint LT1468IS8 ADC buffer LT1468IS8 DAC converter LT1468IS8 price LT1468IS8 stock Analog Devices LT1468IS8

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices LT1468IS8 LT1468CS8 LT1468ES8 LT1468-2IS8 LT1468-2CS8 LT1468-2ES8 LT1468IS8#PBF precision operational amplifier high-speed operational amplifier amplifier IC analog semiconductor gain-bandwidth product slew rate settling time input offset voltage input bias current unity-gain stable decompensated amplifier DAC current-to-voltage conversion ADC buffering active filtering 8-pin SO package RoHS REACH MSL 1
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ