LT1468IS8 - 90MHz Precision High-Speed Op Amp | ADI
MPN: LT1468IS8 ✓ فعالLT1468IS8 نمای کلی
An operational amplifier is an analog signal-processing IC that uses high-gain differential feedback to amplify, buffer, filter, or convert signals. The LT1468 belongs to the precision operational-amplifier hierarchy, combining low DC error with wideband AC performance. This combination makes it useful when a system requires both accurate signal scaling and rapid settling, rather than choosing between slow precision and high speed.
The principal performance specifications are a 90 MHz gain-bandwidth product, 22 V/us slew rate, 900 ns settling time to 150 uV for a 10 V signal, and 16-bit accuracy. These figures are particularly relevant for data-acquisition and signal-conversion circuits. The high slew rate supports large output transitions quickly, while the short settling time helps preserve channel-to-channel accuracy after a digital-to-analog converter changes its output.
The LT1468 is particularly suited to precision signal chains where amplifier behavior affects overall conversion accuracy. Its 16-bit operating accuracy and fast settling complement current-to-voltage conversion around a DAC and the acquisition of high-resolution ADC outputs. Unlike a general-purpose amplifier optimized primarily for low-cost signal conditioning, the LT1468 targets applications where DC precision and high-frequency response both influence the result.
Typical applications include DAC current-to-voltage conversion, ADC input buffering, precision instrumentation, laboratory test equipment, active filters, and high-speed control or signal-conditioning circuits. In a DAC output path, the amplifier helps convert a switched or current-based converter output into a usable voltage. In an ADC front end, it can reduce loading while preserving the required bandwidth.
Designers should use the manufacturer’s recommended compensation values and verify closed-loop stability for the selected gain, output load, and cable capacitance. High-speed precision amplifiers can amplify stray capacitance, input-bias-current error, and PCB leakage into output offset or settling errors. Keep feedback loops short, use solid grounding, and place compensation and decoupling components close to the device pins.
This product record combines the manufacturer’s operating characteristics, verified orderable-part information, drop-in family alternatives, package details, and application-specific design guidance. It is intended to help engineers identify the correct temperature grade, compensation variant, PCB footprint, and signal-chain role before releasing a production BOM.
جایگزینهای drop-in برای LT1468IS8 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
LT1468CS8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1468ES8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1468-2IS8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1468-2CS8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1468-2ES8
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
LT1468IS8 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | Precision high-speed operational amplifier |
| Number of Channels | 1 channel |
| Gain-Bandwidth Product | 90 MHz |
| Slew Rate | 22 V/us |
| Accuracy | 16-bit |
| Settling Time | 900 ns to 150 uV for a 10 V signal |
| بستهبندی | 8-pin SO package |
| نوع نصب | Surface mount |
| وضعیت RoHS | Compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited floor life) |
راهنمای پیکربندی پین LT1468IS8 8-pin so package
پیکربندی پین برای LT1468IS8 (پکیج 8-pin so package). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای LT1468IS8.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
LT1468IS8 مناسب است برای 6 کاربردs: DAC Current-to-Voltage Conversion, High-Resolution ADC Input Buffer, Precision Instrumentation Signal Conditioning, Active Filtering and Signal Shaping, Laboratory and Test Equipment, Precision Control and Feedback Loops.
DAC Current-to-Voltage Conversion
The LT1468IS8 fits precision DAC output stages because its 22 V/us slew rate supports rapid output transitions while its 16-bit accuracy and 900 ns settling to 150 uV help preserve converter-level linearity. It can be placed in the transimpedance feedback path of a current-output DAC, where the feedback resistor establishes the conversion gain. The 90 MHz gain-bandwidth product provides bandwidth beyond the settling requirement, although the selected resistor values must preserve stability and output swing. PCB layout is especially important: keep the feedback loop compact, minimize parasitic capacitance at the summing node, and provide a low-impedance return path so switching or high-speed settling does not add error to the converted voltage.
پیشنهادی
High-Resolution ADC Input Buffer
The LT1468IS8 can buffer a high-resolution ADC input where both bandwidth and settling accuracy matter. Its 90 MHz gain-bandwidth product is well matched to fast acquisition systems, while the specified 900 ns settling to 150 uV for a 10 V signal supports the manufacturer’s 16-bit-accuracy positioning. The amplifier helps isolate the ADC input from source impedance and reduce loading-induced errors. Designers should account for input bias current, common-mode range, capacitive loading, and the ADC’s acquisition window. Keep the amplifier close to the ADC, provide a clean ground reference, and test settling with the actual sampling rate and switch-capacitor input rather than relying only on small-signal bandwidth.
پیشنهادی
Precision Instrumentation Signal Conditioning
The LT1468IS8 suits instrumentation front ends that must preserve small signals while supporting wider-bandwidth measurement paths. Its 16-bit accuracy reduces the error budget relative to a generic high-speed amplifier, and its 90 MHz gain-bandwidth product prevents the amplifier itself from becoming the dominant bandwidth limitation. It can be used for gain, impedance buffering, active filtering, or signal conversion around sensors and laboratory instruments. The 22 V/us slew rate improves large-signal behavior, but input offset, bias current, noise, and common-mode limitations must still be considered. Use a stable reference-ground architecture and evaluate temperature drift across the complete instrument operating range.
پیشنهادی
Active Filtering and Signal Shaping
The LT1468IS8 is useful in active filter and signal-shaping stages where precision and high-speed response must coexist. Its 90 MHz gain-bandwidth product provides design margin beyond the signal bandwidth, while its 16-bit accuracy helps minimize degradation introduced by the amplifier stage. The device can implement low-pass, high-pass, or band-pass networks when the component tolerances and closed-loop stability requirements are respected. Its 22 V/us slew rate also supports filters processing larger amplitude signals without the same slew limitation as a slower precision amplifier. Keep the feedback components close together, maintain short ground returns, and verify capacitor tolerances because high closed-loop gain and high frequency can magnify component and parasitic differences.
پیشنهادی
Laboratory and Test Equipment
The LT1468IS8 supports laboratory and automated test equipment that combines low-level measurement accuracy with fast waveform or control-loop response. Its 900 ns settling characteristic can reduce delay after a signal change, while 16-bit accuracy supports precision source, sink, or measurement functions. The 90 MHz bandwidth and 22 V/us slew rate make the amplifier appropriate for high-speed analog test paths that must retain DC precision. Layout should separate sensitive input returns from output and clock-related currents, and the amplifier should be mounted close to its feedback network. Before production release, verify output swing, load drive, temperature behavior, and settling under the actual probe, cable, and fixture loading.
پیشنهادی
Precision Control and Feedback Loops
The LT1468IS8 can serve as the amplifier in a precision control or feedback path where delay directly affects loop performance. Its 90 MHz gain-bandwidth product, 22 V/us slew rate, and 900 ns settling behavior provide a useful combination of dynamic response and DC accuracy. The device is suitable for servo amplifiers, programmable test systems, and analog feedback networks where the loop must respond quickly without sacrificing long-term precision. Compensation must be based on the complete loop rather than the open-loop amplifier alone. Account for output saturation, load capacitance, and phase margin, and use a ground plane that does not introduce return-path discontinuities between the feedback network and controlled circuit.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LT1468IS8 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LT1468CS8 | LT1468ES8 | LT1468-2IS8 | LT1468-2CS8 | LT1468-2ES8 |
|---|---|---|---|---|---|---|
| Package | 8-pin SO | 8-pin SO | 8-pin SO | 8-pin SO | 8-pin SO | 8-pin SO |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Function | Precision high-speed operational amplifier | Precision high-speed operational amplifier | Precision high-speed operational amplifier | Decompensated precision high-speed operational amplifier | Decompensated precision high-speed operational amplifier | Decompensated precision high-speed operational amplifier |
| Number of Channels | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel | 1 channel |
| Gain-Bandwidth Product | 90 MHz | 90 MHz | 90 MHz | 90 MHz | 90 MHz | 90 MHz |
| Slew Rate | 22 V/us | 22 V/us | 22 V/us | 22 V/us | 22 V/us | 22 V/us |
| Accuracy | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit | 16-bit |
| Compensation | Unity-gain stable | Unity-gain stable | Unity-gain stable | Stable at gain of 2 or higher | Stable at gain of 2 or higher | Stable at gain of 2 or higher |
| Operating Temperature Range | -40C to 85C | 0C to 70C | -40C to 125C | -40C to 85C | 0C to 70C | -40C to 125C |
تفاوتهای کلیدی
- Standard unity-gain-stable compensation (در مقابلLT1468-2IS8)
- Industrial temperature coverage (در مقابلLT1468CS8)
- Fast large-signal response with precision accuracy (در مقابلLT1468ES8)
یادداشتهای طراحی
Place the feedback components and input/output decoupling directly beside their associated SO-8 pins. Keep the high-speed feedback loop compact and route the return current through an uninterrupted ground plane. The LT1468 family combines 90 MHz bandwidth with precision performance, so parasitic inductance and capacitance around the amplifier can affect settling even when the schematic calculations are correct.
Do not substitute a decompensated LT1468-2 member into a unity-gain feedback circuit without checking stability. The LT1468IS8 is the standard-compensation family member, whereas LT1468-2 versions target closed-loop gain of 2 or higher. Verify minimum stable gain, output swing, phase margin, and transient response against the manufacturer application guidance before changing the ordering code.
Evaluate settling with the real source impedance, ADC or DAC sampling network, output load, and cable capacitance. The specified 900 ns settling to 150 uV applies to a defined 10 V signal condition and does not guarantee the same result under every load. Use short traces, minimize connector capacitance, and validate the complete acquisition or conversion channel with the production source and load hardware.
Calculate dissipation from the actual supply voltage, quiescent current, output swing, and load current rather than using supply voltage alone. Provide local supply bypassing and a low-resistance ground return so output-current transients do not modulate the input reference. Confirm that the package temperature rise and output swing remain acceptable at the maximum ambient temperature and enclosure temperature.
اطلاعات انطباق
The LT1468 family listing identifies RoHS compliance, REACH unaffected status, and MSL 1 unlimited floor life. The exact LT1468IS8 ordering code was not explicitly identified as AEC-Q100 qualified, lead-free, halogen-free, or conflict-minerals compliant.