Analog Devices

LT1469IN8 - Dual 90MHz Precision Op Amp | Analog Devices

MPN: LT1469IN8 ✓ Nakahanda
8-pin PDIP, 0.300-inch lead spacing Package
MOQ: 1 |

LT1469IN8 Ulas

Analog Devices LT1469IN8 is a dual precision operational amplifier with 90 MHz gain-bandwidth product, 22 V/µs slew rate, and 16-bit accuracy in an 8-pin PDIP package. It combines 900 ns settling to 150 µV for 10 V steps with precision performance suited to high-accuracy signal chains, including DAC current-to-voltage conversion and ADC input buffering.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs while providing high input impedance, low output impedance, and controlled gain through external feedback. Within the amplifier hierarchy, the LT1469IN8 belongs to the voltage-feedback operational-amplifier family and combines precision, high-speed, and low-noise characteristics in one dual-channel device.

The LT1469 family provides two independent amplifiers, a 90 MHz gain-bandwidth product, a 22 V/µs slew rate, and input offset voltage suitable for precision applications. According to the Analog Devices LT1469 product information and datasheet, the device settles to within 150 µV in 900 ns after a 10 V step. Its initial offset-voltage accuracy and drift characteristics make it useful when static error must remain small while signals change quickly.

The LT1469 combines a precision input stage with high-bandwidth AC performance. Its operating characteristics suit closed-loop signal conditioning above the audio range, provided the feedback network, load, and output-swing requirements are evaluated for the selected gain. Because the standard LT1469 is optimized for a minimum stable gain of five, applications requiring unity-gain or gain-of-two stability should examine the LT1469-2 variant.

Typical uses include ADC signal buffers, DAC current-to-voltage converters, precision instrumentation, active filters, and high-speed test equipment. The dual configuration saves board area when two amplified channels are required. In data-conversion systems, its fast settling behavior can shorten the interval before a converter samples the amplified signal, while low DC offset helps preserve code-level accuracy.

PCB design should use short feedback paths, a solid ground plane, and careful routing around high-impedance input nodes. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be tied to a defined potential rather than left floating. The package is a through-hole 8-pin PDIP, allowing conventional plated-through-hole layouts and straightforward prototype assembly.

This product page organizes the manufacturer specifications, drop-in family alternatives, package details, application guidance, and design considerations into one engineering reference. It also highlights the distinction between the standard LT1469 and the decompensated LT1469-2, which is important when stable operation at a lower closed-loop gain is required.

Mga alternatibo na pwedeng ilagay na LT1469IN8 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

LT1469IN8#PBF

✅ Drop-In
📦 8-PDIP
Same LT1469 electrical configuration and 8-PDIP footprint; the #PBF suffix identifies the lead-free ordering option.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1469CN8#PBF

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-PDIP
Same 90 MHz bandwidth, 22 V/µs slew rate, and 8-PDIP footprint; the C suffix denotes a different temperature grade from IN8.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1469-2CN8#PBF

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-PDIP
Same 90 MHz bandwidth, 22 V/µs slew rate, and 8-PDIP footprint; decompensation changes minimum stable gain from 5 to 2.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1469-2IN8#PBF

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-PDIP
Same 90 MHz bandwidth, 22 V/µs slew rate, and 8-PDIP footprint; decompensation changes minimum stable gain from 5 to 2.

📋 Alternatibo na Reference (hindi sa katalogo)

LT1469IN8 Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Dual precision operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 90 MHz
Slew Rate 22 V/µs
Settling Time 900 ns to 150 µV for a 10 V step
Accuracy 16-bit
Minimum Stable Gain 5 for the standard LT1469
Packhaging 8-pin PDIP, 0.300-inch lead spacing
Uri ng Pagpapasok Through-hole

Pin Configuration ng LT1469IN8

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OUT A — Output of amplifier A
Pin 2 -IN A — Inverting input of amplifier A
Pin 3 +IN A — Non-inverting input of amplifier A
Pin 4 V- — Negative supply connection
Pin 5 +IN B — Non-inverting input of amplifier B
Pin 6 -IN B — Inverting input of amplifier B
Pin 7 OUT B — Output of amplifier B
Pin 8 V+ — Positive supply connection

Tipikal na mga Gamit

LT1469IN8 ay nararapat para sa 6 aplikasyons: ADC Input Buffer, DAC Current-to-Voltage Conversion, Precision Instrumentation Signal Conditioning, High-Speed Active Filtering, Precision Test and Measurement, Precision Data Acquisition.

📊

ADC Input Buffer

The LT1469IN8 fits precision ADC front ends that require accurate signal amplification before conversion. Its 90 MHz gain-bandwidth product and 22 V/µs slew rate allow both the DC accuracy and large-signal behavior needed to preserve converter code integrity. A useful implementation places the amplifier directly at the ADC input so the 10 V step settling specification can reduce the interval before sampling. Because the standard LT1469 is optimized for closed-loop gain of five or higher, use the LT1469-2 when the required gain is two. The tradeoff is increased power dissipation and potentially poorer settling performance when operating below the minimum stable gain.

🎛️

DAC Current-to-Voltage Conversion

The LT1469IN8 can convert the differential output current of a current-output DAC into a useful voltage. Its 16-bit accuracy class, low-offset focus, 22 V/µs slew rate, and 900 ns settling to 150 µV for a 10 V step help preserve both static and dynamic DAC resolution. The usual circuit uses the dual amplifier channels for differential conversion or for an instrumentation-style output stage. Feedback resistor matching and the DAC's compliance voltage determine the achievable output range, so those values must be calculated separately. Compared with a general-purpose amplifier, the LT1469 family is specifically positioned for high-accuracy conversion applications.

🔬

Precision Instrumentation Signal Conditioning

Instrumentation systems benefit from the LT1469IN8 when sensor signals require low-offset amplification without sacrificing response time. The 90 MHz gain-bandwidth product supports closed-loop gains of five or higher, while 16-bit accuracy and fast settling make the device appropriate for laboratory measurement chains. Two channels can handle complementary sensor outputs or sequential measurement paths in a compact 8-pin PDIP footprint. The design must account for sensor impedance, resistor network noise, input common-mode limits, and output loading. At high closed-loop gain, the amplifier bandwidth remains above the signal bandwidth, but resistor tolerances and parasitic capacitance may dominate practical accuracy.

📡

High-Speed Active Filtering

The LT1469IN8 is suitable for active filters that need more bandwidth than a precision-only operational amplifier can provide. Its 90 MHz gain-bandwidth product and 22 V/µs slew rate preserve signal amplitude and phase through wide-band filtering stages, while the family is intended to maintain high-accuracy behavior. At high operating frequencies, component tolerances, PCB parasitics, and op-amp gain-bandwidth interactions become more important than nominal DC offset alone. The standard LT1469 should be used with a feedback network that maintains a closed-loop gain of five or greater. The LT1469-2 offers an alternative for designs requiring stable operation at gain two.

🖥️

Precision Test and Measurement

The LT1469IN8 can serve as a fast settling buffer in test and measurement equipment that must produce accurate levels within a short acquisition interval. The 900 ns settling time to 150 µV for a 10 V step provides a defined basis for comparing large-signal response, while the 90 MHz bandwidth and 22 V/µs slew rate support higher-frequency test signals. Two independent channels can reduce component count in differential fixtures or dual-channel instruments. When driving a back-terminated instrument input, verify capacitive loading and output settling rather than relying on bandwidth alone. Stable feedback gain and adequate output current are also required for reliable measurements into practical test-equipment impedances.

📈

Precision Data Acquisition

The LT1469IN8 is appropriate for precision data-acquisition systems that condition moderate-bandwidth analog inputs before sampling or digitization. Its dual-channel configuration supports two inputs without requiring separate packages, while the 16-bit accuracy positioning and fast settling characteristics help preserve the dynamic range of the acquisition chain. Use short input routes and guard the non-inverting inputs against stray capacitance because high-impedance nodes can reduce isolation between adjacent channels. The standard device's gain-of-five stability requirement must be respected in each feedback network. For lower-gain channels, the LT1469-2 family can provide the intended stability without changing the 8-pin PDIP mechanical footprint.

Buod ng mga Inirekomendang Produkto

LT1469IN8 Analog Devices Ginagamit sa: ADC Input Buffer, DAC Current-to-Voltage Conversion, Precision Instrumentation Signal Conditioning, High-Speed Active Filtering, Precision Test and Measurement, Precision Data Acquisition LT1469-2IN8#PBF Family option for stable gain-of-two operation Ginagamit sa: ADC Input Buffer, Precision Data Acquisition LT1469CN8#PBF Same-family dual conversion amplifier option Ginagamit sa: DAC Current-to-Voltage Conversion, Precision Test and Measurement LT1469-2CN8#PBF Lower-gain stable instrumentation option Ginagamit sa: Precision Instrumentation Signal Conditioning LT1469IN8#PBF Lead-free 8-PDIP ordering option Ginagamit sa: High-Speed Active Filtering
What is the LT1469IN8?
The LT1469IN8 is a dual precision operational amplifier with a 90 MHz gain-bandwidth product, 22 V/µs slew rate, and 16-bit accuracy in an 8-pin PDIP package. According to the Analog Devices product page, its combination of precision and high-frequency performance makes it suitable for DAC current-to-voltage conversion, ADC buffering, and other precision signal-conditioning circuits.
What are the key specifications of LT1469IN8 that engineers should know?
The LT1469IN8 provides two amplifier channels, 90 MHz gain-bandwidth product, 22 V/µs slew rate, and 900 ns settling to 150 µV for a 10 V step. Analog Devices describes the device as a 16-bit-accurate precision operational amplifier. It is supplied in an 8-pin PDIP package with 0.300-inch lead spacing for through-hole PCB assembly.
What is the supply voltage range of LT1469IN8?
The LT1469IN8 operates from a single supply or dual supplies within the voltage limits defined by the Analog Devices LT1469 datasheet. The exact minimum and maximum supply voltages, along with the associated input and output common-mode ranges, are marked as required data because those limits are not numerically reproduced on the manufacturer product page used for this listing.
Where can I download the LT1469IN8 datasheet PDF?
The official LT1469IN8 datasheet PDF is available from Analog Devices at the manufacturer's 1469fb.pdf link listed on this page. The document contains the device description, electrical characteristics, package information, and application details. Use the manufacturer datasheet as the controlling document for supply limits, pin functions, biasing requirements, and test conditions.
Where can I find the LT1469IN8 pinout?
The LT1469IN8 uses an 8-pin PDIP with two complete operational-amplifier channels. The manufacturer datasheet contains the authoritative pin-description diagram and numbering. Use that pin table when assigning signals, particularly on dual-supply designs where the supply pins and input common-mode range must be checked before routing either channel.
What is the minimum stable gain of the LT1469IN8?
The standard LT1469 is intended for closed-loop gains of five or greater; the Analog Devices LT1469-2 page identifies the LT1469-2 as the version decompensated for gain of two or greater. If the circuit requires stable unity-gain or gain-of-two operation, use the appropriate decompensated family member rather than assuming that the standard LT1469 is interchangeable in every feedback configuration.
LT1469IN8 vs LT1469-2: which is better for a gain-of-two amplifier?
The LT1469-2 is the better choice for a stable gain-of-two circuit because Analog Devices specifically describes it as decompensated for gains of two or greater. The standard LT1469 is optimized for gains of five or above. Both belong to the dual precision high-speed LT1469 family, but their stability domains must be checked before treating one as a functional drop-in replacement.
When should I choose LT1469IN8 over another LT1469 variant?
Choose the standard LT1469IN8 when the circuit needs two precision channels, a gain of five or higher, 90 MHz gain-bandwidth product, and fast settling in an 8-pin PDIP footprint. Choose LT1469-2 for stable operation at gain two or higher, or select another listed LT1469 temperature and package option when environmental rating or mechanical requirements differ.
Can LT1469CN8#PBF replace LT1469IN8?
The LT1469CN8#PBF can serve as a pin-compatible LT1469-family option in an 8-pin PDIP footprint, but its temperature grade and orderable suffix must be checked against the original assembly requirements. Both devices are dual precision high-speed amplifiers, yet environmental suitability and exact operating-temperature limits can distinguish the commercial and industrial variants.
What is the best drop-in replacement for LT1469IN8?
The closest same-family drop-in choices include LT1469CN8#PBF, LT1469IN8#PBF, LT1469-2CN8#PBF, and LT1469-2IN8#PBF when an 8-pin PDIP implementation is required. The LT1469-2 alternatives change the minimum stable gain, while commercial and industrial suffixes change temperature grading. Confirm package, gain stability, supply range, and environmental requirements before replacement.
Is the LT1469IN8 suitable for ADC input buffering?
Yes, the LT1469IN8 is suitable for ADC input buffering because Analog Devices identifies ADC buffers as a high-accuracy application and specifies 90 MHz bandwidth, 22 V/µs slew rate, and 900 ns settling to 150 µV. The buffer must still be configured for stable gain, and its output swing and input common-mode range must support the converter interface.
Is the LT1469IN8 suitable for DAC current-to-voltage conversion?
Yes, the LT1469IN8 is well suited to DAC current-to-voltage conversion because Analog Devices identifies this application specifically for the LT1469 family. Its precision offset characteristics, 22 V/µs slew rate, and 900 ns settling behavior support accurate conversion of rapidly changing DAC currents into an analog voltage while preserving low static error.
How much thermal dissipation should I allow for in an LT1469IN8 design?
Thermal dissipation depends on the selected supply voltage, output swing, load current, and ambient temperature, so a single package dissipation value cannot be assigned without those operating conditions. Estimated: use P = (VS - VOUT) × ILOAD plus the internal contribution described by the manufacturer datasheet. Check the resulting junction temperature against the device rating and PCB copper area.
Where can I buy LT1469IN8 and what is its price?
Use the Request a Quote form on this page to request the current LT1469IN8 unit price, stock status, lead time, and minimum order quantity. The form is the appropriate channel for a quote-first purchase because commercial terms and availability can change without changing the component's electrical characteristics or manufacturer documentation.
What is the lead time and stock status for LT1469IN8?
Request the current LT1469IN8 inventory position, production lead time, and minimum order quantity through the Request a Quote form on this page. The manufacturer product page identifies the LT1469 family as an active product, but exact lot availability and scheduling should be confirmed for the specific PDIP package and orderable suffix.
Is LT1469IN8 RoHS and REACH compliant?
The numerical RoHS and REACH status should be confirmed from the current manufacturer product declaration for the exact orderable suffix. Analog Devices identifies the LT1469 as an active product, but the manufacturer product page used for this listing does not reproduce a complete compliance declaration. The Request a Quote form can provide current documentation for the selected suffix.

Impormasyon ng Talumpati sa Engineering for LT1469IN8 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose LT1469IN8 for precision, fast-settling dual-channel signal conditioning in an 8-pin PDIP design when the closed-loop gain is five or higher. Its 90 MHz gain-bandwidth product, 22 V/µs slew rate, and 900 ns settling to 150 µV make it appropriate for ADC buffers, DAC current-to-voltage conversion, instrumentation, and active filtering. Choose LT1469-2IN8#PBF when stable operation at gain two is required, since the decompensated family variant changes the minimum stable gain from five to two. LT1469CN8#PBF may be appropriate where a commercial temperature grade is sufficient, whereas the IN8 designation targets industrial use. LT1469IN8#PBF provides the same core LT1469 configuration with a lead-free ordering suffix. For every option, verify the exact supply range, temperature limits, common-mode range, output swing, and required gain stability before finalizing the PCB.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto LT1469IN8#PBF LT1469CN8#PBF LT1469-2CN8#PBF LT1469-2IN8#PBF
Package 8-PDIP 8-PDIP 8-PDIP 8-PDIP 8-PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Channels 2 2 2 2 2
Gain-Bandwidth Product 90 MHz 90 MHz 90 MHz 90 MHz 90 MHz
Slew Rate 22 V/µs 22 V/µs 22 V/µs 22 V/µs 22 V/µs
Accuracy Class 16-bit 16-bit family 16-bit family 16-bit family 16-bit family
Minimum Stable Gain 5 5 5 2 2
Temperature Grade Industrial IN8 grade Industrial IN8 grade Commercial CN8 grade Commercial CN8 grade Industrial IN8 grade

Pangunahing mga Pagkakaiba

  • Precision and high-speed performance in one dual amplifier (kumpara saGeneral-purpose dual operational amplifiers)
  • Fast large-signal settling (kumpara saLower-bandwidth precision amplifiers)
  • Dual channels in an 8-pin PDIP (kumpara saSingle-channel precision amplifiers)
  • Lower-gain family alternative (kumpara saLT1469IN8)

Talaan ng Disenyo

Do not operate the standard LT1469 below its minimum stable gain of five. The LT1469-2 is decompensated for stable gain of two or greater and is the appropriate family option when the feedback network requires lower gain. Reusing a standard LT1469 in a gain-of-two circuit can produce ringing or unstable operation even though the package, bandwidth, and slew rate are identical.

Keep the input and feedback traces short, place feedback resistors close to the relevant input pins, and maintain a continuous ground plane beneath the package. High-impedance input nodes should be surrounded by guard traces or kept away from switching nodes. These practices reduce parasitic capacitance and feedback-loop delay, which become increasingly important when operating near the device's 90 MHz gain-bandwidth product.

Place the required supply-decoupling capacitors close to pins 4 and 8, with the ground return connected to a low-impedance plane. Decoupling helps isolate the fast-settling amplifier from supply disturbances, but capacitor selection should follow the manufacturer recommendations. Check output drive and load current at the selected supply voltage because a large output excursion and capacitive load can change dynamic performance.

Account for settling time and the complete acquisition interval when using the LT1469IN8 ahead of an ADC or DAC. The manufacturer specifies 900 ns settling to 150 µV for a 10 V step, but converter aperture time, source impedance, sampling kickback, and filter delay add to the total acquisition budget. Validate the complete signal chain rather than attributing settling performance to the amplifier alone.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The LT1469IN8#PBF lead-free ordering option is listed by Analog Devices, but complete RoHS, REACH, halogen-free, and conflict-minerals declarations for the exact suffix were not reproduced in the cited product information.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

LT1469IN8 datasheet LT1469IN8 pinout LT1469IN8 datasheet pdf LT1469IN8 schematic LT1469IN8 equivalent LT1469IN8 replacement LT1469IN8 cross reference LT1469IN8 vs LT1469-2 LT1469IN8 footprint LT1469IN8 spice model LT1469IN8 price LT1469IN8 stock Analog Devices LT1469IN8 LT1469 8-PDIP pinout LT1469 ADC buffer application

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices LT1469IN8 LT1469IN8#PBF LT1469CN8#PBF LT1469-2IN8#PBF LT1469-2CN8#PBF operational amplifier precision amplifier high-speed amplifier voltage-feedback amplifier dual amplifier ADC buffer DAC current-to-voltage converter gain-bandwidth product slew rate settling time input offset voltage 8-PDIP DIP through-hole package active feedback precision signal conditioning common-mode rejection ratio
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ