LT1469IN8 - Dual 90MHz Precision Op Amp | Analog Devices
料号: LT1469IN8 ✓ 量产中LT1469IN8 概述
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs while providing high input impedance, low output impedance, and controlled gain through external feedback. Within the amplifier hierarchy, the LT1469IN8 belongs to the voltage-feedback operational-amplifier family and combines precision, high-speed, and low-noise characteristics in one dual-channel device.
The LT1469 family provides two independent amplifiers, a 90 MHz gain-bandwidth product, a 22 V/µs slew rate, and input offset voltage suitable for precision applications. According to the Analog Devices LT1469 product information and datasheet, the device settles to within 150 µV in 900 ns after a 10 V step. Its initial offset-voltage accuracy and drift characteristics make it useful when static error must remain small while signals change quickly.
The LT1469 combines a precision input stage with high-bandwidth AC performance. Its operating characteristics suit closed-loop signal conditioning above the audio range, provided the feedback network, load, and output-swing requirements are evaluated for the selected gain. Because the standard LT1469 is optimized for a minimum stable gain of five, applications requiring unity-gain or gain-of-two stability should examine the LT1469-2 variant.
Typical uses include ADC signal buffers, DAC current-to-voltage converters, precision instrumentation, active filters, and high-speed test equipment. The dual configuration saves board area when two amplified channels are required. In data-conversion systems, its fast settling behavior can shorten the interval before a converter samples the amplified signal, while low DC offset helps preserve code-level accuracy.
PCB design should use short feedback paths, a solid ground plane, and careful routing around high-impedance input nodes. Decoupling capacitors should be placed close to the supply pins, and unused amplifier inputs should be tied to a defined potential rather than left floating. The package is a through-hole 8-pin PDIP, allowing conventional plated-through-hole layouts and straightforward prototype assembly.
This product page organizes the manufacturer specifications, drop-in family alternatives, package details, application guidance, and design considerations into one engineering reference. It also highlights the distinction between the standard LT1469 and the decompensated LT1469-2, which is important when stable operation at a lower closed-loop gain is required.
直接替换替代料: LT1469IN8 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
LT1469IN8#PBF
✅ 直接替换📋 参考替代料(不在目录中)
LT1469CN8#PBF
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LT1469-2CN8#PBF
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LT1469-2IN8#PBF
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
LT1469IN8 最大额定值与电气特性
| Amplifier Type | Dual precision operational amplifier |
| Number of Channels | 2 channels |
| Gain-Bandwidth Product | 90 MHz |
| Slew Rate | 22 V/µs |
| Settling Time | 900 ns to 150 µV for a 10 V step |
| Accuracy | 16-bit |
| Minimum Stable Gain | 5 for the standard LT1469 |
| 封装 | 8-pin PDIP, 0.300-inch lead spacing |
| 安装类型 | Through-hole |
LT1469IN8 引脚配置
| 引脚 1 | OUT A — Output of amplifier A |
| 引脚 2 | -IN A — Inverting input of amplifier A |
| 引脚 3 | +IN A — Non-inverting input of amplifier A |
| 引脚 4 | V- — Negative supply connection |
| 引脚 5 | +IN B — Non-inverting input of amplifier B |
| 引脚 6 | -IN B — Inverting input of amplifier B |
| 引脚 7 | OUT B — Output of amplifier B |
| 引脚 8 | V+ — Positive supply connection |
典型应用
LT1469IN8 适用于 6 应用s: ADC Input Buffer, DAC Current-to-Voltage Conversion, Precision Instrumentation Signal Conditioning, High-Speed Active Filtering, Precision Test and Measurement, Precision Data Acquisition.
ADC Input Buffer
The LT1469IN8 fits precision ADC front ends that require accurate signal amplification before conversion. Its 90 MHz gain-bandwidth product and 22 V/µs slew rate allow both the DC accuracy and large-signal behavior needed to preserve converter code integrity. A useful implementation places the amplifier directly at the ADC input so the 10 V step settling specification can reduce the interval before sampling. Because the standard LT1469 is optimized for closed-loop gain of five or higher, use the LT1469-2 when the required gain is two. The tradeoff is increased power dissipation and potentially poorer settling performance when operating below the minimum stable gain.
推荐
DAC Current-to-Voltage Conversion
The LT1469IN8 can convert the differential output current of a current-output DAC into a useful voltage. Its 16-bit accuracy class, low-offset focus, 22 V/µs slew rate, and 900 ns settling to 150 µV for a 10 V step help preserve both static and dynamic DAC resolution. The usual circuit uses the dual amplifier channels for differential conversion or for an instrumentation-style output stage. Feedback resistor matching and the DAC's compliance voltage determine the achievable output range, so those values must be calculated separately. Compared with a general-purpose amplifier, the LT1469 family is specifically positioned for high-accuracy conversion applications.
推荐
Precision Instrumentation Signal Conditioning
Instrumentation systems benefit from the LT1469IN8 when sensor signals require low-offset amplification without sacrificing response time. The 90 MHz gain-bandwidth product supports closed-loop gains of five or higher, while 16-bit accuracy and fast settling make the device appropriate for laboratory measurement chains. Two channels can handle complementary sensor outputs or sequential measurement paths in a compact 8-pin PDIP footprint. The design must account for sensor impedance, resistor network noise, input common-mode limits, and output loading. At high closed-loop gain, the amplifier bandwidth remains above the signal bandwidth, but resistor tolerances and parasitic capacitance may dominate practical accuracy.
推荐
High-Speed Active Filtering
The LT1469IN8 is suitable for active filters that need more bandwidth than a precision-only operational amplifier can provide. Its 90 MHz gain-bandwidth product and 22 V/µs slew rate preserve signal amplitude and phase through wide-band filtering stages, while the family is intended to maintain high-accuracy behavior. At high operating frequencies, component tolerances, PCB parasitics, and op-amp gain-bandwidth interactions become more important than nominal DC offset alone. The standard LT1469 should be used with a feedback network that maintains a closed-loop gain of five or greater. The LT1469-2 offers an alternative for designs requiring stable operation at gain two.
推荐
Precision Test and Measurement
The LT1469IN8 can serve as a fast settling buffer in test and measurement equipment that must produce accurate levels within a short acquisition interval. The 900 ns settling time to 150 µV for a 10 V step provides a defined basis for comparing large-signal response, while the 90 MHz bandwidth and 22 V/µs slew rate support higher-frequency test signals. Two independent channels can reduce component count in differential fixtures or dual-channel instruments. When driving a back-terminated instrument input, verify capacitive loading and output settling rather than relying on bandwidth alone. Stable feedback gain and adequate output current are also required for reliable measurements into practical test-equipment impedances.
推荐
Precision Data Acquisition
The LT1469IN8 is appropriate for precision data-acquisition systems that condition moderate-bandwidth analog inputs before sampling or digitization. Its dual-channel configuration supports two inputs without requiring separate packages, while the 16-bit accuracy positioning and fast settling characteristics help preserve the dynamic range of the acquisition chain. Use short input routes and guard the non-inverting inputs against stray capacitance because high-impedance nodes can reduce isolation between adjacent channels. The standard device's gain-of-five stability requirement must be respected in each feedback network. For lower-gain channels, the LT1469-2 family can provide the intended stability without changing the 8-pin PDIP mechanical footprint.
推荐
推荐产品汇总
工程参考数据: LT1469IN8 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | LT1469IN8#PBF | LT1469CN8#PBF | LT1469-2CN8#PBF | LT1469-2IN8#PBF |
|---|---|---|---|---|---|
| Package | 8-PDIP | 8-PDIP | 8-PDIP | 8-PDIP | 8-PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 2 | 2 | 2 | 2 | 2 |
| Gain-Bandwidth Product | 90 MHz | 90 MHz | 90 MHz | 90 MHz | 90 MHz |
| Slew Rate | 22 V/µs | 22 V/µs | 22 V/µs | 22 V/µs | 22 V/µs |
| Accuracy Class | 16-bit | 16-bit family | 16-bit family | 16-bit family | 16-bit family |
| Minimum Stable Gain | 5 | 5 | 5 | 2 | 2 |
| Temperature Grade | Industrial IN8 grade | Industrial IN8 grade | Commercial CN8 grade | Commercial CN8 grade | Industrial IN8 grade |
关键差异点
- Precision and high-speed performance in one dual amplifier (对比 General-purpose dual operational amplifiers)
- Fast large-signal settling (对比 Lower-bandwidth precision amplifiers)
- Dual channels in an 8-pin PDIP (对比 Single-channel precision amplifiers)
- Lower-gain family alternative (对比 LT1469IN8)
设计说明
Do not operate the standard LT1469 below its minimum stable gain of five. The LT1469-2 is decompensated for stable gain of two or greater and is the appropriate family option when the feedback network requires lower gain. Reusing a standard LT1469 in a gain-of-two circuit can produce ringing or unstable operation even though the package, bandwidth, and slew rate are identical.
Keep the input and feedback traces short, place feedback resistors close to the relevant input pins, and maintain a continuous ground plane beneath the package. High-impedance input nodes should be surrounded by guard traces or kept away from switching nodes. These practices reduce parasitic capacitance and feedback-loop delay, which become increasingly important when operating near the device's 90 MHz gain-bandwidth product.
Place the required supply-decoupling capacitors close to pins 4 and 8, with the ground return connected to a low-impedance plane. Decoupling helps isolate the fast-settling amplifier from supply disturbances, but capacitor selection should follow the manufacturer recommendations. Check output drive and load current at the selected supply voltage because a large output excursion and capacitive load can change dynamic performance.
Account for settling time and the complete acquisition interval when using the LT1469IN8 ahead of an ADC or DAC. The manufacturer specifies 900 ns settling to 150 µV for a 10 V step, but converter aperture time, source impedance, sampling kickback, and filter delay add to the total acquisition budget. Validate the complete signal chain rather than attributing settling performance to the amplifier alone.
合规信息
The LT1469IN8#PBF lead-free ordering option is listed by Analog Devices, but complete RoHS, REACH, halogen-free, and conflict-minerals declarations for the exact suffix were not reproduced in the cited product information.