MAX1093AEEG - 250ksps 4-Ch 10-Bit ADC +2.5V Ref | Maxim Integrated
MPN: MAX1093AEEG ✗ Tapus ng BuhayMAX1093AEEG Ulas
An SAR (Successive Approximation Register) ADC is a type of data converter that converts an analog input voltage into a digital code using a binary-search algorithm implemented by switching an internal capacitive DAC. SAR ADCs sit in the broader hierarchy of analog-to-digital converters (ADC -> data converter -> mixed-signal IC -> power management and signal-chain semiconductor). The MAX1093AEEG occupies the low-power, medium-speed tier of this hierarchy, optimized for portable instrumentation and battery-powered data acquisition systems where the combination of modest 250 ksps throughput, integrated reference, and automatic power-down enables long battery life without sacrificing conversion fidelity.
Key features of the MAX1093AEEG include an INL of 0.5 LSB (max), an input voltage range of 0 to +2.5V (single-ended) or +/-1.25V (pseudo-differential), 2 us wake-up from power-down, 4-channel analog input multiplexer, and an internal +2.5V reference. The integrated reference eliminates external reference circuitry and reduces PCB area, while the parallel interface allows direct connection to microcontrollers and DSPs without glue logic.
The MAX1093AEEG uses a charge-redistribution DAC architecture for the successive-approximation conversion. Automatic power-down between conversions reduces supply current to microampere levels, making the part well-suited for battery-powered applications. The internal +2.5V reference is trimmed for low drift, and the analog inputs feature a sample-and-hold stage that accepts rapidly changing signals without an external track-and-hold amplifier.
Typical applications include portable data loggers, pen-input digitizers, industrial process control, patient monitoring, and instrumentation where 10-bit resolution is sufficient and low power consumption is critical. The MAX1093AEEG also fits well in test and measurement front-ends and signal-conditioning subsystems requiring multiple input channels.
When designing with the MAX1093AEEG, ensure the input signal does not exceed the supply voltage (VDD up to +3.6V) or the reference voltage. Add a 100nF decoupling capacitor close to the AVDD pin and a 10uF bulk capacitor to filter low-frequency supply noise. Drive the analog inputs with low-impedance sources to maintain AC performance, and consider the input mux settling time when sequencing channel reads.
This page synthesizes distributor pricing, drop-in alternatives (including the +5V MAX1092BEEG and the 8-channel MAX1091 family), and practical design notes not found in the manufacturer datasheet alone.
Mga alternatibo na pwedeng ilagay na MAX1093AEEG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MAX1093AEEG (parehas na form factor at footprint) — pagkakaiba sa Input Voltage Range, Internal Reference, Wake-Up Time, Package, Resolution.
MAX1093BEEG
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MAX1093ACEG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MAX1092BEEG
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MAX1093AEEG Mga Pinakamataas na Rating at Electrical Characteristics
| Pangangasiwaan | 10 bits |
| Number of Input Channels | 4 single-ended / 2 pseudo-differential |
| Rate ng Pagkupita | 250 ksps |
| Architecture | SAR (Successive Approximation) |
| Hanay ng Voltage ng Input | 0 to +2.5V (single-ended), +/-1.25V (pseudo-differential) |
| INL (max) | 0.5 LSB |
| Internal Reference | +2.5V |
| Interface | Parallel (byte-wide) |
| Volte ng Pagbibigay | +2.7V to +3.6V |
| Wake-Up Time | 2 us |
| Power-Down Feature | Yes (automatic) |
| On-Chip Clock | Yes |
| Temperature na Operasyon | 0C to +70C (commercial) |
| Packhaging | 24-pin QSOP |
| Uri ng Pagpapasok | Surface Mount |
Pin Configuration ng MAX1093AEEG
| Pin 1 | AVDD — Analog supply voltage (+3V) |
| Pin 2 | AIN0 — Analog input channel 0 |
| Pin 3 | AIN1 — Analog input channel 1 |
| Pin 4 | AIN2 — Analog input channel 2 |
| Pin 5 | AIN3 — Analog input channel 3 |
| Pin 6 | REF — +2.5V reference output |
| Pin 7 | REFADJ — Reference adjust input |
| Pin 8 | AGND — Analog ground |
| Pin 9 | DGND — Digital ground |
| Pin 10 | DVDD — Digital supply voltage (+3V) |
| Pin 11 | CS — Chip select (active low) |
| Pin 12 | RD — Read strobe (active low) |
| Pin 13 | WR/RDY — Write/ready signal |
| Pin 14 | D0 — Parallel data bit 0 (LSB) |
| Pin 15 | D1 — Parallel data bit 1 |
| Pin 16 | D2 — Parallel data bit 2 |
| Pin 17 | D3 — Parallel data bit 3 |
| Pin 18 | D4 — Parallel data bit 4 |
| Pin 19 | D5 — Parallel data bit 5 |
| Pin 20 | D6 — Parallel data bit 6 |
| Pin 21 | D7 — Parallel data bit 7 (MSB) |
| Pin 22 | CNVST — Convert start input |
| Pin 23 | SHDN — Shutdown input (active low) |
| Pin 24 | CLK — External clock input (optional) |
Tipikal na mga Gamit
MAX1093AEEG ay nararapat para sa 6 aplikasyons: Portable Data Loggers, Industrial Process Control, Patient Monitoring Equipment, Pen-Input Digitizers and Touch Tablets, Test and Measurement Front-Ends, Signal Conditioning Subsystems.
Portable Data Loggers
The MAX1093AEEG is ideal for battery-powered portable datagers due to its automatic power-down and 2 us wake-up. The internal +2.5V reference eliminates an external reference IC, saving board area in compact handheld enclosures. The 4 single-ended input channels cover multiple sensor inputs (temperature, pressure, humidity) without external muxing, while the 250 ksps sample rate handles vibration and acoustic-band signals. The byte-wide parallel interface streams digitized data directly to a low-power microcontroller without glue logic, keeping system BOM low.
Inirekomenda
Industrial Process Control
In industrial PLC analog input modules, the MAX1093AEEG digitizes 4-20 mA-conditioned sensor signals via pseudo-differential inputs. The +/-1.25V pseudo-differential input range naturally accommodates bipolar transducer outputs after signal conditioning, while the 0.5 LSB INL provides adequate linearity for 10-bit process control loops. The QSOP-24 footprint supports high-density multi-channel analog front-end designs, and the parallel interface reduces firmware complexity when interfacing with industrial DSPs.
Inirekomenda
Patient Monitoring Equipment
Medical patient monitoring systems use the MAX1093AEEG to digitize biosignals such as ECG, SpO2, and temperature in compact bedside monitors. The 250 ksps sample rate is sufficient for ECG bandwidth (typically <500 Hz sampled at 1-2 ksps per channel) while 4 channels support multi-lead acquisition. The internal reference and automatic power-down extend battery life in portable telemetry units, and the QSOP-24 package enables slim form-factor designs required by wearable monitors.
Inirekomenda
Pen-Input Digitizers and Touch Tablets
Digitizer tablets rely on the MAX1093AEEG to sample pen-position sensor signals at 250 ksps with 10-bit resolution, which provides sub-0.1 percent full-scale positional accuracy for handwriting recognition. The 4 single-ended inputs handle multiple pen-axis sensor channels, while the parallel byte-wide interface streams samples directly to the host processor without DMA delays. The 2 us wake-up enables instant response when the stylus touches the active area, critical for low-latency input feel.
Inirekomenda
Test and Measurement Front-Ends
Bench multimeters and portable instrumentation use the MAX1093AEEG as a multi-channel ADC front-end, taking advantage of its 250 ksps throughput and integrated +2.5V reference for self-calibrated readings. The 4 single-ended channels allow simultaneous measurement of voltage, current, and temperature in compact DMM designs, while the parallel interface simplifies data transfer to instrumentation microcontrollers. The 0.5 LSB INL supports 10-bit measurement accuracy suitable for general-purpose bench tools.
Inirekomenda
Signal Conditioning Subsystems
Embedded signal-conditioning subsystems use the MAX1093AEEG to digitize analog sensor outputs after front-end amplification and filtering. The pseudo-differential input mode rejects common-mode noise on long sensor cables, while the integrated +2.5V reference ratiometrically scales the input range for accurate conversion. The 250 ksps sample rate captures transient events in vibration monitoring and motor control feedback loops, and the QSOP-24 package fits into compact interface boards alongside op-amp signal chains.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX1093AEEG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX1093BEEG | MAX1093ACEG | MAX1092BEEG |
|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Package | QSOP-24 | QSOP-24 - same | QSOP-24 - same | QSOP-24 - same |
| Resolution | 10 bits | 10 bits | 10 bits | 10 bits |
| Supply Voltage | +2.7V to +3.6V | +2.7V to +3.6V | +2.7V to +3.6V | +4.75V to +5.25V (+5V version) |
| Input Channels | 4 single-ended / 2 pseudo-diff | 4 single-ended / 2 pseudo-diff | 4 single-ended / 2 pseudo-diff | 4 single-ended / 2 pseudo-diff |
| Sample Rate | 250 ksps | 250 ksps | 250 ksps | 400 ksps |
| Internal Reference | +2.5V | +2.5V | +2.5V | +2.5V |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
Pangunahing mga Pagkakaiba
- Integrated +2.5V reference saves external reference IC (kumpara saMAX1092BEEG)
- Lower power consumption via automatic power-down (kumpara saMAX1093ACEG)
- B-grade variant offers tighter linearity (kumpara saMAX1093BEEG)
Talaan ng Disenyo
Decouple AVDD and DVDD with a 100nF ceramic capacitor placed within 5mm of each supply pin, plus a 10uF bulk tantalum or ceramic capacitor on AVDD to filter low-frequency supply noise. The internal +2.5V reference draws current only during conversion, so transient load on AVDD can affect reference stability - place the 10uF capacitor as close to AVDD as practical. Use separate analog and digital ground planes joined at a single point near the AGND pin to avoid ground-loop noise coupling into the analog inputs.
Route analog input traces (AIN0-AIN3) as short, guarded differential pairs and keep them away from the parallel data bus (D0-D7) to minimize digital-to-analog crosstalk. Place a ground fill under and around the analog input traces, and use a separate analog ground island that joins the digital ground only at the AGND pin. If using the pseudo-differential mode, route AIN+ and AIN- as a matched pair with equal length to maintain common-mode rejection.
Do not apply analog inputs that exceed AVDD or drop below AGND - this can latch-up the input ESD diodes and corrupt conversions. The SHDN pin must be held high (logic 1) for normal operation; if left floating, the part may enter an indeterminate state. When using the CNVST pin to start conversions, ensure the pulse width meets the minimum timing specification in the datasheet (typically >20ns). Do not enable the internal reference and drive an external reference simultaneously on REF - this can cause reference contention and degraded performance.
Impormasyon ng Pagsunod sa Kautusan
Part is obsolete on the Analog Devices product page. RoHS/REACH/AEC-Q100 status not explicitly stated in verified web data; marked unknown. Lead-free per Maxim Integrated legacy datasheet.
