Analog Devices

MAX202ICSE+ - 120kbps RS-232 Transceiver | Analog Devices

MPN: MAX202ICSE+ ✓ Nakahanda
4.5V to 5.5V Vdss 16-SOIC narrow Package
MOQ: 1 |

MAX202ICSE+ Ulas

The Analog Devices MAX202ICSE+ is a 2/2 RS-232 transceiver with two drivers and two receivers, support for data rates up to 120kbps, and operation from a 4.5V to 5.5V single supply. The device is housed in a 16-pin narrow SOIC surface-mount package and uses 0.1µF external charge-pump capacitors.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a RS-232 port. It combines differential voltage drivers and receiver inputs with charge-pump circuitry that develops the positive and negative voltages required by the RS-232 standard. Within the interface hierarchy, the MAX202ICSE+ belongs to the RS-232 transceiver class of interface ICs.

The principal operating specifications include two transmit channels, two receive channels, a maximum data rate of 120kbps, and a 4.5V to 5.5V supply range. Its receivers provide 500mV hysteresis, which improves noise immunity around the RS-232 threshold. The 16-SOIC package supports compact surface-mount construction while exposing the driver outputs, receiver inputs, supply connections, ground reference, and external capacitor connections.

The MAX202 family generates the bipolar voltage levels required by RS-232 from a single 5V supply. External 0.1µF capacitors support the internal charge-pump network, allowing the transceiver to produce approximately ±5V output levels when operated according to the EIA/TIA-232E requirements. The 120kbps capability makes the device suitable for data links beyond low-speed serial-console applications while retaining the familiar RS-232 physical interface.

Typical uses include industrial control systems, data-acquisition equipment, instrumentation, service consoles, and embedded systems that communicate with legacy RS-232 peripherals. The two-driver and two-receiver arrangement supports full-duplex point-to-point communication. It is especially useful where a modern controller has a logic-level UART but the connected equipment still requires an RS-232 electrical interface.

PCB design should keep the charge-pump capacitors close to their designated pins and route the RS-232 driver outputs away from sensitive receiver and logic traces. Decoupling should provide a low-impedance connection between the device supply and ground, while the interface enclosure and cable should handle external electrostatic discharge and surge exposure that is outside the IC itself.

This product page combines the MAX202 electrical specifications, package details, sourcing guidance, comparison parameters, and implementation notes needed to evaluate the MAX202ICSE+ for a new RS-232 interface or a controlled replacement on an existing 16-SOIC design.

Mga alternatibo na pwedeng ilagay na MAX202ICSE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX202ICSE+ (parehas na form factor at footprint) — pagkakaiba sa Product Type, Package, Maximum Data Rate, Charge Pump, Transceiver Configuration.

Maxim Integrated
Product Type: Dual RS-232 transceiver interface IC
Package: 16-pin SOIC
Maximum Data Rate: In excess of 120 kbps
Ikabit sa MAX202ICSE+ →
Maxim Integrated
Product Type: RS-232 transceiver
Package: 16-pin narrow SOIC
Maximum Data Rate: 120 kbit/s
Ikabit sa MAX202ICSE+ →
Analog Devices
Product Type: Dual RS-232 transceiver
Package: 16-pin narrow SOIC
Charge Pump: Integrated
Ikabit sa MAX202ICSE+ →

MAX202ESE+

✅ Drop-In
Analog Devices
📦 16-SOIC narrow
Dual RS-232 transceiver · 2 · 2 · +5 V · In excess of 120 kbps · ±5 V EIA/TIA-232E · Integrated · 0.1 µF

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX202CSE+

✅ Drop-In
Maxim Integrated
📦 16-SOIC narrow
Dual RS-232 transceiver interface IC · +5 V · 2 · 2 · In excess of 120 kbps · ±5 V EIA/TIA-232E · 0.1 µF · EIA/TIA-232E

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX202ECSE+T

✅ Drop-In
Maxim Integrated
📦 16-SOIC narrow
RS-232 transceiver · 2/2 full-duplex · 2 · 2 · +5 V · 120 kbit/s · 30 V/µs · ±15 kV HBM

Magkontak para sa presyo

Tingnan ang Datasheet →

TRS202EID

✅ Drop-In
📦 16-SOIC narrow
Both provide 120kbps 2/2 RS-232 interfacing; confirm pin assignments, capacitor connections, supply range, and temperature limits before substitution

📋 Alternatibo na Reference (hindi sa katalogo)

MAX202ICSE+ Mga Spesipikasyon

Product Type 2/2 RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Protocol RS-232 / EIA-TIA-232E
Maximum Data Rate 120kbps
Supply Voltage Range 4.5V to 5.5V
RS-232 Output Signal Level ±5V
Receiver Hysteresis 500mV
External Capacitor Value 0.1µF
Hanay ng Temperature na Operasyon 0°C to 70°C
Packhaging 16-SOIC narrow
Bilang ng Pin 16 pins
Uri ng Pagpapasok Surface mount
Supply Configuration Single supply
Transceiver Configuration 2 transmit and 2 receive channels
Tube Packaging Tube

Gabay sa Pin Configuration ng MAX202ICSE+ 16-soic narrow

Pin configuration para sa MAX202ICSE+ (16-soic narrow package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-soic narrow package para sa MAX202ICSE+

Wala ng detalyadong pinout data na magagamit para sa MAX202ICSE+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX202ICSE+ ay nararapat para sa 6 aplikasyons: Industrial Controller RS-232 Port, Data-Acquisition Equipment, Embedded Service Console, Test and Measurement Instrument, Legacy Peripheral Interface, Point-to-Point Serial Link.

🏭

Industrial Controller RS-232 Port

The MAX202ICSE+ fits a controller that operates from a 5V logic rail but must communicate with legacy RS-232 equipment. Its two driver outputs and two receiver inputs support full-duplex point-to-point communication, while the 120kbps rating covers moderate-speed command and status traffic. The 4.5V to 5.5V supply range accommodates a regulated 5V system, and the 0°C to 70°C rating suits controlled indoor equipment. Verify the exact controller UART logic levels and connector-side protection requirements before integration.

🖥️

Data-Acquisition Equipment

The MAX202ICSE+ can connect a data-acquisition controller to an older instrument through a full-duplex RS-232 link. Two receiver channels allow status or measurement acknowledgments to return while two driver channels transmit commands or collected data. Its 120kbps maximum data rate is suitable for moderate instrument-control bandwidth, and the single 5V supply simplifies system power design. Add connector-level surge protection when the cable leaves an enclosure or connects to industrial equipment.

🔧

Embedded Service Console

The MAX202ICSE+ provides a practical bridge between an embedded processor UART and a PC-style RS-232 service connector. The processor can send configuration commands through one driver while monitoring replies through a receiver, with the second channel available for handshake or status signaling. The device supports 120kbps operation and requires only a single 5V supply, making it suitable for compact service-oriented electronics. Keep the driver output routing away from sensitive processor traces to minimize coupling.

📺

Test and Measurement Instrument

The MAX202ICSE+ is suited to a bench instrument that must exchange commands, readings, and diagnostic information over RS-232. Its 500mV receiver hysteresis improves recognition of signals in environments containing moderate electrical noise, while the 120kbps data-rate capability supports interactive laboratory communication. The narrow 16-SOIC package preserves board space in compact instruments. Confirm grounding strategy and cable length because the RS-232 interface depends on suitable reference ground and interconnect conditions.

⚡

Legacy Peripheral Interface

The MAX202ICSE+ enables a modern controller to retain compatibility with a legacy peripheral that exposes only a physical RS-232 port. Two transmit and two receive paths support bidirectional command exchange without requiring separate single-ended interface ICs. Its 4.5V to 5.5V operating range works with a regulated 5V controller rail, and its 120kbps limit suits many configuration and status protocols. Validate the peripheral connector pinout and signal polarity during hardware bring-up because DTE and DCE assignments can differ.

🌐

Point-to-Point Serial Link

The MAX202ICSE+ can implement a two-wire full-duplex RS-232 link between two systems with logic-level UARTs. Both ends require the appropriate transceiver orientation, and the shared ground must be connected through the cable. The device provides approximately ±5V signal levels and operates up to 120kbps under the specified EIA/TIA-232E loading conditions. The 16-SOIC package supports compact surface-mount assemblies, while external 0.1µF capacitors must be placed according to the manufacturer layout.

Buod ng mga Inirekomendang Produkto

TRS202EID 120kbps RS-232 interface candidate Ginagamit sa: Industrial Controller RS-232 Port, Data-Acquisition Equipment, Embedded Service Console, Test and Measurement Instrument, Legacy Peripheral Interface, Point-to-Point Serial Link MAX3221CDBR Texas Instruments Ginagamit sa: Industrial Controller RS-232 Port, Point-to-Point Serial Link MAX202ESE Same-family RS-232 interface variant Ginagamit sa: Data-Acquisition Equipment, Test and Measurement Instrument MAX202CSE+ Maxim Integrated Ginagamit sa: Embedded Service Console MAX202ECSE+T Maxim Integrated Ginagamit sa: Legacy Peripheral Interface
What is the operating voltage of MAX202ICSE+?
The MAX202ICSE+ operates from a single 4.5V to 5.5V supply. Its 5V-centered operating range matches conventional 5V logic systems while allowing normal supply tolerance around the nominal rail. According to the Analog Devices MAX202 product page and device documentation, the device supports two RS-232 driver outputs and two receiver inputs within this supply range.
What are the key specifications of MAX202ICSE+ that engineers should know?
The MAX202ICSE+ is a 2/2 RS-232 transceiver rated for data rates up to 120kbps at a 4.5V to 5.5V supply. It provides approximately ±5V RS-232 output levels, 500mV receiver hysteresis, two drivers, two receivers, and 0.1µF external charge-pump capacitors. The package is a narrow 16-SOIC surface-mount design rated from 0°C to 70°C.
Where to download the MAX202ICSE+ datasheet PDF?
The official MAX202 datasheet and product resources are available through the Analog Devices MAX202 product page at https://www.analog.com/en/products/max202.html. Use the manufacturer PDF for the definitive pin descriptions, electrical characteristics, charge-pump capacitor connection, and operating conditions. The product page also identifies related MAX202 package and ordering options.
Where can I find the MAX202ICSE+ pinout?
The MAX202ICSE+ pinout is documented in the Analog Devices MAX202 datasheet linked from the official product page. The device uses a 16-pin narrow SOIC package and includes supply, ground, two driver outputs, two receiver inputs, and charge-pump capacitor connections. Use the pin-description table and package drawing together when assigning PCB nets.
How fast can the MAX202ICSE+ transmit RS-232 data?
The MAX202ICSE+ supports data rates in excess of 120kbps when loaded in accordance with the EIA/TIA-232E specification. This rating applies to the complete interface under the specified loading conditions, not merely to an isolated driver waveform. The 120kbps capability supports moderate-speed serial links and legacy industrial peripherals.
What is the difference between MAX202ICSE+ and TRS202EID?
Both MAX202ICSE+ and TRS202EID are 120kbps-class, 2/2 RS-232 transceivers offered in 16-pin SOIC packages, making them relevant candidates for pin-to-pin design review. Their exact capacitor connections, supply limits, temperature ratings, and electrical limits must be checked against the individual manufacturer datasheets before production substitution. Use the manufacturer pin and application tables for the final approval.
When should I choose MAX202ICSE+ over TRS202EID?
Choose the MAX202ICSE+ when the design requires the established MAX202 function set, including two drivers, two receivers, 120kbps operation, and a 4.5V to 5.5V supply. A cross-design may favor TRS202EID only after its datasheet confirms the footprint, capacitor network, logic levels, and operating range match. Pin-package similarity alone is not enough to approve a replacement.
What is the best drop-in replacement for MAX202ICSE+?
The closest drop-in candidates are documented MAX202 16-SOIC variants and the TRS202EID, subject to a final datasheet review. A valid replacement must match the SOIC-16 footprint, pin assignments, 4.5V to 5.5V supply range, 120kbps interface rate, charge-pump capacitor connections, and temperature requirements. The Request a Quote form on this page can be used to identify the exact production suffix and package.
Can MAX202ICSE+ replace a MAX202ICSE+T assembly?
MAX202ICSE+ and MAX202ICSE+T identify closely related 16-SOIC MAX202 configurations, but the suffix must be checked against the manufacturer ordering information before interchange. Confirm the temperature range, package dimensions, pin configuration, and delivery format rather than relying only on the base family name. A PCB that was designed and qualified for one ordered suffix should retain that suffix whenever possible.
Is MAX202ICSE+ suitable for industrial equipment?
The MAX202ICSE+ is suitable for 5V equipment requiring a standard RS-232 port, including controllers, service interfaces, and data-acquisition equipment operating within its specified 0°C to 70°C range. For wider-temperature industrial environments, select a variant explicitly rated for the enclosure temperature. ESD and surge protection at the connector may also be required because the IC does not replace external protection components.
Does MAX202ICSE+ need external charge-pump capacitors?
Yes, the MAX202ICSE+ uses external 0.1µF capacitors for its charge-pump voltage generation. Connect the capacitors according to the MAX202 manufacturer pin and application diagrams, observing polarity and placement requirements. Adequate capacitor quality and short PCB traces help maintain stable bipolar driver levels and consistent RS-232 signal performance.
Where to buy MAX202ICSE+ online?
Use the Request a Quote form on this XAIPART page to request the MAX202ICSE+, confirm the required package and delivery format, and obtain current commercial terms. The form is the appropriate route for checking availability, minimum order quantity, lead time, and a volume quotation without relying on a static listing that may become outdated.
What is the price of MAX202ICSE+?
The current commercial price for the MAX202ICSE+ depends on quantity, package suffix, delivery format, and requested sourcing volume. Submit the target MPN through the Request a Quote form on this page for an up-to-date quotation. The form also lets you request production quantities, scheduled deliveries, and alternative packaging without relying on stale catalog pricing.
What is the lead time for MAX202ICSE+?
Lead time for the MAX202ICSE+ depends on current manufacturer inventory, order quantity, and the selected delivery format. Request a quote on this page to obtain the latest production commitment and available schedule. For scheduled equipment builds, state the required quantity, ship-to region, and date on which the components must be available.
Is MAX202ICSE+ in stock?
Stock status changes with manufacturer inventory and order volume, so it should be confirmed through the Request a Quote form on this page. Include the exact MAX202ICSE+ suffix and required packaging quantity in the request. The same inquiry can establish current lead time, scheduled delivery options, and the allocation needed for your build schedule.
What can replace MAX202ICSE+?
A MAX202 16-SOIC variant or the TRS202EID can be evaluated as a drop-in alternative because both families provide 120kbps, 2/2 RS-232 interfacing in comparable packages. Final approval requires matching pin assignments, charge-pump capacitor connections, supply limits, temperature range, and EIA/TIA-232E performance. Do not substitute a functionally similar interface without checking every connection.
Is MAX202ICSE+ the same as MAX202ESE?
The MAX202ICSE+ and MAX202ESE are closely related MAX202 orderable configurations, but they are not automatically interchangeable across every design. Review the ordering table for the exact temperature grade, package dimensions, and delivery format associated with each suffix. Confirm that the existing PCB land pattern and operating requirements match before releasing a substitution.
What is the best Texas Instruments equivalent for MAX202ICSE+?
The TRS202EID is the relevant Texas Instruments cross-reference candidate because the comparison data identifies it against the MAX202ICSE+ and its 120kbps RS-232 function matches the target use case. Treat it as a candidate rather than an unconditional substitute until its 16-SOIC pinout, capacitor requirements, supply range, and temperature limits are confirmed. Use the Request a Quote form to determine availability for the exact suffix.

Impormasyon ng Talumpati sa Engineering for MAX202ICSE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX202ICSE+ for a 5V embedded system that needs a conventional 2/2 RS-232 interface and already uses the MAX202 16-SOIC footprint. Its 120kbps limit, 4.5V to 5.5V supply range, approximately ±5V driver output, and 500mV receiver hysteresis cover common industrial-control, service-console, and legacy-peripheral links. The MAX202ESE, MAX202CSE+, and MAX202ECSE+T remain the primary choices when the exact temperature grade or delivery suffix better matches production requirements. Consider the TRS202EID for a cross-brand redesign, but approve it only after confirming pin assignments, capacitor connections, temperature range, and electrical limits. None of these choices removes the need for connector protection, correct grounding, or charge-pump capacitor placement. For an existing PCB, retaining the specified suffix usually reduces qualification risk compared with changing manufacturers.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX202ESE MAX202CSE+ MAX202ECSE+T TRS202EID
Package 16-SOIC narrow 16-SOIC narrow 16-SOIC narrow 16-SOIC narrow 16-SOIC narrow
Brand Analog Devices Analog Devices Analog Devices Analog Devices Texas Instruments
Transceiver Configuration 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver 2/2 RS-232 transceiver
Maximum Data Rate 120kbps 120kbps 120kbps 120kbps 120kbps
Driver Count 2 2 2 2 2
Receiver Count 2 2 2 2 2

Pangunahing mga Pagkakaiba

  • Established 2/2 RS-232 function in a compact 16-SOIC package (kumpara saTRS202EID)
  • Single-supply operation covers conventional regulated 5V systems (kumpara saMAX202ESE)
  • Receiver hysteresis improves threshold-related noise immunity (kumpara saTRS202EID)

Talaan ng Disenyo

Place the two 0.1µF charge-pump capacitors close to their designated MAX202 pins and use the shortest practical ground return paths. Follow the Analog Devices pinout and capacitor-placement drawing for polarity and spacing. Keep RS-232 driver outputs away from receiver inputs, crystal circuits, and sensitive analog traces to reduce capacitive and inductive coupling during data transmission.

Decouple the 5V supply locally with the capacitance recommended by the manufacturer and provide a low-impedance return to the device ground pin. The charge-pump network creates switching current internally, so an inadequate or remote supply connection can cause driver-level variation during transmit bursts. Verify the design with load changes and check supply ripple at the IC rather than relying only on an upstream measurement.

Do not assume that every MAX202 or TRS202 ordering suffix is interchangeable. Confirm pin assignments, temperature grade, package dimensions, charge-pump capacitor connections, and delivery format against the relevant manufacturer datasheet. Also distinguish logic-ground behavior from RS-232 signal-ground requirements and avoid connecting grounds through long chassis paths that can carry unpredictable currents.

Route the two driver outputs directly toward the connector or protection network and avoid sharing narrow traces with receiver inputs. Place any connector-side protection close to the entry point and provide a suitable chassis-to-logic-ground strategy. Verify radiated emissions and immunity in the final enclosure because cable length, connector construction, and grounding can influence RS-232 performance more than the IC alone.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MAX202 is an industrial interface IC rather than an automotive-qualified device. Formal RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed for the exact ordered suffix with the manufacturer.

Kaugnay na Hanapin

MAX202ICSE+ datasheet MAX202ICSE+ pinout MAX202ICSE+ datasheet pdf MAX202ICSE+ specifications MAX202ICSE+ price MAX202ICSE+ stock Analog Devices MAX202ICSE+ MAX202ICSE+ equivalent MAX202ICSE+ replacement MAX202ICSE+ vs TRS202EID MAX202 16-SOIC pinout MAX202ICSE+ RS-232 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX202ICSE+ MAX202 MAX202ESE MAX202CSE+ MAX202ECSE+T TRS202EID RS-232 EIA-TIA-232E RS-232 transceiver interface IC semiconductor 2/2 transceiver 120kbps 4.5V to 5.5V 500mV receiver hysteresis 16-SOIC QFN family surface mount SMD charge-pump capacitor RS-232 driver RS-232 receiver industrial control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ