MAX202ICSE+ - 120kbps RS-232 Transceiver | Analog Devices
MPN: MAX202ICSE+ ✓ AktifMAX202ICSE+ Ringkasan
An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a RS-232 port. It combines differential voltage drivers and receiver inputs with charge-pump circuitry that develops the positive and negative voltages required by the RS-232 standard. Within the interface hierarchy, the MAX202ICSE+ belongs to the RS-232 transceiver class of interface ICs.
The principal operating specifications include two transmit channels, two receive channels, a maximum data rate of 120kbps, and a 4.5V to 5.5V supply range. Its receivers provide 500mV hysteresis, which improves noise immunity around the RS-232 threshold. The 16-SOIC package supports compact surface-mount construction while exposing the driver outputs, receiver inputs, supply connections, ground reference, and external capacitor connections.
The MAX202 family generates the bipolar voltage levels required by RS-232 from a single 5V supply. External 0.1µF capacitors support the internal charge-pump network, allowing the transceiver to produce approximately ±5V output levels when operated according to the EIA/TIA-232E requirements. The 120kbps capability makes the device suitable for data links beyond low-speed serial-console applications while retaining the familiar RS-232 physical interface.
Typical uses include industrial control systems, data-acquisition equipment, instrumentation, service consoles, and embedded systems that communicate with legacy RS-232 peripherals. The two-driver and two-receiver arrangement supports full-duplex point-to-point communication. It is especially useful where a modern controller has a logic-level UART but the connected equipment still requires an RS-232 electrical interface.
PCB design should keep the charge-pump capacitors close to their designated pins and route the RS-232 driver outputs away from sensitive receiver and logic traces. Decoupling should provide a low-impedance connection between the device supply and ground, while the interface enclosure and cable should handle external electrostatic discharge and surge exposure that is outside the IC itself.
This product page combines the MAX202 electrical specifications, package details, sourcing guidance, comparison parameters, and implementation notes needed to evaluate the MAX202ICSE+ for a new RS-232 interface or a controlled replacement on an existing 16-SOIC design.
Pilihan pengganti yang segera untuk MAX202ICSE+ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MAX202ICSE+ (sama faktor bentuk dan kaki) — berbeza dalam Product Type, Package, Maximum Data Rate, Charge Pump, Transceiver Configuration.
MAX202ESE+
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX202CSE+
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →MAX202ECSE+T
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →TRS202EID
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MAX202ICSE+ Spesifikasi
| Product Type | 2/2 RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Protocol | RS-232 / EIA-TIA-232E |
| Maximum Data Rate | 120kbps |
| Supply Voltage Range | 4.5V to 5.5V |
| RS-232 Output Signal Level | ±5V |
| Receiver Hysteresis | 500mV |
| External Capacitor Value | 0.1µF |
| Gambaran Suhu Operasi | 0°C to 70°C |
| Kemasan | 16-SOIC narrow |
| Kiraan Pin | 16 pins |
| Jenis Pemasangan | Surface mount |
| Supply Configuration | Single supply |
| Transceiver Configuration | 2 transmit and 2 receive channels |
| Tube Packaging | Tube |
Panduan Konfigurasi Pin MAX202ICSE+ 16-soic narrow
Konfigurasi pin untuk MAX202ICSE+ (16-soic narrow pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk MAX202ICSE+.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MAX202ICSE+ patut untuk 6 aplikasis: Industrial Controller RS-232 Port, Data-Acquisition Equipment, Embedded Service Console, Test and Measurement Instrument, Legacy Peripheral Interface, Point-to-Point Serial Link.
Industrial Controller RS-232 Port
The MAX202ICSE+ fits a controller that operates from a 5V logic rail but must communicate with legacy RS-232 equipment. Its two driver outputs and two receiver inputs support full-duplex point-to-point communication, while the 120kbps rating covers moderate-speed command and status traffic. The 4.5V to 5.5V supply range accommodates a regulated 5V system, and the 0°C to 70°C rating suits controlled indoor equipment. Verify the exact controller UART logic levels and connector-side protection requirements before integration.
Disebarkan
Data-Acquisition Equipment
The MAX202ICSE+ can connect a data-acquisition controller to an older instrument through a full-duplex RS-232 link. Two receiver channels allow status or measurement acknowledgments to return while two driver channels transmit commands or collected data. Its 120kbps maximum data rate is suitable for moderate instrument-control bandwidth, and the single 5V supply simplifies system power design. Add connector-level surge protection when the cable leaves an enclosure or connects to industrial equipment.
Disebarkan
Embedded Service Console
The MAX202ICSE+ provides a practical bridge between an embedded processor UART and a PC-style RS-232 service connector. The processor can send configuration commands through one driver while monitoring replies through a receiver, with the second channel available for handshake or status signaling. The device supports 120kbps operation and requires only a single 5V supply, making it suitable for compact service-oriented electronics. Keep the driver output routing away from sensitive processor traces to minimize coupling.
Disebarkan
Test and Measurement Instrument
The MAX202ICSE+ is suited to a bench instrument that must exchange commands, readings, and diagnostic information over RS-232. Its 500mV receiver hysteresis improves recognition of signals in environments containing moderate electrical noise, while the 120kbps data-rate capability supports interactive laboratory communication. The narrow 16-SOIC package preserves board space in compact instruments. Confirm grounding strategy and cable length because the RS-232 interface depends on suitable reference ground and interconnect conditions.
Disebarkan
Legacy Peripheral Interface
The MAX202ICSE+ enables a modern controller to retain compatibility with a legacy peripheral that exposes only a physical RS-232 port. Two transmit and two receive paths support bidirectional command exchange without requiring separate single-ended interface ICs. Its 4.5V to 5.5V operating range works with a regulated 5V controller rail, and its 120kbps limit suits many configuration and status protocols. Validate the peripheral connector pinout and signal polarity during hardware bring-up because DTE and DCE assignments can differ.
Disebarkan
Point-to-Point Serial Link
The MAX202ICSE+ can implement a two-wire full-duplex RS-232 link between two systems with logic-level UARTs. Both ends require the appropriate transceiver orientation, and the shared ground must be connected through the cable. The device provides approximately ±5V signal levels and operates up to 120kbps under the specified EIA/TIA-232E loading conditions. The 16-SOIC package supports compact surface-mount assemblies, while external 0.1µF capacitors must be placed according to the manufacturer layout.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk MAX202ICSE+ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MAX202ESE | MAX202CSE+ | MAX202ECSE+T | TRS202EID |
|---|---|---|---|---|---|
| Package | 16-SOIC narrow | 16-SOIC narrow | 16-SOIC narrow | 16-SOIC narrow | 16-SOIC narrow |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Transceiver Configuration | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver | 2/2 RS-232 transceiver |
| Maximum Data Rate | 120kbps | 120kbps | 120kbps | 120kbps | 120kbps |
| Driver Count | 2 | 2 | 2 | 2 | 2 |
| Receiver Count | 2 | 2 | 2 | 2 | 2 |
Penyeberangsung Jelas
- Established 2/2 RS-232 function in a compact 16-SOIC package (vsTRS202EID)
- Single-supply operation covers conventional regulated 5V systems (vsMAX202ESE)
- Receiver hysteresis improves threshold-related noise immunity (vsTRS202EID)
Catatan Desain
Place the two 0.1µF charge-pump capacitors close to their designated MAX202 pins and use the shortest practical ground return paths. Follow the Analog Devices pinout and capacitor-placement drawing for polarity and spacing. Keep RS-232 driver outputs away from receiver inputs, crystal circuits, and sensitive analog traces to reduce capacitive and inductive coupling during data transmission.
Decouple the 5V supply locally with the capacitance recommended by the manufacturer and provide a low-impedance return to the device ground pin. The charge-pump network creates switching current internally, so an inadequate or remote supply connection can cause driver-level variation during transmit bursts. Verify the design with load changes and check supply ripple at the IC rather than relying only on an upstream measurement.
Do not assume that every MAX202 or TRS202 ordering suffix is interchangeable. Confirm pin assignments, temperature grade, package dimensions, charge-pump capacitor connections, and delivery format against the relevant manufacturer datasheet. Also distinguish logic-ground behavior from RS-232 signal-ground requirements and avoid connecting grounds through long chassis paths that can carry unpredictable currents.
Route the two driver outputs directly toward the connector or protection network and avoid sharing narrow traces with receiver inputs. Place any connector-side protection close to the entry point and provide a suitable chassis-to-logic-ground strategy. Verify radiated emissions and immunity in the final enclosure because cable length, connector construction, and grounding can influence RS-232 performance more than the IC alone.
Maklumat Kesediaan
The MAX202 is an industrial interface IC rather than an automotive-qualified device. Formal RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed for the exact ordered suffix with the manufacturer.