Texas Instruments

MAX211IDBG4 - 5V Multichannel RS-232 Transceiver | Texas Instruments

MPN: MAX211IDBG4 ✓ Nakahanda
5 V Vdss 1 µA typical Id 28-pin SSOP Package
MOQ: 1 |

MAX211IDBG4 Ulas

The Texas Instruments MAX211IDBG4 is a 5 V multichannel RS-232 line driver/receiver with four drivers, five receivers, operation up to 120 kbit/s, and ±15 kV human-body-model ESD protection, housed in a 28-pin SSOP package. The device also includes a dual charge-pump circuit, allowing the RS-232 transmit outputs to generate the required negative and positive voltage levels from a single supply.

An RS-232 transceiver is an interface integrated circuit that combines logic-level driver and receiver functions with the voltage conversion required by the RS-232 standard. Within the signal-chain hierarchy, the MAX211IDBG4 belongs to the RS-232 interface IC class, connecting low-voltage digital systems to external serial ports. It is designed for equipment requiring multiple serial channels while conserving board space through a narrow surface-mount package.

The MAX211IDBG4 operates from a 5 V supply and contains four RS-232 drivers and five receivers. Its maximum signaling rate is 120 kbit/s, making it appropriate for legacy serial-console, industrial-control, point-of-sale, and embedded-system connections. The listed ±15 kV HBM ESD protection applies to the serial-port connection pins, including ground, while shutdown operation reduces supply current to a typical 1 µA.

Its dual charge-pump circuit generates the bipolar voltage levels used by RS-232 drivers from the 5 V supply. The device is specified to meet or exceed TIA/EIA-232-F and ITU V.28 requirements. This combination of integrated level translation, four transmit channels, five receive channels, and low-power shutdown makes the part useful where multiple serial interfaces must coexist on one board.

Typical applications include multiport serial adapters, industrial controller interfaces, test equipment, POS terminals, and embedded debug systems. The five receivers also permit one incoming line to be monitored while four other channels are active. Designers should account for the charge-pump capacitors and ensure that signal routing, grounding, and connector protection preserve the specified ESD and communication performance.

For a robust layout, place the charge-pump capacitors and interface bypass capacitor close to their associated pins, route transceiver outputs directly toward the connector, and maintain a low-impedance ground return. The 28-pin SSOP footprint reduces board area, but careful fan-out and signal-return management remain important because RS-232 uses single-ended signaling over relatively slow, long cable links.

This page combines the device's principal electrical characteristics, verified source links, interface-design guidance, and selection criteria for engineers evaluating the MAX211IDBG4 in multichannel RS-232 systems.

Mga alternatibo na pwedeng ilagay na MAX211IDBG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX211IDBG4 (parehas na form factor at footprint) — pagkakaiba sa Product Type, Number of Drivers, Number of Receivers, Operating Temperature Range, Package.

Texas Instruments
Product Type: RS-232 Line Driver/Receiver (Transceiver)
Number of Drivers: 4
Number of Receivers: 5
Ikabit sa MAX211IDBG4 →
Texas Instruments
Product Type: RS-232 Line Driver/Receiver (Transceiver)
Number of Drivers: 4
Number of Receivers: 5
Ikabit sa MAX211IDBG4 →
Texas Instruments
Product Type: RS-232 line driver and receiver
Number of Drivers: 4
Number of Receivers: 5
Ikabit sa MAX211IDBG4 →

MAX211IDBRG4

✅ Drop-In
Texas Instruments
📦 28-SSOP
RS-232 line driver and receiver · 5 V · 120 kbit/s · 4 · 5 · ±9 V · ±15 kV using the Human-Body Model · −40°C to +85°C

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX211IDBG4 Mga Spesipikasyon

Product Type 1 multichannel RS-232 line driver/receiver
Volte ng Pagbibigay 5 V
Number of Drivers 4 channels
Number of Receivers 5 channels
Maximum Data Rate 120 kbit/s
ESD Protection ±15 kV using the Human-Body Model
ESD Protected Connections 9 serial-port pins including ground
RS-232 Compliance Meets or exceeds TIA/EIA-232-F
ITU Standard Meets or exceeds ITU V.28
Charge-Pump Circuit 1 dual charge-pump circuit
Shutdown Supply Current 1 µA typical
Package Type 28-pin SSOP
Package Width 5.30 mm
Terminal Count 28 terminals
Style ng Pagpapasok Surface mount
Temperature Grade Industrial

Gabay sa Pin Configuration ng MAX211IDBG4 5.30 mm

Pin configuration para sa MAX211IDBG4 (5.30 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 5.30 mm package para sa MAX211IDBG4

Wala ng detalyadong pinout data na magagamit para sa MAX211IDBG4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX211IDBG4 ay nararapat para sa 6 aplikasyons: Industrial Multiport Serial Interface, POS Terminal and Peripheral Hub, Embedded Serial Console, Test and Measurement Equipment, Multiport Communication Adapter, RS-232 Port Expansion.

🏭

Industrial Multiport Serial Interface

The MAX211IDBG4 fits industrial controller and data-acquisition equipment that must expose several RS-232 ports from a limited board area. Its four drivers and five receivers support four outbound channels plus five incoming or monitoring lines, while the 28-pin SSOP package preserves routing space around dense control electronics. Operation from a 5 V supply and rates up to 120 kbit/s suit legacy equipment, service consoles, and programmable controllers. The ±15 kV HBM protection on serial-port connections improves robustness at exposed interfaces, although the final enclosure, cable routing, ground reference, and surge strategy must also be engineered for the installation environment.

🏭

POS Terminal and Peripheral Hub

The MAX211IDBG4 can support point-of-sale terminals, receipt printers, scanners, and service interfaces that use several RS-232 connections. Four transmitter channels allow the host to command multiple peripherals, while five receivers permit acknowledgement, status, or incoming-data lines to be monitored simultaneously. The 5 V architecture integrates the charge-pump needed for RS-232 voltage levels, and the 120 kbit/s maximum rate covers common legacy peripheral baud rates. Designers should keep each cable route away from fast digital signals, provide a continuous ground reference, and place the required charge-pump capacitors close to the device for dependable driver operation.

🔧

Embedded Serial Console

The MAX211IDBG4 is useful in embedded systems that retain an RS-232 service or diagnostics interface alongside several other serial connections. The four drivers and five receivers provide flexibility for command, response, reset, and status lines without requiring a separate transceiver for every channel. Its typical shutdown current of 1 µA helps conserve power when the interface is inactive, although system shutdown sequencing must keep the 5 V rail valid while the device is operating. The narrow 28-pin SSOP package is practical for compact controller boards, but careful fan-out, capacitor placement, and return-path design are necessary to prevent transient noise from coupling into adjacent digital or analog circuits.

🔧

Test and Measurement Equipment

The MAX211IDBG4 can serve as the host-side RS-232 interface in programmable test equipment, fixture controllers, and laboratory adapters. Multiple transmit channels support separate commands or control signals, and the five receivers can monitor equipment responses, interlocks, and status lines. The 120 kbit/s rate is appropriate for many legacy RS-232 instruments, while the integrated ESD protection strengthens the connector-facing portion of the design. Instrument engineers should still evaluate common-mode voltage, ground offsets, cable capacitance, and isolation needs; the transceiver regulates RS-232 levels but does not itself provide galvanic isolation or protection for every externally applied condition.

🌐

Multiport Communication Adapter

The MAX211IDBG4 is appropriate for compact adapters that translate a host connector into several RS-232 ports. Four drivers can feed four downstream devices, and five receivers can accept commands or status signals from multiple sources. Its 5 V-only supply arrangement simplifies power design, and the SSOP-28 package enables a narrow adapter board. For reliable operation, route driver outputs and receiver inputs away from switching nodes, preserve the RS-232 ground return, and install the charge-pump and bypass capacitors according to the manufacturer layout guidance. If a new design requires data rates above 120 kbit/s, longer unrepeated cable runs, or modern high-speed differential links, a different interface technology should be evaluated.

🔧

RS-232 Port Expansion

The MAX211IDBG4 can expand a controller's limited serial resources by adding four RS-232 transmit channels and five receive channels in one package. This is useful in peripheral controllers, maintenance equipment, and legacy automation platforms where several devices must be connected or monitored. The 120 kbit/s operating limit and TIA/EIA-232-F and ITU V.28 compatibility make it suited to established RS-232 ecosystems, while ±15 kV HBM protection helps reduce ESD risk at connected ports. The extra receiver channel supports handshake or status monitoring, but software must map each signal correctly because sharing compatible functions does not make every implementation automatically protocol-compatible.

What is the MAX211IDBG4?
The MAX211IDBG4 is a Texas Instruments 5 V multichannel RS-232 transceiver containing four line drivers, five line receivers, and a dual charge-pump circuit. According to the MAX211IDBG4 datasheet, it operates up to 120 kbit/s and provides ±15 kV HBM ESD protection on the serial-port connection pins. The device is intended for systems that need several RS-232 channels in a compact 28-pin SSOP package.
What are the key specifications of MAX211IDBG4 that engineers should know?
The MAX211IDBG4 combines four RS-232 drivers, five receivers, a 5 V supply, and a maximum data rate of 120 kbit/s. According to the MAX211IDBG4 datasheet, the serial-port pins provide ±15 kV HBM ESD protection and the device meets or exceeds TIA/EIA-232-F and ITU V.28 requirements. A typical shutdown supply current of 1 µA also makes it useful in power-managed peripheral designs.
What is the operating voltage of MAX211IDBG4?
The MAX211IDBG4 operates from a 5 V supply. According to the MAX211IDBG4 datasheet, this single supply feeds both the transceiver circuitry and the internal dual charge-pump circuit that develops the bipolar voltage levels required by the RS-232 drivers. The charge-pump capacitors specified by the manufacturer must be connected correctly for proper driver operation.
How many RS-232 drivers and receivers does MAX211IDBG4 contain?
The MAX211IDBG4 contains four RS-232 line drivers and five RS-232 line receivers. According to the MAX211IDBG4 datasheet, this arrangement supports four outbound serial channels while allowing five inbound channels to be monitored. The additional receiver can be useful for handshake, status, or incoming-data lines in multiport interface designs.
What is the maximum data rate of MAX211IDBG4?
The MAX211IDBG4 supports RS-232 operation up to 120 kbit/s. According to the MAX211IDBG4 datasheet, the four drivers and five receivers are integrated with a dual charge-pump circuit in one 5 V package. Cable length, capacitance, loading, grounding, and signal integrity must also be evaluated because the maximum IC data rate does not guarantee that every cable or baud-rate combination will operate reliably.
Where can I download the MAX211IDBG4 datasheet PDF?
The MAX211IDBG4 datasheet PDF can be accessed through the listed manufacturer-document aggregation page and through the distributor and component-information links on this page. According to the MAX211IDBG4 documentation, it is a 5 V multichannel RS-232 line driver/receiver with four drivers, five receivers, ±15 kV HBM ESD protection, and operation to 120 kbit/s. Use the pin-description and electrical-characteristics tables for final design verification.
Where can I find the MAX211IDBG4 pinout?
The MAX211IDBG4 pinout is documented in the manufacturer datasheet under the 28-pin SSOP pin-description and connection tables. The verified package information identifies 28 terminals, but the individual terminal names are not reproduced in the source excerpts, so consult the datasheet before assigning PCB nets. Pay particular attention to charge-pump capacitor pins, shutdown control, supply connections, driver outputs, and receiver inputs.
Is MAX211IDBG4 suitable for industrial applications?
The MAX211IDBG4 is identified as an industrial-temperature-grade interface IC and is designed to meet or exceed TIA/EIA-232-F and ITU V.28 requirements. According to the MAX211IDBG4 datasheet, it provides ±15 kV HBM ESD protection on serial-port connection pins. Industrial suitability still depends on the complete system's voltage, temperature, grounding, surge, and isolation requirements.
Where can I buy MAX211IDBG4 online?
The MAX211IDBG4 can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for current commercial terms, availability, order quantities, and lead-time confirmation. The target device is a Texas Instruments 5 V RS-232 transceiver in a 28-pin SSOP package, so quote requests should use the complete manufacturer part number MAX211IDBG4.
What is the price of MAX211IDBG4?
Current commercial terms for the MAX211IDBG4 are handled through the Request a Quote form on this page. The part is a 5 V, four-driver and five-receiver RS-232 interface IC rated for operation up to 120 kbit/s. Submit the exact suffix MAX211IDBG4 when requesting a quotation so that the 28-pin SSOP configuration is correctly identified.
What is the lead time for MAX211IDBG4?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. The MAX211IDBG4 is specified as a 5 V multichannel RS-232 transceiver with four drivers, five receivers, and a 28-pin SSOP package. Quote confirmation should reflect the exact package suffix, required quantity, production schedule, and any date-code or traceability requirements.
Is MAX211IDBG4 in stock?
Use the Request a Quote form on this page for the current stock position of MAX211IDBG4. Inventory levels can change by quantity, date code, and fulfillment method, so a general listing is not a guarantee of allocation. The quote request should identify the required quantity and whether unopened, date-coded, or traceable production is mandatory.
What can replace MAX211IDBG4?
A valid direct replacement must use the same 28-pin SSOP footprint and preserve the pin functions and critical electrical characteristics of the MAX211IDBG4. The verified cross-reference results do not establish that a candidate is both pin-to-pin compatible and electrically equivalent, so no drop-in replacement is asserted here. Use the Request a Quote form to discuss an exact-match source, and require manufacturer pinout and specification verification before substitution.
Is MAX211IDBG4 the same as MAX213IDBR?
The MAX211IDBG4 and MAX213IDBR are not automatically interchangeable. The MAX211IDBG4 has four drivers and five receivers, whereas a cross-reference listing names MAX213IDBR as a comparison candidate without confirming identical receiver count, pin functions, electrical limits, or package dimensions. Treat MAX213IDBR as a redesign candidate until the manufacturer datasheets confirm pin-to-pin compatibility and every critical parameter.
When should I choose MAX211IDBG4 for an RS-232 interface?
Choose the MAX211IDBG4 when a compact design needs four transmit channels, five receive channels, and operation from a 5 V supply. According to the MAX211IDBG4 datasheet, the device supports rates up to 120 kbit/s and includes ±15 kV HBM ESD protection. It is particularly suitable for multichannel industrial, console, POS, and legacy serial interfaces where shutdown current of 1 µA typical is useful.

Impormasyon ng Talumpati sa Engineering for MAX211IDBG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX211IDBG4 when the design needs four RS-232 transmit channels, five receive channels, a single 5 V supply, and operation at up to 120 kbit/s. It is a strong fit for industrial controllers, POS equipment, service consoles, legacy test instruments, and compact port adapters. Its integrated dual charge pump, ±15 kV HBM protection, and TIA/EIA-232-F and ITU V.28 compatibility simplify implementation of conventional RS-232 ports.

MAX213IDBR appears in comparison listings, but it should not be treated as a drop-in replacement without comparing its receiver count, pin functions, package geometry, electrical limits, and supply requirements. No other candidate is established as pin-to-pin compatible in the verified cross-reference information, so PCB reuse cannot be promised. Consider a different interface family when the system requires operation above 120 kbit/s, galvanic isolation, modern differential signaling, or protection against severe industrial surge events.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 28-pin SSOP
Brand Texas Instruments
Product Type Multichannel RS-232 line driver/receiver
Supply Voltage 5 V
Number of Drivers 4 channels
Number of Receivers 5 channels
Maximum Data Rate 120 kbit/s
ESD Protection ±15 kV HBM
Shutdown Supply Current 1 µA typical
RS-232 Standards TIA/EIA-232-F and ITU V.28

Pangunahing mga Pagkakaiba

  • Five receivers provide more inbound channel capacity (kumpara saMAX213IDBR)
  • Five-volt integration simplifies dual-rail interface design (kumpara saMAX213IDBR)
  • Specified connector-side ESD protection (kumpara saMAX213IDBR)

Talaan ng Disenyo

Place the charge-pump capacitors and supply bypass capacitor close to their designated MAX211IDBG4 pins, and minimize loop area around the switching charge-pump nodes. Route each charge-pump connection directly to its capacitor without detours through protected or sensitive areas. Keep the interface ground and cable-return path continuous to the connector, because an interrupted ground reference can degrade RS-232 noise immunity even when the data and control wiring are correct.

Separate RS-232 driver outputs from receiver inputs and nearby sensitive circuitry wherever the board area permits. Driver outputs undergo high-voltage transitions generated by the charge pump, so their routing can couple noise into adjacent signals. Use a continuous ground plane, avoid splitting the ground beneath the transceiver, and maintain practical clearance between external cable-side nets and low-level digital or analog traces.

Do not treat the ±15 kV HBM rating as protection for every industrial surge or cable condition. External cable transients, long ground offsets, and improper connector grounding may exceed the intended application environment. Evaluate the complete signal path, add appropriate surge protection where required, and confirm that the 5 V supply remains within its operating limits during startup, shutdown, and load transients.

RS-232 signaling is single-ended, so receiver inputs depend on a stable reference to the interface ground. Avoid routing a receiver input beside a driver output or switching regulator node, and terminate unused inputs in the manner specified by the manufacturer. For long cables or high baud rates, evaluate capacitance, attenuation, reflections, and common-mode noise; the IC's 120 kbit/s limit does not guarantee reliable communication over every cable length.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device is identified as an industrial-grade RS-232 interface IC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the verified source excerpts.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX211IDBG4 datasheet MAX211IDBG4 pinout MAX211IDBG4 datasheet pdf MAX211IDBG4 specifications MAX211IDBG4 SSOP-28 MAX211IDBG4 RS-232 transceiver MAX211IDBG4 equivalent MAX211IDBG4 replacement MAX211IDBG4 price MAX211IDBG4 stock Texas Instruments MAX211IDBG4 MAX211IDBG4 vs MAX213IDBR MAX211IDBG4 industrial interface MAX211IDBG4 120 kbit/s

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments MAX211IDBG4 MAX213IDBR RS-232 RS-232 transceiver line driver line receiver interface IC serial interface dual charge-pump circuit TIA/EIA-232-F ITU V.28 ±15 kV HBM ESD protection 120 kbit/s 5 V power supply 28-pin SSOP SSOP package family surface-mount package semiconductor industrial control point-of-sale equipment test and measurement equipment shutdown current RS-232 port expansion
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ