Analog Devices

MAX232AMJE/883B - Military RS-232 Transceiver | Analog Devices

MPN: MAX232AMJE/883B ✓ Nakahanda
5 V Vdss 16-CDIP, 0.300-inch (7.62 mm) row spacing Package
MOQ: 1 |

MAX232AMJE/883B Ulas

Analog Devices MAX232AMJE/883B is a +5 V-powered, dual-driver and dual-receiver RS-232 transceiver designed for EIA/TIA-232E and V.28/V.24 communications interfaces. It provides two transmit channels and two receive channels in a 16-lead CDIP package rated for military temperature operation from -55°C to +125°C.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level outputs. Within the interface hierarchy, the MAX232 belongs to the line-driver and line-receiver category, supports bidirectional serial communication, and eliminates the need for a separate ±12 V supply when only a single +5 V rail is available.

The MAX232AMJE/883B combines two drivers and two receivers in one 16-CDIP package. Its +5 V operating supply, through-hole construction, and 0.300-inch, 7.62 mm row spacing suit industrial, telecommunications, instrumentation, and embedded control equipment where a rugged ceramic dual-inline package is preferred. The device supports both point-to-point and multipoint RS-232 communication arrangements.

Its mixed-signal operating characteristics determine several practical design constraints. RS-232 drivers use charge-pump circuitry to generate positive and negative line voltages from the +5 V supply, while the receivers detect valid bipolar signals. External bypass and charge-pump capacitors must be connected close to their designated pins, and long cables require attention to capacitive loading, common-mode voltage, ground continuity, and protection from electrostatic discharge.

Typical uses include industrial serial consoles, data acquisition systems, test equipment, remote-control interfaces, and legacy peripheral connections. The device is especially relevant where equipment retains an RS-232 port but has moved from ±12 V or ±15 V supplies to a +5 V logic environment. Its military temperature grade also supports equipment intended for extended environmental ranges.

For PCB layout, route RS-232 driver and receiver traces as differential pairs where practical, keep the external capacitors compact, and provide adequate ground return current. Protection networks should be placed where cables enter the assembly rather than directly beside the IC. Confirm capacitor type, voltage rating, pinout, and loopback behavior against the manufacturer datasheet before releasing a production layout.

This product page combines the manufacturer interface description with practical procurement and engineering guidance, including package information, qualification details, design notes, and a focused drop-in comparison. It is intended to help engineers determine whether the MAX232AMJE/883B fits the electrical, mechanical, environmental, and sourcing requirements of a specific RS-232 design.

Mga alternatibo na pwedeng ilagay na MAX232AMJE/883B — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MAX232AEPE+

✅ Drop-In
📦 16-CDIP
Both use a 16-CDIP package, but MAX232AEPE+ is the + commercial-temperature option versus MAX232AMJE/883B's -55°C to +125°C military grade; the temperature-range difference is 70°C at the lower limit and 0°C at the upper limit.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX232AMJE/883

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-CDIP
Same MAX232AMJE 16-CDIP device family and electrical function; the /883 ordering code lacks the explicit B revision designation, making qualification documentation the principal unresolved difference.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX232AMJE/883A

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-CDIP
Same MAX232AMJE family and 16-CDIP footprint, with the A revision designation differing from the B target; qualification revision and production status must be checked before substitution.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX232AMJE/883B Mga Spesipikasyon

Product Type Dual RS-232 driver and dual receiver transceiver
Driver Count 2 drivers
Receiver Count 2 receivers
Volte ng Pagbibigay 5 V
Interface Standard EIA/TIA-232E and V.28/V.24
Packhaging 16-CDIP, 0.300-inch (7.62 mm) row spacing
Terminal Count 16 terminals
Style ng Pagpapasok Through-hole
Temperature na Operasyon -55°C to +125°C
Temperature Grade Military
Packing Method Tube

Gabay sa Pin Configuration ng MAX232AMJE/883B 16-cdip, 0.300-inch (7.62 mm) row spacing

Pin configuration para sa MAX232AMJE/883B (16-cdip, 0.300-inch (7.62 mm) row spacing package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-cdip, 0.300-inch (7.62 mm) row spacing package para sa MAX232AMJE/883B

Wala ng detalyadong pinout data na magagamit para sa MAX232AMJE/883B.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX232AMJE/883B ay nararapat para sa 6 aplikasyons: Industrial Serial Console, Telecommunications Equipment Interface, Data Acquisition System, Legacy Peripheral Connectivity, Embedded Control and Monitoring, Test and Measurement Instrumentation.

🏭

Industrial Serial Console

The MAX232AMJE/883B is appropriate for an industrial console that converts +5 V UART logic into RS-232 levels and receives two remote command channels. Its two-driver and two-receiver arrangement supports bidirectional point-to-point links, while the -55°C to +125°C operating range covers equipment intended for extended industrial environments. The 16-CDIP package is practical for through-hole industrial controllers and serviceable control boards. Place the manufacturer's prescribed charge-pump capacitors near the IC, route driver and receiver traces away from switching nodes, and use protected connector-side circuits for cables entering the enclosure.

🌐

Telecommunications Equipment Interface

The MAX232AMJE/883B can connect legacy telecommunications control electronics to RS-232 service ports using only a +5 V rail. Two driver channels support separate transmit paths, and two receiver channels support status or command inputs. Its military temperature operation and 16-CDIP construction suit rugged equipment platforms where environmental range and through-hole serviceability matter. The implementation should preserve the MAX232 family charge-pump network, provide a low-impedance ground reference, and protect connector inputs against surge and electrostatic discharge transients common on external communication lines.

📊

Data Acquisition System

The MAX232AMJE/883B is useful in laboratory and industrial data-acquisition equipment that must exchange commands and measurements with RS-232 instruments. The +5 V supply simplifies system power design, and the two transmit and two receive channels allow one driver-receiver pair for control traffic and another for data or status. The device's -55°C to +125°C range supports wide environmental deployments, while the CDIP package simplifies insertion into rugged instrument boards. Keep external capacitors short, provide a continuous signal-ground return, and isolate the RS-232 cable entry to prevent transients from reaching sensitive acquisition circuitry.

🔧

Legacy Peripheral Connectivity

The MAX232AMJE/883B provides a practical bridge between modern +5 V embedded logic and legacy equipment using RS-232. Two driver outputs and two receiver inputs are sufficient for common control, status, and handshake arrangements without requiring separate line-driver ICs. Its military-temperature grade and through-hole package are advantageous for long-lived industrial, transportation, and medical-support equipment. Validate input levels and driver polarity for each legacy peripheral, then protect the cable connection with appropriately rated components. Do not substitute a surface-mount package unless the PCB is physically redesigned.

🖥️

Embedded Control and Monitoring

The MAX232AMJE/883B fits embedded controllers that need a legacy RS-232 service port in addition to a primary communications interface. Operating from +5 V allows the transceiver to share a regulated logic rail, and its 16-CDIP footprint supports ruggedized controller boards assembled with through-hole components. Two RS-232 channels can carry commands and diagnostic information between a remote terminal and a central controller. Use the manufacturer's pin-description table to assign inputs and outputs, maintain short capacitor connections, and provide a solid chassis-to-board ground strategy for reliable operation with cable-mounted equipment.

🔬

Test and Measurement Instrumentation

The MAX232AMJE/883B can add a conventional RS-232 control port to test and measurement instruments that retain legacy computer interfaces. The +5 V-powered transceiver reduces the need for older ±12 V interface rails, and the dual-channel arrangement supports separate command and response connections. The -55°C to +125°C rating is suitable for broad industrial and mobile test platforms, while the CDIP package permits straightforward repair and retrofit. Route the cable-side traces as controlled pairs, minimize stubs, and place protection at the connector to preserve receiver reliability under external cable transients.

What is the MAX232AMJE/883B?
The MAX232AMJE/883B is a +5 V-powered RS-232 interface IC containing two line drivers and two line receivers. According to the Analog Devices MAX232 datasheet, the MAX220-MAX249 family is intended for EIA/TIA-232E and V.28/V.24 interfaces, particularly equipment that cannot provide separate ±12 V supplies. The device is packaged in a military-temperature 16-CDIP.
What are the key specifications of MAX232AMJE/883B that engineers should know?
The MAX232AMJE/883B provides two RS-232 drivers, two receivers, a +5 V supply, and a 16-CDIP package. Its documented operating-temperature range is -55°C to +125°C, and its package has 0.300-inch, 7.62 mm lead spacing. The manufacturer describes the MAX220-MAX249 family for EIA/TIA-232E and V.28/V.24 communications interfaces.
Where can I download the MAX232AMJE/883B datasheet PDF?
The official MAX232 product page is the best starting point for the manufacturer datasheet and device documentation. The MAX232AMJE/883B is a qualified member of the MAX220-MAX249 family, so its family datasheet covers the electrical characteristics, charge-pump circuit, pin description, and typical interface application. Use the MAX232 product page rather than relying on an unattributed mirror when establishing production design parameters.
Where can I find the MAX232AMJE/883B pinout?
The MAX232AMJE/883B pinout is defined by the 16-lead CDIP pin-description table in the Analog Devices MAX232 datasheet. Assign PCB nets using that table because the package includes supply, ground, driver outputs, receiver inputs, receiver outputs, and charge-pump capacitor connections. Confirm pin numbering against the physical orientation marking and the manufacturer document before drilling or routing the board.
What package does MAX232AMJE/883B use?
The MAX232AMJE/883B uses a 16-lead CDIP package with through-hole mounting, 0.300-inch row spacing, and a 7.62 mm lead pitch. Distributor product records also identify tube packing and military temperature grade. A drop-in replacement must therefore use the same 16-CDIP footprint, lead dimensions, and pin functions rather than merely offering equivalent RS-232 functions.
What is the operating temperature range of MAX232AMJE/883B?
The MAX232AMJE/883B operates from -55°C to +125°C. Its military-grade temperature characterization makes it suitable for industrial, telecommunications, instrumentation, and embedded equipment expected to operate across an extended temperature range. Validate the complete power-supply, capacitor, and interface system against that range rather than relying only on the IC junction rating.
Can MAX232AEPE+ replace MAX232AMJE/883B?
The MAX232AEPE+ can be considered as a same-family, 16-CDIP alternative, but it should not be treated as an unconditional substitution. The MAX232AMJE/883B is specified for military temperature operation from -55°C to +125°C and tube packing, while the alternative's environmental grade and procurement configuration may differ. Verify the pin functions, electrical limits, qualification requirements, and package dimensions before release.
What is the best drop-in replacement for MAX232AMJE/883B?
A true drop-in replacement for the MAX232AMJE/883B must use a 16-CDIP footprint, provide two drivers and two receivers, operate from +5 V, and preserve the RS-232 pin functions. The MAX232AEPE+ is the closest identified same-family candidate because both are listed as 16-CDIP devices. Final approval depends on matching temperature grade, lifecycle status, electrical limits, and military qualification requirements.
Is MAX232AMJE/883B suitable for industrial equipment?
The MAX232AMJE/883B is suitable for industrial RS-232 interfaces that require two drivers, two receivers, +5 V operation, and an extended -55°C to +125°C temperature range. Its 16-CDIP construction also suits repairable or higher-reliability through-hole assemblies. The surrounding design still needs suitable bypass capacitors, controlled RS-232 routing, robust grounding, and input protection for industrial cable transients.
Where can I buy MAX232AMJE/883B and check current availability?
Use the Request a Quote form on this page to request MAX232AMJE/883B pricing, stock confirmation, and current lead time. The exact ordering code includes the /883B qualification suffix and CDIP tube packaging, so confirm that the quoted manufacturer part number exactly matches MAX232AMJE/883B. Request the assembly date, packaging quantity, traceability information, and any lot-specific documentation with the quotation.
What is the price of MAX232AMJE/883B?
Current pricing for MAX232AMJE/883B is handled through the Request a Quote form on this page. A valid comparison should use the exact /883B ordering suffix, CDIP package, tube packing, and required quantity. Ask the supplier to confirm whether the quoted configuration is an active manufacturer product or a traceable remaining-lifecycle supply before comparing commercial terms.
What is the lead time for MAX232AMJE/883B?
The current lead time for MAX232AMJE/883B should be confirmed through the Request a Quote form on this page. Include the required annual and build quantities, tube-packaging preference, acceptable date code, and traceability requirements in the request. These factors determine a more useful delivery commitment than a generic stock quantity alone.
Is MAX232AMJE/883B in stock?
Current stock status for the exact MAX232AMJE/883B ordering code should be confirmed through the Request a Quote form on this page. Request confirmation of the manufacturer part number, package, tube quantity, date code, and ship date. For long-lived industrial or military programs, also request lifecycle and traceability statements rather than relying on a transient inventory count.
What can replace MAX232AMJE/883B?
The MAX232AEPE+ is a candidate replacement because it shares the MAX232 family and 16-CDIP package format. It is only a valid drop-in choice after confirming pin compatibility, electrical characteristics, operating-temperature grade, qualification, and package dimensions. The MAX232AMJE/883B’s -55°C to +125°C military-temperature specification means an otherwise similar commercial-temperature part may not be acceptable.
Is MAX232AMJE/883B the same as MAX3232CSE+?
No. The MAX232AMJE/883B is a 16-CDIP MAX232-family device intended for +5 V EIA/TIA-232E and V.28/V.24 interfaces, while the MAX3232CSE+ belongs to the MAX3232 family and is listed in a 16-pin SOIC package. Their functions overlap, but their packages and device details are not sufficient to establish a no-change PCB substitution.
How should MAX232AMJE/883B be decoupled and laid out?
Place the charge-pump and bypass capacitors close to their associated MAX232 pins, using the values and tolerances specified by the Analog Devices datasheet. Keep the high-current driver return paths compact and route the RS-232 cable-side interface away from sensitive logic. Where protection is required, place it near the connector and confirm that its capacitance does not impair receiver operation or signal integrity.

Impormasyon ng Talumpati sa Engineering for MAX232AMJE/883B — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX232AMJE/883B when the design requires a +5 V RS-232 interface with two drivers, two receivers, a 16-CDIP footprint, and operation across -55°C to +125°C. Its military temperature grade and through-hole package are particularly appropriate for rugged industrial, telecommunications, instrumentation, and long-lived control systems. Choose MAX232AEPE+ when the same MAX232 family and 16-CDIP mechanics are needed but its environmental grade satisfies the application. MAX232AMJE/883 and MAX232AMJE/883A can be evaluated for earlier qualification revisions, provided engineering confirms that the revision, electrical limits, lifecycle status, and traceability match the program requirements. Do not select MAX3232CSE+ or MAX3232CUE+ as drop-in parts because their surface-mount packages require a different PCB footprint. For a new compact design, those surface-mount devices may be better options, but they are not mechanical substitutes for MAX232AMJE/883B.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX232AEPE+ MAX232AMJE/883 MAX232AMJE/883A
Package 16-CDIP, 0.300-inch (7.62 mm) row spacing 16-CDIP - same package family 16-CDIP - same package family 16-CDIP - same package family
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter Count 2 drivers 2 drivers 2 drivers 2 drivers
Receiver Count 2 receivers 2 receivers 2 receivers 2 receivers
Supply Voltage 5 V 5 V 5 V 5 V
Interface Family MAX232, +5 V RS-232 MAX232, +5 V RS-232 MAX232, +5 V RS-232 MAX232, +5 V RS-232
Supported Communications Standards EIA/TIA-232E and V.28/V.24 EIA/TIA-232E and V.28/V.24 family support EIA/TIA-232E and V.28/V.24 family support EIA/TIA-232E and V.28/V.24 family support
Packing Method Tube Tube Tube Tube
Mounting Style Through-hole Through-hole Through-hole Through-hole
Qualification Designation MAX232AMJE/883B MAX232AEPE+ MAX232AMJE/883 MAX232AMJE/883A

Pangunahing mga Pagkakaiba

  • Broader documented environmental range (kumpara saMAX232AEPE+)
  • Exact qualified ordering revision (kumpara saMAX232AMJE/883A)
  • Two-channel transceiver integration (kumpara saMAX232AMJE/883)

Talaan ng Disenyo

Use the Analog Devices MAX232 datasheet pin-description and charge-pump capacitor tables when assigning the 16-CDIP nets. Place the external capacitors close to their associated pins, use the shortest practical ground returns, and avoid routing RS-232 signals beneath or immediately beside the charge-pump circuitry. This minimizes switching-current coupling into the receive path and helps the transmitter and receiver retain predictable behavior in a two-channel interface.

Decouple the +5 V supply locally and verify the capacitor voltage rating against the charge-pump voltage conditions specified by the manufacturer. Keep the charge-pump traces compact because their switching current can create ground bounce. A single-point ground strategy near the IC, combined with a continuous chassis and signal-ground return to the connector, gives cable-connected equipment a lower-resistance reference than a fragmented board plane.

Do not treat every MAX232-family device as a mechanical substitute: the target uses a 16-CDIP footprint, while several MAX232 and MAX3232 products use SOIC or TSSOP packages. A proposed replacement must match the footprint, pin functions, electrical limits, temperature grade, and qualification document. For new compact designs, MAX3232CSE+ or MAX3232CUE+ may be appropriate functional choices, but they require a different PCB footprint and should not be called drop-in replacements for this target.

Protect external RS-232 connectors from electrostatic discharge and cable-borne transients. Place protection components near the connector boundary, and account for their capacitance and leakage when selecting them. Avoid long unprotected traces, especially on receiver inputs, and confirm the complete channel with a system-level loopback test across the intended cable length and environmental conditions.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device is identified as military temperature grade, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was established.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX232AMJE/883B MAX232AMJE/883B datasheet MAX232AMJE/883B datasheet pdf MAX232AMJE/883B pinout MAX232AMJE/883B replacement MAX232AMJE/883B equivalent MAX232AMJE/883B cross reference Analog Devices MAX232AMJE/883B MAX232AMJE/883B 16-CDIP MAX232AMJE/883B military RS-232 MAX232AMJE/883B industrial interface MAX232AMJE/883B price

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX232AMJE/883B MAX232AEPE+ MAX232AMJE/883 MAX232AMJE/883A MAX232 MAX3232CSE+ MAX3232CUE+ RS-232 transceiver RS-232 line driver RS-232 line receiver EIA/TIA-232E V.28 V.24 dual-driver dual-receiver interface interface IC serial communication IC semiconductor 16-CDIP ceramic dual-inline package through-hole surface-mount device charge-pump capacitor military temperature grade +5 V power supply industrial automation telecommunications equipment
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ