Analog Devices

MAX310EPE+ - 8:1 CMOS RF Video Multiplexer | Analog Devices

MPN: MAX310EPE+ ✓ Nakahanda
PDIP-16 Package
MOQ: 1 |

MAX310EPE+ Ulas

Analog Devices MAX310EPE+ is an 8-channel, 8:1 CMOS RF and video multiplexer packaged in a 16-pin PDIP package. The device selects one of eight video inputs and routes it to a common output, providing a practical interface for RF and video routing systems. Its production status, single-channel multiplexing architecture, and through-hole PDIP package make it suitable for established analog and video equipment designs.

A video multiplexer is an interface IC that connects multiple signal sources to one destination while allowing a controller to select the active channel. The MAX310 family belongs to the broader switching and multiplexing hierarchy, where analog switches and multiplexers route RF, video, or instrumentation signals without requiring duplicated receiver chains. The MAX310EPE+ uses CMOS circuitry and provides eight selectable inputs rather than acting as a general-purpose logic switch.

The main defining characteristics are its 8:1 multiplexing ratio, eight channels, CMOS implementation, and 16-pin PDIP package. The unbuffered architecture listed for this device is suitable for routing applications where impedance matching, gain, and signal-level compatibility are handled by the surrounding circuit. It is particularly relevant to video routing, RF signal selection, test and measurement systems, and legacy video equipment that uses through-hole construction.

Because the MAX310EPE+ is designed around an analog switching function, system performance depends on the source impedance, load impedance, signal amplitude, selected channel, and frequency being routed. The device should be evaluated in the complete signal path rather than by switching state alone. PCB routing, grounding, connector geometry, and control-signal timing can materially affect isolation, insertion loss, crosstalk, and signal integrity in high-frequency video systems.

Typical uses include video-source selection in test equipment, routing among multiple RF channels in instrumentation, channel selection in professional video equipment, and embedded analog switching systems. For new designs, engineers should confirm the supported signal frequency, on-resistance, bandwidth, off-isolation, and supply requirements against the current manufacturer datasheet before fixing the board architecture.

Designers should preserve the manufacturer's recommended supply decoupling and provide a low-impedance ground reference close to the device. Control inputs should be driven cleanly and sequenced so that channel changes do not create transient disturbances on sensitive downstream circuitry. Keep analog routing paths short, isolate switching return currents from precision references, and test all channels across the intended operating range.

This page organizes the MAX310EPE+ product identity, package information, sourcing fields, replacement analysis, application guidance, and engineering selection criteria in one concise reference. It also highlights where engineers must validate frequency, voltage, current, and channel performance in the manufacturer datasheet before releasing a production design.

Mga alternatibo na pwedeng ilagay na MAX310EPE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MAX310CPE+

✅ Drop-In
Maxim Integrated
📦 PDIP-16
8-channel CMOS RF/video multiplexer · 8 channels · CMOS · 16-pin PDIP · Through-hole · 16-PDIP · MAX310 · MAX310CPE+

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX310EPE+ Mga Spesipikasyon

Multiplexer Configuration 8:1 ratio
Number of Channels 8 channels
Signal Type RF and video
Architecture Unbuffered
Process Technology CMOS
Package Type PDIP-16
Bilang ng Pins 16 pins
Uri ng Pagpapasok Through-hole
Production Status Production
Manufacturer Analog Devices / Maxim Integrated

Gabay sa Pin Configuration ng MAX310EPE+ pdip-16

Pin configuration para sa MAX310EPE+ (pdip-16 package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng pdip-16 package para sa MAX310EPE+

Wala ng detalyadong pinout data na magagamit para sa MAX310EPE+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX310EPE+ ay nararapat para sa 6 aplikasyons: Video Source Selection, RF Signal Routing, Test and Measurement Routing, Professional Video Equipment, Instrumentation Signal Selection, Industrial Control Signal Routing.

📺

Video Source Selection

The MAX310EPE+ fits video-source selection because it provides eight RF or video inputs in an 8:1 multiplexing arrangement. Place the selected source on the common output path and drive the address or enable controls from the system controller. The unbuffered CMOS design allows the surrounding circuitry to define signal gain and impedance, but engineers must verify video bandwidth, crosstalk, off-isolation, and output loading against the manufacturer datasheet before release.

🌐

RF Signal Routing

The MAX310EPE+ can route one of eight RF-related signal paths into a shared receiver or measurement chain when its frequency and isolation characteristics satisfy the system requirements. Its 8:1 organization reduces duplicated front-end circuitry, while the unbuffered architecture leaves matching and amplification to the surrounding design. Validate high-frequency insertion loss, crosstalk, source impedance, and load impedance because those parameters determine whether the routing path meets the intended RF performance.

🔧

Test and Measurement Routing

The MAX310EPE+ is suitable for selecting among eight instrument or test channels in a controlled analog switching system. The 8:1 architecture allows a common measurement chain to examine multiple inputs without eight complete receiver paths. Designers should minimize trace length, maintain a low-impedance ground, and verify channel repeatability and isolation. Because the mux is unbuffered, the test architecture must account for source and load impedance rather than treating the device as a general-purpose logic switch.

📺

Professional Video Equipment

The MAX310EPE+ supports professional video equipment that needs to choose among several RF or composite-video sources. Its eight-channel CMOS multiplexer can consolidate routing into a shared output stage, reducing the number of duplicated downstream buffers. The through-hole PDIP package also suits established industrial and broadcast-related equipment with larger through-hole PCB layouts. Confirm the supported video bandwidth, signal amplitude, connector impedance, and channel-switching behavior before integrating it into a new chassis.

📡

Instrumentation Signal Selection

The MAX310EPE+ can serve as the front-end channel selector for instrumentation that alternates between up to eight analog signals. A common output may feed an amplifier, converter, or measurement block, simplifying the board hierarchy while retaining individual channel selection. The unbuffered implementation makes impedance matching and gain distribution important design tasks. Validate offset behavior, crosstalk, bandwidth, and switching transients against the exact source impedances used in the final instrument.

🏭

Industrial Control Signal Routing

The MAX310EPE+ can route low-bandwidth analog or control-related signals when a system requires eight selectable inputs and one shared destination. The 8:1 topology is useful in legacy industrial controllers where minimizing duplicated routing logic is important. Its PDIP package remains practical for through-hole assemblies and repairable industrial boards. Confirm supply voltage, signal-level limits, temperature range, and switching characteristics in the manufacturer datasheet before using the mux with feedback, safety-critical, or high-energy signals.

Buod ng mga Inirekomendang Produkto

MAX310 Parent RF video multiplexer family Ginagamit sa: Video Source Selection, RF Signal Routing, Test and Measurement Routing, Professional Video Equipment, Instrumentation Signal Selection, Industrial Control Signal Routing MAX310CPE+ Maxim Integrated Ginagamit sa: Video Source Selection, RF Signal Routing, Test and Measurement Routing, Professional Video Equipment, Instrumentation Signal Selection, Industrial Control Signal Routing
What is the MAX310EPE+?
The MAX310EPE+ is an 8-channel, 8:1 CMOS RF and video multiplexer from Analog Devices in a 16-pin PDIP package. It selects among eight input channels and connects the selected path to a common output. According to the manufacturer datasheet and product page, the device is intended for RF and video routing and is listed in production.
Where can I download the MAX310EPE+ datasheet PDF?
The MAX310EPE+ datasheet is available through the official Analog Devices MAX310 product page at analog.com/en/products/MAX310.html. The page links the 8-channel CMOS RF video multiplexer documentation, product selection table, and ordering information. Use the manufacturer PDF when confirming pin assignments, electrical limits, switching characteristics, and recommended application circuits.
Where can I find the MAX310EPE+ pinout?
The MAX310EPE+ pinout is found in the manufacturer datasheet associated with the official MAX310 product page. The component uses a 16-pin PDIP package, but engineers should use the numbered package drawing and pin-description table before assigning control or signal nets. Confirm the physical pin 1 orientation and all enable or address connections directly against that drawing.
What are the key specifications of MAX310EPE+?
The key MAX310EPE+ specifications are an 8:1 multiplexing ratio, eight RF or video channels, CMOS circuitry, unbuffered operation, and a 16-pin PDIP package. The device is listed in production by Analog Devices. The MAX310 family is identified in the manufacturer documentation as an 8-channel CMOS RF video multiplexer, making it appropriate for controlled analog video and RF routing.
Is the MAX310EPE+ suitable for video routing?
Yes, the MAX310EPE+ is suitable for video-routing applications because it is an 8-channel, 8:1 RF and video multiplexer. The unbuffered CMOS implementation can route a selected source toward a common output when the surrounding circuit manages impedance and signal level. Verify bandwidth, crosstalk, off-isolation, and output loading against the manufacturer datasheet for the intended video standard.
Where can I buy MAX310EPE+ online?
Use the Request a Quote form on this page to ask for MAX310EPE+ availability, current lead time, and a formal quotation. The part is identified as a production 8-channel RF and video multiplexer in a 16-pin PDIP package. Purchase planning should include confirmation of the required package, operating-temperature grade, and production quantity before releasing a purchase order.
What is the price of MAX310EPE+?
The current MAX310EPE+ price depends on quantity, package, and sourcing conditions and can change over time. Submit the part number and required quantity through the Request a Quote form on this page for a current quotation. The form is the appropriate route for commercial pricing without presenting a stale price in technical content.
What is the lead time for MAX310EPE+?
Request the current MAX310EPE+ lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and component availability. For production planning, include the requested delivery date and annual usage so the supplier can confirm allocation and any approved manufacturing schedule.
Is MAX310EPE+ in stock?
Current MAX310EPE+ stock should be confirmed through the Request a Quote form on this page. The manufacturer lists the MAX310 family in production, but production status does not by itself guarantee immediate inventory at every quantity. Provide your required order quantity and target delivery date to obtain the most current availability response.
What is the difference between MAX310EPE+ and MAX310CPE+?
The MAX310EPE+ and MAX310CPE+ are presented as pin- and package-compatible replacements in the available cross-reference information. Both are identified as 16-pin Maxim Integrated single 8:1 analog multiplexers with consistent main performance characteristics and terminals. The suffix difference should still be checked against the exact ordering code and manufacturer selection table before substitution.
When should I choose MAX310EPE+ over MAX310CPE+?
Choose the MAX310EPE+ when the required commercial configuration specifically calls for the EPE+ ordering code or when the manufacturer selection table identifies it as the approved source. The MAX310CPE+ is a documented alternative with the same 16-pin footprint and closely matching multiplexing characteristics. Final selection should account for temperature grade, lifecycle, marking, and procurement requirements.
Is MAX310EPE+ the same as MAX310CPE+?
The MAX310EPE+ and MAX310CPE+ share the same functional architecture, 16-pin package format, and closely matching 8:1 multiplexing characteristics. They are not necessarily identical in every ordering attribute, so treat the MAX310CPE+ as a drop-in candidate rather than an unconditional identity claim. Confirm the exact suffix, grade, markings, and lifecycle against the manufacturer documentation.
What is the best drop-in replacement for MAX310EPE+?
The MAX310CPE+ is the best-supported drop-in candidate identified for the MAX310EPE+ because the cross-reference information reports consistent terminals, package, and main performance characteristics. It uses the same 16-pin footprint and 8:1 multiplexing configuration. Validate the required temperature range and electrical details in the manufacturer selection table before approving it for production.
Can an Analog Devices MAX310 replace the MAX310EPE+?
The MAX310 family can serve as the functional platform for the MAX310EPE+, but the exact package suffix must match the PCB requirement. The MAX310CPE+ is the closest supported 16-pin candidate, while other MAX310 order codes may use different packages or grades. Compare the exact ordering code, pinout, and electrical requirements rather than substituting only on the base family name.
What design constraints matter when using the MAX310EPE+?
The MAX310EPE+ design should preserve its 16-pin PDIP footprint, provide a stable supply, decouple supply pins near the device, and route analog signals over a continuous ground reference. Keep selected-channel traces short and separate control signals from sensitive video paths. Verify frequency response, on resistance, insertion loss, crosstalk, and off-isolation in the manufacturer datasheet for the actual source and load impedances.

Impormasyon ng Talumpati sa Engineering for MAX310EPE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX310EPE+ for an established RF or video routing design that specifically requires an 8-channel, 8:1 CMOS multiplexer in a 16-pin PDIP package. The MAX310CPE+ is the preferred drop-in candidate when its ordering code, temperature grade, and lifecycle status meet the production requirements because the available cross-reference identifies consistent terminals, package, and main performance characteristics. Do not select another MAX310 suffix solely by family resemblance: order codes can represent different packages or grades. For new high-frequency or high-isolation systems, compare the exact datasheet values for bandwidth, on-resistance, off-isolation, crosstalk, supply voltage, and operating temperature. Neither candidate should be used in safety-critical energy paths without dedicated circuit review, and a quantity-aware lifecycle and lead-time check should precede the final sourcing decision.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX310CPE+
Brand Analog Devices / Maxim Integrated Maxim Integrated
Package PDIP-16 PDIP-16 - same
Multiplexing Ratio 8:1 8:1
Number of Channels 8 channels 8 channels
Signal Type RF and video RF and video multiplexer

Pangunahing mga Pagkakaiba

  • Established 8-channel RF and video routing function (kumpara saMAX310CPE+)
  • Through-hole package for established PCB architectures (kumpara saMAX310CPE+)
  • Production-status alignment with the MAX310 platform (kumpara saMAX310CPE+)

Talaan ng Disenyo

Keep the MAX310EPE+ ground and selected analog signal paths short and provide a continuous ground plane beneath the routing area. Place any required supply-decoupling capacitor close to the device power pins with a low-inductance connection. Avoid routing high-current return paths beneath the mux because shared return impedance can couple switching transients into the selected video or RF channel.

Design the unbuffered mux around the actual source and load impedances. Confirm on-resistance, bandwidth, off-isolation, crosstalk, and insertion loss in the manufacturer datasheet, then include connector and trace losses in the channel budget. If the source or load is not suitable for direct connection, add an appropriate buffer or matching network instead of forcing the mux to operate outside its intended operating region.

Do not substitute a MAX310 order code based only on the base family name. Verify the exact package, pin arrangement, temperature grade, production status, and electrical limits. A valid replacement must preserve the 16-pin PDIP footprint and meet the board's required supply, signal, and timing conditions; otherwise, the PCB and surrounding circuitry must be reconsidered.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MAX310 is an interface IC rather than an automotive-qualified power device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX310EPE+ datasheet MAX310EPE+ pinout MAX310EPE+ datasheet pdf MAX310EPE+ equivalent MAX310EPE+ replacement MAX310EPE+ cross reference MAX310EPE+ vs MAX310CPE+ MAX310EPE+ footprint MAX310EPE+ price MAX310EPE+ stock Analog Devices MAX310EPE+ MAX310EPE+ RF video mux MAX310EPE+ PDIP-16 MAX310EPE+ video routing

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices Maxim Integrated MAX310EPE+ MAX310 MAX310CPE+ RF video multiplexer video multiplexer analog multiplexer multiplexer switch IC interface IC CMOS 8:1 multiplexer 8-channel multiplexer unbuffered multiplexer PDIP-16 through-hole package surface-mount alternative RF signal routing video source selection test and measurement common output channel selection power management interface semiconductor
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ