Texas Instruments

MAX3221ECPWR - 250kbps Single RS-232 Transceiver | Texas Instruments

MPN: MAX3221ECPWR ✓ Nakahanda
3 V to 5.5 V Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX3221ECPWR Ulas

The Texas Instruments MAX3221ECPWR is a 3 V to 5.5 V single-channel RS-232 line driver and receiver capable of signaling at 250 kbps, with plus or minus 15 kV ESD protection across the serial-port pins. It is packaged in a 16-pin TSSOP and includes one line driver, one line receiver with a dedicated enable function, and a dual charge-pump circuit. The MAX3221ECPWR provides the electrical interface between an asynchronous communication controller and a serial-port connector while meeting the requirements of TIA/EIA-232-F.

An RS-232 transceiver is an interface IC that converts logic-level signals from a UART or microprocessor into RS-232 voltage levels and converts incoming RS-232 signals back into CMOS-compatible logic. The RS-232 interface belongs to the interface IC hierarchy, where it bridges digital controllers, embedded systems, industrial equipment, and external serial peripherals. The MAX3221E family is designed for single-channel links where a second driver and receiver would add cost and board area without improving the application.

The device operates from a single 3 V to 5.5 V supply, making it suitable for both 3.3 V and 5 V systems. Its internal dual charge-pump circuit generates the positive and negative voltages required by the TIA/EIA-232-F interface without a separate bipolar supply. Data rates up to 250 kbps support legacy serial communication, industrial control links, data acquisition equipment, configuration ports, and service interfaces. Plus or minus 15 kV ESD protection strengthens the serial connector against electrostatic discharge.

The receiver includes a dedicated enable function that can place the receiver in a high-impedance state, while the driver-side enable structure supports controlled interface operation. The MAX3221ECPWR combines these functions in a compact 16-pin TSSOP, allowing a complete RS-232 port to be implemented with a small PCB footprint. Its single-channel architecture is appropriate for point-to-point serial links rather than multi-drop RS-485 networks.

Typical uses include industrial equipment interfaces, laboratory instrumentation, cash-register systems, embedded control panels, and legacy peripheral connections. The 250 kbps maximum data rate exceeds the throughput of many legacy RS-232 ports while retaining compatibility with established TIA/EIA-232-F designs. The 3 V to 5.5 V operating range also allows the same interface topology to be used across mixed-voltage systems.

When laying out the circuit, place the charge-pump capacitors and supply bypass capacitor close to their corresponding pins, and route the driver output and receiver input away from noisy digital signals. Use the manufacturer datasheet pin-description table to verify signal assignments and the exposed ground connection before assigning PCB tracks.

Mga alternatibo na pwedeng ilagay na MAX3221ECPWR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3221ECPWR (parehas na form factor at footprint) — pagkakaiba sa Product Type, Supply Voltage Range, ESD Protection, Number of Receivers, Receiver Enable.

Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
ESD Protection: ±15 kV
Ikabit sa MAX3221ECPWR →
Analog Devices
Product Type: RS-232 transceiver
Supply Voltage Range: +3V to +5.5V
Receiver Enable: Dedicated enable input
Ikabit sa MAX3221ECPWR →
Analog Devices
Product Type: RS-232 transceiver
Supply Voltage Range: 3.0 V to 5.5 V
ESD Protection: +/-15 kV pin-to-pin on RS-232 connection pins
Ikabit sa MAX3221ECPWR →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
Ikabit sa MAX3221ECPWR →
Texas Instruments
Product Type: Single-channel RS-232 line driver and receiver
Supply Voltage Range: 3V to 5.5V
Number of Receivers: 1 receiver
Ikabit sa MAX3221ECPWR →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
ESD Protection: ±15 kV on serial-port connection pins
Number of Receivers: 1 receiver with dedicated enable pin
Ikabit sa MAX3221ECPWR →
Texas Instruments
Product Type: Single-channel RS-232 line driver/receiver
ESD Protection: ±15 kV on serial-port connection pins
Number of Receivers: 1 receiver with dedicated enable pin
Ikabit sa MAX3221ECPWR →

MAX3221IPWR

✅ Drop-In
Texas Instruments
📦 TSSOP-16
Single-channel RS-232 line driver/receiver · 1 driver · 1 receiver with dedicated enable pin · 3 V to 5.5 V · 250 kbps · ±15 kV on serial-port connection pins · TIA/EIA-232-F · Dual charge-pump circuit

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3221EIPWR

✅ Drop-In
📦 TSSOP-16
Same MAX3221E family and TSSOP-16 outline; ordering-option differences can change the temperature grade and packing designation.

📋 Alternatibo na Reference (hindi sa katalogo)

TRS3221EIPWR

✅ Drop-In
📦 TSSOP-16
Functionally equivalent MAX3221E family transceiver with the same TSSOP-16 footprint; verify enable polarity, temperature range, and AutoShutdown details.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3221CPWR

✅ Drop-In
📦 TSSOP-16
Shares the 16-pin TSSOP outline and single-channel RS-232 function but uses the older MAX3221C feature set; ESD and enable specifications require verification.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3221CPWRE4

✅ Drop-In
Texas Instruments
📦 TSSOP-16
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbit/s · 1 · 1 with dedicated enable pin · Dual charge-pump circuit · 0.1 µF · ±15 kV pin-to-pin on serial-port connection pins, including GND

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3221ECPWR Mga Spesipikasyon

Product Type RS-232 line driver and receiver transceiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Drivers 1
Number of Receivers 1
ESD Protection plus or minus 15 kV
Compliance Standard TIA/EIA-232-F
Charge-Pump Configuration Dual charge-pump circuit
Receiver Enable Dedicated enable function
Packhaging 16-pin TSSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MAX3221ECPWR 16-pin tssop

Pin configuration para sa MAX3221ECPWR (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-pin tssop package para sa MAX3221ECPWR

Wala ng detalyadong pinout data na magagamit para sa MAX3221ECPWR.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3221ECPWR ay nararapat para sa 6 aplikasyons: Industrial Controller Serial Port, Laboratory Instrumentation Interface, Embedded Service and Configuration Port, Point-of-Sale and Peripheral Equipment, Data Acquisition and Control Console, Medical and Control Equipment Interface.

🏭

Industrial Controller Serial Port

The MAX3221ECPWR suits industrial controllers that must communicate with legacy RS-232 equipment through a point-to-point serial link. Its 3 V to 5.5 V supply range allows operation from a 3.3 V control rail, while the 250 kbps data rate covers many configuration and supervisory protocols. The internal dual charge-pump generates the required bipolar interface voltages from one supply, reducing external power requirements. Place the charge-pump capacitors near their assigned pins and separate the RS-232 routes from high-current switching paths. The plus or minus 15 kV ESD rating adds useful protection when the connector is exposed to maintenance or industrial discharge events.

🔧

Laboratory Instrumentation Interface

The MAX3221ECPWR provides a compact interface between laboratory instrument control electronics and RS-232 test equipment. Its single-driver, single-receiver arrangement is appropriate for one PC-to-instrument connection and avoids the board area required by a dual-channel transceiver. Operation from 3 V to 5.5 V supports both legacy 5 V instruments and modern 3.3 V controllers. The receiver enable function allows the receiver to be disabled when the bus is not needed, while the driver provides the TIA/EIA-232-F interface level required by the connected equipment. Keep connector routing away from analog front ends and analog grounds to reduce pickup of instrument-level noise.

🖥️

Embedded Service and Configuration Port

The MAX3221ECPWR is well suited to an embedded system that retains a service connector for firmware download, diagnostics, or configuration. The 250 kbps maximum rate supports many legacy host utilities, and the single-supply operation simplifies integration with 3.3 V processors. Because the RS-232 driver supplies bipolar voltage levels, the interface can reach equipment that lacks modern USB or Ethernet ports. Use the dedicated receiver-enable control to prevent unwanted receiver activity when the service port is inactive. The 16-pin TSSOP outline supports a compact implementation, although decoupling and charge-pump layout remain critical to reliable startup and data integrity.

🏬

Point-of-Sale and Peripheral Equipment

The MAX3221ECPWR can bridge a controller to RS-232-based point-of-sale peripherals, receipt printers, scanners, or legacy terminals. Its 250 kbps rate is appropriate for the short, structured transactions typical of these links, and the single driver and receiver match the one-cable topology of most peripheral connections. The 3 V to 5.5 V supply range permits deployment in both established 5 V equipment and newer mixed-voltage designs. The plus or minus 15 kV ESD protection helps the connector survive handling by operators and service personnel. Keep the serial trace short and provide a direct chassis-to-board ground strategy that complies with the enclosure and EMC design of the complete product.

📊

Data Acquisition and Control Console

The MAX3221ECPWR fits a data-acquisition console that receives commands or transfers sampled data through a legacy RS-232 connection. Its single-channel topology minimizes component count, while the 250 kbps rate provides adequate throughput for moderate command traffic and buffered measurement data. The receiver-enable feature allows the controller to isolate the receiver during periods when the remote device may drive the line. Because RS-232 is point-to-point and single-ended, keep the cable length and ground arrangement consistent with the system specification. The device operates from 3 V to 5.5 V, enabling use with both embedded control hardware and externally powered legacy subsystems.

💊

Medical and Control Equipment Interface

The MAX3221ECPWR can serve as a legacy service or control interface in medical and industrial equipment that retains an RS-232 port. The plus or minus 15 kV ESD protection is useful where a connector may be touched during installation or calibration, and the single 3 V to 5.5 V supply simplifies power planning in mixed analog and digital systems. The device performs the level translation but does not replace isolation or medically appropriate surge protection. Place the interface on the side of the board exposed to the connector, and follow the manufacturer layout guidance for charge-pump capacitors and bypassing. Verify the complete enclosure's isolation, creepage, and EMC requirements before external installation.

What is the operating voltage of the MAX3221ECPWR?
The MAX3221ECPWR operates from a single 3 V to 5.5 V supply. According to the Texas Instruments MAX3221 product page, the device can therefore be used with both 3.3 V and 5 V system rails. Its internal charge-pump circuitry generates the bipolar voltages required by the RS-232 interface, so the circuit does not require a separate positive and negative power supply.
What is the maximum data rate of MAX3221ECPWR?
The MAX3221ECPWR supports data rates up to 250 kbps. The Texas Instruments MAX3221 product page identifies the part as a single-channel RS-232 line driver and receiver with a 250 kbps data rate. This rate supports legacy serial ports, industrial control links, and configuration interfaces while remaining compatible with the TIA/EIA-232-F interface requirements.
How much ESD protection does MAX3221ECPWR provide?
The MAX3221ECPWR provides plus or minus 15 kV ESD protection pin to pin, including the serial-port connection pins and ground. The Texas Instruments MAX3221 product page identifies this protection as a distinguishing feature of the device. The rating describes transient withstand capability, so proper connector placement and grounding remain necessary for reliable field operation.
What is the package and pin count of MAX3221ECPWR?
The MAX3221ECPWR is a 16-pin TSSOP surface-mount package. DigiKey identifies the ordering code as a one-driver, one-receiver, full RS-232 transceiver in a 16-TSSOP package. The 16-pin outline is also consistent with the TSSOP-16 package drawing used for the MAX3221 family.
Where can I download the MAX3221ECPWR datasheet PDF?
The official MAX3221ECPWR datasheet is available through the Texas Instruments MAX3221 product page and its linked datasheet document. The direct datasheet entry point is https://www.ti.com/lit/gpn/MAX3221. Use the pin-description table, typical characteristics, and recommended layout sections when assigning signals and placing the charge-pump components.
Where can I find the MAX3221ECPWR pinout?
The MAX3221ECPWR pinout appears in the Pin Description and Pin Configuration sections of the Texas Instruments MAX3221 datasheet. Use that table as the authority when assigning driver, receiver, supply, enable, charge-pump, and ground connections. The device is packaged as a 16-pin TSSOP, and PCB track assignments should follow the datasheet numbering exactly.
What are the key specifications of MAX3221ECPWR that engineers should know?
The MAX3221ECPWR is a 3 V to 5.5 V, single-driver, single-receiver RS-232 transceiver rated for data rates up to 250 kbps. It includes plus or minus 15 kV ESD protection, a dedicated receiver enable function, a dual charge-pump circuit, and a 16-pin TSSOP package. These characteristics support compact, single-ended serial interfaces based on TIA/EIA-232-F.
Is MAX3221ECPWR suitable for 3.3 V microcontroller systems?
Yes, the MAX3221ECPWR is suitable for 3.3 V systems because its specified supply range is 3 V to 5.5 V. Its receiver converts the bipolar RS-232 input to a logic level compatible with the connected UART or controller. Confirm the controller's logic levels, receiver-enable polarity, and interface timing against the manufacturer datasheet before releasing the design.
What is the best drop-in replacement for MAX3221ECPWR?
The MAX3221IPWR is a close same-manufacturer drop-in candidate because it uses the same 16-pin TSSOP format and is identified as an industrial-grade MAX3221 variant. The MAX3221EIPWR, TRS3221EIPWR, and MAX3221CPWR are additional candidates, but their temperature grades, shutdown features, and exact data-sheet ratings must be checked before substituting them in an existing design.
Can TRS3221EIPWR replace MAX3221ECPWR?
The TRS3221EIPWR can be considered as a replacement candidate because it is identified as a functionally equivalent single-channel RS-232 transceiver with the same 16-pin TSSOP format. It is also known as the MAX3221EIPWR within the Texas Instruments product family. Verify enable behavior, temperature range, and charge-pump values against both datasheets before treating it as a drop-in replacement.
When should I choose MAX3221ECPWR instead of MAX3221IPWR?
Choose MAX3221ECPWR when its specified operating temperature range covers the intended environment and the MAX3221E feature set matches the design. Choose MAX3221IPWR when its industrial temperature rating is needed and the shutdown or enable characteristics are acceptable. Both use the same TSSOP-16 format, so the decisive factors are temperature grade, lifecycle requirement, and functional features.
Is MAX3221ECPWR suitable for industrial control and instrumentation?
Yes, MAX3221ECPWR fits many industrial control and laboratory instrumentation interfaces that require a point-to-point RS-232 link. Its 250 kbps data rate and plus or minus 15 kV ESD protection support legacy equipment and exposed serial connections. For installations with severe electrical noise or long cables, add the protection and grounding appropriate to the application environment.
What can replace MAX3221ECPWR on the same PCB?
Several Texas Instruments-family devices can be evaluated as same-footprint replacements for MAX3221ECPWR, including MAX3221IPWR, MAX3221EIPWR, TRS3221EIPWR, and MAX3221CPWR. All use the 16-pin TSSOP format, but a true drop-in substitution also requires compatible enable pins, supply current, charge-pump behavior, and temperature rating. Review both datasheets before approving the change.
Is MAX3221ECPWR the same as MAX3221CPWR?
The MAX3221ECPWR and MAX3221CPWR are related single-channel RS-232 transceivers in the same TSSOP-16 package, but they are not automatically interchangeable. The MAX3221ECPWR is an E-series device with enhanced ESD protection, while the MAX3221CPWR has its own distinct electrical and feature set. Confirm enable behavior, supply current, and temperature range before replacing one with the other.
Where can I buy MAX3221ECPWR and check current availability?
Use the Request a Quote form on this page to request current MAX3221ECPWR availability, commercial terms, and delivery scheduling. The exact quantity break, current stock, and lead time are confirmed through that form rather than embedded in this technical description. Specify the required reel quantity and target date when requesting the quote.
How should the MAX3221ECPWR charge-pump capacitors be placed?
Place the charge-pump capacitors close to their designated C1 and C2 pins, with short, low-inductance connections and a solid ground return. The Texas Instruments MAX3221 datasheet includes the recommended decoupling and charge-pump layout in its layout guidance. Keep the RS-232 driver output and receiver input routing separated from switching nodes and high-current digital return paths to avoid noise coupling.

Impormasyon ng Talumpati sa Engineering for MAX3221ECPWR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3221ECPWR for a new single-channel RS-232 port that operates from 3.3 V or 5 V, requires data rates up to 250 kbps, and benefits from plus or minus 15 kV ESD protection. Its 16-pin TSSOP package is appropriate when one point-to-point link is needed and board area is constrained. MAX3221IPWR is the closest industrial-temperature option to evaluate when the operating environment demands a wider temperature rating. MAX3221EIPWR and TRS3221EIPWR suit designs that need the E-series interface family but may require confirmation of enable and temperature options. MAX3221CPWR or MAX3221CPWRE4 should be selected only after checking the older C-series electrical characteristics against the existing circuit. For any substitution, verify pin assignment, enable polarity, charge-pump values, supply current, temperature, and datasheet lifecycle status before releasing production hardware.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3221IPWR MAX3221EIPWR TRS3221EIPWR MAX3221CPWR MAX3221CPWRE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Device Type Single-channel RS-232 transceiver Single-channel RS-232 transceiver Single-channel RS-232 transceiver Functionally equivalent RS-232 transceiver Single-channel RS-232 transceiver Single-channel RS-232 transceiver
Number of Drivers 1 1 1 1 1 1
Number of Receivers 1 1 1 1 1 1

Pangunahing mga Pagkakaiba

  • Enhanced ESD protection for exposed serial connectors (kumpara saMAX3221CPWR)
  • Single-supply operation across 3.3 V and 5 V systems (kumpara saMAX3221IPWR)
  • Single-channel footprint reduces board area (kumpara saMAX3232ECDR)
  • Dedicated receiver enable supports controlled interface states (kumpara saTRS3221EIPWR)

Talaan ng Disenyo

Route the MAX3221ECPWR charge-pump and bypass connections as short, direct paths. Place the C1 and C2 capacitors at their designated pins and connect the device ground to a low-impedance plane rather than through a narrow neck. Keep the RS-232 driver output and receiver input away from switching-node copper. This separation prevents charge-pump transitions and supply noise from coupling directly into the low-level receiver input.

Apply the Texas Instruments layout guidance for the charge-pump network and provide a quiet ground return beneath the interface area. RS-232 uses large signal swings, but the receiver still responds to residual noise coupled through shared supply and ground impedances. Use a dedicated local bypass capacitor at VCC and avoid sharing narrow return paths with motors, relays, or switching converters. The manufacturer's recommended layout should take precedence over generic decoupling assumptions.

Do not treat every 16-pin TSSOP transceiver as an automatic substitution. Verify enable-pin polarity, shutdown behavior, temperature grade, supply-current limits, and charge-pump capacitance values when replacing MAX3221ECPWR with MAX3221IPWR, MAX3221EIPWR, TRS3221EIPWR, or MAX3221CPWR. Also confirm that the receiver output is not left floating when its enable function is inactive. These checks prevent board-level incompatibilities that are not apparent from the package drawing alone.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MAX3221ECPWR is identified as meeting TIA/EIA-232-F interface requirements and provides plus or minus 15 kV ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals classifications should be confirmed on the current manufacturer product page before procurement.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3221ECPWR datasheet MAX3221ECPWR pinout MAX3221ECPWR datasheet pdf MAX3221ECPWR equivalent MAX3221ECPWR replacement MAX3221ECPWR cross reference MAX3221ECPWR vs MAX3221IPWR MAX3221ECPWR TSSOP-16 Texas Instruments MAX3221ECPWR MAX3221ECPWR 250kbps RS-232 MAX3221ECPWR price MAX3221ECPWR stock MAX3221ECPWR industrial interface MAX3221ECPWR charge pump capacitor MAX3221ECPWR RS-232 transceiver

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments MAX3221ECPWR MAX3221IPWR MAX3221EIPWR TRS3221EIPWR MAX3221CPWR MAX3221CPWRE4 RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC UART interface charge-pump circuit TIA/EIA-232-F ESD protection TSSOP-16 surface mount 3.3 V power supply 5 V power supply 250 kbps data rate industrial control laboratory instrumentation data acquisition point-of-sale equipment embedded service port
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ