MAX3221ECPWR - 250kbps Single RS-232 Transceiver | Texas Instruments
부품 번호: MAX3221ECPWR ✓ 활성MAX3221ECPWR 개요
An RS-232 transceiver is an interface IC that converts logic-level signals from a UART or microprocessor into RS-232 voltage levels and converts incoming RS-232 signals back into CMOS-compatible logic. The RS-232 interface belongs to the interface IC hierarchy, where it bridges digital controllers, embedded systems, industrial equipment, and external serial peripherals. The MAX3221E family is designed for single-channel links where a second driver and receiver would add cost and board area without improving the application.
The device operates from a single 3 V to 5.5 V supply, making it suitable for both 3.3 V and 5 V systems. Its internal dual charge-pump circuit generates the positive and negative voltages required by the TIA/EIA-232-F interface without a separate bipolar supply. Data rates up to 250 kbps support legacy serial communication, industrial control links, data acquisition equipment, configuration ports, and service interfaces. Plus or minus 15 kV ESD protection strengthens the serial connector against electrostatic discharge.
The receiver includes a dedicated enable function that can place the receiver in a high-impedance state, while the driver-side enable structure supports controlled interface operation. The MAX3221ECPWR combines these functions in a compact 16-pin TSSOP, allowing a complete RS-232 port to be implemented with a small PCB footprint. Its single-channel architecture is appropriate for point-to-point serial links rather than multi-drop RS-485 networks.
Typical uses include industrial equipment interfaces, laboratory instrumentation, cash-register systems, embedded control panels, and legacy peripheral connections. The 250 kbps maximum data rate exceeds the throughput of many legacy RS-232 ports while retaining compatibility with established TIA/EIA-232-F designs. The 3 V to 5.5 V operating range also allows the same interface topology to be used across mixed-voltage systems.
When laying out the circuit, place the charge-pump capacitors and supply bypass capacitor close to their corresponding pins, and route the driver output and receiver input away from noisy digital signals. Use the manufacturer datasheet pin-description table to verify signal assignments and the exposed ground connection before assigning PCB tracks.
드롭인 대체품: MAX3221ECPWR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3221ECPWR (동일 폼 팩터 및 풋프린트) — 차이점: Product Type, Supply Voltage Range, ESD Protection, Number of Receivers, Receiver Enable.
MAX3221IPWR
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221EIPWR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
TRS3221EIPWR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221CPWR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221CPWRE4
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221ECPWR 사양
| Product Type | RS-232 line driver and receiver transceiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| ESD Protection | plus or minus 15 kV |
| Compliance Standard | TIA/EIA-232-F |
| Charge-Pump Configuration | Dual charge-pump circuit |
| Receiver Enable | Dedicated enable function |
| 패키지 | 16-pin TSSOP |
| 실장 유형 | Surface mount |
MAX3221ECPWR 16-pin tssop 핀 구성 가이드
MAX3221ECPWR(16-pin tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3221ECPWR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3221ECPWR 적합 용도: 6 애플리케이션s: Industrial Controller Serial Port, Laboratory Instrumentation Interface, Embedded Service and Configuration Port, Point-of-Sale and Peripheral Equipment, Data Acquisition and Control Console, Medical and Control Equipment Interface.
Industrial Controller Serial Port
The MAX3221ECPWR suits industrial controllers that must communicate with legacy RS-232 equipment through a point-to-point serial link. Its 3 V to 5.5 V supply range allows operation from a 3.3 V control rail, while the 250 kbps data rate covers many configuration and supervisory protocols. The internal dual charge-pump generates the required bipolar interface voltages from one supply, reducing external power requirements. Place the charge-pump capacitors near their assigned pins and separate the RS-232 routes from high-current switching paths. The plus or minus 15 kV ESD rating adds useful protection when the connector is exposed to maintenance or industrial discharge events.
추천
Laboratory Instrumentation Interface
The MAX3221ECPWR provides a compact interface between laboratory instrument control electronics and RS-232 test equipment. Its single-driver, single-receiver arrangement is appropriate for one PC-to-instrument connection and avoids the board area required by a dual-channel transceiver. Operation from 3 V to 5.5 V supports both legacy 5 V instruments and modern 3.3 V controllers. The receiver enable function allows the receiver to be disabled when the bus is not needed, while the driver provides the TIA/EIA-232-F interface level required by the connected equipment. Keep connector routing away from analog front ends and analog grounds to reduce pickup of instrument-level noise.
추천
Embedded Service and Configuration Port
The MAX3221ECPWR is well suited to an embedded system that retains a service connector for firmware download, diagnostics, or configuration. The 250 kbps maximum rate supports many legacy host utilities, and the single-supply operation simplifies integration with 3.3 V processors. Because the RS-232 driver supplies bipolar voltage levels, the interface can reach equipment that lacks modern USB or Ethernet ports. Use the dedicated receiver-enable control to prevent unwanted receiver activity when the service port is inactive. The 16-pin TSSOP outline supports a compact implementation, although decoupling and charge-pump layout remain critical to reliable startup and data integrity.
추천
Point-of-Sale and Peripheral Equipment
The MAX3221ECPWR can bridge a controller to RS-232-based point-of-sale peripherals, receipt printers, scanners, or legacy terminals. Its 250 kbps rate is appropriate for the short, structured transactions typical of these links, and the single driver and receiver match the one-cable topology of most peripheral connections. The 3 V to 5.5 V supply range permits deployment in both established 5 V equipment and newer mixed-voltage designs. The plus or minus 15 kV ESD protection helps the connector survive handling by operators and service personnel. Keep the serial trace short and provide a direct chassis-to-board ground strategy that complies with the enclosure and EMC design of the complete product.
추천
Data Acquisition and Control Console
The MAX3221ECPWR fits a data-acquisition console that receives commands or transfers sampled data through a legacy RS-232 connection. Its single-channel topology minimizes component count, while the 250 kbps rate provides adequate throughput for moderate command traffic and buffered measurement data. The receiver-enable feature allows the controller to isolate the receiver during periods when the remote device may drive the line. Because RS-232 is point-to-point and single-ended, keep the cable length and ground arrangement consistent with the system specification. The device operates from 3 V to 5.5 V, enabling use with both embedded control hardware and externally powered legacy subsystems.
추천
Medical and Control Equipment Interface
The MAX3221ECPWR can serve as a legacy service or control interface in medical and industrial equipment that retains an RS-232 port. The plus or minus 15 kV ESD protection is useful where a connector may be touched during installation or calibration, and the single 3 V to 5.5 V supply simplifies power planning in mixed analog and digital systems. The device performs the level translation but does not replace isolation or medically appropriate surge protection. Place the interface on the side of the board exposed to the connector, and follow the manufacturer layout guidance for charge-pump capacitors and bypassing. Verify the complete enclosure's isolation, creepage, and EMC requirements before external installation.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3221ECPWR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3221IPWR | MAX3221EIPWR | TRS3221EIPWR | MAX3221CPWR | MAX3221CPWRE4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Device Type | Single-channel RS-232 transceiver | Single-channel RS-232 transceiver | Single-channel RS-232 transceiver | Functionally equivalent RS-232 transceiver | Single-channel RS-232 transceiver | Single-channel RS-232 transceiver |
| Number of Drivers | 1 | 1 | 1 | 1 | 1 | 1 |
| Number of Receivers | 1 | 1 | 1 | 1 | 1 | 1 |
주요 차별점
- Enhanced ESD protection for exposed serial connectors (vs MAX3221CPWR)
- Single-supply operation across 3.3 V and 5 V systems (vs MAX3221IPWR)
- Single-channel footprint reduces board area (vs MAX3232ECDR)
- Dedicated receiver enable supports controlled interface states (vs TRS3221EIPWR)
설계 노트
Route the MAX3221ECPWR charge-pump and bypass connections as short, direct paths. Place the C1 and C2 capacitors at their designated pins and connect the device ground to a low-impedance plane rather than through a narrow neck. Keep the RS-232 driver output and receiver input away from switching-node copper. This separation prevents charge-pump transitions and supply noise from coupling directly into the low-level receiver input.
Apply the Texas Instruments layout guidance for the charge-pump network and provide a quiet ground return beneath the interface area. RS-232 uses large signal swings, but the receiver still responds to residual noise coupled through shared supply and ground impedances. Use a dedicated local bypass capacitor at VCC and avoid sharing narrow return paths with motors, relays, or switching converters. The manufacturer's recommended layout should take precedence over generic decoupling assumptions.
Do not treat every 16-pin TSSOP transceiver as an automatic substitution. Verify enable-pin polarity, shutdown behavior, temperature grade, supply-current limits, and charge-pump capacitance values when replacing MAX3221ECPWR with MAX3221IPWR, MAX3221EIPWR, TRS3221EIPWR, or MAX3221CPWR. Also confirm that the receiver output is not left floating when its enable function is inactive. These checks prevent board-level incompatibilities that are not apparent from the package drawing alone.
규정 준수 정보
The MAX3221ECPWR is identified as meeting TIA/EIA-232-F interface requirements and provides plus or minus 15 kV ESD protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals classifications should be confirmed on the current manufacturer product page before procurement.