Texas Instruments

MAX3232CPWG4 - 2/2 RS-232 Transceiver, 3-5.5V | TI

MPN: MAX3232CPWG4 ✓ Nakahanda
3 V to 5.5 V Vdss TIA/EIA-232-F and ITU V.28 Rds(on) 16-pin TSSOP, 4.40 mm width Package
MOQ: 1 |

MAX3232CPWG4 Ulas

The Texas Instruments MAX3232CPWG4 is a 2-driver, 2-receiver RS-232 transceiver designed for 3 V to 5.5 V operation, with a maximum data rate of 250 kbit/s and ±15 kV ESD protection. The device is packaged in a 16-pin TSSOP and uses a dual charge-pump architecture to generate the bipolar voltage levels required by RS-232 line drivers.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232-compatible line levels and converts incoming RS-232 signals back into logic levels. It belongs to the interface IC hierarchy and is commonly placed between a host UART connector and an external data-processing or communications device. The MAX3232 family supports both 3.3 V and 5 V system rails, making it useful in industrial controllers, embedded systems, test equipment, and legacy serial-port designs.

Key features include two RS-232 drivers, two RS-232 receivers, a 3 V to 5.5 V supply range, operation up to 250 kbit/s, and ±15 kV ESD protection on the serial-port connections. The 16-pin TSSOP package reduces board area compared with larger SOIC options, while the integrated charge pump eliminates the need for a separate RS-232 line-voltage supply. Four external 0.1 µF charge-pump capacitors are required for normal operation.

Technically, the MAX3232CPWG4 combines a dual charge-pump circuit with push-pull line drivers and receiver inputs. The charge pump develops positive and negative rails internally, allowing the drivers to produce compliant RS-232 levels from a single low-voltage supply. The receiver stage supports reliable detection of the RS-232 logic states, while the transceiver architecture supports both transmit and receive paths on the same device.

Typical applications include industrial serial adapters, embedded instrumentation, programmable-logic-controller interfaces, barcode and label equipment, board-to-board serial links, and test or measurement systems that retain an RS-232 port. In these systems, the device provides level translation while reducing the number of external power rails and supporting compact, high-speed serial communication.

For PCB design, place the four 0.1 µF charge-pump capacitors close to their associated C1+, C1−, C2+, and C2− pins, and route the RS-232 connector signals with return-path awareness. Because ESD events occur at externally accessible connectors, maintain a short ground path and consider additional board-level protection when cables are long or the equipment is used in severe industrial environments.

This product page combines the manufacturer's device data with practical application guidance, package information, replacement analysis, and design notes. It is intended to help engineers evaluate the MAX3232CPWG4 quickly while preserving the electrical and layout checks required for a dependable RS-232 interface.

Mga alternatibo na pwedeng ilagay na MAX3232CPWG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3232CPWG4 (parehas na form factor at footprint) — pagkakaiba sa Package, Supply Voltage Range, Maximum Data Rate, External Charge-Pump Capacitors, Number of Receivers.

Texas Instruments
Package: 16-pin TSSOP (PW)
External Charge-Pump Capacitors: 0.1 µF
Number of Receivers: 2
Ikabit sa MAX3232CPWG4 →
Maxim Integrated
Package: 16-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
Ikabit sa MAX3232CPWG4 →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
Number of Receivers: 2
Ikabit sa MAX3232CPWG4 →
Maxim Integrated
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 1 Mbps
External Charge-Pump Capacitors: 4 x 0.1 uF
Ikabit sa MAX3232CPWG4 →
Texas Instruments
Package: 16-pin TSSOP
Supply Voltage Range: 3V to 5.5V
Maximum Data Rate: 250kbit/s
Ikabit sa MAX3232CPWG4 →

MAX3232IPW

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver and receiver · 2 channels · 2 channels · 3V to 5.5V · 250kbit/s · ±15kV · 5V logic · 0.1µF

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232EIPWG4

✅ Drop-In
Texas Instruments
📦 16-pin TSSOP
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232EUE+

✅ Drop-In
Maxim Integrated
📦 16-pin TSSOP
RS-232 · Dual Transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · True RS-232 · Dual charge pump

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232CUE+

✅ Drop-In
Maxim Integrated
📦 16-pin TSSOP
2/2 RS-232 transceiver · 3.0 V to 5.5 V · 1 Mbps · 2 · 2 · TTL/CMOS · Dual · 4 capacitors, 0.1 µF each

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232CPWR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver/receiver transceiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 0.1 µF

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232CPWG4 Mga Spesipikasyon

Transceiver Configuration 2 drivers and 2 receivers
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbit/s
Interface Standard RS-232
ESD Protection ±15 kV
Packhaging 16-pin TSSOP, 4.40 mm width
Uri ng Pagpapasok Surface Mount
External Charge-Pump Capacitors 4 capacitors, 0.1 µF each
Supply Compatibility 3 V and 5 V supply operation
Driver Count 2
Receiver Count 2
Transceiver Type Multichannel line driver and receiver
Technology Standards TIA/EIA-232-F and ITU V.28
ESD Test Model Human-Body Model, ±15 kV

Pin Configuration ng MAX3232CPWG4

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
Pin 1 R1OUT — Receiver 1 output
Pin 2 R1IN — Receiver 1 input
Pin 3 R2IN — Receiver 2 input
Pin 4 R2OUT — Receiver 2 output
Pin 5 T1IN — Driver 1 logic input
Pin 6 T1OUT — Driver 1 RS-232 output
Pin 7 T2OUT — Driver 2 RS-232 output
Pin 8 T2IN — Driver 2 logic input
Pin 9 GND — Ground
Pin 10 VCC — Positive supply input
Pin 11 C1+ — Charge-pump capacitor 1 positive terminal
Pin 12 C1- — Charge-pump capacitor 1 negative terminal
Pin 13 C2+ — Charge-pump capacitor 2 positive terminal
Pin 14 C2- — Charge-pump capacitor 2 negative terminal
Pin 15 V- — Negative charge-pump output
Pin 16 V+ — Positive charge-pump output

Tipikal na mga Gamit

MAX3232CPWG4 ay nararapat para sa 6 aplikasyons: Industrial Serial Adapter, Programmable Logic Controller Interface, Test and Measurement Equipment, Barcode and Label Equipment, Board-to-Board Serial Link, Embedded Diagnostic Port.

🏭

Industrial Serial Adapter

The MAX3232CPWG4 fits an industrial serial adapter that converts a 3.3 V or 5 V UART into an RS-232 port. Its two transmitters and two receivers support bidirectional serial communication, while the 3 V to 5.5 V supply range permits integration with both embedded processor families. The 250 kbit/s maximum data rate covers legacy equipment and supervisory protocols that remain below that limit. Four 0.1 µF charge-pump capacitors generate the required bipolar driver voltages, while ±15 kV ESD protection strengthens the externally accessible connector interface.

🏭

Programmable Logic Controller Interface

The MAX3232CPWG4 is appropriate for a programmable logic controller or embedded controller that must retain an RS-232 service or programming port. Its 2/2 arrangement allows two connections without sharing a driver, and operation from 3 V to 5.5 V supports industrial logic levels that may differ from the legacy RS-232 side. The 16-pin TSSOP footprint preserves PCB area compared with larger packages. Designers should route the charge-pump network close to the IC and provide a low-impedance ground connection at the serial connector to improve return-path behavior.

🖥️

Test and Measurement Equipment

The MAX3232CPWG4 can provide a compact RS-232 control port in test and measurement equipment, including legacy analyzers, programmable fixtures, and laboratory interfaces. Its 250 kbit/s capability supports many serial-control protocols, while the 2/2 channel count allows separate command and response paths. The 3 V to 5.5 V operating range allows the transceiver to share power with modern test-controller hardware. The ±15 kV HBM-rated protection is useful when the port is connected to a cable, although cable transients may justify additional surge protection outside the IC.

🧩

Barcode and Label Equipment

The MAX3232CPWG4 suits barcode scanners, label printers, and handheld equipment that communicate with a host through RS-232. The 2/2 transceiver architecture supports bidirectional command and data exchange, and the 250 kbit/s rate is suitable for typical point-to-point scanner traffic. A 3.3 V system can power the transceiver directly within its 3 V to 5.5 V range, simplifying power design. Keep the serial traces away from switching nodes and place the four charge-pump capacitors directly beside their associated pins to minimize charge-pump disturbance.

🌐

Board-to-Board Serial Link

The MAX3232CPWG4 is usable on a board-to-board cable link when legacy RS-232 levels and distance make the logic-level UART unsuitable. Its two transmit and two receive paths support a full-duplex interface, while the dual charge pump creates the positive and negative voltages required by the drivers from one 3 V to 5.5 V supply. The 16-pin TSSOP package suits compact control boards. For reliable operation, provide a common ground reference, maintain compatible logic levels on the UART side, and avoid relying on the transceiver's ESD rating as a substitute for a complete enclosure-level protection strategy.

🔧

Embedded Diagnostic Port

The MAX3232CPWG4 fits an embedded diagnostic or service port that provides access to a controller during development, manufacturing, or field maintenance. The 2/2 configuration supports dedicated transmit and receive signals, and the 3 V to 5.5 V range permits use with both 3.3 V and 5 V embedded processors. At 250 kbit/s, the interface can carry command output, diagnostic responses, and firmware-download traffic where the host software supports that rate. The exposed connector should have a nearby chassis or signal-ground reference, and the PCB should avoid long unprotected stubs between the connector and ESD-protected transceiver pins.

What is the operating voltage of MAX3232CPWG4?
The MAX3232CPWG4 operates from 3 V to 5.5 V. According to the manufacturer datasheet, this range supports both 3.3 V and 5 V system environments while generating the positive and negative levels required by the RS-232 drivers. The device is therefore useful when a design must support a common serial transceiver across two supply domains, provided its charge-pump capacitors and decoupling are implemented as specified.
What are the key specifications of MAX3232CPWG4 that engineers should know?
The MAX3232CPWG4 is a 2-driver, 2-receiver RS-232 transceiver with a 3 V to 5.5 V supply range, 250 kbit/s maximum data rate, ±15 kV ESD protection, and a 16-pin TSSOP package. According to the manufacturer datasheet, it uses four external 0.1 µF charge-pump capacitors and supports TIA/EIA-232-F and ITU V.28 operation. These specifications define its core suitability for compact, low-voltage serial interfaces.
Where can I download the MAX3232CPWG4 datasheet PDF?
The MAX3232CPWG4 datasheet PDF is available from Texas Instruments through the product datasheet link on this page. The document contains the authoritative pin description, electrical characteristics, charge-pump capacitor requirements, ESD ratings, and recommended application circuit. When assigning PCB nets, use the pin-description table in the manufacturer datasheet and verify all 16 TSSOP connections before releasing the layout.
Where can I find the MAX3232CPWG4 pinout?
The MAX3232CPWG4 uses a 16-pin TSSOP, and its complete pin assignment is shown on this page and defined in the manufacturer datasheet. Pins 11 through 14 are assigned to the two charge-pump capacitor networks, while pins 15 and 16 provide the generated negative and positive voltage rails. Use the package drawing for physical pin orientation and the datasheet pin table for electrical functions.
Does MAX3232CPWG4 require external charge-pump capacitors?
Yes. The MAX3232CPWG4 requires four external 0.1 µF capacitors connected to C1+, C1−, C2+, and C2−. According to the manufacturer datasheet, these capacitors form the dual charge-pump circuit that generates the positive and negative supplies required by the RS-232 line drivers. Place each capacitor close to its associated pins and maintain short, symmetrical charge-pump traces.
What is the maximum data rate of MAX3232CPWG4?
The MAX3232CPWG4 supports data rates up to 250 kbit/s. According to the manufacturer datasheet, the 2/2 transceiver can therefore serve as a bridge between a logic-level UART and an RS-232 port when the cable, receiver, and system timing support that rate. Confirm that the connected UART, isolation device, connector, and cable also support 250 kbit/s operation.
What ESD protection does MAX3232CPWG4 provide?
The MAX3232CPWG4 provides ±15 kV Human-Body Model ESD protection on the serial-port connections, including ground. According to the manufacturer datasheet, the device is designed for externally accessible RS-232 interfaces and operates with supplies up to 5.5 V. Board-level protection may still be appropriate for long cables, severe industrial environments, or systems requiring protection beyond the device rating.
Is MAX3232CPWG4 suitable for a 3.3 V embedded UART?
Yes. The MAX3232CPWG4 is suitable for a 3.3 V embedded UART because its specified supply range is 3 V to 5.5 V. Its 2/2 architecture supports two RS-232 transmit paths and two receive paths, while the internal charge pump generates the bipolar levels needed by the drivers. Verify UART signal levels, connector wiring, and grounding when the host operates from a 3.3 V rail.
MAX3232CPWG4 vs MAX3232EUE+ - which is better for a new design?
The MAX3232CPWG4 is preferable when the design specifically requires the 16-pin TSSOP package and the MAX3232 family's 2/2 RS-232 configuration, while MAX3232EUE+ is also a 16-pin TSSOP transceiver with closely related core operation. According to Texas Instruments' comparison material, MAX3232E is an improved direct drop-in replacement for MAX3232 and is recommended for new designs. Review the detailed electrical tables before changing the release.
When should I choose MAX3232CPWG4 over MAX3232IPW?
Choose MAX3232CPWG4 when the released design requires the specified MAX3232C-family feature set and 16-pin TSSOP construction; choose MAX3232IPW when its exact electrical characteristics better match the system. Both devices use the same package family and provide a 2/2 RS-232 interface. The decision should be based on the manufacturer ordering table, ESD requirements, temperature grade, and the exact suffix attached to the released part number.
What is the best drop-in replacement for MAX3232CPWG4?
The MAX3232EUE+ is a strong same-package drop-in candidate because it is identified as a 16-pin TSSOP RS-232 transceiver and Texas Instruments describes MAX3232E as an improved direct drop-in replacement for MAX3232. However, engineers should verify the detailed pinout, supply limits, ESD rating, temperature range, and lifecycle status before substitution. The candidate list on this page contains only devices presented as matching the 16-pin TSSOP format.
Can MAX3232CUE+ replace MAX3232CPWG4 on an existing PCB?
The MAX3232CUE+ can be considered for a drop-in assessment because it belongs to the MAX3232C family and is compared directly with MAX3232CPWG4 in a 16-pin TSSOP format. Before replacing the component, compare the exact pin functions, operating-temperature grade, ESD qualification, and shipping format in the manufacturer datasheets. A shared package name alone is not sufficient for an unconditional production substitution.
Is MAX3232EIPW the same as MAX3232CPWG4?
The MAX3232EIPW and MAX3232CPWG4 are related 16-pin TSSOP RS-232 transceivers, but they are not identified by one common MPN and should not be treated as automatically identical. According to Texas Instruments' comparison material, MAX3232E provides an improved MAX3232 replacement with closely related operation. Confirm the detailed electrical characteristics, ESD rating, and exact pin assignment before using either suffix interchangeably.
Where can I buy MAX3232CPWG4 and check its lead time?
Use the Request a Quote form on this page to request MAX3232CPWG4 pricing, current inventory, and lead time. Quote requests should state the required quantity, target package, and whether tube, tape-and-reel, or another authorized shipping format is needed. The exact schedule should be confirmed at the time of quotation because production and logistics conditions can change.
What is the price of MAX3232CPWG4?
The current MAX3232CPWG4 price depends on order quantity, package shipping format, and current supply conditions. Submit a Request a Quote through the form on this page to obtain a quantity-specific response. If you need a production commitment, include your forecast, annual usage, and approved manufacturing schedule in the request so the supply plan can be evaluated.
Is MAX3232CPWG4 in stock?
Inventory for MAX3232CPWG4 changes with market activity and order volume. Use the Request a Quote form on this page to request a current stock and delivery response for the quantity and package format needed. For safety-critical or time-sensitive builds, request the complete schedule in writing rather than relying on a general availability statement.
What is the best cross-brand equivalent for MAX3232CPWG4?
A cross-brand equivalent should not be selected solely from a generic cross-reference result. It must match the 16-pin TSSOP footprint, 2-driver and 2-receiver arrangement, 3 V to 5.5 V supply range, RS-232 levels, ESD requirement, and operating-temperature grade. The available cross-reference material does not identify a verified competitor with enough pin-level detail for an unconditional drop-in recommendation, so verify any candidate against the manufacturer datasheet before layout release.

Impormasyon ng Talumpati sa Engineering for MAX3232CPWG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3232CPWG4 when the design requires a 16-pin TSSOP, 2-driver and 2-receiver RS-232 interface operating from 3 V to 5.5 V at up to 250 kbit/s. Select MAX3232EUE+ or MAX3232EIPW when the MAX3232E family's updated features are preferred and the exact suffix has been validated against the target schematic. MAX3232IPW is appropriate when its specific electrical and qualification details meet the design, while MAX3232CUE+ remains a same-package MAX3232C-family candidate. MAX3232CPW is the closest base ordering option when its suffix-specific qualification and shipping requirements are acceptable. No cross-brand device is recommended without a documented pin-by-pin and electrical comparison; a shared package designation alone does not establish drop-in compatibility.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232IPW MAX3232EIPW MAX3232EUE+ MAX3232CUE+ MAX3232CPW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Transceiver Configuration 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers 2 drivers / 2 receivers
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount

Pangunahing mga Pagkakaiba

  • Direct 16-pin TSSOP integration (kumpara saMAX3232EUE+)
  • Three-rail compatibility for embedded systems (kumpara saMAX3232IPW)
  • Defined ESD performance for connector interfaces (kumpara saMAX3232CUE+)

Talaan ng Disenyo

Place the four 0.1 µF charge-pump capacitors immediately adjacent to C1+, C1−, C2+, and C2−. Keep the loop formed by each capacitor and its associated device pin as small as practical. Use short ground and supply connections, avoid placing test pads between the capacitors and IC pins, and follow the charge-pump layout in the manufacturer datasheet. This is especially important in compact TSSOP layouts where switching currents can couple into adjacent UART and connector routes.

Route RS-232 driver outputs directly toward the connector and keep receiver inputs away from noisy switching nodes and the charge-pump capacitor area. Maintain a continuous ground reference between the transceiver ground and the connector ground. If the cable is externally accessible, avoid long unprotected traces between the connector and the MAX3232CPWG4, and provide chassis grounding or additional protection according to the enclosure's surge and ESD requirements.

Do not treat every MAX3232 suffix as electrically or commercially identical. Confirm that the exact replacement uses the 16-pin TSSOP footprint, supports the intended 3 V or 5 V supply, provides two drivers and two receivers, and meets the required ESD and temperature conditions. Also verify the shipping format, because an electrically compatible IC in a tube may not be acceptable to an automated production line configured for tape-and-reel presentation.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device is an industrial RS-232 interface IC, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232CPWG4 datasheet MAX3232CPWG4 pinout MAX3232CPWG4 datasheet pdf MAX3232CPWG4 equivalent MAX3232CPWG4 replacement MAX3232CPWG4 16-TSSOP MAX3232CPWG4 RS-232 MAX3232CPWG4 250 kbit/s MAX3232CPWG4 ±15 kV ESD MAX3232CPWG4 vs MAX3232EUE+ MAX3232CPWG4 price MAX3232CPWG4 stock Texas Instruments MAX3232CPWG4 MAX3232CPWG4 industrial serial adapter MAX3232CPWG4 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments MAX3232CPWG4 MAX3232IPW MAX3232EIPW MAX3232EUE+ MAX3232CUE+ MAX3232CPW RS-232 transceiver RS-232 interface IC line driver line receiver interface IC semiconductor dual charge pump UART TIA/EIA-232-F ITU V.28 Human-Body Model ESD protection 16-pin TSSOP TSSOP package family surface mount 250 kbit/s 3 V to 5.5 V supply
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ