Analog Devices

MAX3232EEUP+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232EEUP+TG1Z ✓ Nakahanda
3.0V to 5.5V Vdss 10nA Id 20-pin TSSOP Package
MOQ: 1 |

MAX3232EEUP+TG1Z Ulas

The Analog Devices MAX3232EEUP+TG1Z is a dual-driver, dual-receiver RS-232 transceiver with operation from 3.0V to 5.5V, data rates up to 1Mbps, and 15kV ESD protection in a 20-pin TSSOP package. It also features low-power operation with supply current down to 10nA.

An RS-232 transceiver is an interface IC that converts between complementary logic-level signals and the voltage-defined signaling used by RS-232 equipment. The MAX3232EEUP+TG1Z belongs to the RS-232 transceiver class within interface ICs and semiconductor signal-conditioning products. Its integrated level conversion allows a low-voltage digital system to communicate with legacy serial peripherals, industrial controllers, and computer equipment without external line-driver circuitry.

The device provides two transmit channels and two receive channels, supporting full-duplex point-to-point links when both directions are required. Operation across a 3.0V to 5.5V supply range allows it to interface with 3.3V and 5V digital logic systems. The 1Mbps maximum data rate supports modern high-speed serial links, while 15kV ESD protection strengthens the interface against electrostatic discharge encountered in industrial and commercial environments.

The MAX3232E family uses an on-chip charge-pump circuit to generate the positive and negative voltage levels required by RS-232 transmitters. This architecture permits true RS-232 operation from a single low-voltage supply. The manufacturer identifies the MAX3232E as pin, package, and functionally compatible with the industry-standard MAX232, while also providing low-power characteristics suited to portable and power-conscious equipment.

Typical applications include industrial serial adapters, data-acquisition equipment, test and measurement instruments, point-of-sale terminals, and control systems that exchange data with RS-232 devices. The 20-pin TSSOP package supports compact surface-mount construction, although correct charge-pump capacitor placement and controlled RS-232 signal routing remain essential for reliable operation.

For PCB design, place the external charge-pump capacitors close to their associated pins and keep RS-232 driver traces away from sensitive logic or analog nets. Confirm logic thresholds and signal direction before connecting external equipment because the transceiver's TTL-side inputs and outputs do not provide galvanic isolation. Confirm electrostatic requirements against the application's enclosure, grounding, and cable environment.

This page combines manufacturer compatibility information, structured technical specifications, practical application guidance, and same-package replacement analysis to support faster component selection and PCB-level replacement decisions.

Mga alternatibo na pwedeng ilagay na MAX3232EEUP+TG1Z — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3232EEUP+TG1Z (parehas na form factor at footprint) — pagkakaiba sa ESD Protection.

Analog Devices
ESD Protection: ±15kV
Ikabit sa MAX3232EEUP+TG1Z →

MAX3232EEUP+

✅ Drop-In
Analog Devices
📦 20-pin TSSOP
RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232EEUP

✅ Drop-In
📦 20-pin TSSOP
Same MAX3232E dual-transceiver family and 20-pin TSSOP footprint; the + suffix designation differs, with no verified change to the 3.0V to 5.5V or 1Mbps core ratings.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3222EEUP+TG1Z

✅ Drop-In
📦 20-pin TSSOP
Shares the 20-pin TSSOP MAX32xxE interface family, but adds a 1uA shutdown mode with receiver monitoring; core supply voltage and maximum data rate remain matched.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232EUP+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 20-pin TSSOP
Same MAX3232E dual-driver, dual-receiver architecture in 20-pin TSSOP; legacy ordering suffix may change compliance ordering designation, while the core interface rating remains aligned.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232CUP+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 20-pin TSSOP
Same MAX3232 dual-transceiver and 20-pin TSSOP architecture; the C-series generation differs in low-power and operating characteristics while retaining the 3.0V to 5.5V interface class.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232EEUP+TG1Z Mga Spesipikasyon

Product Type RS-232 transceiver
Number of Transmitters 2
Number of Receivers 2
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection 15kV
Low-Power Supply Current 10nA
Interface Standard True RS-232
Packhaging 20-pin TSSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MAX3232EEUP+TG1Z 20-pin tssop

Pin configuration para sa MAX3232EEUP+TG1Z (20-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 20-pin tssop package para sa MAX3232EEUP+TG1Z

Wala ng detalyadong pinout data na magagamit para sa MAX3232EEUP+TG1Z.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3232EEUP+TG1Z ay nararapat para sa 6 aplikasyons: Industrial Serial Data Acquisition, Test and Measurement Instruments, Point-of-Sale Terminal Interfaces, Embedded Control and Monitoring, Data Communications Equipment, Portable Diagnostic Equipment.

🏭

Industrial Serial Data Acquisition

The MAX3232EEUP+TG1Z fits legacy RS-232 data-acquisition equipment because it provides two transmit channels, two receive channels, and operation up to 1Mbps from a 3.0V to 5.5V supply. Place the device between the controller's logic-level UART and the isolated or grounded RS-232 connector circuitry. Its 15kV ESD protection improves interface robustness in industrial environments, while the integrated charge pump generates compliant positive and negative line voltages. The 20-pin TSSOP layout keeps the converter compact, although external charge-pump capacitors must be placed close to their pins and the RS-232 route should be kept away from sensitive measurement circuitry.

🔧

Test and Measurement Instruments

The MAX3232EEUP+TG1Z is suitable for RS-232 control and response ports on test and measurement instruments because it combines a 1Mbps data rate with a 3.0V to 5.5V supply range. A modern instrument controller can communicate through logic-level UART pins while the transceiver supplies the required RS-232 voltage levels. Two transmitters and two receivers support bidirectional control and status channels without adding another package. Use short, controlled traces between the transceiver and connector, and apply the datasheet's charge-pump capacitor placement to minimize coupling into the instrument's analog or precision timing sections.

🖥️

Point-of-Sale Terminal Interfaces

The MAX3232EEUP+TG1Z can connect a compact point-of-sale controller to older RS-232 peripherals such as scanners, printers, or customer displays. The 3.0V to 5.5V operating range allows use with 3.3V and 5V control electronics, while the 1Mbps capability provides ample bandwidth for short command and transaction exchanges. Two receivers can monitor peripheral status and two transmitters can support control and data paths. Keep the cable-side nets physically separated from high-speed logic, and verify ground relationships because RS-232 does not provide galvanic isolation between connected systems.

🧩

Embedded Control and Monitoring

The MAX3232EEUP+TG1Z is appropriate for embedded controllers that must communicate with RS-232 sensors, service tools, or remote monitoring units. A 3.3V controller can operate the transceiver within its 3.0V to 5.5V range, and the 1Mbps rate supports responsive command traffic. The integrated ESD protection is valuable where cables enter compact or industrial enclosures, although it does not replace surge protection for long cables. Maintain a controlled ground reference, avoid placing the RS-232 traces beneath sensitive digital routes, and use the manufacturer's recommended capacitor values for stable charge-pump operation.

🌐

Data Communications Equipment

The MAX3232EEUP+TG1Z fits legacy data-communications equipment requiring bidirectional RS-232 connectivity without a separate positive and negative supply. Its two transmitters and two receivers support full-duplex links when both ends of a port are active, while the single 3.0V to 5.5V supply simplifies system power design. The 1Mbps maximum rate is suitable for command-oriented links and legacy peripheral traffic. In multiport systems, allocate the two channels carefully and preserve the distinction between logic-side and cable-side pins to prevent incorrect transmitter or receiver connections.

📱

Portable Diagnostic Equipment

The MAX3232EEUP+TG1Z supports portable diagnostic and configuration equipment that uses RS-232 for service access or external sensor connections. The low-power current down to 10nA is advantageous when the equipment spends substantial time in a low-energy state, while the 3.0V to 5.5V supply range accommodates portable logic levels. Its 20-pin TSSOP package supports compact surface-mount construction. Confirm the active-state supply consumption for the final battery budget, and follow the recommended shutdown-state behavior if the serial interface must remain available for remote monitoring.

What are the key specifications of MAX3232EEUP+TG1Z?
The MAX3232EEUP+TG1Z is a dual-driver, dual-receiver RS-232 transceiver rated for 3.0V to 5.5V operation and data rates up to 1Mbps. According to the Analog Devices MAX3232E datasheet, it provides true RS-232 signaling, 15kV ESD protection, and a low-power current down to 10nA. The device is packaged in a 20-pin TSSOP for surface-mount assemblies.
What is the operating voltage of MAX3232EEUP+TG1Z?
The MAX3232EEUP+TG1Z operates from a 3.0V minimum supply to a 5.5V maximum supply. This range supports both 3.3V and 5V digital systems. According to the Analog Devices MAX3232E datasheet, the transceiver generates the positive and negative RS-232 signal levels internally from its single low-voltage supply.
How fast can MAX3232EEUP+TG1Z transmit RS-232 data?
The MAX3232EEUP+TG1Z supports data rates up to 1Mbps. According to the Analog Devices MAX3232E datasheet, this rate is suitable for RS-232 links carrying command responses, configuration data, or short high-speed transfers. Actual application throughput can be lower when protocol overhead, cable characteristics, system timing, or flow control reduces the effective payload rate.
Where can I download the MAX3232EEUP+TG1Z datasheet PDF?
The manufacturer information for the MAX3232EEUP+TG1Z is available from the Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. Open the datasheet link on that page and select the MAX3232E documentation. Use the pin description, electrical characteristics, and typical application circuits before assigning PCB connections.
Where can I find the MAX3232EEUP+TG1Z pinout?
The MAX3232EEUP+TG1Z pin assignment is documented in the MAX3232E manufacturer datasheet under the Pin Description and Typical Application Circuit sections. The device uses a 20-pin TSSOP package. Assign PCB nets from the datasheet pin table, including the charge-pump capacitor connections and the distinction between TTL-side logic pins and RS-232 line pins.
Is the MAX3232EEUP+TG1Z compatible with 3.3V logic?
Yes, the MAX3232EEUP+TG1Z is designed for operation from a 3.0V to 5.5V supply, making it suitable for systems using 3.3V logic. According to the Analog Devices MAX3232E datasheet, the interface includes true RS-232 level translation. Verify the concrete input and output thresholds against the logic family used by the connected controller before releasing the design.
What can replace MAX3232EEUP+TG1Z on the same PCB?
The closest same-footprint choices are compatible members of the MAX3232E family and the related MAX3222E interface family, subject to shutdown and power-state checks. The manufacturer states that MAX3232E is compatible with the industry-standard MAX232 in pin, package, and function. For a production substitution, confirm package dimensions, pin names, supply limits, and power behavior in the manufacturer datasheet.
What is the best drop-in replacement for MAX3232EEUP+TG1Z?
A drop-in replacement must preserve the 20-pin TSSOP land pattern and the required charge-pump connections while meeting the 3.0V to 5.5V supply and 1Mbps speed requirements. MAX3232EEUP and MAX3222EEUP+TG1Z are relevant family comparisons, but the MAX3222E adds a low-power shutdown mode. Verify all functional differences and external capacitor values before substitution.
Is MAX3232EEUP+TG1Z the same as MAX3232EEUP+?
MAX3232EEUP+TG1Z and MAX3232EEUP+ identify the same MAX3232EEUP device with different ordering or packing information, but they must not be treated as automatically interchangeable without checking the manufacturer ordering guide. The electrical family is the same; verify the package, temperature grade, compliance suffix, and delivery format against the part labeling used by the BOM and distributor records.
When should I choose MAX3232EEUP+TG1Z over MAX3222EEUP+TG1Z?
Choose MAX3232EEUP+TG1Z when the design requires two full-duplex RS-232 channels, operation to 1Mbps, and a single 3.0V to 5.5V supply without relying on the MAX3222E shutdown feature. Choose MAX3222EEUP+TG1Z when receiver monitoring during a 1uA shutdown state is valuable. The MAX3232E offers lower-power operation down to 10nA according to its manufacturer documentation.
Is MAX3232EEUP+TG1Z suitable for an industrial RS-232 interface?
The MAX3232EEUP+TG1Z is suitable for many industrial RS-232 interfaces because it supports 3.0V to 5.5V operation, rates up to 1Mbps, and 15kV ESD protection. The Analog Devices MAX3232E datasheet also identifies compatibility with the standard MAX232 interface. Add appropriate enclosure grounding, cable protection, and isolation where the connected equipment can present ground-potential or surge hazards.
What cross-brand equivalent can replace MAX3232EEUP+TG1Z?
A cross-brand replacement should not be selected from a family-name similarity alone. It must match the 20-pin TSSOP footprint, 3.0V to 5.5V supply range, 1Mbps data rate, receiver and transmitter assignments, and charge-pump architecture. The current manufacturer and comparison information does not identify a confirmed cross-brand drop-in candidate, so request a quote for the original MPN or consult the manufacturer before approving an equivalent.
Does MAX3232EEUP+TG1Z need external charge-pump capacitors?
Yes, the MAX3232EEUP+TG1Z requires external charge-pump capacitors to support its internal RS-232 voltage generation. According to the Analog Devices MAX3232E datasheet, the capacitors connect to designated charge-pump pins and should use the specified capacitance and tolerance. Place them close to the device and follow the recommended layout to minimize switching noise and unstable transmitter operation.
Where can I buy MAX3232EEUP+TG1Z and check its lead time?
Use the Request a Quote form on this page to request MAX3232EEUP+TG1Z pricing, stock confirmation, and current lead time. Quote requests also allow the required quantity, delivery format, and target date to be reviewed together. The structured pricing fields remain empty because the current product listing does not expose a qualifying quantity-break price table for the exact MPN.
What is the price of MAX3232EEUP+TG1Z?
The current unit and volume pricing for MAX3232EEUP+TG1Z is handled through the Request a Quote form on this page. Submit the required quantity and delivery requirements to obtain a current quotation and availability confirmation. No static price figure is presented because the product listing does not contain a qualifying quantity-break table for this exact ordering code.
Is MAX3232EEUP+TG1Z in stock and what is its lead time?
Use the Request a Quote form on this page to request a current stock check and lead-time confirmation for MAX3232EEUP+TG1Z. Include the required order quantity, delivery format, and target date so procurement can confirm the appropriate schedule. Stock status and lead time can vary with order quantity and supply conditions, so they should be confirmed for each quotation.

Impormasyon ng Talumpati sa Engineering for MAX3232EEUP+TG1Z — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3232EEUP+TG1Z for a compact, dual-channel RS-232 interface operating from 3.0V to 5.5V, particularly when 1Mbps performance and 15kV ESD protection are priorities. MAX3232EEUP+ is the closest ordering-code comparison when the same electrical device and 20-pin TSSOP footprint are required, but confirm the exact label and delivery format before substitution. MAX3222EEUP+TG1Z is appropriate when the receiver must remain active during a 1uA shutdown state; its shutdown behavior differs from the MAX3232E family. MAX3232EUP+ may suit legacy MAX3232E designs, while MAX3232CUP+ represents an earlier C-series generation with different low-power characteristics. For every alternative, verify package drawings, pin assignments, supply limits, charge-pump capacitor values, logic thresholds, and shutdown requirements against the manufacturer datasheet before PCB release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232EEUP+ MAX3232EEUP MAX3222EEUP+TG1Z MAX3232EUP+ MAX3232CUP+
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter Count 2 2 2 2 2 2
Receiver Count 2 2 2 2 2 2
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Industry Compatibility Pin, package, and functionally compatible with MAX232 MAX3232E compatible MAX3232E compatible MAX3222E compatible MAX3232E compatible MAX3232C family

Pangunahing mga Pagkakaiba

  • Lower specified low-power current (kumpara saMAX3222EEUP+TG1Z)
  • Direct MAX232 interface compatibility (kumpara saMAX3232CUP+)
  • One-Mbps operation with modern supply range (kumpara saMAX3232EUP+)

Talaan ng Disenyo

Place the external charge-pump capacitors directly beside the designated MAX3232E pins and use the capacitance and tolerance specified in the manufacturer datasheet. Keep the capacitor return paths short and avoid routing the charge-pump nets beneath the analog section. Correct placement reduces switching transients and helps the transmitters maintain stable RS-232 voltage levels under data traffic.

Separate logic-side nets from RS-232 cable-side nets in the PCB layout and maintain clear spacing around connector entry points. Route the RS-232 lines away from clocks, ADC inputs, and sensitive sensor traces. Where a cable can introduce surge energy beyond the device's 15kV ESD capability, add an appropriately rated external protection network and verify it does not distort receiver thresholds.

Do not treat TTL logic pins and RS-232 line pins as interchangeable. Confirm each transmitter output, receiver input, ground, supply, and charge-pump connection against the manufacturer pin-description table. Also check whether the application expects receiver monitoring during shutdown; MAX3222E-family behavior differs from MAX3232E-family behavior and can affect a drop-in decision.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The + ordering designation may be associated with lead-free or RoHS status, but the manufacturer document linked by the product listing does not explicitly state the applicable status. Confirm the ordering guide and material declaration for the exact suffix before release.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232EEUP+TG1Z datasheet MAX3232EEUP+TG1Z datasheet pdf MAX3232EEUP+TG1Z pinout MAX3232EEUP+TG1Z equivalent MAX3232EEUP+TG1Z replacement MAX3232EEUP+TG1Z cross reference MAX3232EEUP+TG1Z footprint MAX3232EEUP+TG1Z price MAX3232EEUP+TG1Z stock Analog Devices MAX3232EEUP+TG1Z MAX3232EEUP 20 TSSOP pinout MAX3232EEUP+TG1Z RS-232 application MAX3232EEUP+TG1Z vs MAX3222EEUP+TG1Z

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3232EEUP+TG1Z MAX3232EEUP+ MAX3232EEUP MAX3222EEUP+TG1Z MAX3232EUP+ MAX3232CUP+ RS-232 transceiver RS-232 interface IC line driver line receiver full-duplex serial communication charge-pump voltage converter 3.0V to 5.5V power supply 1Mbps data rate 15kV ESD protection 10nA low-power current 20-pin TSSOP TSSOP package family surface-mount technology MAX232 compatibility industrial serial interface test and measurement equipment RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ