Analog Devices

MAX3232EEWE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices

MPN: MAX3232EEWE+TG1Z ✓ Nakahanda
3.0V to 5.5V Vdss Down to 10nA Id 16-SOIC Package
MOQ: 1 |

MAX3232EEWE+TG1Z Ulas

Analog Devices MAX3232EEWE+TG1Z is a dual transmitter and dual receiver RS-232 interface IC operating from a 3.0V to 5.5V supply. It supports data rates up to 1Mbps, provides ±15kV ESD protection, and is offered in a 16-SOIC package. The device is designed for bidirectional serial data links that require true RS-232 signal levels rather than logic-level UART connections.

An RS-232 transceiver is an interface IC within the broader communications-interface and semiconductor hierarchy. Its transmitters convert logic-level UART signals into RS-232 voltage levels, while its receivers convert incoming RS-232 signals back into logic-compatible levels. This allows equipment with different logic voltage domains to communicate across a wired serial interface while adding the electrical characteristics required by RS-232.

The MAX3232EEWE+TG1Z provides two transmit channels and two receive channels, a maximum data rate of 1Mbps, and an operating supply range of 3.0V to 5.5V. Its ±15kV ESD protection improves tolerance of electrostatic discharge at connector-facing pins. The low-power design is specified with supply current down to 10nA, making it suitable for systems that need a low-overhead serial interface.

The MAX3232 family uses integrated level-shaping circuitry to generate the bipolar voltage levels expected by RS-232 links from a single low-voltage supply. Designers still need to observe the recommended charge-pump capacitor values, connect supply and ground properly, and account for the voltage and current limitations of the RS-232 interface. The manufacturer states that MAX3232E devices are pin, package, and functionally compatible with the industry-standard MAX232, subject to verification of the exact ordering variant.

Typical uses include industrial serial consoles, data-acquisition equipment, point-of-sale systems, instrumentation, embedded-control links, and service interfaces. The 16-SOIC package is also convenient for repairs and redesigns of legacy RS-232 equipment because the family maintains compatibility with established MAX232-class interfaces.

When designing around this IC, confirm that the host UART uses the correct logic voltage and that the RS-232 cable is connected with the proper signal-to-ground relationship. Place the charge-pump capacitors and bypass capacitance close to their assigned pins, and keep connector protection and chassis-ground strategy separate from the sensitive receiver path.

This product page consolidates electrical characteristics, package information, documented drop-in alternatives, and application-focused design guidance. It also distinguishes verified ordering variants from broader MAX3232-family options so engineers can assess PCB reuse, channel count, temperature grade, and lifecycle requirements before approving a substitution.

Mga alternatibo na pwedeng ilagay na MAX3232EEWE+TG1Z — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3232EEWE+TG1Z (parehas na form factor at footprint) — pagkakaiba sa Package.

Analog Devices
Package: 16-pin SOIC
Ikabit sa MAX3232EEWE+TG1Z →

MAX3232EEWE+

✅ Drop-In
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver · 3.0V to 5.5V · 1Mbps · 2 · 2 · Full duplex · ±15kV · Down to 10nA

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232EIDR

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232ECDR

✅ Drop-In
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232EEUE+

✅ Drop-In
📦 16-SOIC
Cross-reference information describes consistent terminals and package characteristics; the MAX3232EEUE+ suffix is 0% different in core function but requires temperature-code confirmation.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3227EEAE/V+T

✅ Drop-In
📦 16-SOIC
Related 16-pin MAX32xx RS-232 interface family; the MAX3227 configuration differs by one channel versus the MAX3232 family.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX3232EEWE+TG1Z Mga Spesipikasyon

Transceiver Configuration 2 transmitters and 2 receivers
Uri ng Interface Full RS-232
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection ±15kV
Low Supply Current Down to 10nA
Packhaging 16-SOIC
Uri ng Pagpapasok Surface mount
Bilang ng Pins 16 pins

Gabay sa Pin Configuration ng MAX3232EEWE+TG1Z 16-soic

Pin configuration para sa MAX3232EEWE+TG1Z (16-soic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-soic package para sa MAX3232EEWE+TG1Z

Wala ng detalyadong pinout data na magagamit para sa MAX3232EEWE+TG1Z.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3232EEWE+TG1Z ay nararapat para sa 6 aplikasyons: Industrial Serial Console, Point-of-Sale Terminal Interface, Data-Acquisition Equipment, Embedded Control Communication, Test and Measurement Instrumentation, Service and Configuration Port.

🏭

Industrial Serial Console

The MAX3232EEWE+TG1Z fits legacy RS-232 console connections because it provides two transmitters, two receivers, a 3.0V to 5.5V supply range, and operation up to 1Mbps. Place the IC between the equipment UART and a DB9 or terminal connector, then use the manufacturer charge-pump capacitor arrangement to generate true RS-232 levels. Its ±15kV ESD rating is particularly relevant where the connector is exposed to user-contact discharge. The 16-SOIC package is also suitable for repairing or updating instruments that originally used MAX232-compatible interfaces. Final layout review should account for the exact pinout, ground-return strategy, and any isolation or surge-protection components required by the installation environment.

🖥️

Point-of-Sale Terminal Interface

Point-of-sale equipment commonly relies on RS-232 links for service consoles, printers, scanners, and local configuration tools. The MAX3232EEWE+TG1Z offers the required two-driver, two-receiver arrangement in a 16-SOIC package, while its 3.0V to 5.5V operating range allows connection to modern 3.3V or 5V digital systems. The 1Mbps maximum data rate supports typical asynchronous serial traffic, and ±15kV ESD protection adds useful robustness at an accessible connector. In a point-of-sale product, keep the transceiver close to the connector and use a defined chassis or signal-ground strategy, because proper return-path design remains essential for reliable communication over longer RS-232 cables.

📟

Data-Acquisition Equipment

The MAX3232EEWE+TG1Z can connect laboratory and industrial data-acquisition equipment to a host computer over RS-232. Two transmit and two receive channels support bidirectional control and status exchanges without requiring a larger multi-channel transceiver. Its low-voltage 3.0V to 5.5V supply operation suits embedded control systems, and the up-to-1Mbps capability provides margin beyond many legacy instrument baud rates. The interface is not isolated, so installations with long cables, different ground potentials, or high-noise environments may need external isolation. For such systems, retain the MAX3232E near the logic side of the connector and evaluate whether added surge, isolation, or common-mode protection changes the ESD design.

🤖

Embedded Control Communication

The MAX3232EEWE+TG1Z provides a straightforward bridge between an embedded controller's UART and a true RS-232 peer. A single 3.0V to 5.5V supply powers the interface, while the integrated charge-pump circuitry produces the required bipolar transmit levels. The two-channel arrangement can support separate command and status paths, and the 1Mbps capability allows the design to be reused across several asynchronous serial baud rates. Because this is a non-isolated transceiver, verify the ground relationship between connected systems before deployment. The 16-SOIC package also makes it practical to add or repair an RS-232 port on an existing controller board without changing to a larger transceiver package.

🔧

Test and Measurement Instrumentation

Legacy oscilloscopes, spectrum analyzers, and bench instruments frequently expose RS-232 for remote commands and logged data. The MAX3232EEWE+TG1Z is suitable for a modern controller to recreate that interface because it combines two RS-232 transmitters, two receivers, 3.0V to 5.5V operation, and data rates up to 1Mbps in a 16-SOIC package. Its ±15kV ESD protection is useful when users connect and disconnect cables, although the complete connector path still needs careful grounding and surge design. When replacing an older MAX232 implementation, compare the MAX3232E family pin and package compatibility statement with the exact board layout. Use the manufacturer reference circuit for charge-pump capacitor values and placement to avoid marginal operation.

🔌

Service and Configuration Port

A dedicated service or configuration port gives technicians a way to update equipment, retrieve diagnostics, and run production tests. The MAX3232EEWE+TG1Z implements two RS-232 transmit channels and two receive channels, allowing one port to handle both command traffic and equipment status. Its 3.0V to 5.5V supply range supports embedded logic operating at 3.3V or 5V, while the maximum 1Mbps rate provides broad compatibility with established asynchronous protocols. The ESD-protected interface is useful at a connector that maintenance personnel can access. Keep the UART traces short, place decoupling and charge-pump capacitors close to the IC, and provide a consistent signal-ground reference between the host and target equipment to minimize communication errors.

What is the MAX3232EEWE+TG1Z?
The MAX3232EEWE+TG1Z is a dual-transmitter, dual-receiver RS-232 transceiver IC operating from 3.0V to 5.5V at up to 1Mbps. According to the Analog Devices MAX3232E product page, the MAX3232E family is pin, package, and functionally compatible with the industry-standard MAX232. The specified orderable configuration is housed in a 16-SOIC package.
What are the key specifications of MAX3232EEWE+TG1Z that engineers should know?
The MAX3232EEWE+TG1Z combines two RS-232 transmitters, two receivers, a 3.0V to 5.5V supply range, and operation up to 1Mbps in a 16-SOIC package. The product is also identified as a true RS-232 transceiver with ±15kV ESD protection and supply current down to 10nA. These characteristics place it between a basic UART logic interface and a fully isolated serial transceiver.
Where can I download the MAX3232EEWE+TG1Z datasheet PDF?
The official MAX3232E datasheet and product information are available through the Analog Devices MAX3232E product page at analog.com. The target ordering code is MAX3232EEWE+TG1Z, while the family documentation also covers MAX3232E variants in different package and temperature options. Use the manufacturer datasheet for final pin, capacitor, electrical-limit, and ordering-code verification before releasing a PCB.
Where can I find the MAX3232EEWE+TG1Z pinout?
Use the pin-description and package-drawing sections of the official Analog Devices MAX3232E datasheet to locate the MAX3232EEWE+TG1Z pinout. The device is specified in a 16-SOIC package, but individual signal names are not reproduced here because they are not explicitly stated in the product listing. The datasheet also provides the required charge-pump capacitor connections and package dimensions.
Is the MAX3232EEWE+TG1Z compatible with MAX232?
Yes, Analog Devices states that MAX3232E devices are pin, package, and functionally compatible with the industry-standard MAX232. That manufacturer statement applies at the MAX3232E family level, so engineers should still confirm the exact package variant, temperature suffix, and ordering code. The MAX3232EEWE+TG1Z is identified specifically as a 16-SOIC device.
What is the best drop-in replacement for MAX3232EEWE+TG1Z?
The MAX3232EEWE+ is the closest documented drop-in candidate because the product listing identifies the same 2/2 full-RS-232 configuration and 16-SOIC package. MAX3232EIDR and MAX3232ECDR also appear in cross-reference comparisons and use related MAX3232E variants. Confirm temperature grade, package dimensions, and production status against the manufacturer datasheet before approving any substitution.
What can replace MAX3232EEWE+TG1Z?
A valid replacement must preserve the 16-SOIC footprint, two transmitters, two receivers, 3.0V to 5.5V supply operation, and required RS-232 electrical behavior. MAX3232EEWE+ is the closest documented option, while MAX3232EIDR and MAX3232ECDR are family-related alternatives. Cross-reference results alone do not override package, temperature, lifecycle, or ESD requirement checks.
Is MAX3232EEWE+TG1Z the same as MAX3232EEUE+?
No conclusion should be based only on the nearly identical family names. Cross-reference information describes MAX3232EEWE+ and MAX3232EEUE+ as having consistent terminal and package characteristics, but the exact suffix can identify different package, temperature, or production options. Verify the manufacturer ordering table and compare the 16-SOIC dimensions and electrical ratings before treating them as interchangeable.
What is the difference between MAX3232EEWE+TG1Z and MAX3232EIDR?
Both parts belong to the MAX3232E family, but their exact ordering codes can represent different package and temperature options. The MAX3232EEWE+TG1Z is identified as a 16-SOIC 2/2 RS-232 transceiver, while MAX3232EIDR is a related 16-pin family member. The temperature range, exact package suffix, lifecycle status, and production configuration require confirmation from the manufacturer ordering data.
When should I choose MAX3232EEWE+TG1Z over a MAX3232EIDR?
Choose MAX3232EEWE+TG1Z when the design specifically calls for the listed 16-SOIC MAX3232EEWE+ configuration and its operating-temperature requirements match the assembled product. Consider MAX3232EIDR when its documented temperature grade, lifecycle state, and availability better fit the target application. Neither part should be selected from the suffix alone; compare the complete ordering codes and datasheets.
Is MAX3232EEWE+TG1Z suitable for industrial serial interfaces?
The MAX3232EEWE+TG1Z is suitable for many industrial RS-232 links because it provides two transmit channels, two receive channels, operation up to 1Mbps, and ±15kV ESD protection. Industrial suitability still depends on the specified temperature range, system isolation requirements, cable length, connector protection, and grounding method. Those details are not established by the distributor listing alone.
Does MAX3232EEWE+TG1Z need external charge-pump capacitors?
The MAX3232E implementation uses external charge-pump capacitors to generate the bipolar RS-232 signal levels from a single low-voltage supply. Follow the exact capacitor values, tolerance, and placement shown in the Analog Devices datasheet rather than substituting values from another RS-232 family. Place each capacitor directly across its designated pins and preserve the recommended layout around the device.
How much ESD protection does MAX3232EEWE+TG1Z provide?
The MAX3232EEWE+TG1Z is specified with ±15kV ESD protection. The Analog Devices product listing identifies it as a ±15kV ESD-protected true RS-232 transceiver, making it more suitable for connector-adjacent implementations than an unprotected logic-level UART interface. The datasheet should be used to identify which pins carry the rating and the applicable test configuration.
Where to buy MAX3232EEWE+TG1Z online?
Use the Request a Quote form on this page to request MAX3232EEWE+TG1Z availability, current pricing, and lead time. The product is listed as a 16-SOIC 2/2 full-RS-232 transceiver from Analog Devices, also offered as MAX3232EEWE-TG1Z in some product URLs. Supply the target quantity and required shipping destination with the request.
What is the price of MAX3232EEWE+TG1Z?
Current pricing for MAX3232EEWE+TG1Z should be requested through the Request a Quote form on this page because commercial terms and quantity breaks are quote dependent. The part is listed as a 16-SOIC RS-232 transceiver with two transmitters and two receivers. Provide the required quantity, package preference, and destination so the current offer can be prepared.
What is the lead time and stock status of MAX3232EEWE+TG1Z?
Request the current stock position, minimum order quantity, and lead time for MAX3232EEWE+TG1Z using the Request a Quote form on this page. Product listings show that the exact 16-SOIC ordering variant is distributed, but listing presence alone does not establish current inventory or a guaranteed delivery date. The quotation response should confirm the available quantity and production schedule.
What is the best Analog Devices equivalent for MAX3232EEWE+TG1Z?
The closest documented Analog Devices candidate is MAX3232EEWE+, which is listed with the same 2/2 full-RS-232 configuration and 16-SOIC package. MAX3232EIDR and MAX3232ECDR are also family-related parts identified in cross-reference comparisons. The manufacturer datasheet and ordering table should determine whether the exact suffix provides an acceptable drop-in match for production use.

Impormasyon ng Talumpati sa Engineering for MAX3232EEWE+TG1Z — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3232EEWE+TG1Z when the design requires a 16-SOIC, dual-driver and dual-receiver RS-232 interface operating from 3.0V to 5.5V at up to 1Mbps, particularly for a legacy MAX232-compatible board. MAX3232EEWE+ is the closest documented functional match, but verify its ordering and temperature details. MAX3232EIDR and MAX3232ECDR may be preferable when their temperature grade or lifecycle characteristics better match the application. MAX3232EEUE+ should be selected only after checking the full suffix and package dimensions. MAX3227EEAE/V+T is a related MAX32xx interface whose channel arrangement differs, so it is appropriate only when its receiver/transmitter configuration satisfies the system requirement. For every alternative, validate pinout, capacitor values, electrical limits, operating temperature, and lifecycle before production release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232EEWE+ MAX3232EIDR MAX3232ECDR MAX3232EEUE+ MAX3227EEAE/V+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-SOIC 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same 16-SOIC - same
Interface Type Full RS-232 Full RS-232 RS-232 RS-232 Full RS-232 RS-232

Pangunahing mga Pagkakaiba

  • Documented MAX232 family compatibility (kumpara saMAX3232EIDR)
  • Higher data-rate capability than conventional legacy RS-232 links (kumpara saMAX3232EEWE+)
  • Defined ESD protection for connector-adjacent use (kumpara saMAX3227EEAE/V+T)

Talaan ng Disenyo

Place the charge-pump capacitors directly across the pins and terminals specified by the Analog Devices MAX3232E datasheet. Keep the associated ground and supply paths short, place supply bypassing at the device, and route the charge-pump nodes away from UART receive traces where practical. Correct capacitor placement preserves startup behavior and minimizes coupling from the switched-capacitor voltage generator into sensitive receive channels.

Do not treat the MAX3232E family compatibility statement as permission to ignore the exact ordering suffix. MAX3232EEWE+TG1Z, MAX3232EIDR, MAX3232ECDR, and MAX3232EEUE+ can differ in package details, temperature grade, or production configuration. Before substitution, compare the complete ordering table, 16-SOIC dimensions, pin names, temperature range, ESD conditions, and lifecycle status against the original design.

The RS-232 interface is non-isolated, so connector grounding determines noise and reliability. Route the transceiver interface according to the manufacturer reference layout, provide a continuous return path, and keep the logic-side ground and UART traces away from high-current switching nodes. For long cables or systems with large ground-potential differences, evaluate an external isolation or surge-protection solution rather than relying on the IC's ±15kV ESD rating alone.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The product listing does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The IC is not an automotive-qualified component unless the exact ordering code is separately documented as AEC-Q100 qualified.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232EEWE+TG1Z datasheet MAX3232EEWE+TG1Z pinout MAX3232EEWE+TG1Z datasheet pdf MAX3232EEWE+TG1Z equivalent MAX3232EEWE+TG1Z replacement MAX3232EEWE+TG1Z cross reference MAX3232EEWE+TG1Z vs MAX3232EIDR MAX3232EEWE+TG1Z footprint MAX3232EEWE+TG1Z schematic MAX3232EEWE+TG1Z price MAX3232EEWE+TG1Z stock Analog Devices MAX3232EEWE+TG1Z MAX3232EEWE+TG1Z 16-SOIC MAX3232EEWE+TG1Z RS-232 transceiver

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3232EEWE+TG1Z MAX3232EEWE+ MAX3232EIDR MAX3232ECDR MAX3232EEUE+ MAX3227EEAE/V+T MAX3232E MAX232 RS-232 transceiver RS-232 interface IC communication interface IC semiconductor dual transmitter dual receiver 16-SOIC SOIC package family surface-mount package UART charge-pump capacitor ESD protection ±15kV ESD protection 3.0V to 5.5V supply 1Mbps data rate 10nA low supply current
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ