MAX3232EEWE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices
MPN: MAX3232EEWE+TG1Z ✓ 啟用中MAX3232EEWE+TG1Z 概覽
An RS-232 transceiver is an interface IC within the broader communications-interface and semiconductor hierarchy. Its transmitters convert logic-level UART signals into RS-232 voltage levels, while its receivers convert incoming RS-232 signals back into logic-compatible levels. This allows equipment with different logic voltage domains to communicate across a wired serial interface while adding the electrical characteristics required by RS-232.
The MAX3232EEWE+TG1Z provides two transmit channels and two receive channels, a maximum data rate of 1Mbps, and an operating supply range of 3.0V to 5.5V. Its ±15kV ESD protection improves tolerance of electrostatic discharge at connector-facing pins. The low-power design is specified with supply current down to 10nA, making it suitable for systems that need a low-overhead serial interface.
The MAX3232 family uses integrated level-shaping circuitry to generate the bipolar voltage levels expected by RS-232 links from a single low-voltage supply. Designers still need to observe the recommended charge-pump capacitor values, connect supply and ground properly, and account for the voltage and current limitations of the RS-232 interface. The manufacturer states that MAX3232E devices are pin, package, and functionally compatible with the industry-standard MAX232, subject to verification of the exact ordering variant.
Typical uses include industrial serial consoles, data-acquisition equipment, point-of-sale systems, instrumentation, embedded-control links, and service interfaces. The 16-SOIC package is also convenient for repairs and redesigns of legacy RS-232 equipment because the family maintains compatibility with established MAX232-class interfaces.
When designing around this IC, confirm that the host UART uses the correct logic voltage and that the RS-232 cable is connected with the proper signal-to-ground relationship. Place the charge-pump capacitors and bypass capacitance close to their assigned pins, and keep connector protection and chassis-ground strategy separate from the sensitive receiver path.
This product page consolidates electrical characteristics, package information, documented drop-in alternatives, and application-focused design guidance. It also distinguishes verified ordering variants from broader MAX3232-family options so engineers can assess PCB reuse, channel count, temperature grade, and lifecycle requirements before approving a substitution.
直接替換替代品,適用於 MAX3232EEWE+TG1Z — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3232EEWE+TG1Z (相同外形與佔位) — 差異在於 Package.
MAX3232EEWE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232EIDR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ECDR
✅ 直接替換聯絡詢價
查看資料表 →MAX3232EEUE+
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3227EEAE/V+T
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3232EEWE+TG1Z 規格
| Transceiver Configuration | 2 transmitters and 2 receivers |
| 介面類型 | Full RS-232 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| ESD Protection | ±15kV |
| Low Supply Current | Down to 10nA |
| 封裝 | 16-SOIC |
| 安裝類型 | Surface mount |
| 腳位數 | 16 pins |
MAX3232EEWE+TG1Z 16-soic 腳位配置指南
MAX3232EEWE+TG1Z(16-soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3232EEWE+TG1Z.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3232EEWE+TG1Z 適用於 6 應用s: Industrial Serial Console, Point-of-Sale Terminal Interface, Data-Acquisition Equipment, Embedded Control Communication, Test and Measurement Instrumentation, Service and Configuration Port.
Industrial Serial Console
The MAX3232EEWE+TG1Z fits legacy RS-232 console connections because it provides two transmitters, two receivers, a 3.0V to 5.5V supply range, and operation up to 1Mbps. Place the IC between the equipment UART and a DB9 or terminal connector, then use the manufacturer charge-pump capacitor arrangement to generate true RS-232 levels. Its ±15kV ESD rating is particularly relevant where the connector is exposed to user-contact discharge. The 16-SOIC package is also suitable for repairing or updating instruments that originally used MAX232-compatible interfaces. Final layout review should account for the exact pinout, ground-return strategy, and any isolation or surge-protection components required by the installation environment.
推薦
Point-of-Sale Terminal Interface
Point-of-sale equipment commonly relies on RS-232 links for service consoles, printers, scanners, and local configuration tools. The MAX3232EEWE+TG1Z offers the required two-driver, two-receiver arrangement in a 16-SOIC package, while its 3.0V to 5.5V operating range allows connection to modern 3.3V or 5V digital systems. The 1Mbps maximum data rate supports typical asynchronous serial traffic, and ±15kV ESD protection adds useful robustness at an accessible connector. In a point-of-sale product, keep the transceiver close to the connector and use a defined chassis or signal-ground strategy, because proper return-path design remains essential for reliable communication over longer RS-232 cables.
推薦
Data-Acquisition Equipment
The MAX3232EEWE+TG1Z can connect laboratory and industrial data-acquisition equipment to a host computer over RS-232. Two transmit and two receive channels support bidirectional control and status exchanges without requiring a larger multi-channel transceiver. Its low-voltage 3.0V to 5.5V supply operation suits embedded control systems, and the up-to-1Mbps capability provides margin beyond many legacy instrument baud rates. The interface is not isolated, so installations with long cables, different ground potentials, or high-noise environments may need external isolation. For such systems, retain the MAX3232E near the logic side of the connector and evaluate whether added surge, isolation, or common-mode protection changes the ESD design.
推薦
Embedded Control Communication
The MAX3232EEWE+TG1Z provides a straightforward bridge between an embedded controller's UART and a true RS-232 peer. A single 3.0V to 5.5V supply powers the interface, while the integrated charge-pump circuitry produces the required bipolar transmit levels. The two-channel arrangement can support separate command and status paths, and the 1Mbps capability allows the design to be reused across several asynchronous serial baud rates. Because this is a non-isolated transceiver, verify the ground relationship between connected systems before deployment. The 16-SOIC package also makes it practical to add or repair an RS-232 port on an existing controller board without changing to a larger transceiver package.
推薦
Test and Measurement Instrumentation
Legacy oscilloscopes, spectrum analyzers, and bench instruments frequently expose RS-232 for remote commands and logged data. The MAX3232EEWE+TG1Z is suitable for a modern controller to recreate that interface because it combines two RS-232 transmitters, two receivers, 3.0V to 5.5V operation, and data rates up to 1Mbps in a 16-SOIC package. Its ±15kV ESD protection is useful when users connect and disconnect cables, although the complete connector path still needs careful grounding and surge design. When replacing an older MAX232 implementation, compare the MAX3232E family pin and package compatibility statement with the exact board layout. Use the manufacturer reference circuit for charge-pump capacitor values and placement to avoid marginal operation.
推薦
Service and Configuration Port
A dedicated service or configuration port gives technicians a way to update equipment, retrieve diagnostics, and run production tests. The MAX3232EEWE+TG1Z implements two RS-232 transmit channels and two receive channels, allowing one port to handle both command traffic and equipment status. Its 3.0V to 5.5V supply range supports embedded logic operating at 3.3V or 5V, while the maximum 1Mbps rate provides broad compatibility with established asynchronous protocols. The ESD-protected interface is useful at a connector that maintenance personnel can access. Keep the UART traces short, place decoupling and charge-pump capacitors close to the IC, and provide a consistent signal-ground reference between the host and target equipment to minimize communication errors.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3232EEWE+TG1Z — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3232EEWE+ | MAX3232EIDR | MAX3232ECDR | MAX3232EEUE+ | MAX3227EEAE/V+T |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Interface Type | Full RS-232 | Full RS-232 | RS-232 | RS-232 | Full RS-232 | RS-232 |
主要差異化特點
- Documented MAX232 family compatibility (對比MAX3232EIDR)
- Higher data-rate capability than conventional legacy RS-232 links (對比MAX3232EEWE+)
- Defined ESD protection for connector-adjacent use (對比MAX3227EEAE/V+T)
設計說明
Place the charge-pump capacitors directly across the pins and terminals specified by the Analog Devices MAX3232E datasheet. Keep the associated ground and supply paths short, place supply bypassing at the device, and route the charge-pump nodes away from UART receive traces where practical. Correct capacitor placement preserves startup behavior and minimizes coupling from the switched-capacitor voltage generator into sensitive receive channels.
Do not treat the MAX3232E family compatibility statement as permission to ignore the exact ordering suffix. MAX3232EEWE+TG1Z, MAX3232EIDR, MAX3232ECDR, and MAX3232EEUE+ can differ in package details, temperature grade, or production configuration. Before substitution, compare the complete ordering table, 16-SOIC dimensions, pin names, temperature range, ESD conditions, and lifecycle status against the original design.
The RS-232 interface is non-isolated, so connector grounding determines noise and reliability. Route the transceiver interface according to the manufacturer reference layout, provide a continuous return path, and keep the logic-side ground and UART traces away from high-current switching nodes. For long cables or systems with large ground-potential differences, evaluate an external isolation or surge-protection solution rather than relying on the IC's ±15kV ESD rating alone.
合規資訊
The product listing does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The IC is not an automotive-qualified component unless the exact ordering code is separately documented as AEC-Q100 qualified.