Texas Instruments

MAX3232IPWG4 - RS-232 Transceiver | Texas Instruments

MPN: MAX3232IPWG4 ✓ Nakahanda
3 V to 5.5 V Vdss 1.6 A as listed by Partstack Id 16-pin TSSOP Package
MOQ: 1 |

MAX3232IPWG4 Ulas

Texas Instruments MAX3232IPWG4 is a multichannel RS-232 line driver and receiver IC with 3 V to 5.5 V single-supply operation, integrated charge-pump voltage conversion, and ±15 kV ESD protection. The device provides two transmit channels and two receive channels in a 16-pin TSSOP package, making it suitable for industrial serial interfaces, data acquisition equipment, and embedded control systems. Its receiver includes enhanced ESD protection and fail-safe operation, while the transmitters support RS-232 signal levels from a low-voltage digital supply.

An RS-232 transceiver combines a line driver, line receiver, and level-shifting charge-pump circuit in one package. The driver converts low-voltage logic signals into RS-232-compatible levels, while the receiver converts bipolar RS-232 signals back into CMOS-compatible logic. This integration reduces external circuitry, simplifies system design, and is especially useful when the host interface operates at 3.3 V or 5 V but the connected equipment requires RS-232 voltage levels.

The MAX3232IPWG4 operates across a 3 V to 5.5 V supply range, allowing use with both 3.3 V and 5 V systems. Its multichannel architecture supports two RS-232 transmit and two receive functions in one 16-terminal TSSOP package. The integrated charge pump generates the positive and negative voltage levels required by RS-232 without a separate negative supply, and the integrated protection circuitry helps improve robustness when ports are exposed to electrostatic discharge.

The part is specified for an industrial operating temperature range of -40 °C to +85 °C and uses a 0.65 mm terminal pitch. Its 16-pin TSSOP construction supports compact PCB layouts while preserving enough pin density for two full-duplex RS-232 channels. The MAX3232IPWG4 is also associated with a ±15 kV ESD-protection feature in the device family documentation, making it a practical choice for equipment interfaces exposed to cable transients.

Typical applications include serial adapters, industrial controllers, test equipment, point-of-sale terminals, embedded instrumentation, and communication links between a low-voltage processor and an RS-232 peripheral. Designers should provide the external charge-pump capacitors and, where required, the recommended driver and receiver bypass capacitors at the pins specified by the manufacturer datasheet. Keep the RS-232 traces short, route them away from sensitive clock and analog signals, and connect the protection ground arrangement as recommended for the application.

The MAX3232 family also includes an improved MAX3232E replacement recommended by Texas Instruments for new designs. Engineers evaluating alternatives should compare supply range, channel count, ESD rating, logic levels, package, and capacitor requirements before approving a substitution. This page combines device specifications, replacement guidance, package information, and practical interface-design considerations for faster engineering selection.

Mga alternatibo na pwedeng ilagay na MAX3232IPWG4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3232IPWG4 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, External Capacitors, Interface Standard, Maximum Data Rate.

Texas Instruments
Package: 16-SOIC (0.154 inch, 3.90 mm width)
Product Type: Dual RS-232 line driver/receiver transceiver
Interface Standard: RS-232
Ikabit sa MAX3232IPWG4 →
Texas Instruments
Package: 16-TSSOP (0.173 in, 4.40 mm width)
External Capacitors: 4 x 0.1 uF charge pump
Ikabit sa MAX3232IPWG4 →
Texas Instruments
Package: 16-pin SOIC
Product Type: 2/2 RS-232 line driver and receiver
External Capacitors: 4 × 0.1 µF
Ikabit sa MAX3232IPWG4 →

MAX3232EIPWG4

✅ Drop-In
Texas Instruments
📦 TSSOP-16
RS-232 Line Driver/Receiver · 2 · 2 · 3 V to 5.5 V · 250 kbps · +/-15 kV · +/-8 kV · +/-15 kV

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232ID

✅ Drop-In
Texas Instruments
📦 TSSOP-16
2/2 RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbit/s · 2 · 2 · ±15 kV · 300 µA · 5 V logic

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232EID

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Texas Instruments
📦 TSSOP-16
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3232IPWG4 Mga Spesipikasyon

Product Type RS-232 line transceiver
Number of Transmit Channels 2
Number of Receive Channels 2
Supply Voltage Range 3 V to 5.5 V
Maximum Supply Voltage 3.6 V as listed by Partstack
ESD Protection ±15 kV
Hanay ng Temperature na Operasyon -40 °C to +85 °C
Packhaging 16-pin TSSOP
Terminal Pitch 0.65 mm
Number of Terminals 16
Terminal Form Gull wing
Uri ng Pagpapasok Surface mount
Maximum Output Low Current 1.6 A as listed by Partstack
Operating Grade Industrial
Package Shape Rectangular
Marking Code MB3232I

Gabay sa Pin Configuration ng MAX3232IPWG4 rectangular

Pin configuration para sa MAX3232IPWG4 (rectangular package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng rectangular package para sa MAX3232IPWG4

Wala ng detalyadong pinout data na magagamit para sa MAX3232IPWG4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3232IPWG4 ay nararapat para sa 6 aplikasyons: Industrial Serial Controllers, Test and Measurement Equipment, Data Acquisition Systems, Embedded Service Interfaces, Point-of-Sale Terminals, Communication Port Concentrators.

🏭

Industrial Serial Controllers

The MAX3232IPWG4 fits industrial controllers that expose an RS-232 port while the main controller operates from a 3.3 V or 5 V rail. Its two transmitters and two receivers support multiple serial signals in one 16-pin TSSOP package, and the -40 °C to +85 °C industrial temperature range covers demanding equipment environments. The integrated charge pump avoids a separate negative supply, while ±15 kV ESD protection improves robustness at connector-facing pins. Place the manufacturer-recommended capacitors close to the charge-pump and supply pins, and route the RS-232 traces away from sensitive control circuitry.

🔧

Test and Measurement Equipment

The MAX3232IPWG4 is appropriate for test and measurement instruments that need to communicate with legacy RS-232 equipment through a low-voltage controller. The 3 V to 5.5 V supply range supports embedded processors and programmable controllers, while two transmit and two receive channels allow multiple directions of communication without separate level-shifting ICs. Its industrial temperature range supports equipment used in varied ambient conditions. The ±15 kV ESD feature helps protect the interface when users connect external cables. Maintain short, controlled-impedance RS-232 traces and provide the charge-pump capacitors specified in the manufacturer application circuit.

🖥️

Data Acquisition Systems

The MAX3232IPWG4 can connect data-acquisition equipment to a host computer or controller using an RS-232 port. Two receiver channels support incoming measurements or status signals, while two driver channels support command and control traffic. The integrated charge pump allows operation from 3.3 V or 5 V system power, reducing the need for a dedicated RS-232 power circuit. The TSSOP-16 package preserves board area, and the industrial temperature specification supports dependable operation across -40 °C to +85 °C. Place bypass and charge-pump capacitors directly at their associated pins to minimize supply disturbance and improve interface stability.

🔧

Embedded Service Interfaces

The MAX3232IPWG4 is suitable for embedded systems that must service configuration ports, diagnostic connectors, or legacy peripherals. A 3.3 V processor can communicate through the transceiver's logic-compatible interface, while the charge pump supplies the positive and negative levels required by RS-232. The industrial-grade temperature range makes the device useful in equipment where ambient conditions vary. Its two-channel transmit and receive structure can consolidate several RS-232 signals into one compact package. Use the exact manufacturer pin assignments, preserve the recommended capacitor spacing, and keep external cable routing isolated from precision analog or high-speed digital nets.

🖥️

Point-of-Sale Terminals

Point-of-sale terminals often combine a low-voltage embedded controller with an RS-232 peripheral such as a printer, scanner, or display. The MAX3232IPWG4 provides two transmit and two receive channels in a 16-pin TSSOP package, allowing several RS-232 signals to share a compact board area. Operation from 3 V to 5.5 V aligns with common controller platforms, and the integrated charge pump removes the need for a separate negative supply. The ±15 kV ESD rating adds useful protection for externally accessible ports. Follow the recommended capacitor network and place connector-side protection consistently with the equipment's grounding strategy.

🌐

Communication Port Concentrators

The MAX3232IPWG4 can provide RS-232 termination in port concentrators and interface adapters that aggregate legacy serial links. Two full RS-232 channel directions support command and response traffic while the low-voltage supply range allows direct use with modern interface logic. Its 16-pin TSSOP package provides a compact implementation, and the -40 °C to +85 °C rating suits industrial enclosures with controlled airflow. The integrated ±15 kV ESD protection is valuable when the interface connects to longer external cables. Keep charge-pump traces compact, provide adequate ground return, and separate RS-232 routing from sensitive clock and analog signals.

What is the MAX3232IPWG4?
The MAX3232IPWG4 is a Texas Instruments RS-232 line transceiver with two transmit channels and two receive channels. According to the manufacturer datasheet, it operates from a 3 V to 5.5 V single supply and provides ±15 kV ESD protection. The device is packaged in a 16-pin TSSOP with a 0.65 mm terminal pitch, making it suitable for compact equipment using low-voltage CMOS logic.
What are the key specifications of MAX3232IPWG4?
The MAX3232IPWG4 combines two RS-232 drivers and two RS-232 receivers with integrated level-shifting circuitry. According to the Texas Instruments datasheet, its supply range is 3 V to 5.5 V and its ESD protection is rated at ±15 kV. The industrial temperature range is -40 °C to +85 °C, and the package is a 16-pin TSSOP with 0.65 mm pitch.
What is the operating voltage of MAX3232IPWG4?
The MAX3232IPWG4 operates from 3 V to 5.5 V, allowing it to interface with both 3.3 V and 5 V digital systems. According to the Texas Instruments MAX3232 datasheet, the on-chip charge pump develops the bipolar voltage levels required for RS-232 transmission. The external capacitor values and placement should follow the datasheet's recommended application circuit.
Where can I download the MAX3232IPWG4 datasheet PDF?
The official MAX3232IPWG4 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/max3232.pdf. It contains the electrical characteristics, pin description, typical application circuit, capacitor recommendations, ESD information, and operating limits for the MAX3232 family. Use the pin-description table when assigning PCB nets.
Where can I find the MAX3232IPWG4 pinout?
The MAX3232IPWG4 pinout is shown in the Texas Instruments MAX3232 datasheet at https://www.ti.com/lit/ds/symlink/max3232.pdf. The device uses a 16-pin TSSOP package with a 0.65 mm terminal pitch. Consult the datasheet pin-description table for the exact driver, receiver, charge-pump, and supply connections before finalizing the PCB.
Is MAX3232IPWG4 suitable for 3.3 V systems?
Yes, the MAX3232IPWG4 is suitable for 3.3 V systems because its specified single-supply operating range is 3 V to 5.5 V. According to the manufacturer datasheet, the integrated charge pump provides the bipolar levels required by RS-232 while the logic side remains compatible with low-voltage CMOS systems. Confirm input and output logic levels for the connected host controller.
What is the difference between MAX3232IPWG4 and MAX3232E?
The MAX3232E is the improved MAX3232-family option that Texas Instruments recommends for new designs, while the MAX3232IPWG4 is the original-family part in a 16-pin TSSOP package. According to the manufacturer comparison information, the MAX3232E is a direct drop-in replacement for the MAX3232. Verify the exact ordering code, package, and capacitor requirements before substitution.
Can MAX3232E replace MAX3232IPWG4?
Yes, the MAX3232E is identified by Texas Instruments as an improved direct drop-in replacement for the MAX3232. The replacement should use the corresponding 16-pin TSSOP ordering code to preserve the PCB footprint. Review the manufacturer comparison table for any changes in electrical limits, ESD performance, or application requirements.
What can replace MAX3232IPWG4?
The MAX3232E is the clearest drop-in replacement for the MAX3232IPWG4 because Texas Instruments identifies it as an improved direct replacement. Pin compatibility and exact ordering suffix must be confirmed before release. The MAX3227EEAE/V+T has a different package and is not a direct replacement for the 16-pin TSSOP footprint.
What is the best equivalent for MAX3232IPWG4?
The best equivalent depends on whether the design requires the original MAX3232 or the improved MAX3232E. Texas Instruments specifically identifies MAX3232E as an improved direct drop-in replacement. It must use the matching 16-pin TSSOP variant to maintain footprint compatibility. A second source should also be checked for supply range, ESD rating, and capacitor requirements.
When should I choose MAX3232IPWG4 over MAX3232E?
Choose MAX3232IPWG4 when an existing design is already built around the original MAX3232 and its manufacturer-defined electrical limits are satisfied. Choose MAX3232E for new designs when the improved family version is preferred. The manufacturer comparison information identifies MAX3232E as the recommended option for new designs.
Is MAX3232IPWG4 suitable for industrial equipment?
Yes, MAX3232IPWG4 is identified as an industrial-grade RS-232 transceiver with an operating temperature range of -40 °C to +85 °C. Its ±15 kV ESD protection helps improve interface robustness. The industrial temperature rating does not by itself establish AEC-Q100 qualification or every regulatory certification.
Where can I buy MAX3232IPWG4 online?
Use the Request a Quote form on this page to request current availability, lead time, and order confirmation for MAX3232IPWG4. The manufacturer ordering code includes a 16-pin TSSOP package and tape-and-reel packaging. The current commercial status should be confirmed through the quotation process before production scheduling.
What is the price of MAX3232IPWG4?
Request a current quotation for MAX3232IPWG4 through the Request a Quote form on this page. Commercial pricing can vary with order quantity, availability, and configuration, so the quote request provides the appropriate channel for a transaction-ready response. Use the exact MAX3232IPWG4 ordering code when requesting supply.
What is the lead time for MAX3232IPWG4?
The current lead time for MAX3232IPWG4 should be confirmed through the Request a Quote form on this page. Lead time can vary with inventory, order volume, date code, and fulfillment requirements. Include your requested quantity, target delivery date, and any automotive or industrial qualification requirements in the request.
Is MAX3232IPWG4 in stock?
Current stock for MAX3232IPWG4 should be confirmed through the Request a Quote form on this page. Include the required quantity and target delivery date so XAIPART can return an availability and lead-time response for the exact 16-pin TSSOP ordering code.

Impormasyon ng Talumpati sa Engineering for MAX3232IPWG4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3232IPWG4 when maintaining an existing MAX3232-based design, when the board already uses its 16-pin TSSOP footprint, and when the original-family electrical limits meet the application requirements. Choose MAX3232EIPW for a new design when you want the improved MAX3232E family that Texas Instruments identifies as the recommended direct replacement. MAX3232ID is suitable when the exact ordering suffix and channel arrangement match the existing board. MAX3232EID provides the same general family positioning for another ordering configuration, subject to footprint and suffix verification. Avoid using MC1489 or MC1488-family parts as direct replacements because their driver-only architectures and external requirements differ. For every substitution, confirm pin assignments, supply range, temperature grade, ESD rating, logic thresholds, and charge-pump capacitor values.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3232EIPW MAX3232ID MAX3232EID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-16 TSSOP-16 TSSOP-16 TSSOP-16
Product Type RS-232 line transceiver RS-232 line transceiver RS-232 line transceiver RS-232 line transceiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Transmit Channels 2 2 2 2
Receive Channels 2 2 2 2
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Integrated Charge Pump Yes Yes Yes Yes
Recommended for New Designs Original MAX3232 family Improved MAX3232E family Original MAX3232 family Improved MAX3232E family

Pangunahing mga Pagkakaiba

  • Two full-duplex RS-232 channels in a compact package (kumpara saMC1489NG4)
  • Single-supply operation supports modern logic levels (kumpara saMC1488NE4)
  • Improved manufacturer-recommended family alternative (kumpara saMAX3232EIPW)

Talaan ng Disenyo

Place the charge-pump capacitors and supply bypass capacitors directly beside their associated MAX3232IPWG4 pins. Keep these loops short and provide a low-impedance ground return. The external capacitor network is part of the device's operating characteristics, so use the values and placement shown in the Texas Instruments datasheet rather than substituting capacitors solely by capacitance.

Route RS-232 driver and receiver nets away from sensitive clock, reset, and analog inputs. Maintain a continuous ground path beneath or beside the interface where the board stack-up permits, and keep connector-side surge and ESD protection paths away from sensitive logic. The MAX3232IPWG4 includes ±15 kV ESD protection, but layout still determines how effectively transient energy reaches the device pins.

Do not treat MAX3232E as an automatic substitute without checking the exact ordering suffix and footprint. Texas Instruments identifies MAX3232E as an improved direct replacement for MAX3232, but engineers must still verify package dimensions, temperature grade, channel assignments, logic levels, and external capacitor requirements. Also verify that the selected part number includes the required TSSOP-16 configuration.

RS-232 edge rates can produce reflected waves on long cables even when the data rate is moderate. Match the interface according to the manufacturer's recommendations, keep the cable route away from high-current switching paths, and use a solid ground reference. If the port connects to noisy industrial equipment, confirm that the protection strategy does not degrade signal integrity or introduce excessive ground current.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The device is identified as industrial grade, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status appears in the listed technical data. AEC-Q100 is not applicable to this non-automotive interface IC unless a separately qualified automotive ordering variant is selected.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3232IPWG4 datasheet MAX3232IPWG4 pinout MAX3232IPWG4 datasheet pdf MAX3232IPWG4 replacement MAX3232IPWG4 equivalent MAX3232IPWG4 footprint MAX3232IPWG4 price MAX3232IPWG4 stock Texas Instruments MAX3232IPWG4 MAX3232IPWG4 vs MAX3232EIPW MAX3232IPWG4 RS-232 application MAX3232 TSSOP-16 pinout

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments MAX3232IPWG4 MAX3232EIPW MAX3232ID MAX3232EID RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC serial interface CMOS logic charge-pump voltage converter ESD protection TSSOP-16 TSSOP package family surface-mount package industrial temperature grade 3.3 V logic 5 V logic bipolar RS-232 signal electrostatic discharge RS-232 port Texas Instruments MAX3232 datasheet MAX3232E RS-232
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ