MAX3232IPWG4 - RS-232 Transceiver | Texas Instruments
MPN: MAX3232IPWG4 ✓ Hoạt độngMAX3232IPWG4 Tóm tắt
An RS-232 transceiver combines a line driver, line receiver, and level-shifting charge-pump circuit in one package. The driver converts low-voltage logic signals into RS-232-compatible levels, while the receiver converts bipolar RS-232 signals back into CMOS-compatible logic. This integration reduces external circuitry, simplifies system design, and is especially useful when the host interface operates at 3.3 V or 5 V but the connected equipment requires RS-232 voltage levels.
The MAX3232IPWG4 operates across a 3 V to 5.5 V supply range, allowing use with both 3.3 V and 5 V systems. Its multichannel architecture supports two RS-232 transmit and two receive functions in one 16-terminal TSSOP package. The integrated charge pump generates the positive and negative voltage levels required by RS-232 without a separate negative supply, and the integrated protection circuitry helps improve robustness when ports are exposed to electrostatic discharge.
The part is specified for an industrial operating temperature range of -40 °C to +85 °C and uses a 0.65 mm terminal pitch. Its 16-pin TSSOP construction supports compact PCB layouts while preserving enough pin density for two full-duplex RS-232 channels. The MAX3232IPWG4 is also associated with a ±15 kV ESD-protection feature in the device family documentation, making it a practical choice for equipment interfaces exposed to cable transients.
Typical applications include serial adapters, industrial controllers, test equipment, point-of-sale terminals, embedded instrumentation, and communication links between a low-voltage processor and an RS-232 peripheral. Designers should provide the external charge-pump capacitors and, where required, the recommended driver and receiver bypass capacitors at the pins specified by the manufacturer datasheet. Keep the RS-232 traces short, route them away from sensitive clock and analog signals, and connect the protection ground arrangement as recommended for the application.
The MAX3232 family also includes an improved MAX3232E replacement recommended by Texas Instruments for new designs. Engineers evaluating alternatives should compare supply range, channel count, ESD rating, logic levels, package, and capacitor requirements before approving a substitution. This page combines device specifications, replacement guidance, package information, and practical interface-design considerations for faster engineering selection.
Bộ thay thế dễ dàng lắp đặt cho MAX3232IPWG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3232IPWG4 (cùng hình factor và footprint) — khác nhau ở Package, Product Type, External Capacitors, Interface Standard, Maximum Data Rate.
MAX3232EIPWG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232ID
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232EID
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MAX3232IPWG4 Thông số kỹ thuật
| Product Type | RS-232 line transceiver |
| Number of Transmit Channels | 2 |
| Number of Receive Channels | 2 |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Supply Voltage | 3.6 V as listed by Partstack |
| ESD Protection | ±15 kV |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Hộp | 16-pin TSSOP |
| Terminal Pitch | 0.65 mm |
| Number of Terminals | 16 |
| Terminal Form | Gull wing |
| Kiểu lắp đặt | Surface mount |
| Maximum Output Low Current | 1.6 A as listed by Partstack |
| Operating Grade | Industrial |
| Package Shape | Rectangular |
| Marking Code | MB3232I |
Hướng dẫn cấu hình chân MAX3232IPWG4 rectangular
Cấu hình chân cho MAX3232IPWG4 (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3232IPWG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3232IPWG4 phù hợp cho 6 Áp dụngs: Industrial Serial Controllers, Test and Measurement Equipment, Data Acquisition Systems, Embedded Service Interfaces, Point-of-Sale Terminals, Communication Port Concentrators.
Industrial Serial Controllers
The MAX3232IPWG4 fits industrial controllers that expose an RS-232 port while the main controller operates from a 3.3 V or 5 V rail. Its two transmitters and two receivers support multiple serial signals in one 16-pin TSSOP package, and the -40 °C to +85 °C industrial temperature range covers demanding equipment environments. The integrated charge pump avoids a separate negative supply, while ±15 kV ESD protection improves robustness at connector-facing pins. Place the manufacturer-recommended capacitors close to the charge-pump and supply pins, and route the RS-232 traces away from sensitive control circuitry.
Được đề xuất
Test and Measurement Equipment
The MAX3232IPWG4 is appropriate for test and measurement instruments that need to communicate with legacy RS-232 equipment through a low-voltage controller. The 3 V to 5.5 V supply range supports embedded processors and programmable controllers, while two transmit and two receive channels allow multiple directions of communication without separate level-shifting ICs. Its industrial temperature range supports equipment used in varied ambient conditions. The ±15 kV ESD feature helps protect the interface when users connect external cables. Maintain short, controlled-impedance RS-232 traces and provide the charge-pump capacitors specified in the manufacturer application circuit.
Được đề xuất
Data Acquisition Systems
The MAX3232IPWG4 can connect data-acquisition equipment to a host computer or controller using an RS-232 port. Two receiver channels support incoming measurements or status signals, while two driver channels support command and control traffic. The integrated charge pump allows operation from 3.3 V or 5 V system power, reducing the need for a dedicated RS-232 power circuit. The TSSOP-16 package preserves board area, and the industrial temperature specification supports dependable operation across -40 °C to +85 °C. Place bypass and charge-pump capacitors directly at their associated pins to minimize supply disturbance and improve interface stability.
Được đề xuất
Embedded Service Interfaces
The MAX3232IPWG4 is suitable for embedded systems that must service configuration ports, diagnostic connectors, or legacy peripherals. A 3.3 V processor can communicate through the transceiver's logic-compatible interface, while the charge pump supplies the positive and negative levels required by RS-232. The industrial-grade temperature range makes the device useful in equipment where ambient conditions vary. Its two-channel transmit and receive structure can consolidate several RS-232 signals into one compact package. Use the exact manufacturer pin assignments, preserve the recommended capacitor spacing, and keep external cable routing isolated from precision analog or high-speed digital nets.
Được đề xuất
Point-of-Sale Terminals
Point-of-sale terminals often combine a low-voltage embedded controller with an RS-232 peripheral such as a printer, scanner, or display. The MAX3232IPWG4 provides two transmit and two receive channels in a 16-pin TSSOP package, allowing several RS-232 signals to share a compact board area. Operation from 3 V to 5.5 V aligns with common controller platforms, and the integrated charge pump removes the need for a separate negative supply. The ±15 kV ESD rating adds useful protection for externally accessible ports. Follow the recommended capacitor network and place connector-side protection consistently with the equipment's grounding strategy.
Được đề xuất
Communication Port Concentrators
The MAX3232IPWG4 can provide RS-232 termination in port concentrators and interface adapters that aggregate legacy serial links. Two full RS-232 channel directions support command and response traffic while the low-voltage supply range allows direct use with modern interface logic. Its 16-pin TSSOP package provides a compact implementation, and the -40 °C to +85 °C rating suits industrial enclosures with controlled airflow. The integrated ±15 kV ESD protection is valuable when the interface connects to longer external cables. Keep charge-pump traces compact, provide adequate ground return, and separate RS-232 routing from sensitive clock and analog signals.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3232IPWG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3232EIPW | MAX3232ID | MAX3232EID |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TSSOP-16 | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Product Type | RS-232 line transceiver | RS-232 line transceiver | RS-232 line transceiver | RS-232 line transceiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Transmit Channels | 2 | 2 | 2 | 2 |
| Receive Channels | 2 | 2 | 2 | 2 |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Integrated Charge Pump | Yes | Yes | Yes | Yes |
| Recommended for New Designs | Original MAX3232 family | Improved MAX3232E family | Original MAX3232 family | Improved MAX3232E family |
Bảo phân biệt quan trọng
- Two full-duplex RS-232 channels in a compact package (vsMC1489NG4)
- Single-supply operation supports modern logic levels (vsMC1488NE4)
- Improved manufacturer-recommended family alternative (vsMAX3232EIPW)
Ghi chú thiết kế
Place the charge-pump capacitors and supply bypass capacitors directly beside their associated MAX3232IPWG4 pins. Keep these loops short and provide a low-impedance ground return. The external capacitor network is part of the device's operating characteristics, so use the values and placement shown in the Texas Instruments datasheet rather than substituting capacitors solely by capacitance.
Route RS-232 driver and receiver nets away from sensitive clock, reset, and analog inputs. Maintain a continuous ground path beneath or beside the interface where the board stack-up permits, and keep connector-side surge and ESD protection paths away from sensitive logic. The MAX3232IPWG4 includes ±15 kV ESD protection, but layout still determines how effectively transient energy reaches the device pins.
Do not treat MAX3232E as an automatic substitute without checking the exact ordering suffix and footprint. Texas Instruments identifies MAX3232E as an improved direct replacement for MAX3232, but engineers must still verify package dimensions, temperature grade, channel assignments, logic levels, and external capacitor requirements. Also verify that the selected part number includes the required TSSOP-16 configuration.
RS-232 edge rates can produce reflected waves on long cables even when the data rate is moderate. Match the interface according to the manufacturer's recommendations, keep the cable route away from high-current switching paths, and use a solid ground reference. If the port connects to noisy industrial equipment, confirm that the protection strategy does not degrade signal integrity or introduce excessive ground current.
Thông tin tuân thủ
The device is identified as industrial grade, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status appears in the listed technical data. AEC-Q100 is not applicable to this non-automotive interface IC unless a separately qualified automotive ordering variant is selected.