Analog Devices

MAX3243ECAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices

MPN: MAX3243ECAI+G1Z ✓ Nakahanda
3.0 V to 5.5 V Vdss Approximately 1 uA Id 28-pin SSOP Package
MOQ: 1 |

MAX3243ECAI+G1Z Ulas

The Analog Devices MAX3243ECAI+G1Z is a 3-driver, 5-receiver RS-232 transceiver operating from 3.0 V to 5.5 V, supporting data rates up to 250 kbps in a 28-pin SSOP package. It combines three EIA/TIA-232 transmitters, five receivers, automatic shutdown and wake-up behavior, and enhanced electrostatic-discharge protection for robust serial-interface designs.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential-voltage RS-232 levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the signal-chain hierarchy, the MAX3243 belongs to the RS-232 interface transceiver family, within interface ICs and broader communication semiconductors. Its multi-channel organization allows one device to support several data and control lines while reducing package count and PCB area.

The MAX3243 family supports operation from 3.0 V to 5.5 V, enabling use in both 3.3 V and 5 V systems. Its maximum signaling rate is 250 kbps, and the on-board charge-pump transmitter circuitry provides the voltage levels required by RS-232 links. Automatic shutdown reduces supply current to approximately 1 microampere when no valid receiver activity is detected, while wake-up operation restores normal operation when a valid signal returns.

Enhanced ESD protection is a defining feature of this interface family. According to the manufacturer datasheet, transmitter outputs and receiver inputs are protected to plus or minus 15 kV using the IEC 1000-4-2 air-gap discharge test and to plus or minus 8 kV using the IEC 1000-4-2 contact-discharge test. These ratings are relevant for cables exposed to electrostatic discharge, although the complete system still requires suitable grounding and board-layout practices.

Typical applications include industrial serial-port equipment, data-acquisition systems, instrumentation, point-of-sale terminals, and embedded control modules that need several RS-232 channels. The three transmitters support outbound data, modem-control, or handshake signals, while the five receivers support inbound data, status, and monitoring lines. The complementary always-active receiver provides external monitoring when the main receiver circuitry is shut down.

When implementing the MAX3243ECAI+G1Z, follow the manufacturer pin-description and typical-application circuits for supply bypassing, charge-pump capacitors, and connector-side protection. Keep RS-232 traces away from sensitive analog signals, provide a low-impedance ground path, and verify that every connected cable signal remains within the device's absolute-maximum ratings.

This product data combines manufacturer specifications, package and channel-count details, application guidance, and verified drop-in alternatives. It also highlights the differences that matter when deciding whether another MAX3243 order code can replace the target without changing the PCB footprint.

Mga alternatibo na pwedeng ilagay na MAX3243ECAI+G1Z — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3243ECAI+G1Z (parehas na form factor at footprint) — pagkakaiba sa Interface Standard, Number of Receivers, Product Type, Supply Voltage Range.

Maxim Integrated
Interface Standard: EIA/TIA-232 and V.28/V.24
Number of Receivers: 5
Product Type: 3/5 RS-232 transceiver
Ikabit sa MAX3243ECAI+G1Z →

MAX3243CAI+G1Z

✅ Drop-In
Analog Devices
📦 28-pin SSOP
RS-232 interface transceiver · 3 drivers · 5 receivers · 3 V to 5.5 V · 1 uA · 250 kbps · +/-15 kV · 1 complementary receiver

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3243ECAI+

✅ Drop-In
Maxim Integrated
📦 28-pin SSOP
3/5 RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 · 5 · EIA/TIA-232 and V.28/V.24 · Yes · Yes

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3243ECAI+G1Z Mga Spesipikasyon

Product Type RS-232 transceiver
Number of Transmitters 3 drivers
Number of Receivers 5 receivers
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
Automatic Shutdown Supply Current Approximately 1 uA
Transmitter and Receiver ESD Protection, Air Gap +/-15 kV
Transmitter and Receiver ESD Protection, Contact +/-8 kV
Interface Standard EIA/TIA-232, V.28, and V.24
Packhaging 28-pin SSOP
Uri ng Pagpapasok Surface mount
Automatic Shutdown Yes
Automatic Wake-Up Yes
Complementary Always-Active Receiver Yes

Gabay sa Pin Configuration ng MAX3243ECAI+G1Z 28-pin ssop

Pin configuration para sa MAX3243ECAI+G1Z (28-pin ssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 28-pin ssop package para sa MAX3243ECAI+G1Z

Wala ng detalyadong pinout data na magagamit para sa MAX3243ECAI+G1Z.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3243ECAI+G1Z ay nararapat para sa 6 aplikasyons: Industrial Serial-Port Control, Data-Acquisition Equipment, Point-of-Sale Terminal Equipment, Embedded Instrumentation Interface, Automated Test and Measurement, Communication and Network Support Equipment.

🏭

Industrial Serial-Port Control

The MAX3243ECAI+G1Z fits industrial serial-port control equipment that must translate between a UART and multiple RS-232 lines at rates up to 250 kbps. Its three transmitters can carry outbound data and modem-control signals, while five receivers support inbound status and monitoring signals. Running from 3.0 V to 5.5 V also allows integration with both 3.3 V embedded controllers and 5 V legacy equipment. Automatic shutdown is useful when a connection is infrequently active because the interface supply current can fall to approximately 1 microampere until a valid receiver signal wakes the device.

📟

Data-Acquisition Equipment

For laboratory and industrial data-acquisition equipment, the MAX3243ECAI+G1Z provides three RS-232 transmit channels and five receive channels on a single 28-pin SSOP device. The 250 kbps maximum signaling rate supports moderate-speed command, status, and measurement-data links, while the 3.0 V to 5.5 V supply range supports modern mixed-voltage systems. Enhanced component-level ESD ratings of plus or minus 15 kV air-gap and plus or minus 8 kV contact help protect exposed communication inputs, although cable routing and system grounding remain essential.

🖥️

Point-of-Sale Terminal Equipment

Point-of-sale terminals can use the MAX3243ECAI+G1Z to connect a host controller to several RS-232 peripherals through one compact interface. Three transmitters support command and control outputs, while five receivers support peripheral status and data inputs, reducing the number of separate level-shifting devices required. Its 28-pin SSOP package is suitable for space-constrained terminal electronics, and automatic shutdown helps limit power use when peripherals are disconnected or idle. The design should follow the manufacturer capacitor and layout guidance and include appropriate chassis-ground protection for externally accessible connectors.

🔧

Embedded Instrumentation Interface

The MAX3243ECAI+G1Z is suitable for embedded instrumentation that communicates through legacy RS-232 ports while running from a 3.3 V system. Its three-driver and five-receiver configuration supports command, status, and data paths without requiring one transceiver per line. Operation to 250 kbps covers common serial-control links, while automatic wake-up allows the interface to react when connected equipment resumes communication. Designers should verify UART levels, cable capacitance, and grounding, especially where the interface connects to long or externally accessible cables.

📊

Automated Test and Measurement

The MAX3243ECAI+G1Z can consolidate several RS-232 control paths in automated test and measurement equipment. A single 28-pin SSOP provides three outbound drivers and five inbound receivers, allowing a test controller to manage instrument commands, ready signals, and response data through one standardized interface. The 3.0 V to 5.5 V operating range supports mixed legacy and current logic systems, and the 250 kbps rate is adequate for many supervisory and status links. Keep sensitive measurement circuitry physically separated from connector-side traces and follow the manufacturer application circuit.

🌐

Communication and Network Support Equipment

The MAX3243ECAI+G1Z can serve as the local RS-232 interface in communication equipment, management controllers, and legacy network-support appliances. Its five receivers are useful for multiple control or diagnostic inputs, while the three transmitters support outbound command paths. Automatic shutdown and wake-up reduce standby consumption when the remote link is inactive, making the device suitable for intermittently used management ports. Because RS-232 is unbalanced and exposed to cabling hazards, use the specified bypass capacitors, short ground references, and appropriately located ESD protection in the final equipment.

What is the MAX3243ECAI+G1Z?
The MAX3243ECAI+G1Z is a 3.0 V to 5.5 V, 3-driver and 5-receiver RS-232 transceiver operating at up to 250 kbps. According to the Analog Devices MAX3243 product information, the family combines EIA/TIA-232, V.28, and V.24 interface functions with automatic shutdown, automatic wake-up, enhanced ESD protection, and a 28-pin SSOP package for the ECAI variant.
What are the key specifications of MAX3243ECAI+G1Z that engineers should know?
The MAX3243ECAI+G1Z provides three RS-232 transmitters, five receivers, a 3.0 V to 5.5 V supply range, and a maximum data rate of 250 kbps. According to the Analog Devices datasheet, transmitter outputs and receiver inputs support plus or minus 15 kV air-gap and plus or minus 8 kV contact ESD protection, while automatic shutdown reduces supply current to approximately 1 uA when no valid receiver signal is present.
Where can I download the MAX3243ECAI+G1Z datasheet PDF?
The MAX3243 family documentation is available through the official Analog Devices MAX3243 product page, which links to the manufacturer datasheet. The product is the ECAI lead-free 28-pin SSOP configuration with three transmitters and five receivers. Use the pin-description table, ordering information, and typical application circuits in that document when assigning PCB functions and external capacitors.
Where is the MAX3243ECAI+G1Z pinout located?
The MAX3243ECAI+G1Z pinout is shown in the pin-description and package diagrams within the Analog Devices MAX3243 datasheet. The ECAI configuration uses a 28-pin SSOP with three transmitter outputs, five receiver inputs, supply and ground connections, charge-pump nodes, enable control, and shutdown-related functions. Assign PCB nets directly from the manufacturer pin table rather than inferring functions from receiver or driver numbering.
What is the difference between RS-232 and a MAX3243ECAI+G1Z transceiver?
RS-232 is the communication standard defining bipolar voltage levels, while the MAX3243ECAI+G1Z is the integrated circuit that converts between those levels and CMOS-compatible logic. According to the Analog Devices datasheet, this device includes three transmitters, five receivers, 3.0 V to 5.5 V operation, data rates up to 250 kbps, automatic shutdown, and enhanced ESD protection in a 28-pin SSOP package.
Is MAX3243ECAI+G1Z suitable for 3.3 V systems?
Yes, the MAX3243ECAI+G1Z operates from 3.0 V to 5.5 V and is suitable for both 3.3 V and 5 V equipment. The Analog Devices product information identifies the MAX3243 as a 3 V-powered RS-232 interface. Confirm the logic-level thresholds and external capacitor values in the manufacturer datasheet for the specific system supply, UART, and operating conditions.
How much data can MAX3243ECAI+G1Z transmit?
The MAX3243ECAI+G1Z supports signaling rates up to 250 kbps under its specified operating conditions. According to the Analog Devices MAX3243 product page, the family provides high data-rate capability together with automatic shutdown and wake-up. Actual UART throughput depends on baud rate, parity, framing, cable characteristics, loading, and the host interface; use the datasheet timing and load limits during design verification.
Does MAX3243ECAI+G1Z include automatic shutdown and wake-up?
Yes, the MAX3243ECAI+G1Z includes automatic shutdown and automatic wake-up functions. According to the Analog Devices datasheet, the on-board power supply and drivers shut down when the receivers do not detect a valid signal level, reducing supply current to approximately 1 microampere. A valid incoming signal can then wake the interface, making this behavior useful for intermittently connected serial equipment.
What ESD protection does MAX3243ECAI+G1Z provide?
The MAX3243ECAI+G1Z provides enhanced ESD protection on all transmitter outputs and receiver inputs. According to the manufacturer datasheet, the specified protection reaches plus or minus 15 kV under IEC 1000-4-2 air-gap discharge and plus or minus 8 kV under IEC 1000-4-2 contact discharge. These are component-level test ratings and do not remove the need for good enclosure grounding, cable design, and system-level surge protection.
What can replace MAX3243ECAI+G1Z?
A suitable replacement must use the same 28-pin SSOP footprint and preserve the three-driver, five-receiver electrical arrangement. The closest identified order-code alternative is MAX3243CAI+G1Z, which retains the MAX3243 channel count and package architecture for an exact functional orientation. Verify the complete pin table, temperature grade, lifecycle status, and ESD requirements before approving any substitution.
Can MAX3243CAI+G1Z replace MAX3243ECAI+G1Z?
MAX3243CAI+G1Z is the closest identified same-package alternative because it belongs to the same MAX3243 3-driver, 5-receiver family and uses the 28-pin SSOP architecture. The available comparison identifies RoHS, REACH, series, package, and related attributes, but it does not expose every temperature or qualification difference. Compare the manufacturer ordering table and full datasheet before treating it as an unconditional replacement.
When should I choose MAX3243ECAI+G1Z over MAX3243ECAI+?
Choose the G1Z order code when the procurement specification requires that lead-free finish and the 28-pin SSOP configuration is retained. Both identifiers belong to the same MAX3243E family organization, and the available listing data shows the same 3.0 V to 5.5 V interface category. The decision should be based on the complete manufacturer order-code table, qualification grade, and assembly requirements rather than the suffix alone.
Is MAX3243ECAI+G1Z in stock?
Current inventory should be confirmed through the Request a Quote form on this page. The manufacturer product page remains active, while distributor availability can vary by order code and regional stock. Submit the exact MAX3243ECAI+G1Z identifier, target quantity, and delivery schedule with the quote request so the current manufacturing and fulfillment position can be confirmed.
Where can I buy MAX3243ECAI+G1Z online?
Use the Request a Quote form on this page to request the MAX3243ECAI+G1Z, including required quantity, shipment destination, and production schedule. The part is a 28-pin SSOP, three-transmitter, five-receiver RS-232 interface from Analog Devices. A quote request avoids ambiguity between MAX3243 order codes and lets the supplier confirm the exact package and current availability.
What is the lead time for MAX3243ECAI+G1Z?
Lead time for MAX3243ECAI+G1Z depends on current factory and fulfillment status. Request the current lead time through the Request a Quote form on this page, stating the required quantity and delivery date. The exact MAX3243ECAI+G1Z order code is important because similarly named MAX3243 variants can differ in package, temperature range, qualification, or production status.
What is the price of MAX3243ECAI+G1Z?
The current price for MAX3243ECAI+G1Z should be obtained through the Request a Quote form on this page. The quote request should identify the exact MPN, package, quantity, and shipment destination so pricing corresponds to the required order code rather than a related MAX3243 variant. Commercial terms and current availability should be confirmed at the same time.
MAX3243ECAI+G1Z vs MAX3243CAI+G1Z: which is better?
MAX3243ECAI+G1Z and MAX3243CAI+G1Z are closely related MAX3243 28-pin SSOP devices with three transmitters and five receivers. The published comparison highlights package, series, RoHS, and REACH attributes but does not provide enough complete ordering detail to establish that one supersedes the other. Choose based on the exact temperature range, qualification requirements, and manufacturer ordering information for the target design.

Impormasyon ng Talumpati sa Engineering for MAX3243ECAI+G1Z — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3243ECAI+G1Z when the design needs a compact RS-232 interface with three transmit channels, five receive channels, operation from 3.0 V to 5.5 V, and data rates up to 250 kbps. It is particularly suitable for industrial controllers, instrumentation, test equipment, and legacy connectivity products that benefit from automatic shutdown and wake-up. MAX3243CAI+G1Z is the closest same-package alternative when its manufacturer ordering characteristics satisfy the design; confirm temperature grade and qualification before release. MAX3243ECAI+ is appropriate when the procurement specification accepts that order-code finish. MAX3232EUE+T is not interchangeable because it offers only two receivers and a different package. MAX3237CAI+T also has a different receiver organization. For all alternatives, verify the complete pin table, external capacitor requirements, ESD rating, and lifecycle status before PCB substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3243CAI+G1Z MAX3243ECAI+
Brand Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP
Transmitters 3 3 3
Receivers 5 5 5
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps
Automatic Shutdown Supply Current Approximately 1 uA Approximately 1 uA Approximately 1 uA
ESD Protection, Air Gap +/-15 kV +/-15 kV +/-15 kV
ESD Protection, Contact +/-8 kV +/-8 kV +/-8 kV

Pangunahing mga Pagkakaiba

  • Five receivers provide more inbound monitoring channels than a two-receiver RS-232 interface (kumpara saMAX3232EUE+T)
  • Retains the full MAX3243 3-driver and 5-receiver channel organization (kumpara saMAX3237CAI+T)
  • Combines three drivers, five receivers, 3.0 V to 5.5 V operation, and 250 kbps signaling in one 28-pin SSOP (kumpara saMAX3243ECAI+)

Talaan ng Disenyo

Follow the manufacturer typical application circuit for the external charge-pump and bypass capacitors, and place each capacitor directly across its designated device pins with short ground returns. Avoid routing connector-side RS-232 traces beneath the package or between sensitive analog circuitry. Continuous ground-plane placement helps reduce radiated noise and improves the return path for ESD and cable transients.

Keep the three transmitter outputs and five receiver inputs physically separated from clocks, sensor lines, and precision analog inputs. RS-232 driver outputs are relatively high-voltage, edge-rate signals even though their data rate is moderate. Use the pin-description table to identify connector-facing nets, and check that the PCB edge, connector shield, and chassis-ground strategy satisfy the enclosure's ESD requirements.

Do not substitute a MAX3232 or MAX3237 merely because both are RS-232 interface ICs. MAX3232-class devices have a different channel count and package, while MAX3237-class devices can differ in receiver organization and complementary monitoring behavior. Confirm the complete 28-pin pin table, supply range, shutdown behavior, and absolute-maximum limits before treating any alternative as a board-level drop-in replacement.

Decoupling should be placed at the supply and ground pins using the capacitance and voltage rating specified by the manufacturer application circuit. The MAX3243 charge-pump circuitry drives the RS-232 output levels internally, so incorrect capacitor values or long connections can impair rise time and signal integrity. Verify startup, shutdown, and wake-up timing in hardware rather than assuming the approximately 1 uA shutdown value applies under every external loading condition.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The MAX3243 datasheet specifies IEC 1000-4-2 component ESD test levels, but the available product information does not establish RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status. The +G1Z order-code finish must be confirmed from the manufacturer ordering information before making a lead-free compliance claim.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3243ECAI+G1Z datasheet MAX3243ECAI+G1Z pinout MAX3243ECAI+G1Z datasheet pdf MAX3243ECAI+G1Z equivalent MAX3243ECAI+G1Z replacement MAX3243ECAI+G1Z cross reference MAX3243ECAI+G1Z footprint MAX3243ECAI+G1Z application circuit MAX3243ECAI+G1Z price MAX3243ECAI+G1Z stock Analog Devices MAX3243ECAI+G1Z MAX3243ECAI+G1Z vs MAX3243CAI+G1Z MAX3243ECAI+G1Z RS-232 250 kbps MAX3243ECAI+G1Z 28 SSOP

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3243ECAI+G1Z MAX3243CAI+G1Z MAX3243ECAI+ MAX3232EUE+T MAX3237CAI+T RS-232 EIA/TIA-232 RS-232 transceiver interface IC communication semiconductor CMOS-compatible logic charge-pump transmitter automatic shutdown automatic wake-up complementary always-active receiver 28-pin SSOP SSOP package family surface-mount package electrostatic discharge protection IEC 1000-4-2 industrial serial port data-acquisition equipment UART 250 kbps signaling
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ