MAX3243ECAI+G1Z - 3/5 RS-232 Transceiver | Analog Devices
MPN: MAX3243ECAI+G1Z ✓ Hoạt độngMAX3243ECAI+G1Z Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level UART signals into differential-voltage RS-232 levels and converts incoming RS-232 signals back into CMOS-compatible logic. In the signal-chain hierarchy, the MAX3243 belongs to the RS-232 interface transceiver family, within interface ICs and broader communication semiconductors. Its multi-channel organization allows one device to support several data and control lines while reducing package count and PCB area.
The MAX3243 family supports operation from 3.0 V to 5.5 V, enabling use in both 3.3 V and 5 V systems. Its maximum signaling rate is 250 kbps, and the on-board charge-pump transmitter circuitry provides the voltage levels required by RS-232 links. Automatic shutdown reduces supply current to approximately 1 microampere when no valid receiver activity is detected, while wake-up operation restores normal operation when a valid signal returns.
Enhanced ESD protection is a defining feature of this interface family. According to the manufacturer datasheet, transmitter outputs and receiver inputs are protected to plus or minus 15 kV using the IEC 1000-4-2 air-gap discharge test and to plus or minus 8 kV using the IEC 1000-4-2 contact-discharge test. These ratings are relevant for cables exposed to electrostatic discharge, although the complete system still requires suitable grounding and board-layout practices.
Typical applications include industrial serial-port equipment, data-acquisition systems, instrumentation, point-of-sale terminals, and embedded control modules that need several RS-232 channels. The three transmitters support outbound data, modem-control, or handshake signals, while the five receivers support inbound data, status, and monitoring lines. The complementary always-active receiver provides external monitoring when the main receiver circuitry is shut down.
When implementing the MAX3243ECAI+G1Z, follow the manufacturer pin-description and typical-application circuits for supply bypassing, charge-pump capacitors, and connector-side protection. Keep RS-232 traces away from sensitive analog signals, provide a low-impedance ground path, and verify that every connected cable signal remains within the device's absolute-maximum ratings.
This product data combines manufacturer specifications, package and channel-count details, application guidance, and verified drop-in alternatives. It also highlights the differences that matter when deciding whether another MAX3243 order code can replace the target without changing the PCB footprint.
Bộ thay thế dễ dàng lắp đặt cho MAX3243ECAI+G1Z — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243ECAI+G1Z (cùng hình factor và footprint) — khác nhau ở Interface Standard, Number of Receivers, Product Type, Supply Voltage Range.
MAX3243CAI+G1Z
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243ECAI+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243ECAI+G1Z Thông số kỹ thuật
| Product Type | RS-232 transceiver |
| Number of Transmitters | 3 drivers |
| Number of Receivers | 5 receivers |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Automatic Shutdown Supply Current | Approximately 1 uA |
| Transmitter and Receiver ESD Protection, Air Gap | +/-15 kV |
| Transmitter and Receiver ESD Protection, Contact | +/-8 kV |
| Interface Standard | EIA/TIA-232, V.28, and V.24 |
| Hộp | 28-pin SSOP |
| Kiểu lắp đặt | Surface mount |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| Complementary Always-Active Receiver | Yes |
Hướng dẫn cấu hình chân MAX3243ECAI+G1Z 28-pin ssop
Cấu hình chân cho MAX3243ECAI+G1Z (28-pin ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243ECAI+G1Z.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243ECAI+G1Z phù hợp cho 6 Áp dụngs: Industrial Serial-Port Control, Data-Acquisition Equipment, Point-of-Sale Terminal Equipment, Embedded Instrumentation Interface, Automated Test and Measurement, Communication and Network Support Equipment.
Industrial Serial-Port Control
The MAX3243ECAI+G1Z fits industrial serial-port control equipment that must translate between a UART and multiple RS-232 lines at rates up to 250 kbps. Its three transmitters can carry outbound data and modem-control signals, while five receivers support inbound status and monitoring signals. Running from 3.0 V to 5.5 V also allows integration with both 3.3 V embedded controllers and 5 V legacy equipment. Automatic shutdown is useful when a connection is infrequently active because the interface supply current can fall to approximately 1 microampere until a valid receiver signal wakes the device.
Được đề xuất
Data-Acquisition Equipment
For laboratory and industrial data-acquisition equipment, the MAX3243ECAI+G1Z provides three RS-232 transmit channels and five receive channels on a single 28-pin SSOP device. The 250 kbps maximum signaling rate supports moderate-speed command, status, and measurement-data links, while the 3.0 V to 5.5 V supply range supports modern mixed-voltage systems. Enhanced component-level ESD ratings of plus or minus 15 kV air-gap and plus or minus 8 kV contact help protect exposed communication inputs, although cable routing and system grounding remain essential.
Được đề xuất
Point-of-Sale Terminal Equipment
Point-of-sale terminals can use the MAX3243ECAI+G1Z to connect a host controller to several RS-232 peripherals through one compact interface. Three transmitters support command and control outputs, while five receivers support peripheral status and data inputs, reducing the number of separate level-shifting devices required. Its 28-pin SSOP package is suitable for space-constrained terminal electronics, and automatic shutdown helps limit power use when peripherals are disconnected or idle. The design should follow the manufacturer capacitor and layout guidance and include appropriate chassis-ground protection for externally accessible connectors.
Được đề xuất
Embedded Instrumentation Interface
The MAX3243ECAI+G1Z is suitable for embedded instrumentation that communicates through legacy RS-232 ports while running from a 3.3 V system. Its three-driver and five-receiver configuration supports command, status, and data paths without requiring one transceiver per line. Operation to 250 kbps covers common serial-control links, while automatic wake-up allows the interface to react when connected equipment resumes communication. Designers should verify UART levels, cable capacitance, and grounding, especially where the interface connects to long or externally accessible cables.
Được đề xuất
Automated Test and Measurement
The MAX3243ECAI+G1Z can consolidate several RS-232 control paths in automated test and measurement equipment. A single 28-pin SSOP provides three outbound drivers and five inbound receivers, allowing a test controller to manage instrument commands, ready signals, and response data through one standardized interface. The 3.0 V to 5.5 V operating range supports mixed legacy and current logic systems, and the 250 kbps rate is adequate for many supervisory and status links. Keep sensitive measurement circuitry physically separated from connector-side traces and follow the manufacturer application circuit.
Được đề xuất
Communication and Network Support Equipment
The MAX3243ECAI+G1Z can serve as the local RS-232 interface in communication equipment, management controllers, and legacy network-support appliances. Its five receivers are useful for multiple control or diagnostic inputs, while the three transmitters support outbound command paths. Automatic shutdown and wake-up reduce standby consumption when the remote link is inactive, making the device suitable for intermittently used management ports. Because RS-232 is unbalanced and exposed to cabling hazards, use the specified bypass capacitors, short ground references, and appropriately located ESD protection in the final equipment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243ECAI+G1Z — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243CAI+G1Z | MAX3243ECAI+ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Transmitters | 3 | 3 | 3 |
| Receivers | 5 | 5 | 5 |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps |
| Automatic Shutdown Supply Current | Approximately 1 uA | Approximately 1 uA | Approximately 1 uA |
| ESD Protection, Air Gap | +/-15 kV | +/-15 kV | +/-15 kV |
| ESD Protection, Contact | +/-8 kV | +/-8 kV | +/-8 kV |
Bảo phân biệt quan trọng
- Five receivers provide more inbound monitoring channels than a two-receiver RS-232 interface (vsMAX3232EUE+T)
- Retains the full MAX3243 3-driver and 5-receiver channel organization (vsMAX3237CAI+T)
- Combines three drivers, five receivers, 3.0 V to 5.5 V operation, and 250 kbps signaling in one 28-pin SSOP (vsMAX3243ECAI+)
Ghi chú thiết kế
Follow the manufacturer typical application circuit for the external charge-pump and bypass capacitors, and place each capacitor directly across its designated device pins with short ground returns. Avoid routing connector-side RS-232 traces beneath the package or between sensitive analog circuitry. Continuous ground-plane placement helps reduce radiated noise and improves the return path for ESD and cable transients.
Keep the three transmitter outputs and five receiver inputs physically separated from clocks, sensor lines, and precision analog inputs. RS-232 driver outputs are relatively high-voltage, edge-rate signals even though their data rate is moderate. Use the pin-description table to identify connector-facing nets, and check that the PCB edge, connector shield, and chassis-ground strategy satisfy the enclosure's ESD requirements.
Do not substitute a MAX3232 or MAX3237 merely because both are RS-232 interface ICs. MAX3232-class devices have a different channel count and package, while MAX3237-class devices can differ in receiver organization and complementary monitoring behavior. Confirm the complete 28-pin pin table, supply range, shutdown behavior, and absolute-maximum limits before treating any alternative as a board-level drop-in replacement.
Decoupling should be placed at the supply and ground pins using the capacitance and voltage rating specified by the manufacturer application circuit. The MAX3243 charge-pump circuitry drives the RS-232 output levels internally, so incorrect capacitor values or long connections can impair rise time and signal integrity. Verify startup, shutdown, and wake-up timing in hardware rather than assuming the approximately 1 uA shutdown value applies under every external loading condition.
Thông tin tuân thủ
The MAX3243 datasheet specifies IEC 1000-4-2 component ESD test levels, but the available product information does not establish RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status. The +G1Z order-code finish must be confirmed from the manufacturer ordering information before making a lead-free compliance claim.