MAX3243EIDBR - 3-to-5.5V 500kbps RS-232 | Texas Instruments (Tape & Reel)
MPN: MAX3243EIDBR ✓ NakahandaMAX3243EIDBR Ulas
An RS-232 transceiver is an interface IC that combines voltage-level drivers and receivers on one chip. RS-232 uses single-ended bipolar signaling, so the drivers convert low-voltage logic into RS-232 levels while the receivers translate incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3243EIDBR belongs to the RS-232 transceiver class and supports bidirectional data exchange over a multiwire serial connection.
The device provides three line drivers and five line receivers, making it suitable for interfaces that need more receiver channels than transmitter channels. Its maximum signaling rate is 500kbps, while its 3-to-5.5V supply range permits operation from both 3.3V and 5V system rails. The manufacturer also identifies ±15kV IEC ESD protection, adding a defined level of protection for exposed serial-interface connectors.
The MAX3243 family uses flexible power features to reduce consumption when communication is not required. The MAX3243 product family also provides special outputs ROUT2B and INVALID, allowing a system to monitor ring-indicator and valid-input status. These functions can simplify termination of modem and communications equipment without requiring additional discrete logic.
Typical uses include DB9-style serial ports, industrial data acquisition, service-console interfaces, point-of-sale equipment, and embedded systems that exchange RS-232 data with peripherals. The combination of three transmit channels, five receive channels, a 500kbps rate, and 3-to-5.5V operation allows one transceiver to manage several RS-232 signals while sharing common interface functions.
PCB design should route connector-side signals away from sensitive logic and provide a low-impedance ground return. Place bypass capacitance close to the supply pins and follow the manufacturer's pin and layout guidance when terminating unused driver and receiver inputs. Cable protection requirements should be evaluated separately because the specified ±15kV IEC ESD rating protects the interface against electrostatic discharge rather than every overvoltage condition.
This page combines the manufacturer's RS-232 transceiver description with package, protection, ordering, and application guidance. It also organizes replacement considerations, interface comparisons, and practical design notes so engineers can evaluate the MAX3243EIDBR against other compatible MAX3243-family devices before finalizing a PCB or BOM.
Mga alternatibo na pwedeng ilagay na MAX3243EIDBR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MAX3243EIDA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX3243ESE
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX3243CSE
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX3243EIDBR Mga Spesipikasyon
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500kbps |
| Number of Line Drivers | 3 |
| Number of Line Receivers | 5 |
| ESD Protection | ±15kV IEC |
| Interface Standard | RS-232 |
| Packhaging | 28-pin SSOP |
| Package Code | DB |
| Uri ng Pagpapasok | Surface mount |
| Shipping Package | Tube |
Gabay sa Pin Configuration ng MAX3243EIDBR tube
Pin configuration para sa MAX3243EIDBR (tube package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX3243EIDBR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX3243EIDBR ay nararapat para sa 6 aplikasyons: DB9-Style Serial Communications, Industrial Data Acquisition, Point-of-Sale Terminal Interface, Embedded Service Console, Instrumentation and Test Equipment, Security and Access-Control Equipment.
DB9-Style Serial Communications
The MAX3243EIDBR fits DB9-style RS-232 interfaces because it combines three transmitters with five receivers in one 28-pin SSOP package. A host controller can use the drivers for outgoing request, status, and control signals while the five receivers monitor incoming data and handshake lines. Its 500kbps maximum rate supports higher-throughput serial links, and the 3-to-5.5V supply range allows operation from either 3.3V or 5V logic rails. The principal layout consideration is keeping connector-side traces away from sensitive logic while providing a continuous signal-ground return.
Inirekomenda
Industrial Data Acquisition
MAX3243EIDBR is appropriate for industrial data-acquisition equipment that must communicate with controllers, meters, or service equipment over RS-232. Three driver channels can carry commands and control outputs, while five receiver channels support incoming measurements, acknowledgments, and status signals. The 500kbps data rate is suitable for transferring compact command and telemetry frames, while ±15kV IEC ESD protection adds a defined protection level for connector-exposed conductors. Confirm the enclosure grounding, cable routing, and transient requirements before treating ESD protection as complete surge protection.
Inirekomenda
Point-of-Sale Terminal Interface
The MAX3243EIDBR can connect a point-of-sale terminal or peripheral to a host using several RS-232 signals without requiring separate single-channel transceiver packages. Three drivers cover outgoing transactions and commands, while five receivers provide flexibility for acknowledgments, status indicators, and incoming service data. Operating from 3V to 5.5V supports common embedded system rails, and the 500kbps rate allows responsive transaction exchanges. Place bypass capacitance near the device and route the exposed connector interface to provide a low-impedance ground return and minimize noise pickup.
Inirekomenda
Embedded Service Console
MAX3243EIDBR is useful in embedded service consoles that provide a technician-facing RS-232 diagnostic channel. Its three drivers support command output and remote-control signaling, and its five receivers allow the console to read multiple status or handshake inputs. The 28-pin SSOP package limits board area compared with three separate driver and receiver ICs, while the 3-to-5.5V supply range simplifies integration with both 3.3V and 5V embedded processors. The MAX3243 family's flexible power features and status outputs also support designs that need to reduce consumption or monitor line validity.
Inirekomenda
Instrumentation and Test Equipment
The MAX3243EIDBR can provide the physical RS-232 layer for programmable instrumentation and test systems. Three transmitter channels can deliver commands, trigger signals, and mode controls, while five receiver channels can acquire responses and interlocks. At up to 500kbps, the interface can move test records or configuration commands efficiently without requiring a separate physical-layer IC for each signal. Its ±15kV IEC ESD protection is relevant when test equipment is connected to external leads, although fusing, impedance matching, and additional protection may still be required.
Inirekomenda
Security and Access-Control Equipment
MAX3243EIDBR can support RS-232 links in access-control terminals, card readers, and security equipment where an installer or controller requires bidirectional serial communication. Three output channels handle commands or actuator controls, and five input channels provide flexibility for reader responses, door-state reporting, and handshaking. The 3-to-5.5V operating range supports embedded system rails, and the 500kbps rate accommodates rapid transaction and diagnostic data. Because these systems may connect external cables, route the interface according to the manufacturer guidance and assess whether the specified ±15kV IEC ESD protection is sufficient for the installation environment.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX3243EIDBR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX3243EIDA | MAX3243ESE | MAX3243CSE |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Analog Devices | Analog Devices |
| Package | SSOP-28 | SSOP-28 - same package | SSOP-28 - same package | SSOP-28 - same package |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Maximum Data Rate | 500kbps | 500kbps | 500kbps | 500kbps |
| Line Drivers | 3 | 3 | 3 | 3 |
| Line Receivers | 5 | 5 | 5 | 5 |
| ESD Protection | ±15kV IEC | ±15kV IEC | ±15kV IEC | ±15kV HBM |
Pangunahing mga Pagkakaiba
- E-series IEC ESD protection (kumpara saMAX3243CSE)
- Exact 28-pin SSOP DB ordering configuration (kumpara saMAX3243ESE)
- Three transmitters and five receivers in one package (kumpara saMAX3221IPWR)
Talaan ng Disenyo
Place the supply bypass capacitor directly beside the MAX3243EIDBR power and ground pins, and keep the ground return continuous from the device to the RS-232 connector shield or chassis reference. Route driver outputs and receiver inputs away from clocks, reset lines, and precision analog signals. Because the interface can operate at 500kbps, minimize stubs and unnecessary copper around connector-side nets to reduce reflections.
Do not treat the ±15kV IEC ESD rating as unrestricted surge or lightning protection. The rating addresses electrostatic discharge conditions and does not eliminate the need to evaluate cable length, ground potential, fuse selection, or connector shielding. Confirm unused receiver inputs, driver outputs, ROUT2B, INVALID, and supply pins against the manufacturer pin-description table before finalizing the schematic.
The 3-to-5.5V supply range supports both 3.3V and 5V systems, but the system still needs a stable local rail and local decoupling. Use the manufacturer's recommended capacitor values and account for tolerance and temperature characteristics when selecting them. Review the flexible power-feature behavior to determine whether the interface must always remain powered or can enter a lower-consumption state during idle periods.
Assign the 28-pin SSOP footprint only after checking the exact DB package drawing and pin numbering against the selected alternative. The MAX3243 family exposes special ROUT2B and INVALID outputs, so a footprint substitution is acceptable only when those signals, all three drivers, all five receivers, power, and ground map to the same PCB locations. Review the exposed-pad requirement before choosing any SSOP-28 alternative.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer product material identifies ±15kV IEC ESD protection, but it does not establish the requested RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.