Texas Instruments

MAX3243EIDBR - 3-to-5.5V 500kbps RS-232 | Texas Instruments (Tape & Reel)

MPN: MAX3243EIDBR ✓ فعال
3 V to 5.5 V Vdss 28-pin SSOP Package
MOQ: 1 |

MAX3243EIDBR جائزہ

The Texas Instruments MAX3243EIDBR is a 3-to-5.5V multichannel RS-232 line driver and receiver IC with a 500kbps maximum data rate and three drivers, five receivers, and ±15kV IEC ESD protection. It is housed in a 28-pin SSOP package, with the MAX3243EIDBR ordering code identifying the tube-packed industrial-device configuration.

An RS-232 transceiver is an interface IC that combines voltage-level drivers and receivers on one chip. RS-232 uses single-ended bipolar signaling, so the drivers convert low-voltage logic into RS-232 levels while the receivers translate incoming RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3243EIDBR belongs to the RS-232 transceiver class and supports bidirectional data exchange over a multiwire serial connection.

The device provides three line drivers and five line receivers, making it suitable for interfaces that need more receiver channels than transmitter channels. Its maximum signaling rate is 500kbps, while its 3-to-5.5V supply range permits operation from both 3.3V and 5V system rails. The manufacturer also identifies ±15kV IEC ESD protection, adding a defined level of protection for exposed serial-interface connectors.

The MAX3243 family uses flexible power features to reduce consumption when communication is not required. The MAX3243 product family also provides special outputs ROUT2B and INVALID, allowing a system to monitor ring-indicator and valid-input status. These functions can simplify termination of modem and communications equipment without requiring additional discrete logic.

Typical uses include DB9-style serial ports, industrial data acquisition, service-console interfaces, point-of-sale equipment, and embedded systems that exchange RS-232 data with peripherals. The combination of three transmit channels, five receive channels, a 500kbps rate, and 3-to-5.5V operation allows one transceiver to manage several RS-232 signals while sharing common interface functions.

PCB design should route connector-side signals away from sensitive logic and provide a low-impedance ground return. Place bypass capacitance close to the supply pins and follow the manufacturer's pin and layout guidance when terminating unused driver and receiver inputs. Cable protection requirements should be evaluated separately because the specified ±15kV IEC ESD rating protects the interface against electrostatic discharge rather than every overvoltage condition.

This page combines the manufacturer's RS-232 transceiver description with package, protection, ordering, and application guidance. It also organizes replacement considerations, interface comparisons, and practical design notes so engineers can evaluate the MAX3243EIDBR against other compatible MAX3243-family devices before finalizing a PCB or BOM.

کے لیے ڈراپ اِن متبادل MAX3243EIDBR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

MAX3243EIDA

✅ ڈراپ-اِن
📦 SSOP-28
Same MAX3243E family with 3-to-5.5V operation, 500kbps data rate, three drivers, and five receivers; package and temperature suffix require final comparison

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3243ESE

✅ ڈراپ-اِن
📦 SSOP-28
Same RS-232 channel architecture and 3-to-5.5V supply class, with 0% difference in the stated supply range and 500kbps data rate; environmental suffix must be checked

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3243CSE

✅ ڈراپ-اِن
📦 SSOP-28
Same SSOP-28 RS-232 interface and 500kbps data-rate class, but the lower E-series ESD protection grade represents an approximately 15kV nominal protection difference versus MAX3243EIDBR

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

MAX3243EIDBR تفصیلات

Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500kbps
Number of Line Drivers 3
Number of Line Receivers 5
ESD Protection ±15kV IEC
Interface Standard RS-232
پیکیج 28-pin SSOP
Package Code DB
ماؤنٹنگ ٹائپ Surface mount
Shipping Package Tube

MAX3243EIDBR tube پن کنفیگریشن گائیڈ

MAX3243EIDBR (tube پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔

MAX3243EIDBR کے لیے tube پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں MAX3243EIDBR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

MAX3243EIDBR کے لیے موزوں ہے 6 ایپلیکیشنs: DB9-Style Serial Communications, Industrial Data Acquisition, Point-of-Sale Terminal Interface, Embedded Service Console, Instrumentation and Test Equipment, Security and Access-Control Equipment.

🌐

DB9-Style Serial Communications

The MAX3243EIDBR fits DB9-style RS-232 interfaces because it combines three transmitters with five receivers in one 28-pin SSOP package. A host controller can use the drivers for outgoing request, status, and control signals while the five receivers monitor incoming data and handshake lines. Its 500kbps maximum rate supports higher-throughput serial links, and the 3-to-5.5V supply range allows operation from either 3.3V or 5V logic rails. The principal layout consideration is keeping connector-side traces away from sensitive logic while providing a continuous signal-ground return.

🏭

Industrial Data Acquisition

MAX3243EIDBR is appropriate for industrial data-acquisition equipment that must communicate with controllers, meters, or service equipment over RS-232. Three driver channels can carry commands and control outputs, while five receiver channels support incoming measurements, acknowledgments, and status signals. The 500kbps data rate is suitable for transferring compact command and telemetry frames, while ±15kV IEC ESD protection adds a defined protection level for connector-exposed conductors. Confirm the enclosure grounding, cable routing, and transient requirements before treating ESD protection as complete surge protection.

🖥️

Point-of-Sale Terminal Interface

The MAX3243EIDBR can connect a point-of-sale terminal or peripheral to a host using several RS-232 signals without requiring separate single-channel transceiver packages. Three drivers cover outgoing transactions and commands, while five receivers provide flexibility for acknowledgments, status indicators, and incoming service data. Operating from 3V to 5.5V supports common embedded system rails, and the 500kbps rate allows responsive transaction exchanges. Place bypass capacitance near the device and route the exposed connector interface to provide a low-impedance ground return and minimize noise pickup.

🔧

Embedded Service Console

MAX3243EIDBR is useful in embedded service consoles that provide a technician-facing RS-232 diagnostic channel. Its three drivers support command output and remote-control signaling, and its five receivers allow the console to read multiple status or handshake inputs. The 28-pin SSOP package limits board area compared with three separate driver and receiver ICs, while the 3-to-5.5V supply range simplifies integration with both 3.3V and 5V embedded processors. The MAX3243 family's flexible power features and status outputs also support designs that need to reduce consumption or monitor line validity.

📺

Instrumentation and Test Equipment

The MAX3243EIDBR can provide the physical RS-232 layer for programmable instrumentation and test systems. Three transmitter channels can deliver commands, trigger signals, and mode controls, while five receiver channels can acquire responses and interlocks. At up to 500kbps, the interface can move test records or configuration commands efficiently without requiring a separate physical-layer IC for each signal. Its ±15kV IEC ESD protection is relevant when test equipment is connected to external leads, although fusing, impedance matching, and additional protection may still be required.

🎥

Security and Access-Control Equipment

MAX3243EIDBR can support RS-232 links in access-control terminals, card readers, and security equipment where an installer or controller requires bidirectional serial communication. Three output channels handle commands or actuator controls, and five input channels provide flexibility for reader responses, door-state reporting, and handshaking. The 3-to-5.5V operating range supports embedded system rails, and the 500kbps rate accommodates rapid transaction and diagnostic data. Because these systems may connect external cables, route the interface according to the manufacturer guidance and assess whether the specified ±15kV IEC ESD protection is sufficient for the installation environment.

What is the MAX3243EIDBR?
The MAX3243EIDBR is a Texas Instruments 3-to-5.5V RS-232 transceiver with three line drivers, five line receivers, a maximum data rate of 500kbps, and ±15kV IEC ESD protection. It combines the transmit and receive functions needed for a multi-channel serial interface in a 28-pin SSOP package. According to the Texas Instruments MAX3243E product information, the family also provides flexible power features and status outputs for ring-indicator and valid-input monitoring.
How many RS-232 drivers and receivers does MAX3243EIDBR have?
The MAX3243EIDBR has three RS-232 line drivers and five RS-232 line receivers. This unequal channel count is useful for interfaces in which the host sends fewer signals than it receives, such as a DB9-style communications port. The Texas Instruments MAX3243 family description identifies the three-driver and five-receiver arrangement, while the MAX3243E product page defines the device as a multichannel line driver and receiver.
What is the maximum data rate of the MAX3243EIDBR?
The maximum RS-232 data rate is 500kbps. The Texas Instruments MAX3243E product page specifies a 3-to-5.5V multichannel RS-232 line driver and receiver operating at up to 500kbps. This rate supports substantially faster data transfer than conventional low-speed serial links while remaining compatible with the electrical signaling architecture of the MAX3243 family.
What is the supply voltage range of MAX3243EIDBR?
The MAX3243EIDBR operates from 3V to 5.5V. According to the Texas Instruments MAX3243E product information, this range allows the transceiver to be powered from common 3.3V or 5V rails. The wide range also provides design flexibility when the interface must operate across multiple industrial or embedded supply systems.
Does MAX3243EIDBR include ESD protection?
Yes, the MAX3243EIDBR includes ±15kV IEC ESD protection. The Texas Instruments MAX3243E product page identifies this protection on the multichannel RS-232 interface. It is especially relevant when RS-232 connector signals leave the equipment enclosure, although ESD protection does not replace surge protection for other transient sources or continuous overvoltage conditions.
Where can I download the MAX3243EIDBR datasheet PDF?
The MAX3243EIDBR datasheet can be accessed through the Texas Instruments MAX3243E product page at https://www.ti.com/product/MAX3243E. Select the manufacturer documentation resources for the exact ordering option and package. Use the device data sheet for the authoritative pin descriptions, electrical limits, recommended operating conditions, and layout guidance rather than relying on a distributor summary.
Where can I find the MAX3243EIDBR pinout?
The MAX3243EIDBR pinout is identified in the Texas Instruments manufacturer documentation for the MAX3243E family. Use the device data sheet's pin-description and package-drawing sections to map the 28-pin SSOP connections. The distributor listing confirms the 28-pin SSOP package, but the manufacturer document should remain the authority for every signal name, exposed connection, and no-connect position.
What can replace the MAX3243EIDBR?
The closest documented replacement path is another compatible MAX3243-family device in the same 28-pin SSOP footprint, such as the MAX3243ESE or MAX3243EIDA where package, channel count, supply range, and ESD grade match the installed design. Confirm the exact pinout, temperature grade, and protection level against the manufacturer data sheet before production substitution. Use the Request a Quote form on this page when sourcing the exact ordering code.
Can MAX3243ESE replace MAX3243EIDBR?
The MAX3243ESE can be considered only after confirming that its 28-pin SSOP pinout matches the MAX3243EIDBR in the installed circuit. Both devices belong to the MAX3243 RS-232 transceiver family, but package code, temperature grade, and ordering details must be checked rather than assumed from the family name. The MAX3243EIDBR provides three drivers, five receivers, operation from 3V to 5.5V, and ±15kV IEC ESD protection.
Is the MAX3243EIDBR the same as the MAX3243E?
The MAX3243EIDBR is the orderable MAX3243E configuration associated with the 28-pin SSOP DB package and tube configuration, while MAX3243E is the family designation. The family supports 3-to-5.5V operation, a maximum data rate of 500kbps, three drivers, five receivers, and ±15kV IEC ESD protection. Always order and compare the complete package-specific MPN rather than using the family name as a substitute.
When should I choose MAX3243EIDBR instead of MAX3243ESE?
Choose the MAX3243EIDBR when the production BOM specifically requires the DB package code and tube configuration for a 28-pin SSOP design. Consider the MAX3243ESE when its complete pinout and environmental ratings have been verified as equivalent for the target system. The key selection checks are package, pin mapping, temperature grade, supply range, driver/receiver count, and ESD rating rather than the family designation alone.
Is MAX3243EIDBR suitable for industrial equipment?
The MAX3243EIDBR is suitable for industrial interface applications when the completed design stays within the device's specified environmental limits and uses the manufacturer-recommended protection and layout. Its industrial-ordering designation, 3-to-5.5V supply range, 500kbps data rate, and ±15kV IEC ESD protection suit equipment with exposed RS-232 connections. Confirm the exact operating-temperature limits and compliance records for the finished product.
Where can I buy MAX3243EIDBR online?
Use the Request a Quote form on this page to request MAX3243EIDBR availability, quantity pricing, lead time, and the appropriate tube packaging. The exact Texas Instruments ordering code is MAX3243EIDBR in a 28-pin SSOP package. A written quote request is the most reliable way to confirm exact-MPN stock, schedule, and commercial terms without relying on a generic family listing.
What is the price of MAX3243EIDBR?
Current pricing for the exact MAX3243EIDBR ordering code is handled through the Request a Quote form on this page. Provide the required quantity, tube packaging preference, and destination country to receive an updated quotation. The part is a 28-pin SSOP RS-232 transceiver with three drivers, five receivers, a 500kbps maximum rate, and ±15kV IEC ESD protection.
What is the lead time and stock status for MAX3243EIDBR?
Request the current stock position and lead time through the Request a Quote form on this page. The quantity, shipment destination, and schedule requirements determine the most useful availability response. For design planning, the MAX3243EIDBR is a 28-pin SSOP, 3-to-5.5V RS-232 transceiver with three drivers, five receivers, a 500kbps maximum data rate, and ±15kV IEC ESD protection.

کے لیے انجینئرنگ ریفرنس ڈیٹا MAX3243EIDBR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose MAX3243EIDBR when the design needs a 28-pin SSOP RS-232 interface with three transmitters, five receivers, a 500kbps maximum data rate, operation from 3V to 5.5V, and ±15kV IEC ESD protection. Its tube ordering configuration is suitable for prototypes and production assemblies that use tube packaging. Consider MAX3243EIDA when it provides the required package, environmental grade, and lifecycle fit without changing the electrical design. MAX3243ESE can be evaluated as a same-footprint second source, provided the complete pinout, temperature grade, and ESD qualification are verified. MAX3243CSE is more appropriate only when its different HBM-focused protection rating satisfies the system requirement. For any replacement, package dimensions, lead pitch, exposed-pad arrangement, pin names, channel functions, logic levels, and power rails must be checked before schematic or PCB release.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ MAX3243EIDA MAX3243ESE MAX3243CSE
Brand Texas Instruments Texas Instruments Analog Devices Analog Devices
Package SSOP-28 SSOP-28 - same package SSOP-28 - same package SSOP-28 - same package
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 500kbps 500kbps 500kbps 500kbps
Line Drivers 3 3 3 3
Line Receivers 5 5 5 5
ESD Protection ±15kV IEC ±15kV IEC ±15kV IEC ±15kV HBM

اہم امتیازی خصوصیات

  • E-series IEC ESD protection (بمقابلہMAX3243CSE)
  • Exact 28-pin SSOP DB ordering configuration (بمقابلہMAX3243ESE)
  • Three transmitters and five receivers in one package (بمقابلہMAX3221IPWR)

ڈیزائن نوٹس

Place the supply bypass capacitor directly beside the MAX3243EIDBR power and ground pins, and keep the ground return continuous from the device to the RS-232 connector shield or chassis reference. Route driver outputs and receiver inputs away from clocks, reset lines, and precision analog signals. Because the interface can operate at 500kbps, minimize stubs and unnecessary copper around connector-side nets to reduce reflections.

Do not treat the ±15kV IEC ESD rating as unrestricted surge or lightning protection. The rating addresses electrostatic discharge conditions and does not eliminate the need to evaluate cable length, ground potential, fuse selection, or connector shielding. Confirm unused receiver inputs, driver outputs, ROUT2B, INVALID, and supply pins against the manufacturer pin-description table before finalizing the schematic.

The 3-to-5.5V supply range supports both 3.3V and 5V systems, but the system still needs a stable local rail and local decoupling. Use the manufacturer's recommended capacitor values and account for tolerance and temperature characteristics when selecting them. Review the flexible power-feature behavior to determine whether the interface must always remain powered or can enter a lower-consumption state during idle periods.

Assign the 28-pin SSOP footprint only after checking the exact DB package drawing and pin numbering against the selected alternative. The MAX3243 family exposes special ROUT2B and INVALID outputs, so a footprint substitution is acceptable only when those signals, all three drivers, all five receivers, power, and ground map to the same PCB locations. Review the exposed-pad requirement before choosing any SSOP-28 alternative.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The manufacturer product material identifies ±15kV IEC ESD protection, but it does not establish the requested RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

متعلقہ تلاشیں

MAX3243EIDBR datasheet MAX3243EIDBR pinout MAX3243EIDBR datasheet pdf MAX3243EIDBR 28-SSOP MAX3243EIDBR equivalent MAX3243EIDBR replacement MAX3243EIDBR cross reference MAX3243EIDBR vs MAX3243ESE MAX3243EIDBR price MAX3243EIDBR stock Texas Instruments MAX3243EIDBR MAX3243EIDBR RS-232 transceiver MAX3243EIDBR 500kbps MAX3243EIDBR industrial interface MAX3243EIDBR footprint

متعلقہ اجزاء اور اصطلاحات

Texas Instruments MAX3243EIDBR MAX3243E MAX3243EIDA MAX3243ESE MAX3243CSE Analog Devices RS-232 transceiver RS-232 line driver RS-232 line receiver interface IC semiconductor 3-to-5.5V power supply 500kbps data rate ±15kV IEC ESD protection SSOP-28 SSOP package family surface mount SMD DB9 serial interface industrial data acquisition point-of-sale terminal test equipment ROUT2B output INVALID output RoHS REACH AEC-Q100
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں