Analog Devices

MAX3387EEUG+T - 3V RS-232 Transceiver | Analog Devices

MPN: MAX3387EEUG+T ✓ Nakahanda
3 V to 5.5 V Vdss 24-pin TSSOP Package
MOQ: 1 |

MAX3387EEUG+T Ulas

The Analog Devices MAX3387EEUG+T is a 3V-powered RS-232 communications interface IC with three transmitters and three receivers, 250kbps data-rate capability, and enhanced electrostatic-discharge protection. It is packaged in a 24-pin TSSOP and can operate from a 3V to 5.5V supply.

An RS-232 transceiver is a semiconductor interface that converts logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into digital logic levels. The MAX3387E belongs to the interface IC hierarchy, where it bridges a host controller and external data-terminal equipment through EIA/TIA-232 links. Its dual charge-pump design supports true RS-232 operation from a low-voltage supply without a separate negative supply rail.

The device provides three driver channels and three receiver channels, allowing two RS-232 ports or several individual data paths to be implemented in one package. A proprietary low-dropout transmitter output stage enables operation from supplies up to 5.5V while maintaining compliant output levels. The manufacturer also identifies enhanced ESD protection, with the product listing specifying 15kV protection.

At data rates up to 250kbps, the MAX3387EEUG+T is appropriate for data links that require more throughput than a conventional low-speed serial port. Its internal charge pumps require four 0.1uF capacitors for operation from 3.3V. This compact approach eliminates the external negative-voltage supply circuitry commonly associated with older RS-232 implementations, reducing board area and simplifying system power design.

Typical applications include industrial control terminals, data-acquisition equipment, point-of-sale terminals, configuration interfaces, portable diagnostic equipment, and embedded serial adapters. Multiple driver and receiver channels also suit designs that combine console, firmware-update, and peripheral-control links while limiting the number of interface ICs on the board.

PCB design should keep the charge-pump capacitors close to their associated pins and provide adequate return paths for high-speed transitions. Designers should also distinguish powered logic-side signals from externally accessible RS-232 lines, route cables to reduce ESD exposure, and verify signal polarity and logic levels on every connected channel before production release.

This page combines the manufacturer interface description with verified ordering information, a focused drop-in cross-reference, and practical implementation guidance. It is intended to help engineers identify the correct package variant, compare compatible devices, and implement a compact, low-power RS-232 interface without overlooking supply, ESD, or signal-integrity constraints.

Mga alternatibo na pwedeng ilagay na MAX3387EEUG+T — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MAX3387EEUG+T (parehas na form factor at footprint) — pagkakaiba sa Package, ESD Protection.

Analog Devices
ESD Protection: ±15 kV
Ikabit sa MAX3387EEUG+T →
Analog Devices
Package: 24-TSSOP (4.40 mm)
Ikabit sa MAX3387EEUG+T →

MAX3387ECUG+T

✅ Drop-In
Analog Devices
📦 24-pin TSSOP
3/3 RS-232 transceiver · 3 · 3 · 3 V to 5.5 V · 3 V · 250 kbps · ±15 kV · EIA/TIA-232 and V.28/V.24

Magkontak para sa presyo

Tingnan ang Datasheet →

MAX3387EEUG+T Mga Spesipikasyon

Product Type 3/3 RS-232 transceiver
Transmitter Channels 3 channels
Receiver Channels 3 channels
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection 15 kV
Charge Pump Dual charge pump
Charge Pump Capacitors 4 x 0.1 uF
Transmitter Output Stage Proprietary low-dropout design
Communication Standard EIA/TIA-232 and V.28/V.24
Packhaging 24-pin TSSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MAX3387EEUG+T 24-pin tssop

Pin configuration para sa MAX3387EEUG+T (24-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 24-pin tssop package para sa MAX3387EEUG+T

Wala ng detalyadong pinout data na magagamit para sa MAX3387EEUG+T.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX3387EEUG+T ay nararapat para sa 6 aplikasyons: Industrial Control Terminals, Data-Acquisition Equipment, Point-of-Sale Terminals, Portable Diagnostic Equipment, Embedded Configuration Interfaces, RS-232-to-Embedded Adapters.

🏭

Industrial Control Terminals

The MAX3387EEUG+T fits industrial control terminals that require multiple RS-232 links from a 3V or 3.3V system supply. Its three transmitters and three receivers can support separate console, status, and service paths without requiring three single-channel interface devices. Operation to 250kbps provides useful throughput for configuration traffic and diagnostic protocols, while the dual charge pump removes the need for an external negative supply. Designers should reserve the 15kV ESD capability as one layer of protection and verify the complete cable-entry protection scheme against the enclosure and installation environment.

📊

Data-Acquisition Equipment

The MAX3387EEUG+T is appropriate for compact data-acquisition equipment that connects a controller to external measurement or laboratory peripherals through RS-232. The three transmitter and receiver channels allow a single package to serve bidirectional links that would otherwise consume several board areas. A 250kbps maximum rate supports legacy instrumentation protocols, and operation from 3V to 5.5V simplifies adaptation across industrial and embedded platforms. The four required 0.1uF charge-pump capacitors should be placed according to the manufacturer layout guidance, with cable routing and grounding checked to minimize noise and ESD exposure.

🖥️

Point-of-Sale Terminals

Point-of-sale terminal designers can use the MAX3387EEUG+T for peripheral, printer, display, or service connections where RS-232 remains common in installed equipment. Three drivers and three receivers provide channel flexibility for multiple peripherals, while the low-voltage charge-pump architecture avoids a separate negative rail in compact systems. Its data-rate capability of up to 250kbps exceeds the needs of many legacy transaction peripherals and supports more demanding firmware or diagnostic channels. Board planning should account for all seven interface channels, proper logic-level translation where required, and protection at externally accessible connector pins.

🔧

Portable Diagnostic Equipment

The MAX3387EEUG+T suits portable diagnostic and service equipment that communicates with embedded controllers, adapters, or test fixtures. Its 3V minimum supply supports compact systems, and the internal dual charge pump generates RS-232 levels without an external negative power supply. Multiple channels can maintain separate communication paths for a device under test, a configuration interface, and an operator console. The 24-pin TSSOP package helps control board area, but thermal and grounding design remain important because connector transients and cable-induced noise can affect receiver margins. External protection should be evaluated for field-accessible ports.

🧩

Embedded Configuration Interfaces

The MAX3387EEUG+T can support embedded configuration, firmware-update, and production-test interfaces in systems that retain an RS-232 command port. A 3.3V host can operate the interface without a separate negative supply, and the 250kbps rate is suitable for common command protocols and service logs. The three-driver, three-receiver arrangement permits concurrent paths where the host must distinguish command, status, and auxiliary channels. Firmware designers should define idle levels and polarity explicitly, while hardware engineers should use the manufacturer’s pin table and charge-pump layout to prevent startup or signal-integrity issues.

🌐

RS-232-to-Embedded Adapters

The MAX3387EEUG+T is well suited to compact RS-232 interface adapters that bridge a modern embedded controller with legacy peripheral equipment. Three full-duplex channel pairs allow one adapter to consolidate printer, instrument, and service connections, while the 250kbps capability supports the operating range of many legacy devices. Running from 3V to 5.5V permits direct use in both 3.3V and 5V systems. Because these adapters often connect to user-accessible cables, engineers should combine sensible trace routing with connector-side ESD protection and verify ground continuity between the two devices.

What are the key specifications of MAX3387EEUG+T that engineers should know?
The MAX3387EEUG+T is a 3V-powered, 3/3 RS-232 transceiver with three transmitters, three receivers, operation from 3V to 5.5V, data rates up to 250kbps, and 15kV ESD protection. According to the Analog Devices MAX3387E product page, it implements EIA/TIA-232 and V.28/V.24 communications with low power requirements and enhanced electrostatic-discharge protection. The 24-pin TSSOP package is identified by the verified product listing.
What is the operating voltage of MAX3387EEUG+T?
The MAX3387EEUG+T operates from a 3V to 5.5V supply. According to the manufacturer product description, the MAX3387E is a 3V-powered communications interface whose dual charge pump generates the voltage swings required for true RS-232 operation. Its proprietary low-dropout transmitter stage supports operation from a supply as high as 5.5V while maintaining RS-232-compliant output levels.
How many RS-232 drivers and receivers does MAX3387EEUG+T contain?
The MAX3387EEUG+T contains three RS-232 transmitters and three receivers. The Analog Devices MAX3387E product page identifies the part as a 3/3 communications interface, while the verified distributor listing describes it as a full RS-232 transceiver. Three channels in each direction allow several unidirectional RS-232 links or two complete bidirectional port connections within one device.
What is the maximum data rate of MAX3387EEUG+T?
The MAX3387EEUG+T supports data rates up to 250kbps. The verified MAX3387E datasheet excerpt states that the interface can operate to 250kbps while maintaining RS-232-compliant output levels. This makes the device suitable for embedded serial links, configuration channels, and industrial control equipment that require more throughput than a basic asynchronous serial port.
Where can I download the MAX3387EEUG+T datasheet PDF?
The official MAX3387E product page at Analog Devices provides the manufacturer’s authoritative device information and datasheet access for the MAX3387EEUG+T family. The datasheet should be used for the complete pin-description table, electrical characteristics, recommended operating conditions, and charge-pump capacitor values. Use the 24-pin TSSOP diagram when assigning PCB tracks and checking exposed or no-connect positions.
Where can I find the MAX3387EEUG+T pinout?
The MAX3387EEUG+T pinout is defined by the 24-pin TSSOP pin-description table in the manufacturer datasheet. The verified ordering information confirms a 24-TSSOP package, while the individual pin names and numbers are not reproduced on this page. Use the manufacturer’s pin-description table to connect charge-pump capacitors, supply pins, driver outputs, receiver inputs, and control signals without relying on a generic package drawing.
Does the MAX3387EEUG+T require an external negative supply voltage?
The MAX3387EEUG+T does not require a separate external negative power supply for RS-232 level generation. According to the manufacturer documentation excerpt, a dual charge pump creates the required bipolar voltage swings, and the transmitter stage uses a proprietary low-dropout design. This internal approach simplifies 3V and 3.3V system designs compared with RS-232 implementations that use discrete charge-pump or negative-supply circuitry.
What capacitors are required for the MAX3387EEUG+T charge pump?
The MAX3387EEUG+T charge pump requires four small 0.1uF capacitors for operation from a 3.3V supply. The verified manufacturer excerpt identifies this value and quantity explicitly. Place these capacitors close to the associated device pins, follow the datasheet polarity and layout instructions, and account for capacitor tolerance and dielectric characteristics when validating the complete charge-pump circuit.
Is the MAX3387EEUG+T protected for industrial electrostatic discharge?
The MAX3387EEUG+T includes enhanced electrostatic-discharge protection, with the verified product listing specifying 15kV protection. The Analog Devices MAX3387E product page likewise highlights enhanced ESD protection as a principal device feature. ESD rating alone does not replace a complete protection strategy, so exposed cable-connected RS-232 lines should still be routed away from sensitive circuitry and evaluated for additional system-level protection.
Where can I buy MAX3387EEUG+T and request a quotation?
Use the Request a Quote form on this page to request current availability, unit pricing, and lead time for the MAX3387EEUG+T. The part is identified as an active 24-pin TSSOP device in the verified ordering information. The Request a Quote workflow is the appropriate route for a current commercial commitment because inventory and pricing can change independently of the component’s technical specification.
What is the price of MAX3387EEUG+T?
Current commercial pricing for the MAX3387EEUG+T should be requested through the Request a Quote form on this page. The verified search results identify the exact MPN and show distributor inventory activity, but they do not provide a qualifying quantity-break table with explicit quantities and prices. A quote request therefore avoids presenting stale or noncontractual pricing for the exact 24-pin TSSOP ordering code.
What is the lead time for MAX3387EEUG+T?
Request the current MAX3387EEUG+T lead time and minimum order quantity through the Request a Quote form on this page. The verified ordering data establishes the exact component and package but does not state a fixed production or fulfillment interval. Current lead time can vary with inventory position, order quantity, and manufacturing conditions, so purchasing should rely on a quote specific to the requested schedule.
Is MAX3387EEUG+T currently in stock?
The verified distributor listings show purchasing or inventory-reference activity for MAX3387EEUG+T, but they do not establish a stable stock quantity for the current date. Use the Request a Quote form on this page to confirm availability for the quantity and shipment date required. The product is listed as active in the component cross-reference information, so it remains a current design option.
What is the best drop-in replacement for MAX3387EEUG+T?
MAX3387ECUG+T is the best-supported drop-in replacement in the available cross-reference information. The comparison states that the MAX3387C and MAX3387E versions use consistent terminals and packages and can replace one another without PCB modification. Both are identified as 24-pin TSSOP, 3V, 250kbps interface devices. Confirm temperature-grade and ordering requirements against the manufacturer datasheet before approving a substitution.
Can MAX3387ECUG+T replace MAX3387EEUG+T?
Yes, MAX3387ECUG+T is identified as a complete, pin-compatible replacement for MAX3387EEUG+T in the verified cross-reference comparison. Both use a 24-pin TSSOP package and the cross-reference identifies consistent terminals, package construction, 3V operation, and 250kbps performance. The change should still be checked for operating-temperature, lifecycle, and production-qualification requirements before it is released into a new design.
What can replace MAX3387EEUG+T?
MAX3387ECUG+T is the directly supported replacement for MAX3387EEUG+T because it shares the 24-pin TSSOP footprint and is described as a complete replacement. Parts compared only by broader functionality, such as MAX3392EEUD+ or MAX333ACUP, should not be treated as drop-in devices because the available comparison information does not establish an identical package and pin layout. A PCB redesign may be required for those alternatives.
Is MAX3387EEUG+T the same as MAX3387ECUG+T?
MAX3387EEUG+T and MAX3387ECUG+T are functionally and pin-compatibility equivalents with the same 24-pin TSSOP package and 3V, 250kbps operating class. The verified comparison describes their terminals and packages as consistent and describes the relationship as a complete replacement. They are not identical orderable MPNs, so temperature range, qualification status, and lifecycle should still be reviewed against the current manufacturer documentation.
MAX3387EEUG+T vs MAX3387ECUG+T - which is better for industrial equipment?
Choose MAX3387EEUG+T when its exact ordering code and qualification requirements have been validated for the industrial design; choose MAX3387ECUG+T when it provides the required temperature grade or sourcing availability. The verified cross-reference establishes that both are 3V, 250kbps, 24-pin TSSOP devices with consistent terminals, making MAX3387ECUG+T a drop-in option. The decisive criteria are current datasheet limits, qualification status, and lifecycle rather than package compatibility.
When should I choose MAX3387EEUG+T instead of MAX3387ECUG+T?
Choose MAX3387EEUG+T when the original design has been validated around that exact suffix and its electrical or qualification limits are appropriate. Choose MAX3387ECUG+T when that ordering code offers the required environmental grade, availability, or lifecycle position while preserving the same PCB. The available cross-reference confirms package and terminal compatibility, but it does not justify ignoring temperature ratings or production-status requirements.
Is MAX3387EEUG+T suitable for a 3.3V embedded serial interface?
The MAX3387EEUG+T is suitable for a 3.3V embedded serial interface because it supports a 3V to 5.5V supply range and its charge pump requires four 0.1uF capacitors for 3.3V operation. According to the manufacturer description, it can maintain RS-232-compliant output levels at rates up to 250kbps. Confirm logic-level compatibility, cable length, grounding, and signal polarity during interface validation.
What is the best Analog Devices equivalent for MAX3387EEUG+T?
MAX3387ECUG+T is the best-supported Analog Devices equivalent because the verified cross-reference identifies it as a complete replacement with consistent terminals and package construction. It retains the 24-pin TSSOP format, 3V operation, and 250kbps class of the MAX3387EEUG+T. Other Analog Devices interface products shown in comparison pages may offer different channel counts, packages, or functions and therefore are not necessarily drop-in replacements.

Impormasyon ng Talumpati sa Engineering for MAX3387EEUG+T — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MAX3387EEUG+T when the original design has been validated around this exact ordering code, especially for a compact 3V or 3.3V embedded product requiring three RS-232 channels, operation up to 250kbps, and enhanced 15kV ESD protection. Choose MAX3387ECUG+T when its temperature grade, qualification status, lifecycle, or sourcing position better matches the production requirement; the verified cross-reference identifies it as a complete replacement with the same 24-pin TSSOP terminals. Avoid assuming that MAX3392EEUD+, MAX333ACUP, MAX3377EEUD+, or MAX3318CPWR are drop-in substitutes, because the available comparison information does not establish identical packages and pin assignments for those products.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX3387ECUG+T
Package 24-pin TSSOP 24-pin TSSOP
Brand Analog Devices Analog Devices
Device Type 3/3 RS-232 transceiver 3/3 RS-232 transceiver
Supply Voltage 3 V to 5.5 V 3 V
Maximum Data Rate 250 kbps 250 kbps
Transmitter Channels 3 channels 3 channels
Receiver Channels 3 channels 3 channels
Pin Compatibility 24-pin TSSOP reference footprint Complete replacement with consistent terminals and package

Pangunahing mga Pagkakaiba

  • Three full-duplex RS-232 channels in one interface IC (kumpara saMAX3387ECUG+T)
  • Low-voltage operation without an external negative supply (kumpara saMAX3387ECUG+T)
  • 250kbps class throughput for legacy serial links (kumpara saMAX3387ECUG+T)

Talaan ng Disenyo

Place the four 0.1uF charge-pump capacitors close to the pins identified in the manufacturer datasheet. Keep their ground connections short and use the recommended layout to minimize charge-pump ripple and switching noise on nearby logic. Confirm the fitted capacitor type, voltage rating, tolerance, and DC-bias behavior at the actual supply voltage; a nominal 0.1uF capacitance does not guarantee the same effective value under bias.

Do not treat RS-232 voltage levels as direct logic-level inputs. The MAX3387EEUG+T converts between digital logic and bipolar RS-232 signals, so verify receiver thresholds, transmitter polarity, signal direction, and idle states for every channel. Also check whether the attached equipment uses V.28 or V.24 signaling. Incorrect grounding or polarity can appear as intermittent communication failures even when the IC is operating properly.

Route each external RS-232 line with a continuous return path and keep it away from clocks, switching regulators, and sensitive analog inputs. Use controlled-impedance routing where cable interconnects or long PCB runs make reflections relevant. The device supports rates up to 250kbps, but connector, cable, ground, and receiver characteristics can limit reliable communication distance; validate the complete channel with its intended cable and grounding configuration.

Use the internal dual charge pump as specified, but still evaluate conducted and radiated emissions because its switching transitions can couple into shared supply or ground paths. Add local supply decoupling, maintain a compact ground return beneath the device where the package permits, and avoid routing charge-pump connections beneath sensitive signal paths. Compare emissions before and after qualification changes because adding capacitance or extending charge-pump traces can alter system noise behavior.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The exact compliance status for MAX3387EEUG+T was not established by the manufacturer information included in the product-page and ordering results. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations using the current Analog Devices product documentation before environmental qualification.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX3387EEUG+T datasheet MAX3387EEUG+T pinout MAX3387EEUG+T datasheet pdf MAX3387EEUG+T equivalent MAX3387EEUG+T replacement MAX3387EEUG+T drop-in replacement MAX3387EEUG+T vs MAX3387ECUG+T MAX3387EEUG+T 24-TSSOP MAX3387EEUG+T 3V 250kbps Analog Devices MAX3387EEUG+T MAX3387EEUG+T price MAX3387EEUG+T stock MAX3387EEUG+T charge pump capacitors MAX3387EEUG+T industrial RS-232

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices MAX3387EEUG+T MAX3387ECUG+T MAX3387E RS-232 transceiver EIA/TIA-232 V.28 V.24 interface IC communications interface RS-232 logic-level conversion dual charge pump low-dropout transmitter 3V power supply 250kbps data rate 15kV ESD protection 24-pin TSSOP TSSOP package family surface-mount package charge-pump capacitors industrial control data-acquisition equipment point-of-sale terminal RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ