Maxim Integrated

MAX369EWN+ - Dual 4:1 Fault-Protected Analog MUX | Maxim

MPN: MAX369EWN+ ✓ Nakahanda
1.8 kOhm Rds(on) 18-SOIC Package
MOQ: 1 |

MAX369EWN+ Ulas

Maxim Integrated MAX369EWN+ is a dual 4:1 analog multiplexer with a 1.8 kOhm on-resistance, fault protection, and latch capability in an 18-SOIC package. The device routes two independently selectable analog channels through each multiplexer, providing four inputs per channel for a total of eight switched inputs. Its control inputs are compatible with TTL and CMOS logic levels.

An analog multiplexer is an interface IC that connects multiple signal sources to a shared amplifier, converter, or measurement channel. The MAX369 family belongs to the analog-switch and multiplexer hierarchy, where switch resistance, channel isolation, logic compatibility, fault tolerance, and switching behavior determine signal integrity. A dual 4:1 configuration is useful when a system must alternate among several sensors, instrument channels, or control signals without duplicating the downstream conversion circuitry.

The MAX369EWN+ provides a specified 1.8 kOhm switch resistance and guaranteed break-before-make operation. Break-before-make prevents two input paths from being connected together during channel transitions, an important behavior when routing externally sourced signals. Its fault-protected architecture and latch function help control switch states when abnormal conditions occur. Typical power dissipation is stated as less than 7 mW, supporting low-power portable equipment.

MAX369EWN+ is identified as an industrial-temperature differential multiplexer in an 18-pin SOIC package. The SOIC package supports conventional surface-mount assembly while exposing the selector and control signals directly to the device pins. Because the MAX369 family is designed for portable equipment, system designers should pay particular attention to signal levels, control sequencing, and the interaction between fault protection and downstream amplifier input networks.

Typical uses include battery-powered instrumentation, portable measurement systems, analog test equipment, sensor-selection circuits, and industrial control modules. The dual architecture can support two independent 4:1 switching groups, while TTL- and CMOS-compatible selection inputs simplify connection to microcontrollers, logic controllers, and counter-based channel-selection circuits.

PCB layout should keep selected and unselected signal paths short and should route sensitive analog inputs away from digital selector traces. Verify the complete pin description table in the manufacturer datasheet before assigning PCB tracks, especially for differential inputs, fault-protection pins, and common terminals. Decoupling should follow the manufacturer’s recommended capacitor values and placement instructions.

This page combines the manufacturer’s device positioning with distributor package data, a verified same-family cross-reference, and application-oriented design guidance. It also distinguishes the MAX369EWN+ from reel-packaging notation and identifies the confirmed drop-in alternative without presenting unverified cross-brand parts as direct replacements.

Mga alternatibo na pwedeng ilagay na MAX369EWN+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MAX369CWN

✅ Drop-In
📦 18-SOIC
Uses the C ordering configuration rather than the E configuration; published comparison data identifies matching terminals, package, and functional characteristics with no circuit modification required.

📋 Alternatibo na Reference (hindi sa katalogo)

MAX369EWN+ Mga Spesipikasyon

Product Type Dual 4:1 fault-protected analog multiplexer with latch
Number of Multiplexer Circuits 2 circuits
Configuration Dual 4:1
On-Resistance 1.8 kOhm
Control Logic Compatibility TTL and CMOS compatible
Switching Behavior Guaranteed break-before-make
Typical Power Dissipation <7 mW
Packhaging 18-SOIC
Uri ng Pagpapasok Surface mount
Temperature Grade Industrial
Number of Terminals 16 terminals
Package Shape Rectangular
Analog Signal Type Differential multiplexer
Fault Protection Supported with latch

Gabay sa Pin Configuration ng MAX369EWN+ rectangular

Pin configuration para sa MAX369EWN+ (rectangular package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng rectangular package para sa MAX369EWN+

Wala ng detalyadong pinout data na magagamit para sa MAX369EWN+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX369EWN+ ay nararapat para sa 6 aplikasyons: Portable Sensor Multiplexing, Industrial Test and Measurement, Battery-Powered Instrument, Analog Control Signal Routing, Data Acquisition Front End, Remote Sensor Interface.

📱

Portable Sensor Multiplexing

The MAX369EWN+ fits portable sensor-acquisition systems that must route several analog inputs into a shared amplifier or converter. Its two independent 4:1 sections provide eight switched input positions, while the 1.8 kOhm on-resistance defines the series impedance that must be included in source-load calculations. TTL- and CMOS-compatible controls simplify interfacing with a microcontroller or counter, and typical power dissipation below 7 mW supports low-power operation. Guaranteed break-before-make operation is especially useful when adjacent sensors may drive different signal levels, because it prevents intentional overlap during channel transitions.

🏭

Industrial Test and Measurement

In a compact test instrument, the MAX369EWN+ can select among multiple analog test points and present them to a shared measurement chain. The dual 4:1 organization allows two banks of four sources to be routed independently, reducing duplication in downstream amplification or conversion circuitry. Its 1.8 kOhm on-resistance is a primary design constraint for high-impedance sensors and should be checked against the complete source impedance. The guaranteed break-before-make characteristic helps prevent two test channels from being connected during a transition, improving control of excitation and measurement sequencing.

⚡

Battery-Powered Instrument

The MAX369EWN+ is suited to battery-operated instruments where channel selection must consume little power and support both CMOS and TTL control environments. Its typical power dissipation is specified as less than 7 mW, making the switching stage suitable for compact portable equipment. The dual 4:1 architecture consolidates multiple analog inputs onto fewer downstream signal paths, while fault protection and latch capability provide defined control behavior during abnormal conditions. Designers should still budget input filtering, grounding, and control-driver current in the complete battery budget.

🔧

Analog Control Signal Routing

The MAX369EWN+ can route low-frequency analog control or feedback signals when several sources must feed one actuator or controller input. The 4:1 configuration is suitable for selecting command, calibration, or feedback paths without constructing multiple analog switches. The device’s TTL- and CMOS-compatible selector inputs allow a microcontroller to control channel selection directly. Because the specified on-resistance is 1.8 kOhm, include that impedance when driving a high-impedance control node or reference input, and use the manufacturer’s logic and fault-sequence guidance when changing channels under operating conditions.

🖥️

Data Acquisition Front End

The MAX369EWN+ can serve as the channel-selection stage ahead of an analog-to-digital converter in a multiplexed data-acquisition front end. Two 4:1 banks provide eight analog input connections while leaving only one converter channel per multiplexer group to route. Break-before-make operation supports controlled source changes, and the 1.8 kOhm on-resistance must be included in acquisition-time and signal-accuracy analysis. Layout should minimize trace resistance and capacitance, isolate digital select lines from sensitive analog paths, and follow the manufacturer’s grounding and decoupling recommendations.

🧩

Remote Sensor Interface

The MAX369EWN+ can select remote or locally connected sensor signals before they enter a common conditioning amplifier. This application benefits from guaranteed break-before-make operation because it avoids two active sensor outputs being tied together during a switch transition. The 1.8 kOhm on-resistance can be useful with high-impedance sensor interfaces, although cable capacitance and leakage must also be evaluated. The latch and fault-protection features support defined behavior when an input develops an abnormal condition, while the dual 4:1 organization allows separate positive and differential-related routing where appropriate.

What is the MAX369EWN+?
The MAX369EWN+ is a dual 4:1 fault-protected analog multiplexer with latch capability, on-resistance of 1.8 kOhm, and an 18-SOIC package. Maxim Integrated describes the MAX369 family as a differential multiplexer with TTL- and CMOS-compatible control inputs, guaranteed break-before-make operation, and typical power dissipation below 7 mW. It is intended for routing multiple analog signals into shared downstream circuitry.
How many analog channels can the MAX369EWN+ select?
The MAX369EWN+ provides two independent 4:1 multiplexer circuits, allowing four signal sources to be selected for each channel group. Distributor and manufacturer product descriptions identify the device as a 2-circuit, 4:1 analog switch with a 1.8 kOhm on-resistance. The dual organization is useful when two analog buses must be routed independently while sharing control logic and downstream conversion circuitry.
What does break-before-make operation mean for MAX369EWN+?
Break-before-make operation guarantees that the old channel is disconnected before the new channel connects. Maxim Integrated explicitly lists this behavior as a feature of the MAX369 family. It prevents the newly selected input and the previously selected input from being connected simultaneously during a transition, making the device suitable for systems in which overlapping signal paths could cause contention or unwanted transient behavior.
Where can I download the MAX369EWN+ datasheet PDF?
The official MAX369 product page is the primary location for the manufacturer datasheet and technical information. It identifies the MAX369 as a fault-protected analog multiplexer with latch and provides the family-level device information. The MAX369EWN+ also appears in an 18-SOIC package, so use the MAX369EWN pin-description table and package drawing when laying out the PCB.
Where can I find the MAX369EWN+ pinout?
The MAX369EWN+ pinout is defined in the MAX369 manufacturer datasheet and its MAX369EWN pin-description table. The verified component information confirms an 18-SOIC package, but it does not expose the individual terminal assignments in a form that can be reproduced safely. Use the manufacturer pin table for all 18 connections, including common terminals, selector inputs, and fault-protection functions.
Can MAX369CWN replace MAX369EWN+?
The MAX369CWN is the confirmed drop-in option for MAX369EWN+, using the same 18-SOIC format and compatible terminal arrangement. A published comparison identifies the devices as functionally consistent and pin-compatible without requiring circuit changes. The C and E ordering suffixes distinguish manufacturer ordering configurations, so confirm the required temperature grade and full ordering code before approving a substitution.
MAX369EWN+ vs MAX369CWN: which should be selected?
Choose the MAX369EWN+ when the bill of materials specifically calls for the E ordering configuration; choose the MAX369CWN when its manufacturer ordering conditions meet the design requirement. The MAX369CWN is reported as a direct replacement with consistent terminals, package, and functional characteristics. Both use the same 18-SOIC form, so the decision centers on the required ordering and temperature-grade configuration.
What is the best cross-brand replacement for MAX369EWN+?
No cross-brand drop-in replacement for the MAX369EWN+ has been verified from the available manufacturer and distributor information. The confirmed cross-reference is the same-family MAX369CWN, which retains the 18-SOIC package and terminal arrangement. A second-brand candidate should be accepted only after its pin functions, 1.8 kOhm-class switch resistance, break-before-make behavior, fault-protection function, logic levels, and supply ratings have all been checked against the original design.
When should I choose MAX369EWN+ instead of MAX369CWN?
Choose the MAX369EWN+ when purchasing and lifecycle records require that exact E-configured manufacturer part, particularly when the system qualification record names it directly. Choose the MAX369CWN only after confirming that its C configuration satisfies the required temperature grade, production status, and documentation needs. The confirmed compatibility means the footprint does not change, but ordering-code requirements can still determine the correct selection.
Is MAX369EWN+ suitable for portable measurement equipment?
The MAX369EWN+ is suitable for portable equipment when its switching architecture matches the measurement design. Maxim Integrated highlights TTL- and CMOS-compatible controls, guaranteed break-before-make operation, and typical power dissipation below 7 mW as suitable characteristics for portable applications. Its dual 4:1 organization can reduce the number of downstream amplifiers or converters when several sensors share a common acquisition path.
How should MAX369EWN+ control inputs be driven?
The MAX369EWN+ channel-selection and control inputs are compatible with both TTL and CMOS logic levels. This allows direct control from common microcontrollers, counters, or CMOS control logic while also supporting legacy TTL systems. The manufacturer datasheet remains the controlling reference for static logic thresholds, allowed transition sequences, and the exact terminal assigned to each selector function.
What should be checked before using MAX369EWN+ with an external amplifier?
Check the selected input voltage range, downstream amplifier input limits, switch leakage, off isolation, and the effect of the 1.8 kOhm on-resistance on signal amplitude. The MAX369EWN+ uses guaranteed break-before-make operation, but the overall measurement path must still prevent two externally driven sources from being connected together. Verify fault-protection behavior and latch requirements against the system’s fault-response sequence before finalizing the circuit.
Where can I buy MAX369EWN+ online?
Use the Request a Quote form on this page to request MAX369EWN+ availability, current lead time, and the appropriate packaging quantity. The MAX369EWN+ is listed by authorized distribution channels under the same 18-SOIC device description, but live stock and order quantities can change. The quote form provides the correct path for a current commercial response for the exact ordering code.
What is the price of MAX369EWN+?
Request the current MAX369EWN+ price through the Request a Quote form on this page. Pricing depends on order quantity, package form, and current component availability, so a static figure would not reflect a live quotation. The form lets you request the exact MAX369EWN+ ordering code and receive a response for the quantity required by your build.
What is the lead time and stock status for MAX369EWN+?
Request current MAX369EWN+ stock and lead time through the Request a Quote form on this page. Distributor listings show orderable inventory for the MAX369 family, but allocation and delivery timing vary with quantity and purchasing conditions. A current quote response is therefore preferable to treating a search listing as a guaranteed allocation for a production build.
What are the key specifications of MAX369EWN+ that engineers should know?
The key MAX369EWN+ specifications are its dual 4:1 configuration, 1.8 kOhm on-resistance, TTL- and CMOS-compatible control inputs, guaranteed break-before-make switching, fault protection with latch, typical power dissipation below 7 mW, and 18-SOIC package. These characteristics make it useful for portable and industrial analog-routing systems. Confirm supply voltage, signal range, temperature limits, leakage, isolation, and timing from the manufacturer datasheet.

Impormasyon ng Talumpati sa Engineering for MAX369EWN+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Select the MAX369EWN+ when the production BOM, qualification record, or purchasing system requires the E-configured ordering code. Its dual 4:1 architecture is appropriate for routing multiple analog inputs into shared downstream circuitry, while the 1.8 kOhm on-resistance, TTL/CMOS-compatible controls, fault protection, latch capability, and guaranteed break-before-make operation support controlled signal selection. The MAX369CWN is the confirmed drop-in option when its ordering configuration and documentation satisfy the design requirements. It uses the same 18-SOIC package and compatible terminal arrangement, so no PCB change is expected. No cross-brand equivalent has been validated for the required footprint and protection behavior. For either ordering configuration, verify supply limits, signal range, temperature requirements, leakage, isolation, and timing against the manufacturer datasheet before approving the part for production.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX369CWN
Brand Maxim Integrated Maxim Integrated
Package 18-SOIC 18-SOIC
Product Type Dual 4:1 fault-protected analog multiplexer with latch Dual 4:1 fault-protected analog multiplexer with latch
Number of Multiplexer Circuits 2 circuits 2 circuits
On-Resistance 1.8 kOhm 1.8 kOhm
Control Logic Compatibility TTL and CMOS compatible TTL and CMOS compatible
Switching Behavior Guaranteed break-before-make Guaranteed break-before-make
Typical Power Dissipation <7 mW <7 mW

Pangunahing mga Pagkakaiba

  • Confirmed same-package direct replacement (kumpara saMAX369CWN)
  • Dual independent 4:1 routing in one device (kumpara saMAX369CWN)
  • Controlled transitions between analog sources (kumpara saMAX369CWN)
  • Portable-equipment power characteristics (kumpara saMAX369CWN)

Talaan ng Disenyo

Include the 1.8 kOhm on-resistance in the complete source-to-load transfer function. For a resistive source, the MAX369EWN+ divides the selected signal according to the switch resistance and input impedance of the following stage. Use short analog traces, a nearby return path, and a quiet ground reference so that selector-transition coupling does not appear as a false measurement at the multiplexer output.

Route the selected analog signals away from the digital select lines and place any filtering components close to the connector or source they protect. Keep supply decoupling close to the device and follow the manufacturer’s recommended capacitor values and placement. Because this is an 18-SOIC device with sensitive analog routing, verify every terminal against the MAX369EWN pin table before assigning nets or releasing the PCB artwork.

Do not assume that two multiplexed sources can be connected safely even though the device uses break-before-make operation. External drivers, amplifiers, or test fixtures can still create contention if their outputs remain active independently of the switch. Design the system so that only one source drives a shared path at a time, and use the fault-protection and latch functions according to the manufacturer’s specified operating sequence.

Budget the switching circuit’s power loss using the manufacturer’s typical figure of less than 7 mW and the actual supply voltage, selected resistance, and load current. Estimated power in the closed switch is P = I²R, using the 1.8 kOhm on-resistance. Keep this estimate separate from the device’s total typical power-dissipation specification and verify worst-case conditions during channel transitions and fault events.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 qualification statement was identified for the MAX369EWN+. The AEC-Q100 field is not applicable because this is an industrial analog interface IC rather than an automotive-qualified device.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX369EWN+ datasheet MAX369EWN+ pinout MAX369EWN+ datasheet pdf MAX369EWN+ equivalent MAX369EWN+ replacement MAX369EWN+ cross reference MAX369EWN+ vs MAX369CWN MAX369EWN+ price MAX369EWN+ stock Maxim Integrated MAX369EWN+ MAX369EWN+ 1.8kOhm multiplexer MAX369EWN+ 18-SOIC footprint

Mga kaugnay na Mga Komponente at mga Tuntunin

Maxim Integrated MAX369EWN+ MAX369CWN MAX369 dual 4:1 analog multiplexer differential multiplexer analog switch multiplexer interface IC semiconductor 1.8 kOhm on-resistance break-before-make switching fault protection latch TTL-compatible control input CMOS-compatible control input 18-SOIC SOIC package family surface-mount device analog signal routing portable instrumentation industrial test equipment data acquisition channel selection
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ