MAX388CWG+ - 8:1 18V Analog Multiplexer | Analog Devices
MPN: MAX388CWG+ ✓ NakahandaMAX388CWG+ Ulas
An analog multiplexer is an interface IC that connects multiple signal paths to a shared processing channel through controlled switches. The MAX388CWG+ belongs to the broader multiplexer and switch family within the semiconductor hierarchy. By selecting one of eight inputs for a common output, it can reduce the number of dedicated input channels required by a measurement, control, or signal-routing system while preserving a compact PCB footprint.
Key specifications include an 8:1 multiplexing configuration, one multiplexed function, eight channels, 3 kohm on-state resistance, and operation from 4.5V to 18V. The CMOS implementation supports integration with digital control logic, while the 24-pin SOIC package is compatible with conventional surface-mount assembly. The MAX388CWG+ is identified as a commercial-temperature-grade part for general-purpose equipment applications.
The MAX388CWG+ is based on a single-ended analog switching arrangement rather than a differential multiplexer. This makes it suitable when the system has one common signal bus and multiple inputs to route, provided that the source impedance and downstream amplifier account for the 3 kohm on resistance. The 4.5V to 18V supply span gives designers room for both lower-voltage precision systems and higher-voltage industrial signal environments.
Typical applications include automated test equipment, data-acquisition systems, instrumentation control, industrial measurement interfaces, battery and power-system monitoring, and signal routing in industrial controllers. The eight-input structure is especially useful when a controller must inspect several sensors or conditioned analog channels through one shared converter or measurement front end.
A key design consideration is that every signal passing through the selected switch sees the device's 3 kohm on-state resistance. Source impedance, amplifier bias current, capacitance, settling time, and injected noise should therefore be evaluated together. Keep routed analog traces short, maintain a common ground reference, and place input and supply bypassing close to the device to preserve measurement stability.
This product page consolidates the MAX388CWG+ electrical identity, ordering-code distinction, sourcing information, and application guidance. It also provides the practical selection criteria and design considerations needed to determine whether this 8:1 CMOS multiplexer is appropriate for a particular analog-routing architecture.
Mga alternatibo na pwedeng ilagay na MAX388CWG+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MAX388CWG
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MAX388CWG+ Mga Spesipikasyon
| Multiplexer Configuration | 8:1 |
| Number of Circuits | 1 circuit |
| Number of Channels | 8 channels |
| Signal Configuration | Single-ended |
| On-State Resistance | 3 kohm |
| Supply Voltage Range | 4.5V to 18V |
| Technology | CMOS |
| Number of Terminals | 24 terminals |
| Package Type | 24-pin SOIC |
| Package Code | PDSO24 |
| Package Shape | Rectangular |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Commercial |
| Switch Type | Analog switch multiplexer |
| Common Terminal | 1 common terminal |
| Input Pin Count | 8 input terminals |
Gabay sa Pin Configuration ng MAX388CWG+ rectangular
Pin configuration para sa MAX388CWG+ (rectangular package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX388CWG+.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX388CWG+ ay nararapat para sa 6 aplikasyons: Automated Test Equipment, Data Acquisition Systems, Industrial Sensor Multiplexing, Instrumentation Signal Routing, Power-System Monitoring, Programmable Control Interfaces.
Automated Test Equipment
The MAX388CWG+ is appropriate for automated test equipment that must route several test points to a shared measurement channel. Its 8:1 configuration connects eight single-ended sources through one common path, reducing the number of analog front-end inputs required by the controller. According to the Maxim Integrated manufacturer datasheet, the device provides a 3 kohm on-state resistance and operates from 4.5V to 18V. The 24-pin SOIC package supports compact surface-mount instrumentation. Designers should account for switch resistance when calculating source-to-measurement accuracy, particularly when driving a high-input-impedance amplifier. Keep the common trace short and provide local supply bypassing to reduce pickup and maintain predictable settling during repeated test-sequence changes.
Inirekomenda
Data Acquisition Systems
The MAX388CWG+ can consolidate eight single-ended analog inputs onto one shared acquisition path. Its 8:1 architecture is useful in data-acquisition equipment where multiple sensors or conditioned measurement channels must be selected sequentially. According to the Maxim Integrated manufacturer datasheet, the MAX388CWG+ has 3 kohm on-state resistance and a 4.5V to 18V operating range. The 24-pin SOIC package allows the multiplexer to be placed near the analog connector or sensor interface. Source impedance and downstream amplifier input impedance should be evaluated together because switch resistance contributes directly to signal attenuation and thermal noise. A low-noise reference return and short analog routing path help preserve the accuracy expected from a multiplexed acquisition system.
Inirekomenda
Industrial Sensor Multiplexing
The MAX388CWG+ fits industrial sensor-multiplexing boards that must read multiple conditioned inputs through a shared controller or converter. Its eight-channel, single-ended arrangement supports routing, while the 4.5V to 18V supply range accommodates systems operating above basic logic voltage levels. According to the Maxim Integrated manufacturer datasheet, the device is a 24-pin SOIC commercial-grade part. Place it close to the sensor inputs to minimize trace pickup, and keep digital control signals away from sensitive analog paths. Because the on-state resistance is 3 kohm, verify that sensor drive current and amplifier bias do not create unacceptable offset or settling errors. The package footprint also makes the device practical for densely populated industrial controller boards.
Inirekomenda
Instrumentation Signal Routing
The MAX388CWG+ is well suited to instrumentation that selects one of eight single-ended sources for a shared measurement amplifier. The 8:1 configuration allows a programmable instrument to examine multiple inputs without requiring eight separate front-end channels. According to the Maxim Integrated manufacturer datasheet, the device operates across 4.5V to 18V and presents a 3 kohm on resistance. Its 24-pin SOIC package is suitable for surface-mounted measurement platforms. Designers should check the complete timing and channel characteristics in the manufacturer datasheet before setting a high sampling rate, and should include the switch resistance when calculating gain and input-referred noise. Grounding and bypassing are especially important around low-level sensor measurements.
Inirekomenda
Power-System Monitoring
The MAX388CWG+ can route monitored voltages from eight sources into a common measurement channel in power-system and battery-monitoring equipment. Its 4.5V to 18V operating range supports broader supply architectures than low-voltage-only multiplexers, while the single-ended 8:1 topology fits systems with one common return. According to the Maxim Integrated manufacturer datasheet, the device is a CMOS analog multiplexer in a 24-pin SOIC package. The stated 3 kohm on resistance must be included in divider and amplifier calculations for accuracy. Engineers should also verify absolute maximum input limits and fault behavior from the datasheet when connected to external power rails or unprotected measurement nodes.
Inirekomenda
Programmable Control Interfaces
The MAX388CWG+ supports programmable analog interfaces in which a controller selects among eight signal sources. This arrangement is useful in equipment with multiple test, control, or feedback channels that share one downstream converter. According to the Maxim Integrated manufacturer datasheet, the MAX388CWG+ is a single-ended 8:1 CMOS multiplexer with a 4.5V to 18V supply range and 3 kohm on resistance. The 24-pin SOIC package facilitates compact assembly. Design the control sequence so the selected source remains stable during conversion, and account for switch-transition effects when changing channels. Local decoupling, a continuous return plane, and separation from high-current switching nodes will help maintain signal quality in the completed control system.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX388CWG+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MAX388CWG |
|---|---|---|
| Package | 24-pin SOIC | 24-pin SOIC |
| Brand | Analog Devices | Analog Devices |
| Multiplexer Configuration | 8:1 | 8:1 |
| Number of Channels | 8 | 8 |
| Number of Circuits | 1 | 1 |
| Signal Configuration | Single-ended | Single-ended |
| On-State Resistance | 3 kohm | 3 kohm |
| Supply Voltage Range | 4.5V to 18V | 4.5V to 18V |
| Technology | CMOS | CMOS |
| Terminal Count | 24 | 24 |
| Mounting Type | Surface mount | Surface mount |
Pangunahing mga Pagkakaiba
- Same-footprint ordering option (kumpara saMAX388CWG)
- Eight-input consolidation (kumpara saMAX388CWG)
- Wide supply range (kumpara saMAX388CWG)
Talaan ng Disenyo
Include the MAX388CWG+ on-state resistance of 3 kohm when calculating the voltage division between the source impedance, the selected switch, and the receiver impedance. A high-impedance downstream amplifier will generally make the switch resistance less significant than a low-impedance input. Also include amplifier bias current across the switch resistance when estimating DC offset, and verify settling time in the complete measurement chain.
Place the MAX388CWG+ close to the common analog node to minimize trace length and susceptibility to capacitive pickup. Route the eight input channels away from switching power nodes and digital control signals, and maintain a continuous ground reference beneath the analog paths. Supply decoupling should be placed at the device pins according to the manufacturer datasheet layout guidance to keep the 4.5V to 18V operating range from becoming a source of measurement instability.
Do not treat the 18V supply rating as permission to apply 18V to every signal input. Check the absolute maximum ratings, analog input limits, and fault-protection conditions in the Maxim Integrated manufacturer datasheet for the specific operating mode. Also avoid assuming that the 8:1 switch is a differential selector; the MAX388CWG+ is a single-ended multiplexer and its common connection must match the downstream circuit architecture.
Impormasyon ng Pagsunod sa Kautusan
The commercial-grade MAX388CWG+ information identifies a 24-pin SOIC interface IC; no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was established for this ordering code.