ADM237LAR - 5V 120kbps RS-232 Transceiver | Analog Devices
MPN: ADM237LAR ✗ Tapus ng BuhayADM237LAR Ulas
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. The RS-232 interface belongs to the broader interface-IC and data-communication semiconductor categories. It is intended for point-to-point serial links between computers, industrial controllers, test equipment, and peripheral systems where single-ended logic cannot directly meet the EIA-232-E and V.28 voltage requirements.
The ADM237LAR combines five transmit channels and three receive channels, allowing several communications ports to share one package. Its 120 kB/s maximum data rate supports moderate-speed control and instrumentation links. Operation from a single 4.75 V to 5.25 V supply simplifies system power design because the integrated converters generate the bipolar voltage levels needed by RS-232 drivers without requiring a separate negative supply rail.
The onboard DC-DC architecture is a key technical feature because it separates the device's 5 V supply requirement from the higher-amplitude RS-232 signal levels. This allows the IC to operate from common 5 V logic systems while maintaining approximately ±9 V driver swing. The CMOS implementation combines this voltage-generation capability with a 24-lead surface-mount package suitable for compact equipment.
Typical applications include industrial serial controllers, laboratory data-logging equipment, point-of-sale systems, security equipment, and embedded service interfaces. The five-driver, three-receiver arrangement is particularly useful when a system needs multiple unidirectional outputs and several inputs on the same RS-232 port. Its 120 kB/s limit should be treated as the design ceiling when choosing cable length, baud rate, and protocol timing.
The main design consideration is that ADM237LAR is listed as obsolete. Existing equipment can be maintained with this device when exact functional continuity is required, but new designs should evaluate a current interface product and confirm pin compatibility, supply requirements, and driver direction assignments before making any substitution. Use the manufacturer pin-description table when assigning PCB tracks and connecting external charge-pump capacitors.
This page combines the device's key RS-232 characteristics, lifecycle status, sourcing information, and engineering guidance with comparison-oriented selection criteria. It helps designers distinguish the ADM237LAR from lower-speed, higher-voltage, or differently pinned interface circuits while emphasizing the need for schematic-level verification before replacement.
Mga alternatibo na pwedeng ilagay na ADM237LAR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ADM237LAR (parehas na form factor at footprint) — pagkakaiba sa Output Swing, Package, Product Type.
ADM237LAN
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →ADM237LARZ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ADM237LARZ-R7
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ADM237LAR Mga Spesipikasyon
| Product Type | 5/3 RS-232 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Nominal Supply Voltage | 5 V |
| Rate ng Data | 120 kB/s maximum |
| Driver Count | 5 |
| Receiver Count | 3 |
| Output Swing | Approximately ±9 V |
| Integrated Voltage Conversion | Onboard DC-DC converters |
| Logic Standard | CMOS |
| Interface Standard | EIA-232-E and V.28 |
| Packhaging | 24-pin SOIC |
| Uri ng Pagpapasok | Surface mount |
| Katayuan ng Lifecycle | Obsolete |
Gabay sa Pin Configuration ng ADM237LAR 24-pin soic
Pin configuration para sa ADM237LAR (24-pin soic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ADM237LAR.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ADM237LAR ay nararapat para sa 6 aplikasyons: Industrial RS-232 Controllers, Laboratory Data-Logging Equipment, Point-of-Sale and Peripheral Systems, Security and Access-Control Systems, Embedded Service Interfaces, Serial Test and Measurement Fixtures.
Industrial RS-232 Controllers
The ADM237LAR fits industrial controllers that require several point-to-point RS-232 channels on a single logic board. Its five drivers and three receivers allow one 24-pin SOIC to replace multiple separate line-interface circuits, while operation from 4.75 V to 5.25 V simplifies integration with 5 V control electronics. The maximum 120 kB/s data rate is suitable for command, status, and sensor traffic rather than high-volume video transfer. Because the part is obsolete, it is most appropriate for maintaining an existing controller or reproducing a proven legacy design after checking device qualification and long-term sourcing.
Inirekomenda
Laboratory Data-Logging Equipment
The ADM237LAR can support laboratory instruments that exchange commands and measurement records through RS-232. A 120 kB/s maximum rate is adequate for many short control and logging packets, while the 5/3 channel arrangement can handle multiple instrument outputs and computer inputs. Its onboard DC-DC converters eliminate the need for a separate negative rail, making the interface practical in compact 5 V instruments. When laying out the board, place the device near the connector and use a short return path to limit noise coupling into sensitive measurement circuitry.
Inirekomenda
Point-of-Sale and Peripheral Systems
The ADM237LAR is suitable for legacy point-of-sale equipment in which several peripherals share a common RS-232 interface structure. Five driver channels can support independent outbound connections, while three receiver channels handle inbound device responses. The 120 kB/s limit is appropriate for transactional commands and status traffic but should be checked against burst size and response timing. Its 24-pin SOIC package permits compact surface-mount assembly, and integrated DC-DC conversion means the surrounding electronics can use a single 5 V supply rather than a separate bipolar rail.
Inirekomenda
Security and Access-Control Systems
The ADM237LAR can be used in legacy access-control panels that need multiple RS-232 links for readers, controllers, or service equipment. Its 5/3 configuration reduces the number of interface packages needed when several unidirectional links are required, while the 4.75 V to 5.25 V operating range supports conventional 5 V embedded systems. The 120 kB/s data rate is more than sufficient for typical commands and short status records. Designers should protect the external RS-232 connector appropriately and verify line protection requirements separately from the IC's internal driver specifications.
Inirekomenda
Embedded Service Interfaces
The ADM237LAR is useful in embedded service equipment that exposes configuration and diagnostic ports through RS-232. Five transmit and three receive channels allow a single device to support several service connections or unidirectional command paths, and the 120 kB/s maximum rate suits firmware-download and diagnostic traffic at moderate speeds. Integrated DC-DC converters simplify the supply arrangement by deriving the required bipolar driver levels from 5 V. Because the ADM237LAR is obsolete, maintenance teams should preserve the original footprint and pin functions when exact compatibility is necessary.
Inirekomenda
Serial Test and Measurement Fixtures
The ADM237LAR can support test fixtures that communicate with instruments or boards over several RS-232 ports. Its five drivers permit multiple command outputs, while three receivers can collect responses from more than one endpoint. The 120 kB/s limit suits low- and moderate-speed automated test sequences with short command frames. Running from 4.75 V to 5.25 V allows straightforward integration into common 5 V test fixtures, and onboard DC-DC converters reduce supply complexity. Place decoupling close to the device and route RS-232 outputs away from sensitive analog sections to minimize coupling.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ADM237LAR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ADM237LAN | ADM237LARZ | ADM237LARZ-R7 |
|---|---|---|---|---|
| Package | SOIC-24 | SOIC-24 | SOIC-24 | SOIC-24 |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Device Type | 5/3 RS-232 transceiver | 5/3 RS-232 transceiver | 5/3 RS-232 transceiver | 5/3 RS-232 transceiver |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Maximum Data Rate | 120 kB/s | 120 kB/s | 120 kB/s | 120 kB/s |
| Driver Count | 5 | 5 | 5 | 5 |
| Receiver Count | 3 | 3 | 3 | 3 |
| Output Swing | Approximately ±9 V | Approximately ±9 V | Approximately ±9 V | Approximately ±9 V |
| Integrated DC-DC Converters | Yes | Yes | Yes | Yes |
| Interface Standards | EIA-232-E and V.28 | EIA-232-E and V.28 | EIA-232-E and V.28 | EIA-232-E and V.28 |
Pangunahing mga Pagkakaiba
- Five transmit channels and three receive channels in one package (kumpara saADM232AARWZ)
- Single 5 V supply with integrated bipolar voltage generation (kumpara saADM232AARWZ)
- Direct family continuity for existing 24-pin designs (kumpara saADM237LARZ)
Talaan ng Disenyo
Place the ADM237LAR close to the RS-232 connector and route each driver and receiver trace as a short point-to-point path. Keep the logic-side connections away from the high-swing RS-232 nets to reduce capacitive coupling. Use a continuous ground reference and avoid sharing narrow return paths between the interface connector and sensitive circuitry.
Connect the 5 V supply and ground pins using short, low-impedance traces, and place the manufacturer's recommended local capacitors directly beside the corresponding pins. The onboard DC-DC converters generate the bipolar voltage required by the drivers, so supply layout should minimize switching-current loops. Confirm capacitor voltage rating, tolerance, and placement against the datasheet typical application circuit before release.
Do not treat the ADM237LAN, ADM237LARZ, or ADM237LARZ-R7 ordering variants as interchangeable until their temperature, qualification, marking, and lifecycle details have been checked. The channel direction and enable behavior must also be compared with the original schematic. A shared 24-pin SOIC outline alone does not prove identical lead functions or external component requirements.
For RS-232 links operating near the 120 kB/s maximum, use a clean ground reference and route the cable-side nets away from clocks, relays, switching regulators, and high-current return paths. Avoid long stubs and unnecessary vias on signal nets. If an enclosure cable is long or adjacent to noisy equipment, evaluate external protection and filtering separately from the transceiver's internal receiver characteristics.
Impormasyon ng Pagsunod sa Kautusan
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. The ADM237LAR is listed as obsolete. Check the manufacturer product documentation, material declaration, and the ordering code of any proposed replacement.