Analog Devices

MAX389CWG+ - 4:1 Fault-Protected Analog MUX | Analog Devices

MPN: MAX389CWG+ ✓ Nakahanda
3 kOhm Rds(on) 24-SOIC Package
MOQ: 1 |

MAX389CWG+ Ulas

The Analog Devices MAX389CWG+ is a dual-circuit, 4:1 analog multiplexer in a 24-pin SOIC package, featuring a 3 kOhm on-resistance and fault-protected high-voltage analog switching. Its two independent switch circuits make it suitable for routing multiple analog signals through a shared measurement or control channel without introducing an external discrete protection network. The manufacturer positions the MAX389 family as high-voltage, fault-protected analog multiplexers.

An analog multiplexer is a switching interface that connects one of several inputs to a shared output. In the signal-chain hierarchy, the MAX389CWG+ belongs to the analog switch and multiplexer category, where fault protection and high-voltage tolerance help isolate external circuitry from downstream measurement channels. The 24-SOIC footprint provides a conventional surface-mount option for instrumentation, industrial control, and test equipment designs.

Key features include two switching circuits, a 4:1 configuration, and 3 kOhm on-resistance. The 4:1 arrangement allows four input paths to be selected for each of two circuits, while the fault-protected architecture is intended to improve system robustness when connected to external analog sources. Its surface-mount SOIC package supports automated assembly and compact PCB layouts, although the relatively long 24-pin footprint requires more board area than modern leadless packages.

MAX389 devices are used where analog signals must be routed before measurement, excitation, conversion, or control. Typical signal types include sensor outputs, external test points, and conditioned analog inputs. The integrated protection function is especially relevant when a selected channel connects to a source that may carry a higher voltage than the downstream circuitry expects. Board design must still include suitable grounding, decoupling, and protection around the selected pins.

Typical applications include automated test equipment, process-control interfaces, laboratory measurement systems, data acquisition modules, and industrial sensor-conditioning boards. The 24-pin SOIC package is appropriate where a proven through-hole-style lead arrangement and external prototyping access are more valuable than minimum board area.

When laying out the PCB, route each mux channel as a short, guarded analog trace and place input protection close to the connector. Confirm the absolute maximum ratings and switch-state behavior in the manufacturer datasheet before applying external voltages. This page consolidates package details, sourcing guidance, drop-in alternatives, and practical layout considerations for engineers evaluating the MAX389CWG+.

Mga alternatibo na pwedeng ilagay na MAX389CWG+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MAX389CWG

✅ Drop-In
📦 24-SOIC
Identical 2-circuit 4:1 architecture and 3 kOhm on-resistance; '+' lead-free ordering designation is absent, so check temperature-grade requirements

📋 Alternatibo na Reference (hindi sa katalogo)

MAX389CSE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 24-SOIC
Same MAX389 family, 4:1 multiplexing architecture, and 24-SOIC footprint; extended-temperature and exact ordering-code differences require verification

📋 Alternatibo na Reference (hindi sa katalogo)

MAX389CWE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 24-SOIC
Same MAX389 family and 24-SOIC pin arrangement; different operating-temperature suffix and ordering code

📋 Alternatibo na Reference (hindi sa katalogo)

MAX389EEE+

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 24-SOIC
Same MAX389 4:1 multiplexer family and 24-SOIC footprint; package ordering code and temperature grade differ

📋 Alternatibo na Reference (hindi sa katalogo)

MAX389CWG-T

✅ Drop-In
📦 24-SOIC
Identical electrical and pin configuration with a tape-and-reel shipping option; commercial packing differs from the target

📋 Alternatibo na Reference (hindi sa katalogo)

MAX389CWG+ Mga Spesipikasyon

Number of Circuits 2 circuits
Multiplexer Configuration 4:1
On-Resistance 3 kOhm
Bilang ng Pins 24 pins
Packhaging 24-SOIC
Uri ng Pagpapasok Surface Mount
Product Type High-voltage, fault-protected analog multiplexer
Switch Type 4:1 analog multiplexer
Number of Channels 2 switching circuits
Supported Signal Type Analog
Fault Protection Integrated fault-protected switching

Gabay sa Pin Configuration ng MAX389CWG+ 24-soic

Pin configuration para sa MAX389CWG+ (24-soic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 24-soic package para sa MAX389CWG+

Wala ng detalyadong pinout data na magagamit para sa MAX389CWG+.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MAX389CWG+ ay nararapat para sa 6 aplikasyons: Automated Test Equipment Signal Routing, Industrial Sensor Multiplexing, Data Acquisition and Lab Instrumentation, Process Control Interface Boards, Battery-Powered Measurement Modules, Mixed-Signal Peripheral and Communication Cards.

🖥️

Automated Test Equipment Signal Routing

The MAX389CWG+ fits automated test systems that must connect several analog test points to shared measurement circuitry. Its two 4:1 switching circuits permit multiple source paths to be selected with a relatively compact control interface. The 3 kOhm on-resistance must be treated as part of the measurement-source impedance, so buffered sensor outputs or appropriately terminated inputs will improve accuracy. Fault-protected high-voltage switching is valuable when a fixture accidentally presents a higher-than-expected voltage to a selected channel.

🏭

Industrial Sensor Multiplexing

The MAX389CWG+ can consolidate several analog sensor outputs before they reach a controller or converter. Two independent 4:1 sections are useful when a board must monitor multiple pressure, temperature, or position sensors without purchasing separate switch ICs. Designers should calculate the divider formed by sensor impedance and the 3 kOhm mux resistance, then account for leakage, settling time, and channel crosstalk. Placing the device near the sensor connectors also reduces susceptibility to electrically noisy board-trace pickup.

🧩

Data Acquisition and Lab Instrumentation

The MAX389CWG+ is appropriate for laboratory and bench instrumentation that selects among external inputs, calibration sources, or reference voltages. The dual 4:1 arrangement allows the instrument to switch two groups of sources while keeping the board population low. Its 3 kOhm on-resistance may require a high-impedance buffer for very accurate attenuation measurements, and the selected source should be allowed to settle before conversion. Use a grounded guard structure around sensitive analog traces to maximize off-channel rejection.

⚡

Process Control Interface Boards

The MAX389CWG+ supports industrial control boards that must choose among pressure, flow, level, or valve-feedback signals. The two switching circuits can reduce the number of dedicated analog routing components, while the fault-protected construction improves robustness at interfaces exposed to field wiring. Keep protection elements near the field connector and separate switching-current paths from precision sensor returns. Verify the control-loop bandwidth against the mux's settling behavior and include a hold interval before sampling the selected channel.

📱

Battery-Powered Measurement Modules

The MAX389CWG+ can reduce the number of analog switches required in a compact multi-channel measurement module. Its two 4:1 sections let one ADC input path serve several analog sources, reducing board area and routing complexity in a portable enclosure. Low-power designs should account for both the mux quiescent current and the power consumed by external buffers. Long PCB traces and high source impedance can also increase settling error, so use local buffering when the sensor output impedance is high.

🌐

Mixed-Signal Peripheral and Communication Cards

The MAX389CWG+ is useful on legacy-style mixed-signal peripheral boards that combine several external analog interfaces with digital control. Two 4:1 selectors can route incoming or outgoing analog lines without duplicating wide-area routing. The 24-SOIC package offers accessible pins for prototype probing and straightforward automated assembly. Because the mux and surrounding circuitry may sit near a digital interface, use a single ground reference, avoid routing switch-control signals beneath analog inputs, and test both active and inactive channels for crosstalk.

What is the MAX389CWG+ used for?
The MAX389CWG+ is a dual-circuit, 4:1 analog multiplexer used to route analog signals through shared downstream circuitry. According to the manufacturer datasheet, the MAX389 family provides high-voltage, fault-protected analog multiplexing, while distributor technical summaries identify the device as two 4:1 switch circuits with 3 kOhm on-resistance. It is especially useful in test equipment, data-acquisition systems, and sensor interfaces.
How many circuits and channels does the MAX389CWG+ have?
The MAX389CWG+ contains two switching circuits, each configured as a 4:1 analog multiplexer. The 24-SOIC package therefore provides two independent analog routing sections rather than a single signal path. Confirm the exact select-pin truth table and common-pin arrangement in the manufacturer datasheet before laying out control logic, because the two circuits are not automatically tied to a common select signal.
What is the on-resistance of the MAX389CWG+?
The MAX389CWG+ has a nominal on-resistance of 3 kOhm, as identified in the manufacturer product and distributor listings. This resistance forms part of the signal path and should be included in source-impedance and gain-error calculations. The manufacturer datasheet is the controlling document for test conditions, maximum resistance, matching, and variation across the operating voltage and temperature ranges.
Where can I download the MAX389CWG+ datasheet PDF?
The MAX389CWG+ datasheet is published by Analog Devices under the MAX389/MAX390 family documentation. Download the PDF from the Analog Devices product-document link on this page and use its pin-description table, absolute-maximum-rating section, and truth table when designing the PCB. The '+' suffix denotes lead-free/RoHS-compliant ordering information, so confirm the exact ordering code when placing a purchase.
What package does the MAX389CWG+ use?
The MAX389CWG+ is packaged in a 24-pin SOIC with a surface-mount termination. The 'W' package code identifies the SOIC option in Maxim's ordering convention, while 'G' identifies the industrial temperature grade. Its 24-pin count matches the 24-SOIC package library entry used for the pin diagram on this page. Verify mechanical dimensions against the package drawing in the manufacturer datasheet.
Is the MAX389CWG+ pin compatible with MAX389CWG?
MAX389CWG is a closely related ordering code for the same 24-SOIC multiplexed-switch family, and the two are generally used as pin-compatible alternatives when temperature grade and ordering requirements permit. The '+' designation identifies the lead-free ordering option. Review the manufacturer datasheet for the exact temperature grades and operating limits before accepting the lower-grade part in a design requiring extended-temperature operation.
What is the best drop-in replacement for the MAX389CWG+?
The closest same-family drop-in choices are MAX389CWG and the 24-pin MAX389CSE+ ordering variants, which retain the 4:1 multiplexing architecture and the same SOIC footprint. There is no verified cross-brand drop-in equivalent in the retrieved cross-reference results, so do not assume that a different manufacturer's 4:1 mux has identical fault-protection behavior or pin mapping. Request a quote on this page for current availability of the original MPN.
When should I choose the MAX389CWG+ over a generic analog multiplexer?
Choose the MAX389CWG+ when an external analog source needs both 4:1 routing and integrated fault protection in a 24-pin SOIC footprint. A generic 4:1 mux may provide lower on-resistance or a smaller package, but it may not match the MAX389 family's protection characteristics. The 3 kOhm on-resistance also makes source-impedance accuracy a priority when designing the analog front end.
Is the MAX389CWG+ suitable for high-voltage test equipment?
The MAX389CWG+ is positioned by the manufacturer as a high-voltage, fault-protected analog multiplexer, making it relevant to test and measurement equipment. Suitability for a specific application depends on the selected channel's absolute maximum ratings, supply conditions, and fault-recovery behavior in the datasheet. Use the Request a Quote form on this page for sourcing information, and validate every external input against those ratings.
Can the MAX389CWG+ replace MAX390 family devices?
The MAX389 and MAX390 are related Maxim high-voltage multiplexers, but you should not treat them as automatic drop-in replacements without checking the pinout and truth table. The retrieved listings for the MAX389CWG+ specifically identify a 2-circuit, 4:1 switch configuration. Use the manufacturer pin-description and switching tables to compare logic polarity, common pins, and protection behavior before substituting a different family member.
How do I design the PCB layout for the MAX389CWG+?
Place input protection and connector circuitry close to the relevant mux pins, and keep each analog route short and away from digital switching traces. Use a continuous ground reference beneath the analog region and follow the manufacturer's decoupling guidance. Because the mux has 3 kOhm on-resistance, long traces and high-impedance sources can increase attenuation; verify the completed layout for crosstalk and off-channel rejection.
Where can I buy the MAX389CWG+ online?
The MAX389CWG+ can be ordered through the Request a Quote form on this page, which routes your requirement to the XAIPART sales team for current sourcing. The manufacturer is Analog Devices, and distributor listings identify the part as a 24-SOIC, two-circuit 4:1 analog switch with 3 kOhm on-resistance. Request the current lead time, minimum order quantity, and delivery schedule with your quote request.
What is the price of the MAX389CWG+?
Pricing for the MAX389CWG+ is generated dynamically and may vary with quantity, sourcing channel, and market conditions. Use the Request a Quote form on this page for a current unit-price quotation and volume-break review. The part is a catalog item with a manufacturer datasheet, so a current commercial response can cover single-piece prototype needs as well as production quantities.
What is the lead time for the MAX389CWG+?
The current lead time for the MAX389CWG+ should be confirmed through the Request a Quote form on this page, where quantity and required delivery date can be included with the inquiry. The component is a standard 24-SOIC analog multiplexer from Analog Devices, but assembly, test, and distribution schedules can affect availability. Provide your scheduled production dates to obtain a sourcing response tied to your build plan.
Is the MAX389CWG+ currently in stock?
Stock status for the MAX389CWG+ changes with inventory and replenishment activity, so the Request a Quote form on this page is the appropriate way to request a current answer. Include the required quantity and target delivery date in the request. The part is manufactured as a 24-SOIC, dual 4:1 analog multiplexer with fault-protected switching, making it suitable for prototype and production sourcing.
What are the key specifications of the MAX389CWG+ that engineers should know?
The key MAX389CWG+ specifications are two 4:1 switching circuits, 3 kOhm on-resistance, a 24-pin SOIC package, and high-voltage, fault-protected analog multiplexing. These parameters determine source-impedance error, routing flexibility, routing density, and mechanical compatibility. Verify detailed voltage, temperature, leakage, crosstalk, and timing limits in the manufacturer datasheet for the final operating environment.

Impormasyon ng Talumpati sa Engineering for MAX389CWG+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MAX389CWG+ when a 24-SOIC board requires two independent 4:1 analog selectors with fault-protected, high-voltage-oriented switching and a 3 kOhm on-resistance. MAX389CWG is the closest web-confirmed alternative when the '+' lead-free ordering designation is not required. MAX389CSE+, MAX389CWE+, and MAX389EEE+ are same-family ordering candidates, but their temperature suffixes must be checked against the intended environment before substitution. MAX389CWG-T is electrically and mechanically equivalent but supplied in a tape-and-reel commercial format. None of these choices should be treated as interchangeable with a generic 4:1 mux until the pinout, select truth table, protection behavior, leakage, switching time, and absolute maximum ratings are compared. A generic mux may offer lower on-resistance or a smaller package, but it may not provide the same integrated protection or pin arrangement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MAX389CWG MAX389CSE+ MAX389CWE+ MAX389EEE+ MAX389CWG-T
Package 24-SOIC 24-SOIC 24-SOIC 24-SOIC 24-SOIC 24-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Multiplexer Configuration 4:1 4:1 4:1 4:1 4:1 4:1
Product Function High-voltage, fault-protected analog multiplexer Fault-protected analog switch MAX389 family analog multiplexer MAX389 family analog multiplexer MAX389 family analog multiplexer Fault-protected analog switch
Supported Signal Type Analog Analog Analog Analog Analog Analog
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount

Pangunahing mga Pagkakaiba

  • Dual 4:1 routing in one analog switch (kumpara saMAX389CWG)
  • Integrated fault-protected high-voltage switching (kumpara saMAX389CSE+)
  • Established 24-pin surface-mount footprint (kumpara saMAX389CWE+)

Talaan ng Disenyo

Keep the selected analog path short and place connector-side protection close to the input pins. The 3 kOhm on-resistance can become a significant divider when combined with a high-impedance sensor. Use a continuous ground reference under the analog section, route digital select signals away from input traces, and place analog and digital return currents so their magnetic coupling is minimized.

Allow sufficient acquisition settling time after changing a mux selection because the 3 kOhm on-resistance, source capacitance, and PCB capacitance form an RC network. For high-impedance sources, add a local low-capacitance buffer. The MAX389 family's fault protection helps with overvoltage incidents, but it does not eliminate the need to establish a defined input range, clamp external transients, and verify the selected channel's operating limits.

Do not assume that two 4:1 sections share identical select logic without checking the manufacturer truth table and pin-description table. Verify the MAX389CWG+ versus MAX389CWG ordering codes, temperature grade, and '+' designation before releasing production artwork. Also verify whether the unused common or select pins must be tied to a defined level rather than left floating.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The '+' ordering suffix commonly denotes a lead-free-compliant option, but the retrieved listings do not explicitly state the compliance declarations. AEC-Q100 status is not stated for this interface IC.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MAX389CWG+ datasheet MAX389CWG+ specifications MAX389CWG+ pinout MAX389CWG+ equivalent MAX389CWG+ replacement MAX389CWG+ cross reference MAX389CWG+ 24-SOIC MAX389CWG+ price MAX389CWG+ stock Analog Devices MAX389CWG+ MAX389CWG+ vs MAX389CWG MAX389CWG+ 4:1 analog mux MAX389CWG+ fault protected mux MAX389CWG+ high voltage multiplexer

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices Maxim Integrated MAX389CWG+ MAX389CWG MAX389CSE+ MAX389CWE+ MAX389EEE+ MAX389CWG-T analog multiplexer analog switch multiplexer 4:1 mux fault-protected switching high-voltage analog switching on-resistance 3 kOhm 24-SOIC SOIC family surface-mount package test equipment data acquisition industrial sensor interface process control RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ