MAX389CWG+ - 4:1 Fault-Protected Analog MUX | Analog Devices
부품 번호: MAX389CWG+ ✓ 활성MAX389CWG+ 개요
An analog multiplexer is a switching interface that connects one of several inputs to a shared output. In the signal-chain hierarchy, the MAX389CWG+ belongs to the analog switch and multiplexer category, where fault protection and high-voltage tolerance help isolate external circuitry from downstream measurement channels. The 24-SOIC footprint provides a conventional surface-mount option for instrumentation, industrial control, and test equipment designs.
Key features include two switching circuits, a 4:1 configuration, and 3 kOhm on-resistance. The 4:1 arrangement allows four input paths to be selected for each of two circuits, while the fault-protected architecture is intended to improve system robustness when connected to external analog sources. Its surface-mount SOIC package supports automated assembly and compact PCB layouts, although the relatively long 24-pin footprint requires more board area than modern leadless packages.
MAX389 devices are used where analog signals must be routed before measurement, excitation, conversion, or control. Typical signal types include sensor outputs, external test points, and conditioned analog inputs. The integrated protection function is especially relevant when a selected channel connects to a source that may carry a higher voltage than the downstream circuitry expects. Board design must still include suitable grounding, decoupling, and protection around the selected pins.
Typical applications include automated test equipment, process-control interfaces, laboratory measurement systems, data acquisition modules, and industrial sensor-conditioning boards. The 24-pin SOIC package is appropriate where a proven through-hole-style lead arrangement and external prototyping access are more valuable than minimum board area.
When laying out the PCB, route each mux channel as a short, guarded analog trace and place input protection close to the connector. Confirm the absolute maximum ratings and switch-state behavior in the manufacturer datasheet before applying external voltages. This page consolidates package details, sourcing guidance, drop-in alternatives, and practical layout considerations for engineers evaluating the MAX389CWG+.
드롭인 대체품: MAX389CWG+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MAX389CWG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX389CSE+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX389CWE+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX389EEE+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX389CWG-T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX389CWG+ 사양
| Number of Circuits | 2 circuits |
| Multiplexer Configuration | 4:1 |
| On-Resistance | 3 kOhm |
| 핀 수 | 24 pins |
| 패키지 | 24-SOIC |
| 실장 유형 | Surface Mount |
| Product Type | High-voltage, fault-protected analog multiplexer |
| Switch Type | 4:1 analog multiplexer |
| Number of Channels | 2 switching circuits |
| Supported Signal Type | Analog |
| Fault Protection | Integrated fault-protected switching |
MAX389CWG+ 24-soic 핀 구성 가이드
MAX389CWG+(24-soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX389CWG+.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX389CWG+ 적합 용도: 6 애플리케이션s: Automated Test Equipment Signal Routing, Industrial Sensor Multiplexing, Data Acquisition and Lab Instrumentation, Process Control Interface Boards, Battery-Powered Measurement Modules, Mixed-Signal Peripheral and Communication Cards.
Automated Test Equipment Signal Routing
The MAX389CWG+ fits automated test systems that must connect several analog test points to shared measurement circuitry. Its two 4:1 switching circuits permit multiple source paths to be selected with a relatively compact control interface. The 3 kOhm on-resistance must be treated as part of the measurement-source impedance, so buffered sensor outputs or appropriately terminated inputs will improve accuracy. Fault-protected high-voltage switching is valuable when a fixture accidentally presents a higher-than-expected voltage to a selected channel.
추천
Industrial Sensor Multiplexing
The MAX389CWG+ can consolidate several analog sensor outputs before they reach a controller or converter. Two independent 4:1 sections are useful when a board must monitor multiple pressure, temperature, or position sensors without purchasing separate switch ICs. Designers should calculate the divider formed by sensor impedance and the 3 kOhm mux resistance, then account for leakage, settling time, and channel crosstalk. Placing the device near the sensor connectors also reduces susceptibility to electrically noisy board-trace pickup.
추천
Data Acquisition and Lab Instrumentation
The MAX389CWG+ is appropriate for laboratory and bench instrumentation that selects among external inputs, calibration sources, or reference voltages. The dual 4:1 arrangement allows the instrument to switch two groups of sources while keeping the board population low. Its 3 kOhm on-resistance may require a high-impedance buffer for very accurate attenuation measurements, and the selected source should be allowed to settle before conversion. Use a grounded guard structure around sensitive analog traces to maximize off-channel rejection.
추천
Process Control Interface Boards
The MAX389CWG+ supports industrial control boards that must choose among pressure, flow, level, or valve-feedback signals. The two switching circuits can reduce the number of dedicated analog routing components, while the fault-protected construction improves robustness at interfaces exposed to field wiring. Keep protection elements near the field connector and separate switching-current paths from precision sensor returns. Verify the control-loop bandwidth against the mux's settling behavior and include a hold interval before sampling the selected channel.
추천
Battery-Powered Measurement Modules
The MAX389CWG+ can reduce the number of analog switches required in a compact multi-channel measurement module. Its two 4:1 sections let one ADC input path serve several analog sources, reducing board area and routing complexity in a portable enclosure. Low-power designs should account for both the mux quiescent current and the power consumed by external buffers. Long PCB traces and high source impedance can also increase settling error, so use local buffering when the sensor output impedance is high.
추천
Mixed-Signal Peripheral and Communication Cards
The MAX389CWG+ is useful on legacy-style mixed-signal peripheral boards that combine several external analog interfaces with digital control. Two 4:1 selectors can route incoming or outgoing analog lines without duplicating wide-area routing. The 24-SOIC package offers accessible pins for prototype probing and straightforward automated assembly. Because the mux and surrounding circuitry may sit near a digital interface, use a single ground reference, avoid routing switch-control signals beneath analog inputs, and test both active and inactive channels for crosstalk.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX389CWG+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX389CWG | MAX389CSE+ | MAX389CWE+ | MAX389EEE+ | MAX389CWG-T |
|---|---|---|---|---|---|---|
| Package | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Multiplexer Configuration | 4:1 | 4:1 | 4:1 | 4:1 | 4:1 | 4:1 |
| Product Function | High-voltage, fault-protected analog multiplexer | Fault-protected analog switch | MAX389 family analog multiplexer | MAX389 family analog multiplexer | MAX389 family analog multiplexer | Fault-protected analog switch |
| Supported Signal Type | Analog | Analog | Analog | Analog | Analog | Analog |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
주요 차별점
- Dual 4:1 routing in one analog switch (vs MAX389CWG)
- Integrated fault-protected high-voltage switching (vs MAX389CSE+)
- Established 24-pin surface-mount footprint (vs MAX389CWE+)
설계 노트
Keep the selected analog path short and place connector-side protection close to the input pins. The 3 kOhm on-resistance can become a significant divider when combined with a high-impedance sensor. Use a continuous ground reference under the analog section, route digital select signals away from input traces, and place analog and digital return currents so their magnetic coupling is minimized.
Allow sufficient acquisition settling time after changing a mux selection because the 3 kOhm on-resistance, source capacitance, and PCB capacitance form an RC network. For high-impedance sources, add a local low-capacitance buffer. The MAX389 family's fault protection helps with overvoltage incidents, but it does not eliminate the need to establish a defined input range, clamp external transients, and verify the selected channel's operating limits.
Do not assume that two 4:1 sections share identical select logic without checking the manufacturer truth table and pin-description table. Verify the MAX389CWG+ versus MAX389CWG ordering codes, temperature grade, and '+' designation before releasing production artwork. Also verify whether the unused common or select pins must be tied to a defined level rather than left floating.
규정 준수 정보
The '+' ordering suffix commonly denotes a lead-free-compliant option, but the retrieved listings do not explicitly state the compliance declarations. AEC-Q100 status is not stated for this interface IC.