MAX398EGE - 8:1 Low-Voltage CMOS Analog Multiplexer | Analog Devices
MPN: MAX398EGE ✓ NakahandaMAX398EGE Ulas
An analog multiplexer is an analog switch array that connects a common terminal to one selected input channel. Within the interface-IC hierarchy, the MAX398EGE belongs to the analog switch and multiplexer family, where low and closely matched on-resistance reduce channel-dependent attenuation and error. Its monolithic CMOS construction is intended for low-voltage analog routing where repeatable channel behavior and compact implementation are important.
The primary performance specifications emphasize resistance matching rather than resistance alone. Less than 100 Ω on-resistance limits insertion loss in the selected path, while matching within 6 Ω minimizes gain differences as the selected input changes. The 11 Ω maximum change across the specified analog range further limits signal-level distortion when the mux handles varying amplitudes. The 8:1 configuration also reduces the number of external routing connections required in multichannel analog front ends.
The MAX398 part family is offered as an 8-channel or dual 4-channel precision multiplexer. This distinction matters because an 8:1 device presents eight selection inputs, while the dual 4:1 arrangement divides its resources into two independent 4:1 muxes. Circuit designers must therefore confirm pin-level functions, control logic, and package suffix before treating family members as substitutes. The MAX398EGE is the 8:1 member in the exact ordered variant identified here.
Typical uses include multichannel sensor acquisition, automated test equipment, battery-cell measurement, industrial control systems, and laboratory instrumentation. In these systems, the common analog path can be connected successively to different sensors or test nodes while the surrounding ADC or measurement front end processes the selected signal. The low matched on-resistance helps preserve amplitude consistency across channels.
PCB design should account for the QFN package, exposed thermal pad requirements, supply bypassing, and analog return-current paths. Keep the multiplexed signal traces short, use a continuous ground reference, and place input and bypass capacitors close to their associated pins. Review the MAX398EGE datasheet pin description table before assigning control and signal functions because the 16-pin layout includes multiple selection and common connections.
This product record combines the manufacturer overview with package and circuit-level guidance, identifies verified drop-in alternatives where they exist, and adds practical selection criteria for analog routing. It distinguishes confirmed electrical characteristics from parameters that still require confirmation for a production design, helping engineers evaluate the MAX398EGE before layout release.
Mga alternatibo na pwedeng ilagay na MAX398EGE — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboMAX398EGE Mga Spesipikasyon
| Multiplexer Configuration | 8:1 |
| Number of Channels | 8 channels |
| On-Resistance | Less than 100 ohm |
| On-Resistance Channel Matching | Within 6 ohm between channels |
| On-Resistance Variation Over Analog Signal Range | 11 ohm maximum |
| Device Type | Precision monolithic CMOS analog multiplexer |
| Supported Multiplexing Arrangement | 8-channel or dual 4-channel in the MAX398/MAX399 family |
| Packhaging | 16-pin QFN, 4 mm x 4 mm |
| Uri ng Pagpapasok | Surface mount |
| Circuit Count | 1 circuit |
| On-Resistance Flatness | Flat over the specified analog signal range |
| Manufacturer Product Status | Production |
Gabay sa Pin Configuration ng MAX398EGE 16-pin qfn, 4 mm x 4 mm
Pin configuration para sa MAX398EGE (16-pin qfn, 4 mm x 4 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX398EGE.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX398EGE ay nararapat para sa 6 aplikasyons: Multichannel Sensor Acquisition, Automated Test Equipment, Battery Cell Monitoring, Industrial Control Signal Routing, Laboratory Instrumentation, Data Acquisition Systems.
Multichannel Sensor Acquisition
The MAX398EGE fits multichannel sensor acquisition because it routes one of eight analog inputs to a common measurement path while maintaining less than 100 Ω on-resistance. Its channel matching within 6 Ω helps reduce gain variation when different sensors are selected in succession. An ADC front end can use the common output as its analog input while digital control lines select the measured channel. Designers should confirm that every sensor signal remains within the specified analog range and should account for source impedance, ADC input topology, and the mux's contribution to signal attenuation.
Inirekomenda
Automated Test Equipment
The MAX398EGE is appropriate for automated test equipment that must connect several test points to one measurement instrument channel. Its 8:1 configuration reduces external routing complexity, while the 11 Ω maximum on-resistance variation over the specified analog range helps maintain signal consistency as input amplitude changes. The common terminal can feed an ADC, comparator, or precision measurement front end. For accurate results, keep the analog path short, provide a low-impedance downstream input, and verify that switch resistance and channel matching fit the required measurement tolerance.
Inirekomenda
Battery Cell Monitoring
The MAX398EGE can route multiple battery-cell or balancing-monitor inputs into a shared analog measurement chain. Its low on-resistance reduces the voltage drop introduced between the selected cell node and the measurement input, while close channel matching improves consistency when different cells are scanned. The compact QFN implementation also supports space-constrained monitoring boards. The design must remain within the specified analog signal range, include appropriate protection and isolation, and provide a stable reference and ADC front end for accurate cell-voltage measurements.
Inirekomenda
Industrial Control Signal Routing
The MAX398EGE fits industrial control boards that must select among several analog command or sensor lines. The 8:1 topology consolidates analog routing while the less-than-100 Ω on-resistance helps limit loading of the selected source. Matching within 6 Ω supports repeatable channel behavior across a control loop. Engineers should verify common-mode limits, supply requirements, control timing, and system grounding, and should place the device near the analog source when trace length or source impedance could otherwise increase error.
Inirekomenda
Laboratory Instrumentation
The MAX398EGE is useful in laboratory instruments that switch several external or internal test signals onto a common precision input. Closely matched on-resistance helps prevent channel selection from producing substantial gain changes, and the 11 Ω maximum variation supports predictable behavior over the analog range. A compact 16-pin QFN also allows the multiplexer to sit near sensitive analog circuitry. For best results, use a low-noise reference, clean supply bypassing, short signal paths, and a downstream circuit whose input impedance does not create excessive divider error.
Inirekomenda
Data Acquisition Systems
The MAX398EGE supports compact data-acquisition systems requiring eight analog inputs but only one downstream conversion channel. Select lines can scan the inputs sequentially, while the common output feeds an ADC or analog front end. The specified low on-resistance and tight channel matching help minimize input-dependent attenuation and improve repeatability between scans. Designers should select a sampling scheme compatible with the mux's switching behavior, establish acquisition time for the ADC, and place the device to minimize coupling from digital select lines into the analog path.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX398EGE — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 16-pin QFN, 4 mm x 4 mm |
| Brand | Analog Devices |
| Multiplexer Configuration | 8:1 |
| Number of Circuits | 1 circuit |
| On-Resistance | Less than 100 ohm |
| On-Resistance Matching | Within 6 ohm between channels |
| On-Resistance Variation | 11 ohm maximum over specified analog signal range |
| Device Architecture | Precision monolithic CMOS analog multiplexer |
| Product Status | Production |
Pangunahing mga Pagkakaiba
- Eight-channel routing in one device (kumpara saMAX399)
- Close channel-to-channel resistance matching (kumpara saGeneric low-resistance analog multiplexer)
- Compact surface-mount footprint (kumpara saMAX398EPE)
- Smaller footprint than the SOIC variant (kumpara saMAX398ESE+)
Talaan ng Disenyo
Place the MAX398EGE close to the analog source or measurement front end and keep the common analog trace short. Route the eight input connections away from switching and clock signals to reduce capacitive coupling into the selected path. A continuous ground plane under and around the QFN is preferable to fragmented return paths, especially when the downstream circuit uses high-impedance inputs.
Include the switch on-resistance and downstream input impedance when calculating measurement attenuation. With a less-than-100 Ω on-resistance specification, a high-impedance receiver can experience meaningful division error. Confirm the analog signal range, use a high-input-impedance ADC front end, and evaluate settling time after changing the selected channel before taking successive samples.
Do not substitute MAX398EPE or MAX398ESE+ directly for MAX398EGE: the verified package variants are 16-pin DIP and 16-pin SOIC, respectively, while MAX398EGE uses a 16-pin QFN. Also do not treat the dual 4:1 MAX399 as a direct substitute. Confirm the exact ordering code, pin description table, control levels, supply limits, and exposed-pad assembly requirements.
Provide local supply bypassing and route it using the shortest practical path to the device's supply and ground pins. Decoupling requirements must be confirmed from the manufacturer data sheet because the exact voltage and capacitance values are not stated on the product overview. Maintain a low-impedance ground return and avoid sharing narrow return paths with high-current output circuitry.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer overview identifies MAX398 as a production part but does not state the requested compliance classifications.