MC9S08GW32CLK - 20MHz 8-Bit S08 MCU, 32KB Flash | NXP
MPN: MC9S08GW32CLK ✗ Tapus ng BuhayMC9S08GW32CLK Ulas
An 8-bit microcontroller is a compact embedded-control device that executes programmed instructions, reads sensors, controls outputs, and manages communication or timing tasks. The S08 is a reduced-instruction-computer architecture within the HCS08 family. The MC9S08GW family extends this embedded-control hierarchy into metering-oriented systems, combining general-purpose digital control with dedicated analog-to-digital conversion and pulse-measurement functions.
The principal device features include 32 KB of flash program memory, operation up to 20 MHz, and two independent 16-bit successive-approximation-register analog-to-digital converters. NXP identifies gas meters, water-flow meters, and single-phase electric meters as representative applications. A programmable delay block and a pulse counter with automatic sensor decoding support these designs, reducing the need for separate signal-conditioning and decoding circuitry where suitable.
The MC9S08GW32CLK integrates an S08 microcontroller core with metering-oriented analog and timing resources. Two independent 16-bit SAR ADCs allow different sensor channels to be converted with separate timing control, while the programmable delay block can establish defined measurement intervals. The pulse counter and automatic sensor decoding are particularly relevant to magnetic or electromechanical flow sensors whose output pulse rate or timing must be measured accurately. The 20 MHz operating ceiling provides additional timing headroom for firmware, interrupts, peripheral coordination, and communications routines.
Typical deployments include residential gas meters, water-consumption meters, and single-phase electricity meters. In these systems, the MCU can acquire analog sensor information, time pulse-based flow signals, apply calibration and compensation, maintain operating counters, and report results through a communications interface. Its 80-LQFP package offers more I/O and peripheral connectivity than small-outline packages, which can simplify designs requiring multiple sensors, displays, communication ports, or external interface signals.
Design planning should account for the device's lifecycle and complete pin-level requirements before starting a new production design. Because the manufacturer identifies the part as end-of-life, engineers should also consider whether an approved family successor can satisfy the original electrical, software, and mechanical requirements. The 80-pin package needs careful examination in the manufacturer datasheet before PCB routing, especially for power, ground, analog inputs, clock, programming, and communication functions.
This page combines device specifications, metering application guidance, lifecycle information, sourcing structure, and design-oriented engineering notes. It is intended to help engineers determine whether the MC9S08GW32CLK remains suitable for an existing embedded design and what must be verified before committing to a replacement or redesign.
Mga alternatibo na pwedeng ilagay na MC9S08GW32CLK — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MC9S08GW32CLK (parehas na form factor at footprint) — pagkakaiba sa ADC Resolution, Package.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboMC9S08GW32CLK Mga Pinakamataas na Rating at Electrical Characteristics
| Microcontroller Family | S08 / HCS08 family |
| CPU Architecture | 8-bit enhanced HCS08 core |
| Maksimum na Taktiko ng Oras | 20 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| Analog-to-Digital Converter Count | 2 converters |
| ADC Resolution | 16 bits per converter |
| ADC Architecture | SAR successive-approximation-register |
| Pulse Counter | 1 counter with automatic sensor decoding |
| Programmable Delay Block | 1 block |
| Packhaging | 80-pin LQFP |
| Package Body Size | 14 mm x 14 mm |
| Uri ng Pagpapasok | Surface mount |
| Programming Memory Type | Flash |
Gabay sa Pin Configuration ng MC9S08GW32CLK 14 mm x 14 mm
Pin configuration para sa MC9S08GW32CLK (14 mm x 14 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MC9S08GW32CLK.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MC9S08GW32CLK ay nararapat para sa 6 aplikasyons: Gas Metering, Water-Flow Metering, Single-Phase Electric Metering, Pulse-Based Sensor Interface, Embedded Data Acquisition, Utility Meter Controller.
Gas Metering
The MC9S08GW32CLK fits gas-metering designs because its two independent 16-bit SAR ADCs can acquire separate analog sensor signals while the programmable delay block establishes repeatable timing for measurements. The 20 MHz S08 core also provides processing capacity for compensation, status tracking, and communication routines within a 32 KB flash budget. A pulse counter with automatic sensor decoding can handle compatible flow or valve-position signals without requiring every pulse train to be serviced only in general-purpose software. In a practical meter, the MCU can combine acquisition, timing, and control functions while limiting the number of external devices. Final sensor accuracy and safety margins remain functions of the analog front end, calibration method, and applicable gas-meter certification requirements.
Inirekomenda
Water-Flow Metering
The MC9S08GW32CLK is appropriate for compact water-flow meters that combine analog sensing with pulse-based flow measurement. Its two independent 16-bit SAR ADC channels allow separate sensor conversions, while the programmable delay block can control measurement timing and the pulse counter can decode compatible sensor output. At up to 20 MHz, the 8-bit HCS08 core can perform volume accumulation, compensation, tamper checks, and data transfer within the device's 32 KB flash memory. Integrating these functions helps conserve board area compared with a design using separate timing and decoding components. The result still depends on correct front-end design, sensor characterization, and calibration; the MCU provides measurement control but does not eliminate analog error or mechanical-flow variation.
Inirekomenda
Single-Phase Electric Metering
The MC9S08GW32CLK supports single-phase electric-meter architectures that require controlled analog acquisition and precise signal timing in one embedded controller. Two independent 16-bit SAR ADCs can serve separate measurement channels, while the programmable delay block coordinates sampling intervals and the pulse counter with automatic sensor decoding supports compatible pulse-based input paths. The 20 MHz S08 core can manage calculation routines, energy accumulation, calibration coefficients, and communication tasks using 32 KB of flash. NXP specifically identifies single-phase electric meters as an MC9S08GW application. A production design must still validate signal conditioning, safety isolation, metering accuracy, and applicable regulatory requirements according to the target market and meter architecture.
Inirekomenda
Pulse-Based Sensor Interface
The MC9S08GW32CLK is useful when an embedded product must measure repetitive sensor pulses while also performing analog conversions. Its dedicated pulse counter includes automatic sensor decoding, reducing the need to decode every supported pulse waveform entirely in general-purpose interrupt code. The programmable delay block can coordinate repeatable measurement windows, and the two 16-bit SAR ADCs can monitor related analog conditions such as sensor supply, temperature, or another measurement channel. With an enhanced HCS08 core operating up to 20 MHz and 32 KB of flash, the device can combine acquisition with filtering, compensation, and data handling. The external sensor output must remain within the device's specified electrical limits, and pulse conditioning should preserve signal integrity at the input.
Inirekomenda
Embedded Data Acquisition
The MC9S08GW32CLK can serve as the central controller in a compact data-acquisition system requiring two independent analog channels and deterministic measurement timing. Two 16-bit SAR ADCs provide separate conversion channels, while the programmable delay block establishes repeatable acquisition periods. The 20 MHz enhanced HCS08 core can process captured values, implement scaling and filtering, maintain counters, and expose results through the device's available peripherals. Its 32 KB flash capacity makes it most suitable for focused embedded acquisition rather than large data logging. The 80-pin LQFP also offers a broad pin count for sensors, control signals, communications, programming, and support circuitry. Exact ADC timing, input limits, and peripheral assignments must be implemented according to the manufacturer datasheet.
Inirekomenda
Utility Meter Controller
The MC9S08GW32CLK is suitable for utility-meter control platforms that combine sensor measurement, timing, local processing, and status reporting. Its two independent 16-bit SAR ADCs support multiple analog inputs, while the pulse counter and automatic sensor decoding accommodate compatible pulse-based measurement channels. The 20 MHz S08 core and 32 KB flash provide sufficient resources for calibration, accumulation, fault detection, and controlled data transfer in a compact design. Because the package is an 80-pin LQFP, the controller can support more external interfaces than a small-outline MCU while retaining a broad leaded-footprint assembly process. Engineers should confirm pin multiplexing, communications requirements, and power architecture in the datasheet. For new deployments, the device's end-of-life status makes lifecycle risk a central selection criterion.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MC9S08GW32CLK — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Brand | NXP Semiconductors |
| Package | 80-LQFP (14 mm x 14 mm) |
| CPU Architecture | 8-bit enhanced HCS08 core |
| Maximum Clock Frequency | 20 MHz |
| Flash Memory | 32 KB |
| ADC Configuration | 2 independent 16-bit SAR ADCs |
| Pulse Counter | Pulse counter with automatic sensor decoding |
| Primary Applications | Gas meters, water-flow meters, and single-phase electric meters |
| Lifecycle Status | End of life |
Talaan ng Disenyo
Do not treat an 80-LQFP footprint match as proof of replacement compatibility. A substitute must match every pin assigned in the manufacturer pin-description table, including power, ground, analog inputs, clock, reset, programming, and communication functions. It must also preserve the 20 MHz timing assumptions, two 16-bit SAR ADC resources, programmable delay block, pulse counter, and 32 KB flash layout used by the firmware. Validate the complete pin map and peripheral migration before changing the bill of materials.
Route the two ADC inputs as compact, quiet analog nets and keep them away from switching nodes and high-current return paths. Place associated input and bypass capacitors at the pins specified by the reference circuit in the manufacturer documentation. Provide short ground returns for sensitive measurements and maintain a continuous ground plane where practical. Because the device offers two independent ADCs, verify that each sensor channel receives the intended filtering, reference, and grounding arrangement rather than assuming the channels are interchangeable in every operating condition.
Plan the power tree around the device's required operating range and external analog-sensor demands. Separate sensitive analog supplies from noisy actuator or communication rails where the board architecture permits, and use local bypass paths that minimize loop area. The operating-voltage limits, internal regulator arrangement, and external component recommendations must be taken from the manufacturer datasheet. Do not derive supply values from the 20 MHz clock rating or from the fact that the product is described as a low-cost MCU.
Treat pulse-counter inputs and analog measurement channels as separate signal paths. Confirm input thresholds, maximum frequency, filtering requirements, and any grounding or shielding guidance in the datasheet. Use the programmable delay block and automatic sensor decoding for compatible pulse signals, but preserve signal amplitude and edge quality through the external front end. Firmware should also reject implausible periods or counts so a noisy or disconnected sensor cannot corrupt accumulated metering data.
Account for the product's end-of-life status before starting a new production design. A last-time-buy decision should account for assembly schedules, firmware support, component traceability, and whether the board can accept an active successor with different pin, clock, memory, or peripheral behavior. For maintenance of an existing product, obtain a current quotation and verify package form, date codes, and remaining inventory through the Request a Quote process on this page.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer identifies the device as end-of-life. The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this product is not presented as an automotive-qualified device.