AVISO DE ÚLTIMA COMPRA: MC9S08GW32CLK está próximo al fin de vida. Fecha límite de pedido: Contáctenos. Ver piezas alternativas disponibles →
NXP Semiconductors

MC9S08GW32CLK - 20MHz 8-Bit S08 MCU, 32KB Flash | NXP

N.º de pieza: MC9S08GW32CLK ✗ Fin de vida
80-pin LQFP Package 20 MHz Speed 32 KB Memory
MOQ: 1 |

MC9S08GW32CLK Descripción general

NXP MC9S08GW32CLK is an 8-bit S08-family microcontroller with a 20 MHz maximum clock, 32 KB of flash memory, and an 80-pin LQFP package measuring 14 mm by 14 mm. It belongs to the MC9S08GW series designed around the enhanced HCS08 core for metering and measurement systems in which compact control, analog conversion, and pulse acquisition must coexist in one device.

An 8-bit microcontroller is a compact embedded-control device that executes programmed instructions, reads sensors, controls outputs, and manages communication or timing tasks. The S08 is a reduced-instruction-computer architecture within the HCS08 family. The MC9S08GW family extends this embedded-control hierarchy into metering-oriented systems, combining general-purpose digital control with dedicated analog-to-digital conversion and pulse-measurement functions.

The principal device features include 32 KB of flash program memory, operation up to 20 MHz, and two independent 16-bit successive-approximation-register analog-to-digital converters. NXP identifies gas meters, water-flow meters, and single-phase electric meters as representative applications. A programmable delay block and a pulse counter with automatic sensor decoding support these designs, reducing the need for separate signal-conditioning and decoding circuitry where suitable.

The MC9S08GW32CLK integrates an S08 microcontroller core with metering-oriented analog and timing resources. Two independent 16-bit SAR ADCs allow different sensor channels to be converted with separate timing control, while the programmable delay block can establish defined measurement intervals. The pulse counter and automatic sensor decoding are particularly relevant to magnetic or electromechanical flow sensors whose output pulse rate or timing must be measured accurately. The 20 MHz operating ceiling provides additional timing headroom for firmware, interrupts, peripheral coordination, and communications routines.

Typical deployments include residential gas meters, water-consumption meters, and single-phase electricity meters. In these systems, the MCU can acquire analog sensor information, time pulse-based flow signals, apply calibration and compensation, maintain operating counters, and report results through a communications interface. Its 80-LQFP package offers more I/O and peripheral connectivity than small-outline packages, which can simplify designs requiring multiple sensors, displays, communication ports, or external interface signals.

Design planning should account for the device's lifecycle and complete pin-level requirements before starting a new production design. Because the manufacturer identifies the part as end-of-life, engineers should also consider whether an approved family successor can satisfy the original electrical, software, and mechanical requirements. The 80-pin package needs careful examination in the manufacturer datasheet before PCB routing, especially for power, ground, analog inputs, clock, programming, and communication functions.

This page combines device specifications, metering application guidance, lifecycle information, sourcing structure, and design-oriented engineering notes. It is intended to help engineers determine whether the MC9S08GW32CLK remains suitable for an existing embedded design and what must be verified before committing to a replacement or redesign.

Alternativas directas para MC9S08GW32CLK — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MC9S08GW32CLK (mismo factor de forma y huella) — difiere en ADC Resolution, Package.

NXP Semiconductors
ADC Resolution: 16-bit
Package: 80-LQFP (14 x 14 mm)
Comparar con MC9S08GW32CLK →

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

MC9S08GW32CLK Valores máximos y características eléctricas

Microcontroller Family S08 / HCS08 family
CPU Architecture 8-bit enhanced HCS08 core
Frecuencia de reloj máxima 20 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
Analog-to-Digital Converter Count 2 converters
ADC Resolution 16 bits per converter
ADC Architecture SAR successive-approximation-register
Pulse Counter 1 counter with automatic sensor decoding
Programmable Delay Block 1 block
Encapsulado 80-pin LQFP
Package Body Size 14 mm x 14 mm
Tipo de montaje Surface mount
Programming Memory Type Flash

Guía de configuración de pines de MC9S08GW32CLK 14 mm x 14 mm

Configuración de pines para MC9S08GW32CLK (encapsulado 14 mm x 14 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 14 mm x 14 mm para MC9S08GW32CLK

No hay datos detallados de patillaje disponibles para MC9S08GW32CLK.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MC9S08GW32CLK es adecuado para 6 aplicacións: Gas Metering, Water-Flow Metering, Single-Phase Electric Metering, Pulse-Based Sensor Interface, Embedded Data Acquisition, Utility Meter Controller.

⚡

Gas Metering

The MC9S08GW32CLK fits gas-metering designs because its two independent 16-bit SAR ADCs can acquire separate analog sensor signals while the programmable delay block establishes repeatable timing for measurements. The 20 MHz S08 core also provides processing capacity for compensation, status tracking, and communication routines within a 32 KB flash budget. A pulse counter with automatic sensor decoding can handle compatible flow or valve-position signals without requiring every pulse train to be serviced only in general-purpose software. In a practical meter, the MCU can combine acquisition, timing, and control functions while limiting the number of external devices. Final sensor accuracy and safety margins remain functions of the analog front end, calibration method, and applicable gas-meter certification requirements.

⚡

Water-Flow Metering

The MC9S08GW32CLK is appropriate for compact water-flow meters that combine analog sensing with pulse-based flow measurement. Its two independent 16-bit SAR ADC channels allow separate sensor conversions, while the programmable delay block can control measurement timing and the pulse counter can decode compatible sensor output. At up to 20 MHz, the 8-bit HCS08 core can perform volume accumulation, compensation, tamper checks, and data transfer within the device's 32 KB flash memory. Integrating these functions helps conserve board area compared with a design using separate timing and decoding components. The result still depends on correct front-end design, sensor characterization, and calibration; the MCU provides measurement control but does not eliminate analog error or mechanical-flow variation.

⚡

Single-Phase Electric Metering

The MC9S08GW32CLK supports single-phase electric-meter architectures that require controlled analog acquisition and precise signal timing in one embedded controller. Two independent 16-bit SAR ADCs can serve separate measurement channels, while the programmable delay block coordinates sampling intervals and the pulse counter with automatic sensor decoding supports compatible pulse-based input paths. The 20 MHz S08 core can manage calculation routines, energy accumulation, calibration coefficients, and communication tasks using 32 KB of flash. NXP specifically identifies single-phase electric meters as an MC9S08GW application. A production design must still validate signal conditioning, safety isolation, metering accuracy, and applicable regulatory requirements according to the target market and meter architecture.

🧩

Pulse-Based Sensor Interface

The MC9S08GW32CLK is useful when an embedded product must measure repetitive sensor pulses while also performing analog conversions. Its dedicated pulse counter includes automatic sensor decoding, reducing the need to decode every supported pulse waveform entirely in general-purpose interrupt code. The programmable delay block can coordinate repeatable measurement windows, and the two 16-bit SAR ADCs can monitor related analog conditions such as sensor supply, temperature, or another measurement channel. With an enhanced HCS08 core operating up to 20 MHz and 32 KB of flash, the device can combine acquisition with filtering, compensation, and data handling. The external sensor output must remain within the device's specified electrical limits, and pulse conditioning should preserve signal integrity at the input.

🏭

Embedded Data Acquisition

The MC9S08GW32CLK can serve as the central controller in a compact data-acquisition system requiring two independent analog channels and deterministic measurement timing. Two 16-bit SAR ADCs provide separate conversion channels, while the programmable delay block establishes repeatable acquisition periods. The 20 MHz enhanced HCS08 core can process captured values, implement scaling and filtering, maintain counters, and expose results through the device's available peripherals. Its 32 KB flash capacity makes it most suitable for focused embedded acquisition rather than large data logging. The 80-pin LQFP also offers a broad pin count for sensors, control signals, communications, programming, and support circuitry. Exact ADC timing, input limits, and peripheral assignments must be implemented according to the manufacturer datasheet.

🏭

Utility Meter Controller

The MC9S08GW32CLK is suitable for utility-meter control platforms that combine sensor measurement, timing, local processing, and status reporting. Its two independent 16-bit SAR ADCs support multiple analog inputs, while the pulse counter and automatic sensor decoding accommodate compatible pulse-based measurement channels. The 20 MHz S08 core and 32 KB flash provide sufficient resources for calibration, accumulation, fault detection, and controlled data transfer in a compact design. Because the package is an 80-pin LQFP, the controller can support more external interfaces than a small-outline MCU while retaining a broad leaded-footprint assembly process. Engineers should confirm pin multiplexing, communications requirements, and power architecture in the datasheet. For new deployments, the device's end-of-life status makes lifecycle risk a central selection criterion.

Resumen de productos recomendados

MC9S08GW32CLK NXP Semiconductors Se usa en: Gas Metering, Water-Flow Metering, Single-Phase Electric Metering, Pulse-Based Sensor Interface, Embedded Data Acquisition, Utility Meter Controller MC9S08GW32CLKR same device in reel packaging Se usa en: Gas Metering, Water-Flow Metering, Single-Phase Electric Metering, Pulse-Based Sensor Interface, Embedded Data Acquisition, Utility Meter Controller
What is the MC9S08GW32CLK?
The MC9S08GW32CLK is an 8-bit NXP S08-family microcontroller rated for operation up to 20 MHz and containing 32 KB of flash memory in an 80-pin LQFP package. According to the NXP manufacturer product information, the MC9S08GW family uses the enhanced HCS08 core and targets gas meters, water-flow meters, and single-phase electric meters. Its two independent 16-bit SAR ADCs and pulse counter make it particularly suitable for embedded measurement and metering products.
What are the key specifications of MC9S08GW32CLK that engineers should know?
The key MC9S08GW32CLK specifications are an enhanced HCS08 8-bit core, a 20 MHz maximum clock, 32 KB of flash memory, two independent 16-bit SAR ADCs, a programmable delay block, and a pulse counter with automatic sensor decoding. The device is packaged in an 80-pin LQFP measuring 14 mm by 14 mm. NXP positions the MC9S08GW family for gas, water-flow, and single-phase electric metering, according to the manufacturer product information.
Where can I download the MC9S08GW32CLK datasheet PDF?
The MC9S08GW32CLK datasheet and product information are available through the official NXP part page at https://www.nxp.com/part/MC9S08GW32CLK. That page contains the manufacturer data sheet and lifecycle information, including the end-of-life designation. Engineers should use the pin-description table, electrical characteristics, memory map, and package drawings in the manufacturer documentation before assigning PCB tracks or modifying an existing design.
Where can I find the MC9S08GW32CLK pinout?
The authoritative MC9S08GW32CLK pinout is the 80-pin diagram and pin-description table in the NXP manufacturer datasheet. The package is an 80-pin LQFP with a 14 mm by 14 mm body, but individual signal names, power pins, grounds, and programming functions are not reproduced here. Use the datasheet pin table to validate every land pattern, especially analog inputs, clock connections, reset behavior, and programming signals.
Is MC9S08GW32CLK suitable for gas and water-flow meters?
Yes, the MC9S08GW32CLK is specifically suited to gas and water-flow metering because it combines two independent 16-bit SAR ADCs, a programmable delay block, and a pulse counter with automatic sensor decoding. NXP identifies these meter categories as applications for the MC9S08GW family. This integration can support analog sensor acquisition and pulse-based flow measurement within one 8-bit control platform, although module accuracy still depends on front-end design and calibration.
What is the difference between MC9S08GW32CLK and MC9S08AC32CPUE?
The MC9S08GW32CLK uses an 80-pin LQFP package and includes the MC9S08GW metering-oriented feature set, including two independent 16-bit SAR ADCs. The MC9S08AC32CPUE is listed in comparison information with a 64-pin LQFP package. Because the pin counts and packages differ, MC9S08AC32CPUE is not a pin-to-pin drop-in replacement and should be treated as a redesign candidate rather than a direct substitute.
When should I choose MC9S08GW32CLK over a redesigned sensing MCU?
Choose the MC9S08GW32CLK when maintaining an existing 80-pin LQFP meter design is more valuable than adopting a new MCU architecture. Its 20 MHz S08 core, 32 KB flash memory, two 16-bit SAR ADCs, programmable delay block, and automatic sensor-decoding pulse counter preserve compatibility with established firmware and board layouts. For a new platform, evaluate an active device instead because NXP identifies the MC9S08GW32CLK as end-of-life.
What can replace MC9S08GW32CLK?
No verified pin-to-pin drop-in replacement for the MC9S08GW32CLK was identified in the available manufacturer and cross-reference information. The MC9S08GW32CLKR is the same device offered in reel packaging, but changing the shipment form is not a functional replacement. Any proposed substitute must demonstrate an 80-LQFP-compatible pin map, compatible memory and analog interfaces, suitable timing, and verified firmware or peripheral compatibility before it can replace this MCU.
Is MC9S08GW32CLK the same as MC9S08GW32CLKR?
The MC9S08GW32CLKR is the reel-packaging form of the MC9S08GW32CLK and retains the same 8-bit S08 architecture, 20 MHz clock, 32 KB flash configuration, and 80-LQFP package according to distributor product information. It can therefore be used as a manufacturing-format alternative when its ordering code and packaging arrangement are acceptable. It does not extend product life or change the end-of-life status of the underlying device.
What is the best NXP equivalent for MC9S08GW32CLK?
The best replacement is not determined by package similarity alone because the MC9S08GW32CLK is an end-of-life metering MCU with specialized analog and pulse-measurement resources. NXP's product page is the appropriate starting point for checking an official successor or recommended replacement. A candidate should be accepted only after comparing the 80-pin assignment, 20 MHz timing, 32 KB flash requirement, two 16-bit SAR ADC channels, delay block, pulse counter, voltage limits, and firmware behavior.
Where can I buy MC9S08GW32CLK online?
Use the Request a Quote form on this page to ask about MC9S08GW32CLK availability, current lead time, and minimum order quantity. NXP identifies the part as end-of-life, so inventory and delivery conditions can change. The form is the appropriate channel for a current sourcing response because it connects the request directly with XAIPART rather than relying on an outdated listing status.
What is the price of MC9S08GW32CLK?
Current MC9S08GW32CLK pricing should be requested through the Request a Quote form on this page. The part is identified by NXP as end-of-life, and a single unit-price reference does not establish current availability, volume pricing, or delivery terms. Include the required quantity, package shipment preference, target date, and whether an NXP-approved successor is acceptable in the quotation request.
What is the lead time and stock status for MC9S08GW32CLK?
Request current MC9S08GW32CLK stock status and lead time through the Request a Quote form on this page. Because NXP marks the device as end-of-life, the response should confirm both remaining factory supply and any channel inventory instead of assuming continued production. State the required quantity and any acceptable date range so the quotation can distinguish immediate shipment material from scheduled supply.
Is MC9S08GW32CLK in stock?
MC9S08GW32CLK stock status must be confirmed through the Request a Quote form on this page because the manufacturer identifies the device as end-of-life. Existing inventory may exist in some quantities, but that does not guarantee replenishment or a stable production schedule. Provide your required quantity, reel or tray preference, and target delivery date when requesting a current availability response.
Does MC9S08GW32CLK support automotive or RoHS-qualified designs?
The MC9S08GW32CLK should not be assumed to satisfy automotive or material-compliance requirements without checking the manufacturer documentation. Its published identity confirms an end-of-life 8-bit S08 metering MCU, but the available product information does not state AEC-Q100 qualification, RoHS status, REACH status, lead-free status, or halogen-free status. Use the current NXP product page and applicable manufacturer declarations for compliance decisions.

Datos de referencia de ingeniería para MC9S08GW32CLK — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MC9S08GW32CLK primarily when maintaining an existing S08-based metering design or reproducing its established architecture is important. The device combines a 20 MHz enhanced HCS08 core, 32 KB of flash, two independent 16-bit SAR ADCs, a programmable delay block, and an automatic sensor-decoding pulse counter in an 80-pin LQFP. These resources make it directly relevant to gas meters, water-flow meters, single-phase electric meters, and compact acquisition systems. However, NXP identifies the part as end-of-life, so it is generally better suited to ongoing maintenance than to a new product platform. If an approved active successor exists, compare its complete pin map, clock architecture, flash organization, ADC behavior, timing, and firmware requirements before switching. The MC9S08GW32CLKR is only a reel-packaging form of the same device, not a lifecycle solution or new functional alternative.

Comparación con alternativas

Parámetro Este producto
Brand NXP Semiconductors
Package 80-LQFP (14 mm x 14 mm)
CPU Architecture 8-bit enhanced HCS08 core
Maximum Clock Frequency 20 MHz
Flash Memory 32 KB
ADC Configuration 2 independent 16-bit SAR ADCs
Pulse Counter Pulse counter with automatic sensor decoding
Primary Applications Gas meters, water-flow meters, and single-phase electric meters
Lifecycle Status End of life

Notas de diseño

Do not treat an 80-LQFP footprint match as proof of replacement compatibility. A substitute must match every pin assigned in the manufacturer pin-description table, including power, ground, analog inputs, clock, reset, programming, and communication functions. It must also preserve the 20 MHz timing assumptions, two 16-bit SAR ADC resources, programmable delay block, pulse counter, and 32 KB flash layout used by the firmware. Validate the complete pin map and peripheral migration before changing the bill of materials.

Route the two ADC inputs as compact, quiet analog nets and keep them away from switching nodes and high-current return paths. Place associated input and bypass capacitors at the pins specified by the reference circuit in the manufacturer documentation. Provide short ground returns for sensitive measurements and maintain a continuous ground plane where practical. Because the device offers two independent ADCs, verify that each sensor channel receives the intended filtering, reference, and grounding arrangement rather than assuming the channels are interchangeable in every operating condition.

Plan the power tree around the device's required operating range and external analog-sensor demands. Separate sensitive analog supplies from noisy actuator or communication rails where the board architecture permits, and use local bypass paths that minimize loop area. The operating-voltage limits, internal regulator arrangement, and external component recommendations must be taken from the manufacturer datasheet. Do not derive supply values from the 20 MHz clock rating or from the fact that the product is described as a low-cost MCU.

Treat pulse-counter inputs and analog measurement channels as separate signal paths. Confirm input thresholds, maximum frequency, filtering requirements, and any grounding or shielding guidance in the datasheet. Use the programmable delay block and automatic sensor decoding for compatible pulse signals, but preserve signal amplitude and edge quality through the external front end. Firmware should also reject implausible periods or counts so a noisy or disconnected sensor cannot corrupt accumulated metering data.

Account for the product's end-of-life status before starting a new production design. A last-time-buy decision should account for assembly schedules, firmware support, component traceability, and whether the board can accept an active successor with different pin, clock, memory, or peripheral behavior. For maintenance of an existing product, obtain a current quotation and verify package form, date codes, and remaining inventory through the Request a Quote process on this page.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer identifies the device as end-of-life. The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this product is not presented as an automotive-qualified device.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MC9S08GW32CLK datasheet MC9S08GW32CLK pinout MC9S08GW32CLK datasheet pdf MC9S08GW32CLK equivalent MC9S08GW32CLK replacement MC9S08GW32CLK cross reference MC9S08GW32CLK price MC9S08GW32CLK stock NXP MC9S08GW32CLK MC9S08GW32CLK 20MHz 32KB MC9S08GW32CLK 80-LQFP MC9S08GW32CLK gas meter MC9S08GW32CLK water flow meter MC9S08GW32CLK electric meter MC9S08GW32CLK schematic

Componentes & términos relacionados

NXP Semiconductors MC9S08GW32CLK MC9S08GW32CLKR MC9S08GW S08 HCS08 8-bit microcontroller embedded controller microcontroller unit HCS08 family 32 KB flash memory 20 MHz clock 16-bit SAR ADC programmable delay block pulse counter automatic sensor decoding gas meter water-flow meter single-phase electric meter 80-LQFP LQFP package surface-mount package analog-to-digital converter embedded measurement end-of-life component
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ