Microchip Technology

MCP3550-50E/MS - 22-Bit 12.5 SPS ADC | Microchip

MPN: MCP3550-50E/MS ✓ Nakahanda
4.5 V Vdss 8-pin MSOP Package
MOQ: 1 |

MCP3550-50E/MS Ulas

The Microchip MCP3550-50E/MS is a low-power, single-channel 22-bit delta-sigma analog-to-digital converter operating at 12.5 samples per second in an 8-pin MSOP package. It accepts fully differential analog inputs and provides a 4.5 V supply rating, making it suitable for precision sensor acquisition, industrial instrumentation, and process-control systems.

A delta-sigma ADC is a voltage-to-digital converter that uses oversampling, noise shaping, and digital filtering to obtain high resolution from relatively slow, low-frequency measurements. Within the converter hierarchy, the MCP3550-50E/MS belongs to the sigma-delta ADC family and is optimized for sensor signals where low noise and compact analog circuitry are more important than high conversion speed.

The 22-bit resolution provides substantially more code density than conventional lower-resolution SAR ADCs. Its single-channel architecture simplifies analog routing, while the fully differential input structure supports direct connection to bridge sensors and other balanced sources. The manufacturer identifies the device as a low-power, single-channel converter intended for pressure, temperature, humidity, and similar sensor measurements.

The MCP3550-50E/MS uses an MSOP-8 surface-mount package and supports an operating temperature range of -40 °C to +125 °C. The manufacturer offers the device in MSOP and SOIC package options within the broader MCP3550/1/3 family. The MSOP configuration is useful where PCB area is constrained but a conventional through-hole-compatible industrial design is not required.

At 12.5 samples per second, the converter is suited to slowly changing measurements such as resistive bridges, thermocouple interfaces, industrial pressure transducers, and environmental sensors. Its differential input can help reject common-mode disturbances when the source is balanced and the analog front end is designed accordingly. It is less suitable for waveform capture, motor-control feedback, or other signals requiring sampling rates above the kilohertz range.

Circuit design should follow the manufacturer datasheet for input filtering, reference voltage, bypass capacitance, and digital-interface implementation. Because sigma-delta converters reject out-of-band noise through digital filtering, the input network should suppress interference near the conversion bandwidth without unnecessarily increasing noise in the measured signal band.

This product overview combines the manufacturer specifications with practical guidance for sensor acquisition, package selection, replacement planning, and PCB implementation. It also highlights where pin-compatible family members differ in conversion rate and where a direct drop-in substitution must be selected against the complete electrical requirements of the original design.

Mga alternatibo na pwedeng ilagay na MCP3550-50E/MS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

MCP3550-60E/MS

✅ Drop-In
📦 8-pin MSOP
Conversion rate changes from 12.5 samples/s to 13.75 samples/s, a 10% increase; resolution remains 22 bit and the package remains MSOP-8.

📋 Alternatibo na Reference (hindi sa katalogo)

MCP3550-50E/MS Mga Pinakamataas na Rating at Electrical Characteristics

ADC Resolution 22 bit
Conversion Rate 12.5 samples/s
Number of Channels 1 channel
Architecture Delta-sigma
Input Type Fully differential
Input Logic Single-ended or differential signal conditioning
Maximum Supply Voltage 4.5 V
Digital Interface SPI
Hanay ng Temperature na Operasyon -40 °C to +125 °C
Packhaging 8-pin MSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MCP3550-50E/MS 8-pin msop

Pin configuration para sa MCP3550-50E/MS (8-pin msop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin msop package para sa MCP3550-50E/MS

Wala ng detalyadong pinout data na magagamit para sa MCP3550-50E/MS.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MCP3550-50E/MS ay nararapat para sa 6 aplikasyons: Industrial Pressure Transducers, Temperature and Humidity Monitoring, Process-Control Instrumentation, Battery-Powered Sensor Nodes, Precision Bridge Measurement, Data Acquisition and Test Equipment.

🏭

Industrial Pressure Transducers

The MCP3550-50E/MS fits slow industrial pressure measurements where high resolution and low analog noise matter more than rapid sampling. Its 22-bit converter resolves small changes in a conditioned bridge or pressure-sensor output, while the fully differential input helps preserve the useful difference between two sensing nodes. At 12.5 samples per second, it can support monitoring and alarm functions without the power and timing demand of a high-speed ADC. The principal design consideration is filtering: place the differential input network close to the MSOP-8 pins and select components according to the manufacturer’s sensor-interface guidance.

🧩

Temperature and Humidity Monitoring

MCP3550-50E/MS is appropriate for thermal and environmental sensors whose values change slowly. A 22-bit conversion result provides ample code density for calibrated temperature or humidity channels, and the 12.5-sample-per-second rate is adequate for supervisory, HVAC, storage, and environmental-control systems. Its differential input can be driven by a resistive network or a suitably conditioned sensor bridge. Designers should allow adequate settling time after sensor changes and use input filtering that preserves slow, meaningful variations rather than unnecessarily narrowing the measurement bandwidth.

⚡

Process-Control Instrumentation

The MCP3550-50E/MS supports process-control measurements in which a transmitter presents a slowly changing differential voltage. Its 22-bit resolution improves sensitivity to small process variations, while the fully differential input reduces sensitivity to common-mode voltage when the source and front end are properly balanced. The MSOP-8 package also supports compact multi-channel measurement boards. Keep analog routing short, use a quiet reference arrangement, and implement digital filtering or averaging only after confirming that the resulting response meets the control-loop bandwidth requirement.

📱

Battery-Powered Sensor Nodes

MCP3550-50E/MS can serve as the measurement converter in a battery-powered industrial or environmental sensor node because it is designed as a low-power, single-channel sigma-delta ADC. Its 12.5-sample-per-second conversion rate matches slowly varying sensor readings, allowing the system controller to remain in a low-activity state between measurements. The differential analog input also supports compact, balanced sensor interfaces. Power budgeting must include both the ADC and its support circuitry, and the final sampling interval should be selected to preserve useful sensor response without wasting energy.

🔧

Precision Bridge Measurement

The MCP3550-50E/MS is well matched to resistive bridge measurements because it provides 22-bit resolution and a fully differential input in a compact 8-pin MSOP package. Differential excitation and sensing can reduce sensitivity to supply variation and common-mode noise, provided the bridge and instrumentation are balanced correctly. The converter’s digital filtering suppresses noise outside its useful measurement band. For best results, follow the input-biasing and filtering guidance in the manufacturer datasheet and avoid placing high-current or switching traces directly beside the sensitive analog pins.

🖥️

Data Acquisition and Test Equipment

MCP3550-50E/MS can provide accurate low-speed measurements in laboratory and industrial data-acquisition systems. Its 22-bit resolution is useful when the goal is to capture small analog changes with a limited sample rate, while the 12.5-sample-per-second operation avoids the complexity and power burden of a high-speed converter. A microcontroller or test controller can read the results over SPI and apply calibration, filtering, or logging. Ensure the analog source can settle within the conversion timing and do not use this device where waveform features require significantly faster acquisition.

Buod ng mga Inirekomendang Produkto

MCP3550-50E/MS Microchip Technology Ginagamit sa: Industrial Pressure Transducers, Temperature and Humidity Monitoring, Process-Control Instrumentation, Battery-Powered Sensor Nodes, Precision Bridge Measurement, Data Acquisition and Test Equipment MCP3550-50 Manufacturer base-family product Ginagamit sa: Industrial Pressure Transducers, Temperature and Humidity Monitoring, Process-Control Instrumentation, Battery-Powered Sensor Nodes, Precision Bridge Measurement, Data Acquisition and Test Equipment
What are the key specifications of MCP3550-50E/MS that engineers should know?
The MCP3550-50E/MS is a 22-bit, single-channel delta-sigma ADC with a conversion rate of 12.5 samples per second, fully differential inputs, an SPI interface, and an 8-pin MSOP package. According to the Microchip MCP3550/1/3 Data Sheet, document 20001950F, the device operates from -40 °C to +125 °C. Its 4.5 V maximum supply rating and differential input architecture are particularly important for battery-powered industrial instrumentation and precision sensor interfaces.
What is the conversion rate of MCP3550-50E/MS?
The MCP3550-50E/MS converts input samples at 12.5 samples per second. This specification identifies it as the -50 speed variant within the Microchip MCP3550 family. According to the Microchip MCP3550/1/3 Data Sheet, document 20001950F, the family supports fully differential analog inputs for industrial control and process-control applications. The rate is appropriate for slowly varying sensor signals rather than high-bandwidth waveform acquisition.
Where can I download the MCP3550-50E/MS datasheet PDF?
The official MCP3550/1/3 Data Sheet is available as PDF document 20001950F from Microchip Technology. It covers the MCP3550, MCP3551, and MCP3553 low-power, single-channel 22-bit delta-sigma ADC family, including fully differential inputs, the -40 °C to +125 °C operating range, and MSOP or SOIC package options. Use the pin-description and electrical-characteristics tables when assigning pins and designing the analog interface.
Where can I find the MCP3550-50E/MS pinout?
The MCP3550-50E/MS pinout is shown in the package information and pin-description sections of Microchip Data Sheet 20001950F. The orderable MCP3550-50E/MS configuration uses an 8-pin MSOP package, while the related MCP3550-50E/SN configuration uses an 8-pin SOIC package. Do not interchange those land patterns, and use the manufacturer pin table to identify analog inputs, reference, supply, ground, and digital-interface functions.
Where to buy MCP3550-50E/MS online?
Use the Request a Quote form on this page to request MCP3550-50E/MS availability, lead time, and an order quotation. The manufacturer lists the MCP3550-50 family as in production, and the exact MCP3550-50E/MS order code is associated with an 8-pin MSOP package. Confirm the package suffix, delivery quantity, and traceability requirements with the supplier before releasing a production order.
What is the price of MCP3550-50E/MS?
Pricing for MCP3550-50E/MS depends on order quantity, procurement volume, and supply conditions. Use the Request a Quote form on this page for a current quotation rather than relying on a historical catalog figure. When requesting a quote, specify the exact MCP3550-50E/MS order code, required quantity, acceptable delivery date, and whether reel, cut-tape, or other approved packing is needed.
What is the lead time for MCP3550-50E/MS?
The current MCP3550-50E/MS lead time is established when the order is quoted. Use the Request a Quote form on this page and state the required quantity and target delivery date. Microchip lists the MCP3550-50 family as in production, but production status does not by itself guarantee a specific lot, stock level, or delivery date, so schedule confirmation should precede commitment to a build.
Is MCP3550-50E/MS in stock?
MCP3550-50E/MS availability depends on the requested quantity and current inventory position. Use the Request a Quote form on this page to obtain a current stock and lead-time response for the exact 8-pin MSOP order code. Microchip identifies the MCP3550-50 family as in production, which supports ongoing sourcing planning, but lot availability and delivery timing should be confirmed for each order.
MCP3550-50E/MS vs MCP3550-60E/MS - which is better for slow sensor measurement?
Choose MCP3550-50E/MS when 12.5 samples per second is sufficient and slower conversion is acceptable; choose MCP3550-60E/MS when the design needs the faster -60 speed option. Both belong to the same Microchip MCP3550 family and use the MSOP ordering family, but their conversion-rate requirements are not identical. The Microchip cross-reference information identifies MCP3550-60E/MS as a direct substitute for MCP3550T-60E/MS, making timing and filter design the decisive considerations.
What is the difference between MCP3550-50E/MS and MCP3550T-50E/MS?
MCP3550-50E/MS and MCP3550T-50E/MS represent the same 22-bit, 12.5-sample-per-second MCP3550 function, with the T designation identifying the manufacturer's tape-and-reel ordering option. Their electrical functionality is not a different converter design; the distinction is packing. Nevertheless, a reel-code variant should not be treated as a separate engineering alternative. Confirm that the requested package suffix, MSOP-8 land pattern, temperature grade, and delivery format match the assembled board.
When should I choose MCP3550-50E/MS over a faster ADC?
Choose MCP3550-50E/MS when the target signal is slow, the required output rate is no greater than 12.5 samples per second, and high resolution with a fully differential sigma-delta input is more valuable than rapid sampling. It is well matched to pressure, temperature, humidity, and industrial process signals. Select a faster ADC when the waveform contains high-frequency content, timing must be predictable at kilohertz or megahertz rates, or digital filtering cannot tolerate the longer sigma-delta settling behavior.
Is MCP3550-50E/MS suitable for pressure and temperature sensors?
Yes, MCP3550-50E/MS is suitable for pressure, temperature, and humidity measurements that change slowly. Its 22-bit resolution and fully differential input architecture suit bridge sensors and conditioned analog signals, while the 12.5-sample-per-second rate is sufficient for many industrial monitoring functions. According to Microchip Data Sheet 20001950F, the device is intended for sensor, industrial-control, and process-control applications operating from -40 °C to +125 °C.
What can replace MCP3550-50E/MS?
MCP3550-60E/MS is the closest identified Microchip drop-in candidate because it belongs to the same MCP3550 MSOP family and is listed as a direct substitute in cross-reference data. It offers a different conversion-rate option, so confirm that 13.75 samples per second or the associated timing meets the original sensor and digital-filter requirements. No cross-brand equivalent was confirmed as both pin-to-pin compatible and parametrically equivalent, so do not treat a generic 22-bit ADC as an automatic replacement.
What is the best cross-brand equivalent for MCP3550-50E/MS?
No cross-brand equivalent is confirmed for MCP3550-50E/MS. A valid replacement must match the 8-pin MSOP footprint, differential pin arrangement, SPI-compatible interface, 22-bit conversion behavior, and the required conversion rate of 12.5 samples per second. The available cross-reference results identify Microchip MCP3550 family members but do not establish a qualified competitor part with the same pinout and timing. Request an engineering cross-reference from Microchip if an alternate-source device is mandatory.
How should MCP3550-50E/MS be connected for a differential sensor?
Connect the sensor differentially across the MCP3550-50E/MS analog inputs and use the input-filter network specified in Microchip Data Sheet 20001950F. Keep the differential pair physically short, matched, and away from switching nodes, and provide the required bypass capacitors close to the supply and reference pins. The ADC performs digital filtering, but an appropriately chosen analog filter still limits interference near the signal bandwidth and prevents out-of-band energy from affecting the measurement.

Impormasyon ng Talumpati sa Engineering for MCP3550-50E/MS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MCP3550-50E/MS for low-speed, high-resolution sensor acquisition when the design operates from an 8-pin MSOP footprint, uses a fully differential input, and needs 12.5 samples per second. It is a strong fit for pressure, temperature, humidity, bridge, and industrial process measurements that change slowly. MCP3550-60E/MS is the practical drop-in candidate when its 13.75-sample-per-second timing better matches the application, but conversion timing and digital-filter behavior must be checked. Do not select the SOIC MCP3550-50E/SN for an existing MSOP layout, and do not use either converter for high-bandwidth waveform capture. For regulated industrial equipment, verify the operating temperature, supply range, reference requirements, and qualification status directly from the manufacturer documentation before release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MCP3550-60E/MS
Brand Microchip Technology Microchip Technology
Package 8-pin MSOP 8-pin MSOP - same
ADC Resolution 22 bit 22 bit
Conversion Rate 12.5 samples/s 13.75 samples/s
Number of Channels 1 channel 1 channel
Architecture Delta-sigma Delta-sigma
Input Configuration Fully differential Fully differential
Digital Interface SPI SPI
Maximum Supply Voltage 4.5 V 4.5 V
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C

Pangunahing mga Pagkakaiba

  • Lower conversion rate supports a 12.5-sample-per-second measurement mode (kumpara saMCP3550-60E/MS)
  • Compact MSOP implementation for space-constrained sensor boards (kumpara saMCP3550-50E/SN)
  • High-resolution conversion for slow precision signals (kumpara saMCP3550-60E/MS)

Talaan ng Disenyo

Place the differential input traces, reference components, and bypass capacitors close to their corresponding MCP3550-50E/MS pins. Route the analog pair as a compact, balanced pair and keep switching-regulator, relay, and high-current return paths away from the input and reference nodes. The MSOP-8 land pattern offers little routing space, so component placement and via use should be decided before the analog and digital sections are routed.

Design the analog filter for the slow measurement bandwidth rather than copying a generic RC value. Sigma-delta digital filtering rejects many out-of-band disturbances, but excessive analog filtering can increase settling time or reduce useful signal amplitude. Begin with the input-network guidance in Microchip Data Sheet 20001950F and validate attenuation, noise, and transient response in the assembled board. Maintain symmetry where the source is differential to avoid converting common-mode noise into an input error.

Use a quiet, low-impedance supply and reference arrangement because conversion accuracy ultimately depends on the analog operating conditions. Place required bypass capacitors next to the supply pins and decouple any reference node according to the manufacturer recommendations. Check the exact supply range, analog and digital current consumption, and power-up sequence before finalizing the board. Do not infer equivalent input impedance or settling behavior from a different MCP3550 speed variant.

Do not confuse the MSOP-8 MCP3550-50E/MS with MCP3550-50E/SN, which uses an 8-pin SOIC package, or assume that a 12.5-sample-per-second converter can capture high-frequency waveforms. Also distinguish electrical variants from ordering suffixes such as the T tape-and-reel code. Verify the manufacturer pin table, package drawing, conversion timing, and filtering requirements before approving a substitute or laying out a replacement board.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MCP3550-50E/MS order code. Confirm compliance with the manufacturer using the ordering code and required production volume.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

mcp3550 datasheet mcp3550 pdf MCP3550-50E/MS datasheet MCP3550-50E/MS pinout MCP3550-50E/MS specifications MCP3550-50E/MS equivalent MCP3550-50E/MS replacement MCP3550-50E/MS vs MCP3550-60E/MS Microchip MCP3550-50E/MS MCP3550-50E/MS MSOP-8 footprint MCP3550-50E/MS pressure sensor MCP3550-50E/MS price MCP3550-50E/MS stock 22 bit 12.5 SPS ADC

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology MCP3550-50E/MS MCP3550-50 MCP3550-60E/MS MCP3550T-50E/MS MCP3550-50E/SN 22-bit ADC delta-sigma ADC sigma-delta ADC analog-to-digital converter single-channel ADC fully differential input SPI 12.5 samples per second MSOP-8 SOIC-8 surface mount pressure sensor temperature sensor humidity sensor industrial process control output noise common-mode rejection Microchip Data Sheet 20001950F
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ