Microchip Technology

MCP602T-I/SN - Dual 2.8 MHz Rail-to-Rail CMOS Op Amp

MPN: MCP602T-I/SN ✓ Nakahanda
Less than 2 mV Vdss 230 uA per amplifier Id 8-pin SOIC Package
MOQ: 1 |

MCP602T-I/SN Ulas

The Microchip Technology MCP602T-I/SN is a dual CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, typical operating current of 230 uA per amplifier, and typical offset voltage below 2 mV, supplied in an 8-pin SOIC package. The device combines low bias current, high open-loop gain, rail-to-rail output swing, and single-supply operation for compact analog signal-processing systems.

An operational amplifier is a voltage-gain stage used to amplify, buffer, filter, or compare small differential signals. The MCP602 belongs to the CMOS operational-amplifier hierarchy, combining rail-to-rail input and output behavior with low power consumption. This makes it useful when the signal must be processed close to its source without adding substantial supply-current overhead.

The MCP602 family provides two amplifiers in one 8-pin SOIC package. Its 2.8 MHz gain-bandwidth product supports moderate-frequency closed-loop operation, while the 230 uA typical operating current supports battery-powered and portable equipment. Rail-to-rail output swing increases usable output range, and the typical input offset voltage below 2 mV supports precision-oriented signal conditioning.

Microchip’s CMOS implementation provides low input bias current and high open-loop gain while maintaining a low typical operating current. The dual configuration reduces package count when two independent analog channels are required. Because the amplifier operates from a single supply, it also fits systems where a negative supply is unavailable or undesirable.

Typical uses include low-power sensor conditioning, general-purpose voltage buffering, audio and instrumentation signal stages, active filtering, and low-frequency control loops. The 2.8 MHz gain-bandwidth product is appropriate for moderate-bandwidth analog paths rather than high-speed video or RF amplification.

When designing a PCB around the MCP602T-I/SN, keep feedback components and bypass capacitance close to the relevant pins, maintain a common ground reference between the two channels, and check output-drive requirements at the selected supply voltage and load. These practices reduce parasitic feedback and preserve the expected closed-loop response.

This product page combines manufacturer specifications, package and pinout guidance, application analysis, and engineering-focused alternatives. It is intended to help designers evaluate the MCP602T-I/SN quickly while retaining the datasheet as the controlling document for ratings, limits, and production implementation.

Mga alternatibo na pwedeng ilagay na MCP602T-I/SN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MCP602T-I/SN (parehas na form factor at footprint) — pagkakaiba sa Gain-Bandwidth Product, Package, Typical Operating Current.

Microchip Technology
Gain-Bandwidth Product: 2.8 MHz typical
Package: 8-SOIC, 0.154 inch / 3.90 mm body width
Typical Operating Current: 230 uA per amplifier typical

MCP602T-E/SN

✅ Drop-In
Microchip Technology
📦 8-pin SOIC
General-purpose CMOS operational amplifier · 2 circuits · 2.8 MHz typical · 2.3 V/us typical · 230 uA per amplifier typical · Less than 2 mV typical · 2.7 V to 6.0 V · Rail-to-rail

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP6022T-I/SN

✅ Drop-In
📦 8-pin SOIC
Retains 2 amplifier channels and the 8-pin SOIC footprint, a 0-count package and channel difference; device-specific gain and offset differences require comparison.

📋 Alternatibo na Reference (hindi sa katalogo)

MCP6023T-I/SN

✅ Drop-In
📦 8-pin SOIC
Retains 2 amplifier channels and the 8-pin SOIC footprint, a 0-count package and channel difference; device-specific gain and offset differences require comparison.

📋 Alternatibo na Reference (hindi sa katalogo)

MCP6002T-I/SN

✅ Drop-In
📦 8-pin SOIC
Gain-bandwidth product is 1 MHz versus 2.8 MHz, 64% lower; both provide 2 amplifier channels in an 8-pin SOIC package.

📋 Alternatibo na Reference (hindi sa katalogo)

MCP6002T-E/SN

✅ Drop-In
📦 8-pin SOIC
Retains 2 amplifier channels and the 8-pin SOIC footprint, a 0-count package and channel difference; temperature-grade and device-specific electrical differences require comparison.

📋 Alternatibo na Reference (hindi sa katalogo)

MCP602T-I/SN Mga Pinakamataas na Rating at Electrical Characteristics

Number of Amplifiers 2 amplifiers
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA per amplifier
Typical Input Offset Voltage Less than 2 mV
Supply Voltage Range 2.7 V to 6.0 V
Technology CMOS
Output Swing Rail-to-rail
Input Bias Current Low bias current
Open-Loop Gain High open-loop gain
Bilang ng Pins 8 pins
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng MCP602T-I/SN 8-pin soic

Pin configuration para sa MCP602T-I/SN (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa MCP602T-I/SN

Wala ng detalyadong pinout data na magagamit para sa MCP602T-I/SN.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MCP602T-I/SN ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Conditioning, Portable Audio Signal Buffering, Industrial Instrumentation Amplification, Active Filtering and Control Loops, Low-Power Voltage Comparison, Compact Interface Buffering.

🧩

Battery-Powered Sensor Conditioning

The MCP602T-I/SN fits low-power sensor front ends because each amplifier draws 230 uA typical operating current while providing a 2.8 MHz gain-bandwidth product. Place the dual channels around sensor outputs for buffering and gain shaping without introducing a separate amplifier for each signal. The 2.7 V to 6.0 V supply range supports battery-powered electronics, while rail-to-rail output swing increases the usable signal range in compact systems. Before finalizing the circuit, verify the sensor output against the amplifier input common-mode range and confirm that the selected gain produces acceptable phase margin at the operating frequency.

🎧

Portable Audio Signal Buffering

The MCP602T-I/SN is suitable for audio preamplifier and buffering stages where low supply current and rail-to-rail output swing are important. Its 2.8 MHz gain-bandwidth product provides more closed-loop bandwidth than a 1 MHz low-power stage, while the 230 uA typical operating current per channel limits supply demand in portable equipment. The two amplifiers can support independent left and right paths or separate control and monitoring functions. Set the closed-loop gain and feedback-network values against the required audio bandwidth, and verify output swing into the next stage with realistic load and output-voltage conditions.

🏭

Industrial Instrumentation Amplification

The MCP602T-I/SN can provide input buffering and gain stages for low-frequency industrial instrumentation signals. Its typical offset voltage below 2 mV supports accurate signal conditioning, while the 2.8 MHz gain-bandwidth product accommodates higher closed-loop gains better than a 1 MHz general-purpose dual amplifier. The dual 8-pin SOIC device also allows two measurement channels to share a compact board area. For instrumentation use, check input bias current, common-mode range, noise, output drive, and the input protection network, because sensor interfaces can impose requirements beyond basic gain and bandwidth.

🔧

Active Filtering and Control Loops

The MCP602T-I/SN is appropriate for active filters and low-frequency control loops that require more bandwidth than the MCP6002 family’s 1 MHz gain-bandwidth product. At 2.8 MHz, the device supports closed-loop operation at frequencies that are useful for audio-adjacent signal shaping, sensor conditioning, and modest control loops. Both channels can implement Sallen-Key or related active-filter sections when component tolerances and noise are handled carefully. Evaluate each filter stage for noise gain, phase margin, component tolerance, and output-load stability rather than selecting the gain-bandwidth value alone.

⚡

Low-Power Voltage Comparison

The MCP602T-I/SN can implement dual voltage comparators or threshold detectors when open-loop operation is stable under the chosen conditions. The dual architecture fits battery monitoring, control thresholds, and discrete sensor-alarm functions without requiring two separate amplifier packages. Its typical operating current of 230 uA per channel supports low-power monitoring, while the 2.8 MHz gain-bandwidth product provides response capability beyond a 1 MHz comparator-like substitute. Add hysteresis to prevent repeated switching near the threshold, and use pull-up or pull-down arrangements that remain valid for the selected output voltage and supply range.

🖥️

Compact Interface Buffering

The MCP602T-I/SN is useful for buffering outputs from slow sensors, converters, or digital control lines before they enter a higher-impedance measurement chain. Low bias current reduces loading on the source, rail-to-rail output swing preserves signal range in low-voltage systems, and the 2.8 MHz gain-bandwidth product gives more bandwidth than the MCP6002T-I/SN option. The dual package supports two buffered signals in one 8-pin SOIC. Confirm the source impedance, capacitive load, output settling requirements, and stability configuration, especially if the connected source includes long PCB traces or slow edges.

Buod ng mga Inirekomendang Produkto

MCP602 Dual low-power CMOS operational-amplifier family member Ginagamit sa: Battery-Powered Sensor Conditioning, Portable Audio Signal Buffering, Industrial Instrumentation Amplification, Active Filtering and Control Loops, Low-Power Voltage Comparison, Compact Interface Buffering MCP601 Single-channel companion in the same low-power CMOS family Ginagamit sa: Battery-Powered Sensor Conditioning, Portable Audio Signal Buffering, Active Filtering and Control Loops, Low-Power Voltage Comparison, Compact Interface Buffering MCP604 Quad-channel companion for higher channel count Ginagamit sa: Battery-Powered Sensor Conditioning, Portable Audio Signal Buffering, Active Filtering and Control Loops, Compact Interface Buffering MCP601R Single-channel companion with rail-to-rail input and output characteristics Ginagamit sa: Industrial Instrumentation Amplification MCP603 Single-channel companion with chip-select support Ginagamit sa: Industrial Instrumentation Amplification, Low-Power Voltage Comparison
What are the key specifications of MCP602T-I/SN that engineers should know?
The MCP602T-I/SN is a dual CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, 230 uA typical operating current, and typical offset voltage below 2 mV. According to the Microchip MCP602 product page, it uses advanced CMOS technology to provide low bias current, high open-loop gain, and rail-to-rail output swing. The device operates from a single supply and is packaged in an 8-pin SOIC. These characteristics make it suitable for low-power buffering, sensor conditioning, filtering, and general analog signal processing.
What is the operating voltage of MCP602T-I/SN?
The MCP602T-I/SN operates from a single supply of 2.7 V to 6.0 V. The range is identified in the Microchip MCP602T-I datasheet listing and is consistent with the manufacturer’s low-power CMOS operational-amplifier family. Operation near the lower limit provides less headroom for output swing, while operation near 6.0 V increases available output range but reduces voltage margin. Confirm absolute-maximum ratings and temperature limits in the manufacturer datasheet before finalizing the power architecture.
What is the gain-bandwidth product and operating current of MCP602T-I/SN?
The MCP602T-I/SN provides a 2.8 MHz gain-bandwidth product and a typical operating current of 230 uA per amplifier. According to the Microchip MCP602 product page, these figures position the device between very-low-speed micropower amplifiers and much faster general-purpose op amps. The 2.8 MHz bandwidth is suitable for moderate-frequency closed-loop stages, while 230 uA per channel helps limit power demand in dual-channel battery-powered equipment. Actual current can vary with supply voltage, common-mode voltage, output swing, and load.
Does MCP602T-I/SN support rail-to-rail output operation?
Yes, the MCP602T-I/SN supports rail-to-rail output swing. The Microchip MCP602 product page identifies rail-to-rail output behavior as a defining feature of its advanced CMOS implementation. This allows the output to approach the supply rails more closely than a conventional non-rail-to-rail amplifier, which is valuable in low-voltage systems where signal headroom is limited. The input common-mode range should still be checked separately because output and input ranges do not necessarily share identical limits.
Where can I download the MCP602T-I/SN datasheet PDF?
The MCP602T-I/SN datasheet PDF is available from the official Microchip document link on this page. The document covers the MCP601, MCP601R, MCP602, MCP603, and MCP604 low-power CMOS operational-amplifier family, including the dual MCP602 configuration. Use the manufacturer datasheet as the controlling reference for electrical characteristics, absolute maximum ratings, pin assignments, test conditions, and ordering information. The related Microchip product page provides a convenient overview of the family’s 2.8 MHz bandwidth and 230 uA typical operating current.
Where is the MCP602T-I/SN pinout located?
The MCP602T-I/SN pinout is located in the pin-description and package-drawing sections of the official Microchip MCP602 family datasheet. The device is an 8-pin SOIC containing two independent operational-amplifier channels. Because the package drawing defines the physical pin numbering and exposed connections, use that table directly when assigning PCB nets. The manufacturer datasheet is preferable to an unverified diagram when creating a new layout or confirming input, output, supply, and ground connections.
Where can I buy MCP602T-I/SN online?
You can request MCP602T-I/SN availability and a quotation through the Request a Quote form on this product page. The form is the appropriate route for checking exact suffix availability, current lead time, quantity requirements, and packaging needs. The MCP602T-I/SN is an active 8-pin SOIC ordering code, but production planning should be based on a current quotation for the exact manufacturer part number rather than historical listing status. Provide your target quantity, delivery schedule, and acceptable packaging when submitting the request.
What is the price of MCP602T-I/SN?
Current pricing for MCP602T-I/SN is available through the Request a Quote form on this page. The quote can reflect the requested quantity, exact ordering suffix, and current procurement conditions. Historical distributor prices and market availability can change, so they should not be used as a firm procurement commitment. For design budgeting, use the structured pricing information on the page while treating it as an indication rather than a guaranteed quotation.
What is the lead time for MCP602T-I/SN?
Request the current MCP602T-I/SN lead time through the Request a Quote form on this page. Lead time depends on quantity, scheduled delivery date, and the confirmed status of the exact 8-pin SOIC ordering code. Provide your forecast, required shipment date, and allowable packaging at the time of inquiry. Because inventory positions can change, a quotation response is more useful than a general listing when the component is needed for a production build.
Is MCP602T-I/SN in stock?
Check current MCP602T-I/SN availability through the Request a Quote form on this page. The form allows procurement to confirm quantity, delivery timing, and the exact suffix rather than relying on a potentially stale stock indication. For ongoing production, provide a rolling forecast so the supplier can assess coverage for future builds. Distributor listings may also divide inventory by package, temperature grade, and order code, making a direct availability request the most reliable approach.
What is the difference between MCP602T-I/SN and MCP602T-E/SN?
MCP602T-E/SN and MCP602T-I/SN belong to the same Microchip dual CMOS operational-amplifier family and use the same 8-pin SOIC package. The primary ordering distinction is the temperature-grade suffix: I denotes the industrial temperature option, while E denotes the extended commercial temperature option. Both retain the family-level characteristics of 2.8 MHz gain-bandwidth product and 230 uA typical operating current. Review the ordered temperature ranges and any grade-specific qualification requirements before substituting one suffix for the other.
MCP602T-I/SN vs MCP6002T-I/SN - which is better for signal conditioning?
Choose MCP602T-I/SN for applications needing more closed-loop bandwidth than MCP6002T-I/SN. The Microchip MCP602 family has a 2.8 MHz gain-bandwidth product, while the MCP6002 listing identifies a 1 MHz gain-bandwidth product. Both are dual amplifiers in 8-pin SOIC packages, which supports board-level substitution considerations. The MCP602 therefore offers 180% more nominal bandwidth, while both devices share the low-power CMOS positioning that makes them suitable for portable analog signal conditioning.
When should I choose MCP602T-I/SN over MCP6002T-I/SN?
Choose MCP602T-I/SN when signal bandwidth is more important than minimizing the difference between 1 MHz and 2.8 MHz gain-bandwidth products. The MCP602’s 2.8 MHz nominal bandwidth provides additional closed-loop range for filtering, buffering, and gain stages operating at moderate frequencies. MCP6002T-I/SN may be considered when the slower 1 MHz response is sufficient and the design prioritizes the lower-speed general-purpose family. Both devices use an 8-pin SOIC footprint in the cited product listings.
Is MCP602T-I/SN suitable for battery-powered sensor conditioning?
The MCP602T-I/SN is suitable for many battery-powered sensor-conditioning designs because each amplifier has a typical operating current of 230 uA and the family operates from 2.7 V to 6.0 V. Its rail-to-rail output behavior can improve signal utilization in compact systems with limited supply voltage. For sensor interfaces, verify the input common-mode range and output-load behavior, and calculate worst-case current using maximum supply voltage, temperature, and load rather than the typical operating current alone.
What can replace MCP602T-I/SN as a drop-in dual op amp?
MCP602T-E/SN is the closest same-family drop-in candidate because it retains the dual CMOS amplifier configuration and 8-pin SOIC package. MCP6002T-I/SN is another 8-pin SOIC option, although its 1 MHz gain-bandwidth product is 64% lower than the MCP602’s 2.8 MHz rating. Drop-in status must include verification of pin functions, supply range, input/output range, offset, bias current, noise, slew rate, and temperature grade. MCP6022T-I/SN and MCP6023T-I/SN also appear as family cross-reference candidates and require individual datasheet comparison before production use.

Impormasyon ng Talumpati sa Engineering for MCP602T-I/SN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MCP602T-I/SN for low-power dual-channel analog designs that benefit from a 2.8 MHz gain-bandwidth product, rail-to-rail output swing, and a typical operating current of 230 uA per amplifier. It is especially suitable for sensor buffering, active filters, portable audio paths, and dual threshold functions that require more bandwidth than the MCP6002 family. MCP602T-E/SN is the closest same-family option when the extended commercial temperature ordering grade is appropriate and the I-grade requirements are unnecessary. MCP6002T-I/SN may suit designs whose signal bandwidth is comfortably below its 1 MHz gain-bandwidth product. MCP6022T-I/SN and MCP6023T-I/SN should be considered when their individual electrical characteristics offer a functional advantage, but their temperature ratings, offset, bias current, noise, slew rate, and common-mode limits must be checked against the target circuit. For every option, verify the exact pin functions, supply range, package dimensions, and temperature grade before production substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MCP602T-E/SN MCP6022T-I/SN MCP6023T-I/SN MCP6002T-I/SN MCP6002T-E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Number of Amplifiers 2 2 2 2 2 2

Pangunahing mga Pagkakaiba

  • Higher gain-bandwidth product than the MCP6002 family (kumpara saMCP6002T-I/SN)
  • Closest same-family ordering alternative (kumpara saMCP602T-E/SN)
  • Dual-channel integration reduces package count (kumpara saMCP601)

Talaan ng Disenyo

Place the input, output, feedback, and supply-bypass components close to their associated MCP602T-I/SN pins. Keep each amplifier’s feedback loop physically small to minimize parasitic capacitance and the chance of oscillation at higher closed-loop gains. Route the two channels to maintain consistent grounding and return paths. If the PCB uses long sensor traces, keep those nets away from the power pins and amplifier inputs because coupled noise can appear directly as input-referred error.

Calculate amplifier supply demand using worst-case operating current rather than the 230 uA typical value when sizing the battery or regulator. The dual device contains two amplifiers, so a system that keeps both channels active can draw approximately twice the per-amplifier current before load and supply-voltage effects. The stated 2.7 V to 6.0 V operating range must include tolerance and transient margin. Also verify that the source can support the output swing and capacitive load required by the downstream stage.

Choose the closed-loop gain and feedback resistor values with the 2.8 MHz gain-bandwidth product in mind. Higher noise gain reduces bandwidth and phase margin, so a unity-gain configuration offers substantially more bandwidth than a high-gain stage. For capacitive loading, avoid relying on gain alone to create stability; consult the family guidance and add isolation resistance when the next stage presents excessive capacitance. Confirm settling behavior with the actual source impedance, load, and PCB parasitics.

Do not assume that rail-to-rail output swing guarantees a rail-to-rail input common-mode range. Check input bias current, input voltage range, output load, and absolute maximum limits for the selected supply. For comparator-style operation, add positive feedback hysteresis to avoid output chatter near the threshold. When replacing the device, verify that the alternative has the same amplifier-channel pin functions and operating area rather than comparing package names alone.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status is not stated in the manufacturer product-page excerpt or the other cited product records. Verify the current declarations and material-category documentation with Microchip before release.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

mcp602t i sn datasheet MCP602T-I/SN MCP602T-I/SN datasheet pdf MCP602T-I/SN pinout MCP602T-I/SN equivalent MCP602T-I/SN replacement MCP602T-I/SN cross reference MCP602T-I/SN vs MCP6002T-I/SN Microchip MCP602T-I/SN MCP602T-I/SN 2.8 MHz MCP602T-I/SN 230 uA MCP602T-I/SN price MCP602T-I/SN stock MCP602T-I/SN sensor conditioning MCP602T-I/SN SOIC pinout

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology MCP602T-I/SN MCP602 MCP602T-E/SN MCP6022T-I/SN MCP6023T-I/SN MCP6002T-I/SN MCP6002T-E/SN MCP601 MCP601R MCP603 MCP604 operational amplifier dual operational amplifier CMOS operational amplifier low-dropout regulator linear regulator voltage regulator power management IC semiconductor gain-bandwidth product rail-to-rail output input offset voltage operating current input bias current open-loop gain 8-pin SOIC SOIC package family surface mount SMD
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ