MCP6062-E/SN - Dual Precision R-R Op Amp | Microchip
MPN: MCP6062-E/SN ✓ NakahandaMCP6062-E/SN Ulas
An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The MCP6062 family belongs to the broader hierarchy of operational amplifier, amplifier IC, analog IC, and semiconductor. Its rail-to-rail input stage accepts signals close to either supply rail, while the rail-to-rail output stage provides useful output swing near the rails. The dual configuration integrates two amplifiers in one package, reducing board area compared with two separate single amplifiers.
The main features of the MCP6062-E/SN include rail-to-rail input and output operation, unity-gain stability, a 730 kHz typical gain-bandwidth product, and low quiescent current. Unity-gain stability allows the amplifiers to be configured as voltage followers without external compensation components. Rail-to-rail operation is valuable in low-voltage systems because the usable input and output range extends closer to the supply limits than that of a conventional fixed-input amplifier.
The 60 µA per-amplifier bias current supports low-power instrumentation without requiring a high-speed, high-current design. The 730 kHz gain-bandwidth product provides adequate bandwidth for sensor signals, control loops, active filters, and low-to-moderate-frequency analog systems. Input offset voltage is specified at no more than ±150 µV maximum, an important parameter for preserving accuracy after amplification. The dual amplifier also reduces the number of packages and supply connections needed for common dual-channel analog functions.
Typical uses include battery-powered sensor interfaces, low-frequency active filters, precision signal conditioning, instrumentation amplifiers, audio preamplifier stages, and feedback-control loops. Using two matched amplifiers in one package can simplify circuits such as differential amplifiers, sample-and-hold buffers, and noninverting stages. The 1.8 V minimum supply supports modern low-energy systems, although the selected output swing and input common-mode range should be checked against the actual rail voltages.
A key design consideration is the relationship between closed-loop gain, bandwidth, output loading, and supply voltage. Because the gain-bandwidth product is 730 kHz typical, higher closed-loop gains reduce usable bandwidth. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should be kept short and away from switching nodes. The SOIC outline must also follow the manufacturer's recommended land pattern and thermal guidelines.
Mga alternatibo na pwedeng ilagay na MCP6062-E/SN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboMCP6062-E/SN Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Dual precision operational amplifier |
| Number of Channels | 2 channels |
| Minimum Single-Supply Voltage | 1.8 V |
| Maximum Supply Voltage | 6 V |
| Gain-Bandwidth Product | 730 kHz typical |
| Input Offset Voltage | ±150 µV maximum |
| Kuru-kuryente ng Kapayapaan | 60 µA per amplifier |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Stability | Unity-gain stable |
| Hanay ng Temperature na Operasyon | -40°C to +125°C |
| Packhaging | 8-pin SOIC, 3.90 mm width |
| Uri ng Pagpapasok | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| Shipping Package | Tube |
Gabay sa Pin Configuration ng MCP6062-E/SN tube
Pin configuration para sa MCP6062-E/SN (tube package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa MCP6062-E/SN.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MCP6062-E/SN ay nararapat para sa 6 aplikasyons: Low-Voltage Sensor Signal Conditioning, Battery-Powered Instrumentation, Precision Active Filters, Audio Preamplifier Stages, Industrial Feedback Control, Portable Measurement and Diagnostic Equipment.
Low-Voltage Sensor Signal Conditioning
The MCP6062-E/SN fits sensor conditioning because its rail-to-rail input stage accepts signals near the 1.8 V minimum supply limit, while its 730 kHz typical gain-bandwidth product provides useful signal bandwidth. The two amplifiers can condition complementary or sequential sensor channels without requiring separate packages. The ±150 µV maximum input offset voltage supports accurate low-level measurements, although source impedance and input bias current must also be evaluated. For a bridge, thermocouple, or resistive sensor, the dual arrangement can provide gain and filtering, but the final accuracy budget should include sensor noise, resistor tolerance, and amplifier offset.
Inirekomenda
Battery-Powered Instrumentation
The MCP6062-E/SN is appropriate for battery-powered instrumentation because it operates from a single supply as low as 1.8 V and consumes 60 µA of quiescent current per amplifier. Rail-to-rail input and output operation improves usable signal range in compact systems where available supply headroom is limited. The dual configuration can implement a two-stage amplifier or instrumentation front end with fewer packages than discrete single-channel solutions. Designers should calculate the complete load-driven supply current rather than relying on quiescent current alone, and should verify that the required output swing remains valid at the minimum battery voltage.
Inirekomenda
Precision Active Filters
The MCP6062-E/SN can implement first-order or conventional second-order active filters where the 730 kHz typical gain-bandwidth product provides adequate closed-loop bandwidth. Its unity-gain stability supports follower-based topologies, while rail-to-rail input and output operation is useful when signals occupy much of the available supply range. The dual package allows a filter and an output buffer to share one component. Component tolerances and amplifier offset ultimately determine filter accuracy, so precision resistors and a suitable noise analysis should accompany the nominal gain-bandwidth calculation.
Inirekomenda
Audio Preamplifier Stages
The MCP6062-E/SN is suitable for low-to-moderate-frequency audio preamplification where a dual amplifier can provide two gain stages or a differential signal path in one 8-pin SOIC. Rail-to-rail input avoids the restrictions of a fixed common-mode range in low-voltage audio systems, while rail-to-rail output improves swing toward the supply rails. The 730 kHz typical gain-bandwidth product is appropriate for many line-level audio bandwidths, though actual noise, output-current capability, and capacitive-load stability should be checked for the selected topology and source impedance.
Inirekomenda
Industrial Feedback Control
The MCP6062-E/SN can serve as the error amplifier and output driver in a low-frequency industrial feedback loop. Its 1.8 V minimum supply supports compact control systems, and the 730 kHz typical gain-bandwidth product is sufficient for many slow plant-control loops. The dual channel allows one amplifier to drive the error path while the second provides sensing or buffering. The extended -40°C to +125°C operating range supports industrial temperature requirements, but stability must be evaluated with the sensor, actuator, compensation network, output load, and control-loop gain rather than bandwidth alone.
Inirekomenda
Portable Measurement and Diagnostic Equipment
The MCP6062-E/SN fits portable measurement equipment that combines low supply voltage, precision signal capture, and limited board area. Its ±150 µV maximum input offset voltage supports accurate amplification of low-level diagnostic signals, while 60 µA of quiescent current per amplifier limits standby demand. Two integrated channels can provide simultaneous measurements, differential excitation, or gain and filtering stages. For medical and diagnostic-adjacent equipment, the signal path should be reviewed for noise, electromagnetic interference, patient-protection requirements, and separation from hazardous circuits rather than relying on amplifier specifications alone.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MCP6062-E/SN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 8-pin SOIC, 3.90 mm width |
| Brand | Microchip Technology |
| Number of Amplifiers | 2 channels |
| Minimum Supply Voltage | 1.8 V |
| Maximum Supply Voltage | 6 V |
| Gain-Bandwidth Product | 730 kHz typical |
| Input Offset Voltage | ±150 µV maximum |
| Quiescent Current | 60 µA per amplifier |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Gain Stability | Unity-gain stable |
| Operating Temperature Range | -40°C to +125°C |
| Automotive Qualification | AEC-Q100 qualified |
Pangunahing mga Pagkakaiba
- Combines two precision amplifiers with low quiescent current (kumpara saMCP6061)
- Supports low-voltage operation with rail-to-rail signal handling (kumpara saMCP6064)
- Matches the MCP6062 family's precision performance (kumpara saMCP6062T-E/SN)
Talaan ng Disenyo
Do not treat the rail-to-rail designation as a guarantee of exact rail-to-rail output swing. Check the output-voltage-versus-current curves in the manufacturer documentation for the selected supply voltage and load. Also verify that the input source stays within the operating common-mode range at temperature. A source impedance much greater than the amplifier input resistance can create offset error, while capacitive loading can affect stability even though the MCP6062-E/SN is unity-gain stable.
Place the supply bypass capacitor close to the positive and ground pins of the SOIC and keep the return path short to reduce parasitic inductance. Route sensitive input and feedback traces away from digital clocks, switching-regulator nodes, and high-current outputs. If the circuit operates near its gain-bandwidth limit, keep the feedback loop compact and minimize board capacitance around the op-amp inputs. Use the manufacturer land pattern rather than a generic 8-pin SOIC footprint.
Estimated: with each amplifier at 60 µA quiescent current, a 5 V supply and no significant load produce approximately 0.6 mA total supply current and 3 mW total dissipation. Actual current increases according to the output current and the output-to-supply voltage difference. This calculation is an estimate based on the documented 60 µA per amplifier and 5 V operating point; use worst-case load, supply, and temperature conditions for the final power budget.
Select feedback resistors to keep resistor thermal noise and input-bias-current error within the circuit's error budget. High source impedances can magnify input-bias-current effects, while very small feedback resistors can increase output-current demand and capacitive-load risk. For precision filters, include amplifier offset, bias current, resistor tolerance, and bandwidth in the uncertainty analysis. Use short, guarded input traces and provide a nearby ground reference to reduce coupled noise.
Impormasyon ng Pagsunod sa Kautusan
The MCP6062-E/SN ordering information identifies the device as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or material declaration.