Microchip Technology

MCP6062-E/SN - Dual Precision R-R Op Amp | Microchip

N.º de pieza: MCP6062-E/SN ✓ Activo
1.8 V Vdss 60 µA per amplifier Id 8-pin SOIC, 3.90 mm width Package
MOQ: 1 |

MCP6062-E/SN Descripción general

Microchip Technology MCP6062-E/SN is a dual precision operational amplifier featuring rail-to-rail input and output, a typical gain-bandwidth product of 730 kHz, and operation from a single supply as low as 1.8 V. The device is packaged in an 8-pin SOIC and is specified for an extended -40°C to +125°C temperature range. Each amplifier offers a maximum input offset voltage of ±150 µV and low quiescent current of 60 µA per amplifier, making the MCP6062-E/SN suitable for precision signal chains operating from low-voltage sources.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the difference between two input voltages. The MCP6062 family belongs to the broader hierarchy of operational amplifier, amplifier IC, analog IC, and semiconductor. Its rail-to-rail input stage accepts signals close to either supply rail, while the rail-to-rail output stage provides useful output swing near the rails. The dual configuration integrates two amplifiers in one package, reducing board area compared with two separate single amplifiers.

The main features of the MCP6062-E/SN include rail-to-rail input and output operation, unity-gain stability, a 730 kHz typical gain-bandwidth product, and low quiescent current. Unity-gain stability allows the amplifiers to be configured as voltage followers without external compensation components. Rail-to-rail operation is valuable in low-voltage systems because the usable input and output range extends closer to the supply limits than that of a conventional fixed-input amplifier.

The 60 µA per-amplifier bias current supports low-power instrumentation without requiring a high-speed, high-current design. The 730 kHz gain-bandwidth product provides adequate bandwidth for sensor signals, control loops, active filters, and low-to-moderate-frequency analog systems. Input offset voltage is specified at no more than ±150 µV maximum, an important parameter for preserving accuracy after amplification. The dual amplifier also reduces the number of packages and supply connections needed for common dual-channel analog functions.

Typical uses include battery-powered sensor interfaces, low-frequency active filters, precision signal conditioning, instrumentation amplifiers, audio preamplifier stages, and feedback-control loops. Using two matched amplifiers in one package can simplify circuits such as differential amplifiers, sample-and-hold buffers, and noninverting stages. The 1.8 V minimum supply supports modern low-energy systems, although the selected output swing and input common-mode range should be checked against the actual rail voltages.

A key design consideration is the relationship between closed-loop gain, bandwidth, output loading, and supply voltage. Because the gain-bandwidth product is 730 kHz typical, higher closed-loop gains reduce usable bandwidth. Decoupling capacitors should be placed close to the supply pins, and sensitive input traces should be kept short and away from switching nodes. The SOIC outline must also follow the manufacturer's recommended land pattern and thermal guidelines.

Alternativas directas para MCP6062-E/SN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

MCP6062-E/SN Valores máximos y características eléctricas

Amplifier Type Dual precision operational amplifier
Number of Channels 2 channels
Minimum Single-Supply Voltage 1.8 V
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 730 kHz typical
Input Offset Voltage ±150 µV maximum
Corriente en reposo 60 µA per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Rango de temperatura de funcionamiento -40°C to +125°C
Encapsulado 8-pin SOIC, 3.90 mm width
Tipo de montaje Surface mount
Automotive Qualification AEC-Q100 qualified
Shipping Package Tube

Guía de configuración de pines de MCP6062-E/SN tube

Configuración de pines para MCP6062-E/SN (encapsulado tube). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado tube para MCP6062-E/SN

No hay datos detallados de patillaje disponibles para MCP6062-E/SN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MCP6062-E/SN es adecuado para 6 aplicacións: Low-Voltage Sensor Signal Conditioning, Battery-Powered Instrumentation, Precision Active Filters, Audio Preamplifier Stages, Industrial Feedback Control, Portable Measurement and Diagnostic Equipment.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6062-E/SN fits sensor conditioning because its rail-to-rail input stage accepts signals near the 1.8 V minimum supply limit, while its 730 kHz typical gain-bandwidth product provides useful signal bandwidth. The two amplifiers can condition complementary or sequential sensor channels without requiring separate packages. The ±150 µV maximum input offset voltage supports accurate low-level measurements, although source impedance and input bias current must also be evaluated. For a bridge, thermocouple, or resistive sensor, the dual arrangement can provide gain and filtering, but the final accuracy budget should include sensor noise, resistor tolerance, and amplifier offset.

🔋

Battery-Powered Instrumentation

The MCP6062-E/SN is appropriate for battery-powered instrumentation because it operates from a single supply as low as 1.8 V and consumes 60 µA of quiescent current per amplifier. Rail-to-rail input and output operation improves usable signal range in compact systems where available supply headroom is limited. The dual configuration can implement a two-stage amplifier or instrumentation front end with fewer packages than discrete single-channel solutions. Designers should calculate the complete load-driven supply current rather than relying on quiescent current alone, and should verify that the required output swing remains valid at the minimum battery voltage.

🔧

Precision Active Filters

The MCP6062-E/SN can implement first-order or conventional second-order active filters where the 730 kHz typical gain-bandwidth product provides adequate closed-loop bandwidth. Its unity-gain stability supports follower-based topologies, while rail-to-rail input and output operation is useful when signals occupy much of the available supply range. The dual package allows a filter and an output buffer to share one component. Component tolerances and amplifier offset ultimately determine filter accuracy, so precision resistors and a suitable noise analysis should accompany the nominal gain-bandwidth calculation.

🎧

Audio Preamplifier Stages

The MCP6062-E/SN is suitable for low-to-moderate-frequency audio preamplification where a dual amplifier can provide two gain stages or a differential signal path in one 8-pin SOIC. Rail-to-rail input avoids the restrictions of a fixed common-mode range in low-voltage audio systems, while rail-to-rail output improves swing toward the supply rails. The 730 kHz typical gain-bandwidth product is appropriate for many line-level audio bandwidths, though actual noise, output-current capability, and capacitive-load stability should be checked for the selected topology and source impedance.

🏭

Industrial Feedback Control

The MCP6062-E/SN can serve as the error amplifier and output driver in a low-frequency industrial feedback loop. Its 1.8 V minimum supply supports compact control systems, and the 730 kHz typical gain-bandwidth product is sufficient for many slow plant-control loops. The dual channel allows one amplifier to drive the error path while the second provides sensing or buffering. The extended -40°C to +125°C operating range supports industrial temperature requirements, but stability must be evaluated with the sensor, actuator, compensation network, output load, and control-loop gain rather than bandwidth alone.

💊

Portable Measurement and Diagnostic Equipment

The MCP6062-E/SN fits portable measurement equipment that combines low supply voltage, precision signal capture, and limited board area. Its ±150 µV maximum input offset voltage supports accurate amplification of low-level diagnostic signals, while 60 µA of quiescent current per amplifier limits standby demand. Two integrated channels can provide simultaneous measurements, differential excitation, or gain and filtering stages. For medical and diagnostic-adjacent equipment, the signal path should be reviewed for noise, electromagnetic interference, patient-protection requirements, and separation from hazardous circuits rather than relying on amplifier specifications alone.

Resumen de productos recomendados

MCP6061 Single-channel member of the same low-power precision amplifier family Se usa en: Low-Voltage Sensor Signal Conditioning, Battery-Powered Instrumentation, Precision Active Filters, Audio Preamplifier Stages, Industrial Feedback Control, Portable Measurement and Diagnostic Equipment MCP6064 Four-channel member of the same precision amplifier family Se usa en: Low-Voltage Sensor Signal Conditioning, Battery-Powered Instrumentation, Precision Active Filters, Audio Preamplifier Stages, Industrial Feedback Control, Portable Measurement and Diagnostic Equipment
What is the operating voltage range of MCP6062-E/SN?
The MCP6062-E/SN operates from a single supply as low as 1.8 V and supports supplies up to 6 V. According to the Microchip Technology MCP6062 product information, this range makes the dual amplifier suitable for low-voltage battery-powered, sensor, and precision signal-conditioning circuits. Designers should still verify the output swing at the intended load because rail-to-rail operation describes the output capability without guaranteeing a full supply-rail voltage.
What are the key specifications of MCP6062-E/SN that engineers should know?
The MCP6062-E/SN is a dual, unity-gain-stable operational amplifier with rail-to-rail input and output, a 730 kHz typical gain-bandwidth product, ±150 µV maximum input offset voltage, and 60 µA typical quiescent current per amplifier. The Microchip Technology MCP6062 family information identifies operation down to 1.8 V, while the E temperature designation supports use from -40°C to +125°C in an 8-pin SOIC package.
Is MCP6062-E/SN suitable for low-voltage sensor interfaces?
Yes, the MCP6062-E/SN is suitable for low-voltage sensor interfaces because its rail-to-rail input accepts signals near the supply limits, its supply can start at 1.8 V, and each amplifier draws only 60 µA typical quiescent current. The 730 kHz typical gain-bandwidth product supports low-frequency sensor conditioning, while the ±150 µV maximum offset specification helps preserve accuracy. Check the input bias current and noise requirements against the sensor impedance before finalizing the design.
What can replace MCP6062-E/SN?
The closest identified replacement is the MCP6062T-E/SN, which retains the MCP6062 dual-amplifier electrical configuration and 8-pin SOIC footprint. The principal distinction is its reel-oriented ordering format. Because that difference concerns packaging rather than a functionally distinct competitor, the MCP6062T-E/SN is not listed as a separate engineering alternative. No additional pin-compatible cross-brand replacement could be established without a verified device-level comparison.
Where can I download the MCP6062-E/SN datasheet PDF?
The official MCP6062 product page on Microchip Technology is the preferred location for the MCP6062-E/SN datasheet and supporting documentation. Open the MCP6062 product page, select the MCP6062-E/SN ordering code, and use the datasheet or document links associated with that exact variant. Engineers should check the package drawing and pin description table before assigning PCB tracks because the device uses an 8-pin SOIC outline.
Where can I find the MCP6062-E/SN pinout?
The MCP6062-E/SN pinout is found in the pin-description table and package drawing associated with the Microchip Technology MCP6062 documentation. The device is an 8-pin SOIC containing two operational amplifiers. Use the manufacturer diagram to identify each amplifier's input, output, supply, and ground connections, and follow the recommended land pattern rather than relying on a generic SOIC drawing.
What is the difference between MCP6062-E/SN and MCP6062T-E/SN?
The MCP6062-E/SN and MCP6062T-E/SN belong to the same MCP6062 dual-amplifier family and use the same 8-pin SOIC electrical arrangement. Their ordering codes differ primarily in the packaging format, with MCP6062T-E/SN using a reel-oriented format and MCP6062-E/SN using a tube format. Because this is a packaging distinction rather than an electrical redesign, both require the same PCB footprint and pin assignment.
When should I choose MCP6062-E/SN over a single-channel op amp?
Choose the MCP6062-E/SN when the design needs two matched amplifier channels and can benefit from a single 8-pin SOIC package. It reduces component count and simplifies dual-rail or dual-channel circuit construction. Use separate single-channel devices when channel independence, different packages, or different gain settings require separately sourced amplifiers. The MCP6062-E/SN remains unity-gain stable, so either internal channel can also implement a voltage follower.
Is MCP6062-E/SN suitable for active filters and audio preamplifiers?
Yes, the MCP6062-E/SN is suitable for active filters and low-to-moderate-frequency audio preamplifier stages. Its 730 kHz typical gain-bandwidth product and unity-gain stability permit conventional inverting and noninverting configurations, while the rail-to-rail input and output are helpful in low-voltage systems. The dual package can implement a matched two-stage preamplifier or filter, subject to output-current, noise, and load-capacitance checks.
What are the power and thermal considerations for MCP6062-E/SN?
The MCP6062-E/SN uses approximately 60 µA of quiescent current per amplifier, making its no-load supply demand relatively low. Actual dissipation rises with output current and the voltage difference between the output and supply rails. Because the device is housed in an 8-pin SOIC, copper area and airflow matter when driving resistive loads continuously. Use the manufacturer power-rating and thermal information for worst-case ambient temperature, load current, and supply voltage.
Where can I buy MCP6062-E/SN and check its price and lead time?
Use the Request a Quote form on this page to request MCP6062-E/SN pricing, stock confirmation, and current lead time for the required quantity. The ordering code identifies an 8-pin SOIC device shipped in a tube. Buyers should include the target quantity and required delivery date in the request so the commercial response reflects the correct packaging and schedule.
Is MCP6062-E/SN in stock?
Current inventory and delivery schedules can change, so use the Request a Quote form on this page for a confirmation of MCP6062-E/SN availability. Include the required quantity, tube packaging requirement, destination, and target date. The product is currently offered by multiple authorized channels, but an order confirmation is the appropriate way to validate stock for a specific manufacturing schedule.
What is the price of MCP6062-E/SN?
The current commercial price for MCP6062-E/SN should be requested through the Request a Quote form on this page. The form accounts for the requested quantity and current channel pricing rather than embedding a static quote that could become outdated. For purchasing decisions, provide the exact MPN, desired tube quantity, delivery country, and target date so the returned quotation matches the required order.
What is the lead time for MCP6062-E/SN?
The current lead time for MCP6062-E/SN depends on stock, order quantity, and the requested delivery schedule. Submit the part number and quantity through the Request a Quote form on this page to obtain a current commitment. For production planning, include required arrival dates and any acceptable alternatives for assembly packaging so the supply response accounts for the complete procurement requirement.
Is MCP6062-E/SN the same as MCP6062T-E/SN?
The MCP6062-E/SN and MCP6062T-E/SN are electrically the same MCP6062 dual operational amplifier in an 8-pin SOIC, with the same 730 kHz typical gain-bandwidth product and ±150 µV maximum input offset specification. The principal ordering difference is tube versus reel-oriented packaging. They therefore use the same PCB land pattern and pinout, but the correct shipping format should be selected for the assembly process.

Datos de referencia de ingeniería para MCP6062-E/SN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MCP6062-E/SN for low-voltage precision signal conditioning when two amplifier channels, rail-to-rail input and output, and low 60 µA-per-amplifier quiescent current are important. Its 730 kHz typical gain-bandwidth product is suitable for sensor interfaces, active filters, audio preamplification, and slow feedback-control loops. Select MCP6061 when only one channel is required and minimizing package count matters less than reducing pin count. Select MCP6064 when four channels justify a larger quad package. MCP6062T-E/SN provides the same electrical device in a reel-oriented ordering format for tape-and-reel assembly. Before changing amplifiers, verify the complete footprint, pin assignment, common-mode range, output swing, stability, noise, and operating-temperature requirements.

Comparación con alternativas

Parámetro Este producto
Package 8-pin SOIC, 3.90 mm width
Brand Microchip Technology
Number of Amplifiers 2 channels
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 730 kHz typical
Input Offset Voltage ±150 µV maximum
Quiescent Current 60 µA per amplifier
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Gain Stability Unity-gain stable
Operating Temperature Range -40°C to +125°C
Automotive Qualification AEC-Q100 qualified

Diferenciadores clave

  • Combines two precision amplifiers with low quiescent current (frente a MCP6061)
  • Supports low-voltage operation with rail-to-rail signal handling (frente a MCP6064)
  • Matches the MCP6062 family's precision performance (frente a MCP6062T-E/SN)

Notas de diseño

Do not treat the rail-to-rail designation as a guarantee of exact rail-to-rail output swing. Check the output-voltage-versus-current curves in the manufacturer documentation for the selected supply voltage and load. Also verify that the input source stays within the operating common-mode range at temperature. A source impedance much greater than the amplifier input resistance can create offset error, while capacitive loading can affect stability even though the MCP6062-E/SN is unity-gain stable.

Place the supply bypass capacitor close to the positive and ground pins of the SOIC and keep the return path short to reduce parasitic inductance. Route sensitive input and feedback traces away from digital clocks, switching-regulator nodes, and high-current outputs. If the circuit operates near its gain-bandwidth limit, keep the feedback loop compact and minimize board capacitance around the op-amp inputs. Use the manufacturer land pattern rather than a generic 8-pin SOIC footprint.

Estimated: with each amplifier at 60 µA quiescent current, a 5 V supply and no significant load produce approximately 0.6 mA total supply current and 3 mW total dissipation. Actual current increases according to the output current and the output-to-supply voltage difference. This calculation is an estimate based on the documented 60 µA per amplifier and 5 V operating point; use worst-case load, supply, and temperature conditions for the final power budget.

Select feedback resistors to keep resistor thermal noise and input-bias-current error within the circuit's error budget. High source impedances can magnify input-bias-current effects, while very small feedback resistors can increase output-current demand and capacitive-load risk. For precision filters, include amplifier offset, bias current, resistor tolerance, and bandwidth in the uncertainty analysis. Use short, guarded input traces and provide a nearby ground reference to reduce coupled noise.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The MCP6062-E/SN ordering information identifies the device as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or material declaration.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MCP6062-E/SN datasheet MCP6062-E/SN pinout MCP6062-E/SN datasheet pdf MCP6062-E/SN equivalent MCP6062-E/SN replacement MCP6062-E/SN price MCP6062-E/SN stock MCP6062 dual precision op amp MCP6062 1.8V op amp MCP6062 730kHz amplifier MCP6062-E/SN SOIC-8 MCP6062-E/SN sensor interface MCP6062-E/SN vs MCP6062T-E/SN Microchip MCP6062-E/SN MCP6062 active filter amplifier

Componentes & términos relacionados

Microchip Technology MCP6062-E/SN MCP6061 MCP6062 MCP6064 MCP6062T-E/SN operational amplifier precision amplifier amplifier IC analog IC semiconductor rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage quiescent current unity-gain stable common-mode range SOIC-8 surface-mount package sensor signal conditioning active filter audio preamplifier feedback control AEC-Q100
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ