MKE06Z64VLK4 - 48MHz Cortex-M0+, 64KB Flash | NXP
MPN: MKE06Z64VLK4 ✓ NakahandaMKE06Z64VLK4 Ulas
A microcontroller such as the MKE06Z64VLK4 integrates a CPU, program memory, data memory, clock control, communications peripherals, timers, analog interfaces, and GPIO into one device. The Kinetis KE06 family extends the Kinetis E-series architecture with enhanced ESD and EMC performance. This makes it useful for embedded automation, metering, motor-control, and IoT equipment where an inexpensive 8-bit controller may not provide sufficient performance.
The MKE06Z64VLK4 operates at up to 48MHz and includes 64KB of Flash alongside 8KB of SRAM. Its Kinetis E-series peripheral set provides analog, communication, timing, and control functions for cost-sensitive embedded systems. The manufacturer describes the KE06 family as pin-compatible across the Kinetis E series, which can simplify product revisions when a related member provides equivalent pin configuration and suitable memory and peripheral resources.
The 5V and robust MCU positioning is significant because it supports designs operating from higher-voltage industrial rails while retaining an economical ARM Cortex-M0+ architecture. Its 80-LQFP package exposes substantially more I/O than a small microcontroller package, allowing more external sensors, switches, communications lines, and actuator interfaces to be connected. Pin assignment and multiplexing should always be checked in the manufacturer pin-description table before finalizing a PCB.
Typical uses include industrial control panels, smart meters, building equipment, sensor nodes, motor-control interfaces, and connected products requiring a 32-bit control architecture. The 48MHz Cortex-M0+ core provides more computational headroom than 8-bit designs, while 64KB Flash supports embedded firmware, parameter storage, and moderate protocol stacks. Designers must budget flash and SRAM carefully for networking, diagnostics, and logging features.
For PCB implementation, place decoupling capacitors beside the supply pins, route sensitive analog inputs away from fast digital switching, and maintain the voltage and decoupling requirements stated in the manufacturer datasheet. The exposed 5V tolerance and enhanced EMC behavior do not remove the need for correct grounding, filtering, and enclosure design in electrically noisy installations.
This product page consolidates the verified device identity, package, memory configuration, clock rate, lifecycle information, sourcing path, compatible family members, and practical selection guidance. It also distinguishes verified drop-in candidates from devices that merely perform similar functions, helping engineers make a PCB-compatible replacement decision rather than relying on broad functional equivalence.
Mga alternatibo na pwedeng ilagay na MKE06Z64VLK4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MKE06Z64VLK4 (parehas na form factor at footprint) — pagkakaiba sa Package.
MKE06Z64VLH4
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MKE04Z64VLK4
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MKE06Z64VLK4 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | Kinetis KE06 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| CPU Architecture | ARM Cortex-M0+ |
| Word Size | 32-bit |
| Packhaging | 80-LQFP (14x14 mm) |
| Bilang ng Pin | 80 pins |
| Operating Voltage Class | 5V |
| ESD Performance | Enhanced ESD performance |
| EMC Performance | Enhanced EMC performance |
| Target Environment | High electrical noise environments |
| Application Segments | Industrial control, IoT devices, embedded automation, motor control, metering |
| Peripheral Types | Analog, communication, timing, and control peripherals |
| Temperature Grade | Industrial grade |
| Terminal Form | Gull wing |
| Package Shape | Square |
Gabay sa Pin Configuration ng MKE06Z64VLK4 square
Pin configuration para sa MKE06Z64VLK4 (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MKE06Z64VLK4.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MKE06Z64VLK4 ay nararapat para sa 6 aplikasyons: Industrial Control Panels, Smart Metering, Motor-Control Interface, IoT Sensor Node, Building Automation Equipment, Data Acquisition Module.
Industrial Control Panels
The MKE06Z64VLK4 suits industrial control panels because its 48MHz ARM Cortex-M0+ core provides faster control-loop execution than an 8-bit MCU while the 64KB Flash and 8KB SRAM remain economical for compact embedded designs. The KE06 family is positioned for enhanced ESD and EMC performance in electrically noisy environments. Its 80-LQFP package also exposes enough I/O for switches, indicators, sensors, and communication interfaces. Use filtered inputs and a correctly engineered PCB layout, and verify every supply and I/O voltage against the manufacturer electrical limits.
Inirekomenda
Smart Metering
The MKE06Z64VLK4 can form the control core of a smart meter that combines pulse counting, sensor conditioning, local display support, and communication. Its 48MHz Cortex-M0+ processor provides useful responsiveness for measurement and protocol handling, while 64KB Flash accommodates firmware and calibration tables. The 80-LQFP package offers more I/O than a compact package for external sensing channels. Designers should reserve memory for stack depth, nonvolatile parameters, diagnostics, and future protocol updates before locking the firmware architecture.
Inirekomenda
Motor-Control Interface
The MKE06Z64VLK4 is appropriate for a motor-control interface that handles commands, sensed currents, fault inputs, and communication with a higher-level controller. Its 48MHz Cortex-M0+ core can execute control and protection logic, and the KE06 family’s analog, timing, and control peripherals support embedded signal acquisition. The 80-LQFP package provides access to more I/O than small-outline alternatives. Keep switching devices and high-current paths away from sensitive analog routing, and establish thermal protection independently of the firmware whenever the motor system requires it.
Inirekomenda
IoT Sensor Node
The MKE06Z64VLK4 supports a compact IoT sensor node that acquires analog or digital measurements, applies local filtering, and communicates through a serial interface. Its 48MHz ARM Cortex-M0+ core provides enough throughput for protocol overhead and edge-processing logic without the cost of a higher-tier processor. With 64KB Flash and 8KB SRAM, the device is best suited to focused embedded firmware rather than large local data buffers. Power-loss handling, firmware update strategy, and communication line conditioning should be addressed during hardware design.
Inirekomenda
Building Automation Equipment
MKE06Z64VLK4 fits building-automation controllers that coordinate inputs from occupancy, temperature, and equipment sensors while driving relays or communicating with field modules. The 5V-oriented, robust KE06 family is relevant to environments with electrically noisy wiring and long cable runs. Its 80-LQFP package supports a practical number of field I/O, and the 48MHz Cortex-M0+ core can handle debouncing, state logic, and serial protocols. Add surge protection and appropriate filtering at external interfaces rather than relying on the MCU alone.
Inirekomenda
Data Acquisition Module
The MKE06Z64VLK4 can act as the control and communications processor in a compact data-acquisition module. The 48MHz Cortex-M0+ core can coordinate sampling commands, process sensor outputs, and maintain a communications protocol, while the 64KB Flash stores application firmware and configuration logic. Its 80-LQFP package offers flexible I/O allocation for multiple channels and status signals. Analog accuracy is determined primarily by the sensing chain, so grounding, reference design, shielding, and calibration require dedicated attention rather than reliance on the 32-bit digital controller.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MKE06Z64VLK4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MKE06Z64VLH4 | MKE04Z64VLK4 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (14x14 mm) | 80-LQFP - same family footprint | 80-LQFP (14x14 mm) - same package |
| Product Family | Kinetis KE06 | Kinetis KE06 | Kinetis KE04 |
| CPU Architecture | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Robustness Positioning | 5V/robust MCU with enhanced ESD and EMC performance | KE06 5V/robust MCU family | Kinetis E-series MCU |
| Pin Compatibility | Reference device | KE06-family pin compatible | Kinetis E-series pin compatible; verify exact pin multiplexing |
Pangunahing mga Pagkakaiba
- Dedicated KE06 robustness and 5V positioning (kumpara saMKE04Z64VLK4)
- 48 MHz ARM Cortex-M0+ processing with 64KB Flash (kumpara saMKE06Z64VLH4)
- Same-package replacement path within the Kinetis E series (kumpara saMKE04Z64VLK4)
Talaan ng Disenyo
Use the NXP package drawing and pin-description table to create the 80-LQFP footprint, including pad dimensions, solder-mask clearance, and exposed thermal considerations. Place the required input and bulk decoupling capacitors close to their associated supply pins, with each capacitor return connected to the intended ground plane. Keep the high-current return path compact so switching and transient currents do not share sensitive analog ground routes.
Do not treat family-level pin compatibility as proof that every peripheral and alternate function is identical. Before substituting MKE06Z64VLH4 or MKE04Z64VLK4, compare pin multiplexing, memory mapping, interrupt vectors, clock limits, analog channels, timers, communications blocks, and software-support packages. Preserve the exact MPN in firmware and production documentation until the substitution has passed hardware and software validation.
Route analog sensor inputs away from switching nodes, high-current motor phases, clock signals, and fast serial edges. Use a continuous ground reference beneath analog circuitry where practical, keep input return currents within the same ground region as their source, and add filtering at externally accessible connectors. The KE06 family’s enhanced ESD and EMC performance helps system robustness, but it does not replace correct enclosure grounding and surge protection.
Budget operating current from the power architecture and ensure the 5V-oriented design point matches the actual board rail. Check regulator tolerance, startup behavior, and the maximum allowed voltage at every connected pin, especially on boards that share a connector with unprotected external wiring. Provide local bulk energy for transient loads and avoid routing motor or relay current through the MCU supply path.
Assign communication pins only after checking their 5V tolerance and selected alternate function in the manufacturer pin table. If a peripheral is used for UART, SPI, I2C, or another serial interface, follow the required signal levels and pin multiplexing. For long external cables, use series damping, proper termination, and protection devices rather than increasing drive strength without signal-integrity analysis.
Impormasyon ng Pagsunod sa Kautusan
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the verified product information. The NXP result describes the device as automotive-grade, but that description alone does not establish AEC-Q100 qualification.