NXP Semiconductors

MKE06Z64VLK4 - 48MHz Cortex-M0+, 64KB Flash | NXP

MPN: MKE06Z64VLK4 ✓ פעיל
5V Vdss 80-LQFP (14x14 mm) Package 48 MHz Speed 64 KB (64K x 8) Memory
כמות הזמנה מינימלית: 1 |

MKE06Z64VLK4 סקירה

The NXP Semiconductors MKE06Z64VLK4 is a 48MHz ARM Cortex-M0+ Kinetis KE06 microcontroller with 64KB Flash and 8KB SRAM in an 80-LQFP (14x14) package. It combines a 32-bit RISC core with a 5V-capable, robust mixed-signal design intended for cost-sensitive industrial control and high-electrical-noise environments.

A microcontroller such as the MKE06Z64VLK4 integrates a CPU, program memory, data memory, clock control, communications peripherals, timers, analog interfaces, and GPIO into one device. The Kinetis KE06 family extends the Kinetis E-series architecture with enhanced ESD and EMC performance. This makes it useful for embedded automation, metering, motor-control, and IoT equipment where an inexpensive 8-bit controller may not provide sufficient performance.

The MKE06Z64VLK4 operates at up to 48MHz and includes 64KB of Flash alongside 8KB of SRAM. Its Kinetis E-series peripheral set provides analog, communication, timing, and control functions for cost-sensitive embedded systems. The manufacturer describes the KE06 family as pin-compatible across the Kinetis E series, which can simplify product revisions when a related member provides equivalent pin configuration and suitable memory and peripheral resources.

The 5V and robust MCU positioning is significant because it supports designs operating from higher-voltage industrial rails while retaining an economical ARM Cortex-M0+ architecture. Its 80-LQFP package exposes substantially more I/O than a small microcontroller package, allowing more external sensors, switches, communications lines, and actuator interfaces to be connected. Pin assignment and multiplexing should always be checked in the manufacturer pin-description table before finalizing a PCB.

Typical uses include industrial control panels, smart meters, building equipment, sensor nodes, motor-control interfaces, and connected products requiring a 32-bit control architecture. The 48MHz Cortex-M0+ core provides more computational headroom than 8-bit designs, while 64KB Flash supports embedded firmware, parameter storage, and moderate protocol stacks. Designers must budget flash and SRAM carefully for networking, diagnostics, and logging features.

For PCB implementation, place decoupling capacitors beside the supply pins, route sensitive analog inputs away from fast digital switching, and maintain the voltage and decoupling requirements stated in the manufacturer datasheet. The exposed 5V tolerance and enhanced EMC behavior do not remove the need for correct grounding, filtering, and enclosure design in electrically noisy installations.

This product page consolidates the verified device identity, package, memory configuration, clock rate, lifecycle information, sourcing path, compatible family members, and practical selection guidance. It also distinguishes verified drop-in candidates from devices that merely perform similar functions, helping engineers make a PCB-compatible replacement decision rather than relying on broad functional equivalence.

חלופות תחליף ישיר עבור MKE06Z64VLK4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם MKE06Z64VLK4 (אותו גורם צורה וטביעת רגל) — שונים ב Package.

NXP Semiconductors
Package: 80-LQFP (14 x 14 mm)
השווה עם MKE06Z64VLK4 →

MKE06Z64VLH4

✅ Drop-In
📦 80-LQFP (14x14 mm)
Same 64KB Flash and 80-LQFP footprint; NXP documents KE06-family pin compatibility, with package-temperature ordering details requiring confirmation

📋 חלופה להתייחסות (לא בקטלוג)

MKE04Z64VLK4

✅ Drop-In
NXP Semiconductors
📦 80-LQFP (14x14 mm)
ARM Cortex-M0+ · 32-Bit · 48 MHz · 64 KB (64K x 8) · FLASH · 8 KB · 2.7 V to 5.5 V · 71

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

MKE06Z64VLK4 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family Kinetis KE06
Maximum CPU Frequency 48 MHz
Flash Memory 64 KB (64K x 8)
SRAM 8 KB
CPU Architecture ARM Cortex-M0+
Word Size 32-bit
מארז 80-LQFP (14x14 mm)
מספר פינים 80 pins
Operating Voltage Class 5V
ESD Performance Enhanced ESD performance
EMC Performance Enhanced EMC performance
Target Environment High electrical noise environments
Application Segments Industrial control, IoT devices, embedded automation, motor control, metering
Peripheral Types Analog, communication, timing, and control peripherals
Temperature Grade Industrial grade
Terminal Form Gull wing
Package Shape Square

מדריך תצורת פינים של MKE06Z64VLK4 square

תצורת פינים עבור MKE06Z64VLK4 (מארזת square). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת square עבור MKE06Z64VLK4

אין נתוני פריסת פינים מפורטים עבור MKE06Z64VLK4.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

MKE06Z64VLK4 מתאים עבור 6 יישוםs: Industrial Control Panels, Smart Metering, Motor-Control Interface, IoT Sensor Node, Building Automation Equipment, Data Acquisition Module.

🏭

Industrial Control Panels

The MKE06Z64VLK4 suits industrial control panels because its 48MHz ARM Cortex-M0+ core provides faster control-loop execution than an 8-bit MCU while the 64KB Flash and 8KB SRAM remain economical for compact embedded designs. The KE06 family is positioned for enhanced ESD and EMC performance in electrically noisy environments. Its 80-LQFP package also exposes enough I/O for switches, indicators, sensors, and communication interfaces. Use filtered inputs and a correctly engineered PCB layout, and verify every supply and I/O voltage against the manufacturer electrical limits.

📡

Smart Metering

The MKE06Z64VLK4 can form the control core of a smart meter that combines pulse counting, sensor conditioning, local display support, and communication. Its 48MHz Cortex-M0+ processor provides useful responsiveness for measurement and protocol handling, while 64KB Flash accommodates firmware and calibration tables. The 80-LQFP package offers more I/O than a compact package for external sensing channels. Designers should reserve memory for stack depth, nonvolatile parameters, diagnostics, and future protocol updates before locking the firmware architecture.

⚡

Motor-Control Interface

The MKE06Z64VLK4 is appropriate for a motor-control interface that handles commands, sensed currents, fault inputs, and communication with a higher-level controller. Its 48MHz Cortex-M0+ core can execute control and protection logic, and the KE06 family’s analog, timing, and control peripherals support embedded signal acquisition. The 80-LQFP package provides access to more I/O than small-outline alternatives. Keep switching devices and high-current paths away from sensitive analog routing, and establish thermal protection independently of the firmware whenever the motor system requires it.

🧩

IoT Sensor Node

The MKE06Z64VLK4 supports a compact IoT sensor node that acquires analog or digital measurements, applies local filtering, and communicates through a serial interface. Its 48MHz ARM Cortex-M0+ core provides enough throughput for protocol overhead and edge-processing logic without the cost of a higher-tier processor. With 64KB Flash and 8KB SRAM, the device is best suited to focused embedded firmware rather than large local data buffers. Power-loss handling, firmware update strategy, and communication line conditioning should be addressed during hardware design.

🏠

Building Automation Equipment

MKE06Z64VLK4 fits building-automation controllers that coordinate inputs from occupancy, temperature, and equipment sensors while driving relays or communicating with field modules. The 5V-oriented, robust KE06 family is relevant to environments with electrically noisy wiring and long cable runs. Its 80-LQFP package supports a practical number of field I/O, and the 48MHz Cortex-M0+ core can handle debouncing, state logic, and serial protocols. Add surge protection and appropriate filtering at external interfaces rather than relying on the MCU alone.

📟

Data Acquisition Module

The MKE06Z64VLK4 can act as the control and communications processor in a compact data-acquisition module. The 48MHz Cortex-M0+ core can coordinate sampling commands, process sensor outputs, and maintain a communications protocol, while the 64KB Flash stores application firmware and configuration logic. Its 80-LQFP package offers flexible I/O allocation for multiple channels and status signals. Analog accuracy is determined primarily by the sensing chain, so grounding, reference design, shielding, and calibration require dedicated attention rather than reliance on the 32-bit digital controller.

What is the MKE06Z64VLK4?
The MKE06Z64VLK4 is a 48MHz, 32-bit ARM Cortex-M0+ Kinetis KE06 microcontroller with 64KB Flash and 8KB SRAM. According to the NXP product page, it is a 5V and robust MCU for cost-sensitive, high-reliability applications in electrically noisy environments, and the device is supplied in an 80-LQFP package measuring 14x14 mm.
What is the operating voltage of MKE06Z64VLK4?
The MKE06Z64VLK4 belongs to the 5V Kinetis KE06 family. The 5V designation identifies the family’s voltage-oriented design point, while the exact minimum and maximum supply limits for every I/O and operating mode must be taken from the manufacturer datasheet. Use the pin table to confirm that each connected signal remains within its specified voltage range.
How much memory does MKE06Z64VLK4 have?
The MKE06Z64VLK4 contains 64KB, organized as 64K x 8, of Flash and 8KB of SRAM. The DigiKey product listing identifies the 64KB Flash configuration, while the KE06 family description identifies 8KB SRAM. Firmware, calibration data, and communication stacks must be sized against these limits before production firmware is finalized.
What CPU does the MKE06Z64VLK4 use?
The MKE06Z64VLK4 uses a 32-bit ARM Cortex-M0+ processor operating at up to 48MHz. NXP identifies the part as a Kinetis KE06 ARM Cortex-M0+ microcontroller. The Cortex-M0+ architecture provides a cost-effective 32-bit control platform for embedded products that need more processing capability than an 8-bit MCU without moving to a higher-performance core.
What package does MKE06Z64VLK4 use?
The MKE06Z64VLK4 is packaged in an 80-LQFP measuring 14x14 mm. The verified distributor listing explicitly identifies the 80-LQFP package, and the package description identifies a square gull-wing format with 80 terminals. The manufacturer pin-description table and package drawing should govern footprint, pin numbering, and PCB clearances.
Where can I download the MKE06Z64VLK4 datasheet PDF?
The MKE06Z64VLK4 datasheet is available through the NXP product page linked on this listing, with additional manufacturer-hosted access identified by the official part page. Use the manufacturer PDF for the complete electrical characteristics, 80-pin assignment, memory map, peripheral multiplexing, package dimensions, and recommended application circuit.
Where can I find the MKE06Z64VLK4 pinout?
The MKE06Z64VLK4 pinout is found in the pin-description table and package drawing in the NXP manufacturer datasheet. The device has 80 terminals in the 80-LQFP package, but their electrical names and alternate-function assignments must be read directly from that table. Do not infer pin functions from another Kinetis member without confirming compatibility.
Where to buy MKE06Z64VLK4 online?
The MKE06Z64VLK4 can be requested through the Request a Quote form on this page for current availability, lot conditions, and fulfillment options. The NXP manufacturer part page identifies the exact device, while the linked catalog listings can be used as technical references. Purchase quantities and production scheduling should be confirmed through the quote workflow.
What is the price of MKE06Z64VLK4?
Current MKE06Z64VLK4 pricing is obtained through the Request a Quote form on this page because market conditions and order quantity can change the commercial terms. The structured price information on this page does not guarantee an immediate unit allocation. Submit the required quantity, target date, and packaging preference for a current quotation.
What is the lead time for MKE06Z64VLK4?
The current MKE06Z64VLK4 lead time depends on order quantity and NXP supply status. Request a firm lead time and available date through the Request a Quote form on this page, including your production schedule and annual usage. For scheduled production, provide the requested delivery horizon so the allocation can be evaluated against the build plan.
Is MKE06Z64VLK4 in stock?
Use the Request a Quote form on this page to confirm current MKE06Z64VLK4 stock and allocation. The verified catalog pages confirm the part identity and package but do not establish a guaranteed stock quantity. A quotation response should state the available quantity, delivery schedule, and any minimum-order or lot constraints for the requested configuration.
What is the best drop-in replacement for MKE06Z64VLK4?
MKE06Z64VLH4 is the clearest documented drop-in candidate because NXP describes the KE06 family as pin-compatible and lists this related member as Active. MKE04Z64VLK4 is another same-brand candidate with the same 64KB designation and an 80-LQFP footprint, but firmware, memory, peripherals, and lifecycle requirements must be reviewed before substitution. Pin compatibility alone does not guarantee software compatibility.
Can MKE06Z64VLH4 replace MKE06Z64VLK4?
MKE06Z64VLH4 can be considered a pin-compatible replacement because NXP identifies Kinetis E-series pin compatibility and lists the part as Active. Before replacing MKE06Z64VLK4, compare the exact package dimensions, pin multiplexing, memory configuration, clock limits, peripheral set, and software support. The manufacturer’s pin and device comparison information is the deciding authority.
What can replace MKE06Z64VLK4?
MKE06Z64VLH4 and MKE04Z64VLK4 are the verified same-brand alternatives associated with the KE06 and broader Kinetis E-series compatibility statements. A true drop-in replacement must retain the 80-LQFP footprint, matching pin functions, acceptable memory capacity, and the required peripheral set. Cross-brand Cortex-M0+ devices are not automatically drop-in replacements because package and pin assignments can differ.
MKE06Z64VLK4 vs MKE04Z64VLK4 - which is better for industrial control?
MKE06Z64VLK4 is the better documented choice when you specifically require the Kinetis KE06 family, 48MHz Cortex-M0+ operation, enhanced ESD and EMC performance, and the 5V/robust MCU positioning. MKE04Z64VLK4 may support footprint reuse within the Kinetis E series, but its exact memory map, peripherals, electrical limits, and software compatibility must be verified before it becomes the production choice.
When should I choose MKE06Z64VLK4 over MKE04Z64VLK4?
Choose MKE06Z64VLK4 when the design benefits from the KE06 family’s 48MHz Cortex-M0+ performance, 5V orientation, and enhanced ESD and EMC robustness in high-noise industrial environments. MKE04Z64VLK4 is more appropriate when an existing Kinetis E-series design has been validated with that member and its resources fully meet the application requirements. Validate the exact peripheral and software differences before either choice.
Is there a cross-brand pin-compatible equivalent to MKE06Z64VLK4?
No cross-brand drop-in equivalent can be confirmed from the verified cross-reference results for MKE06Z64VLK4. The available comparison results include an STM32 device and an S08P-family device, but the information does not establish the same 80-LQFP footprint and complete pin-to-pin compatibility. Similar CPU speed or general microcontroller capability is not enough to qualify a drop-in replacement.
What are the key specifications of MKE06Z64VLK4 that engineers should know?
The key specifications are a 48MHz ARM Cortex-M0+ core, 32-bit architecture, 64KB Flash, 8KB SRAM, and an 80-LQFP package measuring 14x14 mm. NXP also positions the KE06 family for 5V operation, cost-sensitive embedded designs, and enhanced ESD and EMC performance in high-electrical-noise environments. These parameters make it relevant to industrial control, IoT, metering, automation, and motor-control interfaces.

נתוני עזר הנדסיים עבור MKE06Z64VLK4 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose MKE06Z64VLK4 for a new 48MHz ARM Cortex-M0+ design that specifically benefits from the KE06 family’s 5V orientation, enhanced ESD and EMC performance, 64KB Flash, 8KB SRAM, and 80-LQFP footprint. It is particularly appropriate for industrial controls, metering, building equipment, motor-control interfaces, and cost-sensitive IoT nodes operating in electrically noisy environments. MKE06Z64VLH4 is the closest documented family alternative for maintaining an 80-LQFP KE06-based platform; confirm ordering details and pin functions before substitution. MKE04Z64VLK4 may support a Kinetis E-series footprint migration because it shares the package and 64KB Flash designation, but it should be selected only after confirming exact peripheral availability, memory organization, clock settings, interrupt layout, and software support. Cross-brand Cortex-M0+ devices are not qualified as drop-in replacements unless a manufacturer explicitly documents the same footprint and every required pin function.

השוואה עם חלופות

פרמטר מוצר זה MKE06Z64VLH4 MKE04Z64VLK4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 80-LQFP (14x14 mm) 80-LQFP - same family footprint 80-LQFP (14x14 mm) - same package
Product Family Kinetis KE06 Kinetis KE06 Kinetis KE04
CPU Architecture ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz
Flash Memory 64 KB 64 KB 64 KB
Robustness Positioning 5V/robust MCU with enhanced ESD and EMC performance KE06 5V/robust MCU family Kinetis E-series MCU
Pin Compatibility Reference device KE06-family pin compatible Kinetis E-series pin compatible; verify exact pin multiplexing

מבדילים עיקריים

  • Dedicated KE06 robustness and 5V positioning (לעומתMKE04Z64VLK4)
  • 48 MHz ARM Cortex-M0+ processing with 64KB Flash (לעומתMKE06Z64VLH4)
  • Same-package replacement path within the Kinetis E series (לעומתMKE04Z64VLK4)

הערות תכנון

Use the NXP package drawing and pin-description table to create the 80-LQFP footprint, including pad dimensions, solder-mask clearance, and exposed thermal considerations. Place the required input and bulk decoupling capacitors close to their associated supply pins, with each capacitor return connected to the intended ground plane. Keep the high-current return path compact so switching and transient currents do not share sensitive analog ground routes.

Do not treat family-level pin compatibility as proof that every peripheral and alternate function is identical. Before substituting MKE06Z64VLH4 or MKE04Z64VLK4, compare pin multiplexing, memory mapping, interrupt vectors, clock limits, analog channels, timers, communications blocks, and software-support packages. Preserve the exact MPN in firmware and production documentation until the substitution has passed hardware and software validation.

Route analog sensor inputs away from switching nodes, high-current motor phases, clock signals, and fast serial edges. Use a continuous ground reference beneath analog circuitry where practical, keep input return currents within the same ground region as their source, and add filtering at externally accessible connectors. The KE06 family’s enhanced ESD and EMC performance helps system robustness, but it does not replace correct enclosure grounding and surge protection.

Budget operating current from the power architecture and ensure the 5V-oriented design point matches the actual board rail. Check regulator tolerance, startup behavior, and the maximum allowed voltage at every connected pin, especially on boards that share a connector with unprotected external wiring. Provide local bulk energy for transient loads and avoid routing motor or relay current through the MCU supply path.

Assign communication pins only after checking their 5V tolerance and selected alternate function in the manufacturer pin table. If a peripheral is used for UART, SPI, I2C, or another serial interface, follow the required signal levels and pin multiplexing. For long external cables, use series damping, proper termination, and protection devices rather than increasing drive strength without signal-integrity analysis.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the verified product information. The NXP result describes the device as automotive-grade, but that description alone does not establish AEC-Q100 qualification.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

MKE06Z64VLK4 datasheet MKE06Z64VLK4 pinout MKE06Z64VLK4 datasheet pdf MKE06Z64VLK4 80-LQFP MKE06Z64VLK4 equivalent MKE06Z64VLK4 replacement MKE06Z64VLK4 cross reference MKE06Z64VLK4 vs MKE04Z64VLK4 NXP MKE06Z64VLK4 MKE06Z64VLK4 price MKE06Z64VLK4 stock 48MHz Cortex-M0+ 64KB Flash 80-LQFP MKE06Z64VLK4 industrial control MKE06Z64VLK4 smart meter what can replace MKE06Z64VLK4

רכיבים ומונחים קשורים

NXP Semiconductors MKE06Z64VLK4 MKE06Z64VLH4 MKE04Z64VLK4 Kinetis KE06 Kinetis KE04 Kinetis E series ARM Cortex-M0+ 32-bit microcontroller RISC microcontroller embedded microcontroller semiconductor 80-LQFP LQFP package family surface-mount package 64KB Flash 8KB SRAM 48MHz clock 5V microcontroller industrial control IoT sensor node smart metering motor control ESD protection performance EMC performance
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר