NXP Semiconductors

MKL24Z64VLH4 - 48MHz Cortex-M0+ 64KB Flash USB 2.0 MCU | NXP

MPN: MKL24Z64VLH4 ✓ Nakahanda
1.71 V to 3.6 V Vdss LQFP-64 (10 x 10 mm) Package 48 MHz Speed 64 KB (64K x 8) Memory
MOQ: 1 |

MKL24Z64VLH4 Ulas

The NXP Semiconductors MKL24Z64VLH4 is an ultra-low-power 32-bit Kinetis KL2 microcontroller built on the Arm Cortex-M0+ core, operating up to 48 MHz with 64 KB of embedded Flash memory (64K x 8 organization), 8 KB of SRAM, and a crystal-less full-speed USB 2.0 device controller, all housed in a 64-LQFP (10 x 10 mm) package. The device runs from a single 1.71 V to 3.6 V supply, so it fits industrial 3.3 V rails, 2.5 V legacy systems, and coin-cell powered portable products from the same design.

A microcontroller (MCU) is a single integrated circuit that bundles a CPU core, program memory, working RAM, and peripherals such as GPIO, timers, and communication controllers on one die. The Kinetis KL2x family hierarchy runs from MCU to 32-bit microcontroller to ultra-low-power Cortex-M0+ device, and the KL2x branch of that family adds a full-speed USB 2.0 On-The-Go (OTG) controller or a crystal-less full-speed USB device controller on top of the Kinetis KL1x feature set, while remaining software compatible with the KL1x, KL3x, and KL4x families and with Kinetis K20 (Cortex-M4) designs for migration.

Key features of this part include 48 MHz Cortex-M0+ execution with a fast interrupt controller, 64 KB of on-chip Flash for firmware, 8 KB of SRAM for buffers and stacks, a 12-bit analog-to-digital converter with 1.71 V to 3.6 V operating span, and on-chip full-speed USB device connectivity that eliminates the need for an external crystal in USB applications. Because the USB controller is crystal-less, the device can enumerate and operate as a USB device directly from an internal trimmed oscillator, reducing bill of materials cost and board area.

Technically, the KL2x architecture balances low active current with fast wake-up behavior, allowing the design to sleep between bursts of USB traffic while the transceiver stays responsive to bus events. The 64-LQFP 10 x 10 mm outline is a deliberately conservative industrial package with long leads, which improves soldering yield and rework convenience compared with fine-pitch packages in volume manufacturing, and the exposed thermal spreader path through the leads keeps junction temperature manageable at 48 MHz.

Typical applications include USB-to-serial and USB-to-Ethernet adapters, low-cost data loggers, HID and dongle peripherals, industrial sensor hubs and battery-powered portable instruments. The 12-bit ADC and multiple timers make it suitable for battery monitor and environmental sensing nodes, while the USB device controller makes it a natural fit for configuration ports on instrumentation.

When designing around this MCU, budget decoupling close to the VDD pins and route the USB D+ and D- differential pair as a short, tightly coupled 90 ohm differential pair on a continuous ground plane. Confirm that your USB host enumerates the crystal-less device at the speed and class you intend, and use the Kinetis KL2x reference designs and SDK examples as the baseline for pin multiplexing and low-power mode entry.

This page consolidates the manufacturer product information with a drop-in alternative matrix, a parameter-by-parameter comparison against other Kinetis KL variants, and practical layout and design notes that go beyond the core datasheet feature list.

Mga alternatibo na pwedeng ilagay na MKL24Z64VLH4 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MKL24Z64VLH4 (parehas na form factor at footprint).

MKL26Z64VLH4

✅ Drop-In
📦 LQFP-64 (10 x 10 mm)
same Kinetis KL2x core, 48 MHz, 64 KB Flash and identical 64-LQFP (10 x 10 mm) footprint; adds GPIO and additional peripherals, with the same 12-bit ADC and USB device controller class

📋 Alternatibo na Reference (hindi sa katalogo)

MKL34Z64VLH4

✅ Drop-In
📦 LQFP-64 (10 x 10 mm)
same 48 MHz Cortex-M0+ core and 64 KB Flash in the identical 64-LQFP (10 x 10 mm) package; changes the USB controller from crystal-less device-only to USB OTG host/device

📋 Alternatibo na Reference (hindi sa katalogo)

MKL36Z64VLH4

✅ Drop-In
📦 LQFP-64 (10 x 10 mm)
same 64 KB Flash class and identical 64-LQFP (10 x 10 mm) footprint, but a faster Cortex-M0+ core clock (72 MHz vs 48 MHz, +50%) and additional peripherals

📋 Alternatibo na Reference (hindi sa katalogo)

MKL13Z64VLH4

✅ Drop-In
NXP Semiconductors
📦 LQFP-64 (10 x 10 mm)
Arm Cortex-M0+ · 32-bit · 48 MHz · 64 KB (64K x 8) · 8 KB · 3 V · 1 · 64-LQFP, 10 x 10 mm

Magkontak para sa presyo

Tingnan ang Datasheet →

MKL25Z64VLH4

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
NXP Semiconductors
📦 LQFP-64 (10 x 10 mm)
32-bit ultra-low-power microcontroller · Kinetis KL2 · Arm Cortex-M0+ · 48 MHz · 64 KB · 8 KB · Full-speed USB · 1.8 V, 2.5 V, or 3.3 V

Magkontak para sa presyo

Tingnan ang Datasheet →

MKL24Z64VLH4 Mga Pinakamataas na Rating at Electrical Characteristics

Device Type 32-bit ARM Cortex-M0+ Microcontroller (Kinetis KL2)
Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory Size 64 KB (64K x 8)
SRAM Size 8 KB
USB Controller Full-speed USB 2.0 device controller, crystal-less
ADC Resolution 12-bit
Supply Voltage na Operasyon 1.71 V to 3.6 V
Package Type LQFP-64 (10 x 10 mm)
Bilang ng Pins 64
Uri ng Pagpapasok Surface Mount
Katayuan ng Lifecycle Active
Core Processor Kinetis KL2x ultra-low-power MCU
Program Memory Type Flash
Width ng Data Bus 32-bit
Oscillator Type Internal, crystal-less USB operation
Packaging Type Tray (T)

Gabay sa Pin Configuration ng MKL24Z64VLH4 lqfp-64 (10 x 10 mm)

Pin configuration para sa MKL24Z64VLH4 (lqfp-64 (10 x 10 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng lqfp-64 (10 x 10 mm) package para sa MKL24Z64VLH4

Wala ng detalyadong pinout data na magagamit para sa MKL24Z64VLH4.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MKL24Z64VLH4 ay nararapat para sa 6 aplikasyons: USB-to-Serial and USB-to-Ethernet Adapters, Battery-Powered Portable Sensor Node, Industrial CAN Gateway and HMI Controller, USB HID Configuration Port on Test and Measurement Equipment, USB Charging and Power-Path Control, Medical and Diagnostic Peripheral Interface Module.

🔌

USB-to-Serial and USB-to-Ethernet Adapters

The MKL24Z64VLH4 suits compact USB adapters because its crystal-less full-speed USB 2.0 device controller removes the need for a 24 MHz crystal and load capacitors, shrinking board area in a dongle-sized enclosure. At 48 MHz Cortex-M0+ with 64 KB Flash and 8 KB SRAM, it has room for a USB stack plus a UART or SPI bridge to an Ethernet controller such as the LAN7500I-ABZJ-TR, or a simple CDC serial profile with no external transceiver. The 64-LQFP (10 x 10 mm) package keeps soldering and rework straightforward in volume production, and the 1.71 V to 3.6 V supply range tolerates both 3.3 V and 2.5 V bus-powered designs. The trade-off is single full-speed operation: for high-speed dual-role host designs, move up to a USB OTG variant.

🧩

Battery-Powered Portable Sensor Node

With a 48 MHz Cortex-M0+ core and an ultra-low-power Kinetis KL2 architecture, the MKL24Z64VLH4 fits coin-cell and Li-ion powered environmental sensing nodes where average current dominates battery life. The 12-bit ADC with a 1.71 V to 3.6 V operating span reads battery voltage directly, while 64 KB of Flash holds a small embedded firmware image and 8 KB of SRAM is enough for a sampling window and a small data buffer. Because USB can be used as a configuration or data-download port rather than a continuous power source, the crystal-less device controller keeps charging dongles simple. Watch the core clock budget: if periodic sampling accuracy must be tight, run the timers from an external crystal and keep USB on the internal reference.

🏭

Industrial CAN Gateway and HMI Controller

The MKL24Z64VLH4 works as the supervisory controller in an industrial CAN gateway or compact HMI because the 64 KB Flash and 8 KB SRAM are adequate for protocol translation while the 48 MHz Cortex-M0+ core gives deterministic response for the CAN message filtering and the serial link. Pair it with a CAN transceiver such as the TJA1057GTK/3Z and an RS-232 or RS-485 front end such as the MAX3221IPWR for legacy equipment. The wide 1.71 V to 3.6 V supply range is useful in 24 V industrial systems where a local regulator cleans up the rail, and the 64-LQFP outline is robust for through-hole-adjacent assembly. Confirm the ambient temperature grade and isolation requirements against the enclosure temperature before volume release.

🖥️

USB HID Configuration Port on Test and Measurement Equipment

Instrumentation makers often add a USB HID or CDC configuration port for calibration and firmware updates, and the MKL24Z64VLH4 provides it without a crystal. A 64 KB Flash image can hold a USB HID bootloader plus the instrument control logic, while the 12-bit ADC and multiple timers support front-panel measurement channels. The device runs from 1.71 V to 3.6 V, so it can be powered from the same 3.3 V analog rail region as the rest of the instrument. Because the USB transceiver is crystal-less, temperature drift shows up as small enumeration timing variations, which is acceptable for HID but should be verified if the design relies on USB clock recovery for precision timing. Use the Kinetis SDK HID examples as the starting point for the enumeration descriptors.

⚡

USB Charging and Power-Path Control

In a USB-powered charger or power-path module, the MKL24Z64VLH4 handles enumeration, current-limit negotiation, and status reporting over the full-speed USB device port while supervising the battery and load currents. The 12-bit ADC reads the supply and battery rails inside the 1.71 V to 3.6 V window, and 8 KB of SRAM is sufficient for a small state machine plus logging buffer. The device draws minimal active current when the host stops negotiating, which helps satisfy bus-powered efficiency requirements. Keep in mind the USB device controller here is crystal-less, so any precision current measurement should be referenced to an external reference rather than the internal USB clock source.

💊

Medical and Diagnostic Peripheral Interface Module

The MKL24Z64VLH4 fits as the interface MCU in a compact diagnostic peripheral, handling a full-speed USB connection to a host PC, a UART link to a sensor front end, and housekeeping GPIO for indicators. The 48 MHz Cortex-M0+ core executes the USB stack alongside acquisition housekeeping, while 64 KB of Flash and 8 KB of SRAM cover a CDC or HID profile with room for a calibration table. The 64-LQFP (10 x 10 mm) package and the single 1.71 V to 3.6 V rail simplify certification-focused board layouts where a smaller fine-pitch package would complicate inspection. For designs requiring a reinforced isolation barrier to the host, add a dedicated isolator and keep the USB lines on the protected side of it.

What is the MKL24Z64VLH4 and what does it do?
The MKL24Z64VLH4 is an NXP Kinetis KL2 ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core running up to 48 MHz, 64 KB of Flash, 8 KB of SRAM, and a crystal-less full-speed USB 2.0 device controller. It is packaged in a 64-LQFP (10 x 10 mm) outline and operates from a single 1.71 V to 3.6 V supply. The USB device controller lets the MCU connect directly as a USB peripheral without an external crystal, which lowers board area and bill of materials cost for dongles, adapters, and low-power portable instruments.
What is the operating voltage of MKL24Z64VLH4?
The MKL24Z64VLH4 operates from 1.71 V to 3.6 V, as listed on the NXP product information page and in the LCSC product listing for this part. That range covers a single-cell Li-ion or coin-cell rail, 2.5 V legacy industrial rails, and 3.3 V system rails, which means one MCU family can serve portable, industrial, and consumer products. Below 1.71 V the device is outside its specified operating envelope, so verify the lowest rail in your design against 1.71 V before committing to this part.
How much Flash and SRAM does the MKL24Z64VLH4 have?
The MKL24Z64VLH4 provides 64 KB of Flash program memory, organized as 64K x 8, together with 8 KB of SRAM. The DigiKey listing describes the part as a 32-bit, 48 MHz Cortex-M0+ Kinetis KL2 microcontroller with 64 KB (64K x 8) Flash, and the Kinetis KL24 family documentation confirms 64 KB Flash with 8 KB SRAM. 64 KB of Flash is enough for USB CDC or HID class firmware with a USB stack, a bootloader, and application logic in a single image.
Does the MKL24Z64VLH4 need an external crystal for USB?
No. The MKL24Z64VLH4 integrates a crystal-less full-speed USB 2.0 device controller, which is one of the defining features of the Kinetis KL2x family relative to the earlier KL1x parts. The USB transceiver is trimmed internally so it can lock to the USB bus without a 24 MHz crystal and external load capacitors. The trade-off is that crystal-less operation depends on internal oscillator accuracy and temperature drift, so if your design needs precise long-term timing, use the MCU timers with an external crystal for the core clock and keep USB on the internal reference.
Where can I find the MKL24Z64VLH4 datasheet and pinout?
The official MKL24Z64VLH4 product page on nxp.com links the Kinetis KL24 datasheet, and the Kinetis KL24 family document describes the 64-LQFP (10 x 10 mm) pin assignment for this variant. The pin names, multiplexing options, and the 64-LQFP land pattern are printed in the pin connection tables and package drawings of that document. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and when configuring the Kinetis FlexPin multiplexing registers.
What is the difference between MKL24Z64VLH4 and MKL26Z64VLH4?
Both parts share the same Kinetis KL2x core, 48 MHz Cortex-M0+ performance, 64 KB Flash, and 64-LQFP (10 x 10 mm) package, but the KL26 adds more GPIO and general-purpose peripherals for larger I/O designs, while the KL24 is optimized for applications with more USB device connectivity. The Utmel comparison page for MKL26Z64VLH4 versus MKL24Z64VLH4 outlines the feature deltas. Because the package and pin arrangement are identical, the KL26 is a natural drop-in upgrade when a design runs out of I/O pins.
MKL24Z64VLH4 vs MKL34Z64VLH4 - which one should I choose?
Choose the MKL24Z64VLH4 when you need a crystal-less full-speed USB device controller at the lowest complexity, and choose the MKL34Z64VLH4 when you need USB On-The-Go (OTG) host or device capability for a product that must also act as a USB host. The Utmel comparison page contrasts the two 64 KB, 48 MHz Cortex-M0+ parts in detail. Both are available in the same 64-LQFP (10 x 10 mm) footprint, so the decision is mainly about host-versus-device USB role and peripheral count, not board layout.
MKL24Z64VLH4 vs MKL36Z64VLH4 - which is better for a high-performance application?
The MKL36Z64VLH4 is the right choice for compute-heavy applications because it runs the Cortex-M0+ core faster and adds larger memory options, while the MKL24Z64VLH4 is the better fit for cost-sensitive, USB-device-focused designs. The Utmel comparison of MKL36Z64VLH4, MKL24Z64VLH4, and MKL26Z64VLH4 covers the memory and clock differences. Both parts share the 64-LQFP (10 x 10 mm) package, so upgrading for core speed does not require a PCB change.
What is the best drop-in replacement for the MKL24Z64VLH4?
The closest drop-in replacements are the other Kinetis KL2x members in the same 64-LQFP (10 x 10 mm) outline: MKL26Z64VLH4 for more GPIO, MKL34Z64VLH4 for USB OTG, and MKL25Z64VLH4 for the non-USB variant. NXP positions the KL2x family as compatible with the KL1x, KL3x, and KL4x families, providing a migration path for firmware reuse. Verify pin multiplexing, USB functionality, and flash/RAM size in the replacement datasheet before committing to a second source.
Can I use the MKL13Z64VLH4 instead of the MKL24Z64VLH4?
The MKL13Z64VLH4 is a close functional match: same 64 KB Flash class, 48 MHz Cortex-M0+ core, and the same 64-LQFP (10 x 10 mm) package, which is why it appears in the DigiKey cross-reference listings for this part. The key difference is USB: the KL2x-based MKL24 includes a full-speed USB device controller, while the KL13 does not, so a USB application cannot be migrated to the MKL13 without adding external USB hardware. Confirm the specific pin multiplexing differences before substitution.
Where can I buy the MKL24Z64VLH4 and what is the price?
The MKL24Z64VLH4 is listed as an active part by NXP Semiconductors and is stocked by several authorized distributors, with the LCSC listing showing unit pricing from roughly 2.69 USD and Heisener listing around 6.53 USD per unit at the time of checking. Pricing and stock move daily, so use the Request a Quote form on this page for current unit price, minimum order quantity, and lead time for the 64-LQFP tray packing you need.
What is the lead time and availability for MKL24Z64VLH4?
The part is available for immediate shipment from authorized distributors, with Heisener showing roughly 4,432 pieces in stock and an estimated delivery window of a few days from its warehouse, and the LCSC listing showing the device in stock. The manufacturer lists the MKL24Z64VLH4 as active. For the current lead time, stock level, and minimum order quantity for your chosen packing code, submit a request through the Request a Quote form on this page.
Is the MKL24Z64VLH4 suitable for industrial and consumer USB products?
Yes. The MKL24Z64VLH4 is a general-purpose Kinetis KL2 part with a wide 1.71 V to 3.6 V supply range and an industrial-friendly 64-LQFP package, making it suitable for USB dongles, serial adapters, instrumentation configuration ports, and low-power sensor nodes in both industrial and consumer products. For designs that must meet AEC-Q100 automotive qualification, choose an automotive-qualified Kinetis variant instead, and confirm RoHS and REACH declarations with the manufacturer for your shipping region.
What are the key specifications of MKL24Z64VLH4 that engineers should know?
The MKL24Z64VLH4 is a 32-bit Arm Cortex-M0+ microcontroller at 48 MHz with 64 KB Flash, 8 KB SRAM, a 12-bit ADC, a crystal-less full-speed USB 2.0 device controller, and a 1.71 V to 3.6 V operating range in a 64-LQFP (10 x 10 mm) package. The USB device controller, 12-bit converter, and wide supply span are the parameters that most often decide part selection, while the 64 KB Flash budget dictates how much bootloader and application code can coexist on the single image. The 10 x 10 mm LQFP body keeps soldering and rework simple in volume manufacturing.
What can replace the MKL24Z64VLH4 in an existing design?
The MKL26Z64VLH4 is the most direct substitute, sharing the 64 KB Flash, 48 MHz Cortex-M0+ core, and the identical 64-LQFP (10 x 10 mm) footprint while adding GPIO and peripherals, and the MKL34Z64VLH4 is the substitute when your design needs USB OTG host capability. For a design that only used USB in device mode and does not need the extra USB host hardware, the KL25 and KL13 variants in the same package can also serve. All of these options require a firmware check of the pin multiplexing and USB stack configuration.
How should I lay out the USB and power connections for the MKL24Z64VLH4?
Route the USB D+ and D- differential pair as a short, tightly coupled pair with a 90 ohm differential impedance over a continuous ground plane, keep the pair away from antenna-like copper and switching nodes, and place the bulk and high-frequency decoupling capacitors as close as possible to the VDD and VSS pins of the 64-LQFP footprint. Because the USB controller is crystal-less, no 24 MHz crystal footprint is needed, but the internal reference still needs clean supply to enumerate reliably. Keep the differential pair length matched and check the USB impedance against your stack-up in the layout.

Impormasyon ng Talumpati sa Engineering for MKL24Z64VLH4 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the MKL24Z64VLH4 when your product is a USB device that needs full-speed USB 2.0 with the fewest external components, in a 1.71 V to 3.6 V supply design that must fit a 64 KB Flash and 8 KB SRAM budget, and where a 64-LQFP (10 x 10 mm) package suits your manufacturing flow. Move up to the MKL26Z64VLH4 when you exhaust the available GPIO or need more peripherals, and move up to the MKL34Z64VLH4 or MKL36Z64VLH4 when the design must act as a USB host (OTG) or needs a faster 72 MHz core; both keep the same footprint, so they are drop-in upgrades. Choose the MKL25Z64VLH4 or MKL13Z64VLH4 only when USB is not required and you want to trim cost. The main trade-off across this family is USB role versus cost: the KL24 gives you the crystal-less device controller at the lowest complexity, and every step up trades additional capability or clock speed for a higher device cost and a slightly different low-power profile.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MKL26Z64VLH4 MKL34Z64VLH4 MKL36Z64VLH4 MKL13Z64VLH4 MKL25Z64VLH4
Package LQFP-64 (10 x 10 mm) LQFP-64 (10 x 10 mm) - same LQFP-64 (10 x 10 mm) - same LQFP-64 (10 x 10 mm) - same LQFP-64 (10 x 10 mm) - same LQFP-64 (10 x 10 mm) - same
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Core Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+ Arm Cortex-M0+
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 72 MHz 48 MHz 48 MHz
Flash Memory 64 KB (64K x 8) 64 KB 64 KB 64 KB 64 KB 64 KB
SRAM 8 KB 8 KB 8 KB 8 KB 8 KB 8 KB
USB Support Crystal-less full-speed USB 2.0 device controller USB device controller USB 2.0 OTG host/device USB 2.0 OTG host/device No USB controller No USB controller
ADC Resolution 12-bit 12-bit 12-bit 12-bit 12-bit 12-bit
Operating Supply Voltage 1.71 V to 3.6 V 1.71 V to 3.6 V 1.71 V to 3.6 V 1.71 V to 3.6 V 1.71 V to 3.6 V 1.71 V to 3.6 V
GPIO / Peripheral Count Kinetis KL2 baseline Higher GPIO and peripheral count Higher GPIO with OTG host capability Higher GPIO with faster core Fewer USB-specific peripherals Fewer GPIO than KL24

Pangunahing mga Pagkakaiba

  • Crystal-less full-speed USB 2.0 device controller reduces external component count (kumpara saMKL13Z64VLH4)
  • Broad supply range allows one MCU across portable and industrial rails (kumpara saMKL25Z64VLH4)
  • Direct USB OTG upgrade path without a PCB change (kumpara saMKL34Z64VLH4)
  • Core headroom for compute-heavy firmware (kumpara saMKL36Z64VLH4)

Talaan ng Disenyo

Keep the USB D+ and D- pair as a short, length-matched differential pair with 90 ohm differential impedance over a continuous ground plane, and keep the pair clear of switching nodes, antenna-like copper, and the crystal-less internal oscillator keep-out region. Place the bulk supply capacitor and a 100 nF high-frequency capacitor on the VDD pins of the 64-LQFP (10 x 10 mm) package as close as physically possible, and provide a short ground return for each decoupling capacitor. Verify the USB trace impedance against the actual stack-up rather than relying on nominal width values.

Decide early whether USB is a power source or a data path. If the MKL24Z64VLH4 is bus-powered, budget the total system current against the USB enumeration budget and keep the crystal-less USB controller enabled only while the host is connected, since a permanently active USB PHY consumes current in battery designs. If the device is self-powered, use a dedicated current-sense path such as an INA240A1PW output into the 12-bit ADC so port current can be limited and reported rather than inferred.

The most common mistakes with this part are firmware-level rather than electrical: assuming a 24 MHz crystal footprint is needed, and assuming the USB peripheral in the KL2x behaves exactly like the OTG variant. Because the MKL24Z64VLH4 uses a crystal-less full-speed USB device controller, host-side enumeration descriptors and bus timing must be validated on real hardware, and any design needing USB host or OTG role must move to the KL34 or KL36 variant. Always confirm the pin multiplexing table for the exact 64-LQFP variant before committing the layout.

Estimated: with a 48 MHz Cortex-M0+ core, a 3.3 V supply, and a 15 mA active current draw, the internal dissipation is roughly 3.3 V x 0.015 A = 0.05 W, which is negligible for the 64-LQFP (10 x 10 mm) outline and needs no dedicated heat sinking. Real thermal risk appears only if the surrounding board runs hot or if the part is used at elevated ambient temperature; keep the exposed ground pad area of the LQFP free of thermal isolation and maintain copper for heat spreading on the board.

Flash and SRAM budgeting mistakes surface late in firmware development. A 64 KB image must hold the bootloader, the USB stack, and application logic simultaneously, so plan for a linker script that reserves the bootloader region and use the Kinetis SDK flash programming utilities for field updates over USB. With only 8 KB of SRAM, large USB receive buffers or display framebuffers will not fit; use DMA-capable peripherals or external memory instead of inflating the RAM footprint.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer lists the MKL24Z64VLH4 as an active part with an environmental quality section and shipping information on the NXP product page; specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not reproduced in the product listings, so they are recorded as unknown. This is a general-purpose Kinetis KL2 part and is not marketed as an AEC-Q100 automotive-qualified device.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MKL24Z64VLH4 MKL24Z64VLH4 datasheet MKL24Z64VLH4 datasheet pdf MKL24Z64VLH4 pinout MKL24Z64VLH4 price MKL24Z64VLH4 stock NXP MKL24Z64VLH4 MKL24Z64VLH4 LQFP-64 pinout MKL24Z64VLH4 equivalent MKL24Z64VLH4 drop-in replacement MKL24Z64VLH4 vs MKL26Z64VLH4 MKL24Z64VLH4 vs MKL34Z64VLH4 Kinetis KL24 48MHz Cortex-M0+ 64KB flash USB MCU MKL24Z64VLH4 application circuit MKL24Z64VLH4 lead time

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MKL24Z64VLH4 MKL26Z64VLH4 MKL34Z64VLH4 MKL36Z64VLH4 MKL25Z64VLH4 MKL13Z64VLH4 Arm Cortex-M0+ Kinetis KL2x Kinetis KL24 microcontroller MCU 32-bit microcontroller ultra-low-power MCU USB 2.0 device controller USB OTG crystal-less USB LQFP-64 surface mount package flash memory SRAM 12-bit ADC 1.71 V to 3.6 V operating range industrial control USB dongle
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ