MPC5554AZP132 - 32-Bit 132MHz Power MCU, 2MB Flash, 416-PBGA | NXP
MPN: MPC5554AZP132 ✗ Tapus ng BuhayMPC5554AZP132 Ulas
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and a rich set of peripherals (timers, ADCs, communication controllers) on one silicon die. The MPC5554AZP132 belongs to the broader product type hierarchy of: microcontroller -> embedded MCU -> 32-bit MCU -> automotive-grade MCU -> power-architecture MCU -> Qorivva MPC55xx family. Its Power Architecture e200z6 core provides deterministic interrupt response critical for engine control and chassis systems, while the large 2 MB Flash allows entire powertrain control strategies to reside on-chip.
Key features highlighted in the NXP datasheet include 132 MHz core frequency, 2 MB (2M x 8) program Flash, the 416-pin PBGA package with 27x27 mm body and 1 mm ball pitch (MS-034AAL-1, TEPBGA-416), and the Qorivva family integration of multiple communication peripherals (FlexCAN, eMIOS, eQADC) for sensor and actuator interfacing. The part ships lead-free and supports industrial and automotive temperature ranges per the manufacturer datasheet.
The MPC5554 architecture pairs the e200z6 superscalar core with a variable-length encoding (VLE) instruction set, helping reduce code footprint and improving cache efficiency. The integrated peripheral set (multiple FlexCAN modules, enhanced queued analog-to-digital converters, eMIOS timer units, and DSPI channels) lets a single MPC5554 replace several smaller MCUs in a powertrain ECU.
Typical applications include automotive engine management ECUs, transmission control modules, body controllers, industrial servo drives, and any real-time control loop demanding deterministic execution. The wide peripheral integration and large Flash also suit heavy-duty vehicle hybrid control and aerospace-grade actuator management.
When designing with the MPC5554AZP132, ensure PCB layout accounts for the 1 mm BGA pitch - escape routing requires microvia or laser-drilled via technology. Decoupling must follow the manufacturer reference manual recommendations; failure to provide sufficient bulk and high-frequency capacitance causes supply-noise-induced ADC inaccuracy.
This page synthesizes distributor pricing, drop-in replacement options, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers evaluate the MPC5554AZP132 against current Qorivva alternatives.
Mga alternatibo na pwedeng ilagay na MPC5554AZP132 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MPC5554AZP132 (parehas na form factor at footprint) — pagkakaiba sa Package, RoHS Status, Mounting Type.
MPC5554MVR132
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC5554MVR80
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →MPC5554AZP80
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC5553AZP132
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC5554BZP132
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC5554AZP132 Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | Power Architecture e200z6 |
| Core Bit Width | 32-bit |
| Maximum Core Frequency | 132 MHz |
| Program Memory (Flash) | 2 MB (2M x 8) |
| Packhaging | 416-PBGA (TEPBGA-416), 27 x 27 mm |
| Ball Pitch | 1.0 mm |
| Uri ng Pagpapasok | Surface Mount (BGA) |
| Lead-Free Status | Lead free (per package marking MS-034AAL-1) |
| Product Family | Qorivva MPC55xx |
| Lifecycle Stage | NRND (Not Recommended for New Designs) |
| Peripheral Integration | FlexCAN, eMIOS, eQADC, DSPI (per datasheet reference manual) |
| Instruction Set | Power Architecture with VLE extension |
| Tindminan RoHS | Compliant (lead-free PBGA) |
Gabay sa Pin Configuration ng MPC5554AZP132 416-pbga (tepbga-416), 27 x 27 mm
Pin configuration para sa MPC5554AZP132 (416-pbga (tepbga-416), 27 x 27 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC5554AZP132.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC5554AZP132 ay nararapat para sa 6 aplikasyons: Automotive Engine Management ECU, Transmission Control Module, Industrial Servo and Motor Drive, Body and Chassis Domain Controller, Aerospace Actuator Management, Hybrid and Electric Vehicle Power Electronics.
Automotive Engine Management ECU
The NXP MPC5554AZP132 was specifically designed for engine management ECUs, where its 132 MHz e200z6 core and 2 MB Flash provide enough headroom for full powertrain control algorithms. The integrated FlexCAN modules interface with body and chassis networks, while the eQADC handles crank and cam position sensors with deterministic sampling. According to the NXP product page, the part delivers up to five times the performance of legacy MPC500 devices, making it ideal for stratified-charge and hybrid powertrain strategies where loop time budgets are tight. The 416-PBGA package also gives automotive Tier-1 suppliers enough peripheral pins for multi-injector drive and oxygen-sensor conditioning.
Inirekomenda
Transmission Control Module
Transmission control modules (TCMs) require deterministic real-time response and reliable CAN communication, both delivered by the MPC5554AZP132. The e200z6 core runs shift scheduling algorithms at 132 MHz, while the integrated FlexCAN interfaces with the engine ECU and the rest of the vehicle network. The 2 MB Flash stores calibration tables, transmission maps, and diagnostic routines. The eMIOS timer units synchronize shift solenoids and the eQADC samples line pressure and gear-position sensors. Engineers building 6-10 speed automatic or DCT controllers will find the peripheral mix and pin count well matched to TCM I/O requirements.
Inirekomenda
Industrial Servo and Motor Drive
Outside automotive, the MPC5554AZP132 suits industrial servo drives and heavy-equipment motor controllers that benefit from the e200z6's deterministic interrupt response. With 132 MHz core speed and 2 MB Flash, the MCU can execute field-oriented control (FOC) loops at sub-10 kHz PWM frequencies while leaving bandwidth for EtherCAT or CANopen stacks on the FlexCAN peripherals. The 416-BGA package provides enough I/O for multi-axis quadrature encoder inputs and resolver excitation. According to the NXP datasheet, the part supports industrial temperature ranges and is designed for harsh electrical environments typical of factory automation.
Inirekomenda
Body and Chassis Domain Controller
Body controllers integrate lighting, HVAC, and chassis subsystems into one ECU; the MPC5554AZP132 has the Flash, peripheral mix, and CAN bandwidth to consolidate multiple smaller MCUs. Its 2 MB Flash holds VIN-specific calibration and OTA-capable firmware. The integrated FlexCAN modules bridge to powertrain and chassis CAN buses, while the DSPI peripherals drive LED matrix controllers. Designers appreciate the deterministic interrupt latency of the e200z6 core for safety-relevant features such as electronic stability control pre-processing. The 416-BGA package gives enough pinout for body-controller I/O without external bus expanders.
Inirekomenda
Aerospace Actuator Management
Aerospace actuator control units (ACUs) benefit from the MPC5554AZP132's real-time deterministic core and large Flash for flight-control law storage. The e200z6 core executes redundant control loops, while the eQADC samples redundant position feedback from LVDTs and RVDTs. The 416-PBGA package supports the high pin count needed for multi-channel actuator drive feedback. While the part is automotive-grade, the same architecture is reused in aerospace applications requiring deterministic interrupt response. Designers should verify radiation tolerance and certification against DO-178/DO-254 requirements before deployment.
Inirekomenda
Hybrid and Electric Vehicle Power Electronics
Hybrid and battery-electric vehicles need MCUs that can manage inverter switching at high PWM rates while executing supervisory state machines. The MPC5554AZP132's 132 MHz e200z6 core runs motor-control algorithms and CAN diagnostics simultaneously, while the 2 MB Flash stores lookup tables and fault logs. The eMIOS timer units generate complementary PWM with dead-time insertion, and the eQADC samples DC-link current and phase voltages. The 416-BGA package provides enough I/O for inverter gate-driver interfaces and isolated CAN transceivers. Engineers targeting ISO 26262 ASIL-C/D systems will find the deterministic core a strong starting point.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC5554AZP132 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC5554MVR132 | MPC5554MVR80 | MPC5554AZP80 | MPC5553AZP132 | MPC5554BZP132 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 416-PBGA (TEPBGA-416, 27x27 mm, 1 mm pitch) | 416-PBGA - same | 416-PBGA - same | 416-PBGA - same | 416-PBGA - same | 416-PBGA - same |
| Core Architecture | Power Architecture e200z6 | e200z6 | e200z6 | e200z6 | e200z6 | e200z6 |
| Core Frequency | 132 MHz | 132 MHz | 80 MHz (-39%) | 80 MHz (-39%) | 132 MHz | 132 MHz |
| Program Flash | 2 MB (2M x 8) | 2 MB | 2 MB | 2 MB | 1.5 MB (-25%) | 2 MB |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
| Tray/Packaging Suffix | AZP132 | MVR132 (alternate tray code) | MVR80 (80 MHz bin) | AZP80 (80 MHz bin) | AZP132 (Flash reduced) | BZP132 (alternate tray code) |
| Pin/Ball Count | 416 | 416 | 416 | 416 | 416 | 416 |
Pangunahing mga Pagkakaiba
- Highest-speed 132 MHz e200z6 bin in the MPC5554 family (kumpara saMPC5554MVR80)
- Larger 2 MB Flash vs sibling MPC5553 (kumpara saMPC5553AZP132)
- Same 416-BGA package as AZP132 variants (kumpara saMPC5554BZP132)
Talaan ng Disenyo
The 416-PBGA package uses a 1 mm ball pitch on a 27 x 27 mm body, which requires microvia or laser-drilled via technology for escape routing. Use a 4-6 layer PCB stack-up with the top layer dedicated to fan-out and a dedicated ground plane one layer below to control impedance and reduce crosstalk. NXP recommends thermal via arrays directly under the package center balls to provide a low-impedance path to the inner ground plane; without these vias, junction temperature can rise 15-20 C above datasheet figures.
Decoupling the MPC5554AZP132 requires both bulk and high-frequency capacitance placed as close as possible to each supply pin group (VDD, VDDA, VDDPLL). A typical reference design uses 10 uF bulk tantalum or ceramic plus 100 nF X7R per supply cluster; the PLL supply pin in particular needs a ferrite bead and 10 nF to prevent jitter from coupling into the e200z6 core clock. Per the manufacturer reference manual, insufficient decoupling manifests as ADC inaccuracy and CAN bus error frames under dynamic loads.
Do not assume all MPC5554 family parts are bit-identical at the silicon level - the Flash size differs between MPC5553 (typically 1.5 MB) and MPC5554 (2 MB), and the speed bin (80 vs 132 MHz) changes the maximum core frequency. Always verify the part marking against the NXP datasheet ordering table before PCBA. Also, the NRND lifecycle status means NXP will not accept new designs; engineers should plan a migration to a current Qorivva successor before committing to long-life production.
Impormasyon ng Pagsunod sa Kautusan
Lead-free PBGA per package marking MS-034AAL-1; AEC-Q100 status not confirmed in provided web data. NRND per NXP product page.
