MPC8548PXAUJC557 - PowerQUICC III 1.333GHz e500 MPU | NXP
MPN: MPC8548PXAUJC557 ✓ NakahandaMPC8548PXAUJC557 Ulas
A microprocessor (MPU) is a single-chip CPU that integrates the arithmetic logic unit, control unit, registers, cache, and often on-chip peripherals into one silicon die. MPU architecture follows the von Neumann or Harvard model and sits at the top of the embedded processing hierarchy: microcontroller -> microprocessor -> SoC high-end systems. The e500 core is a Power Book E embedded implementation, optimized for deterministic interrupt response and low-latency networking.
Key features of the MPC8548PXAUJC557 include the e500 core with integrated L1/L2 caches, a 64-bit DDR2 memory controller, dual x1/x2/x4/x8 PCI Express controllers, multiple Gigabit Ethernet MACs, RapidIO interconnect, and an integrated security engine. The 783-ball FCPBGA package provides the high pin density required for parallel memory, multiple high-speed serial links, and extensive general-purpose I/O.
The architecture combines the e500 superscalar core with a coherent core complex bus and a high-bandwidth system bus that feeds the platform peripherals. An integrated security block accelerates IPSec, SSL/TLS, and bulk data encryption, while dedicated DMA engines offload packet movement from the core.
Typical applications include enterprise routers and switches, secure VPN gateways, industrial control and automation platforms, line cards for multi-service switches, and telecom base station controllers. The wide peripheral mix and security acceleration make it especially attractive for L2/L3 managed switches and edge routers.
A key design consideration for the 783-FCPBGA is PCB layout: the package demands a high-layer-count board (typically 8 or more layers) with controlled-impedance routing for DDR2, SERDES, and PCI Express signals, plus a solid thermal via array beneath the exposed die region.
This page synthesizes verified distributor pricing, same-family drop-in alternatives, and PCB-layout considerations that go beyond the manufacturer datasheet, helping hardware engineers accelerate design-in and qualification for the MPC8548PXAUJC557.
Mga alternatibo na pwedeng ilagay na MPC8548PXAUJC557 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok MPC8548PXAUJC557 (parehas na form factor at footprint) — pagkakaiba sa Core Architecture, Package, RapidIO, RoHS Status, Series.
MPC8548PXAUJC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8548PXAULD
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC8548PXAUJA
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC8548PXAUJB
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →MPC8548PXAQG
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
MPC8548PXAUJC557 Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | PowerPC e500 |
| Core Count | 1 |
| Width ng Data Bus | 32-Bit |
| Maximum Core Frequency | 1.333 GHz |
| Series | PowerQUICC III |
| Product Family | MPC85xx |
| Packhaging | 783-FCPBGA (29x29 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Memory Controller | DDR2 (integrated) |
| PCI Express Controllers | Dual x1/x2/x4/x8 |
| Gigabit Ethernet MACs | Multiple (integrated) |
| RapidIO | Yes (integrated) |
| Security Engine | Yes (integrated IPSec/SSL acceleration) |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng MPC8548PXAUJC557 783-fcpbga (29x29 mm)
Pin configuration para sa MPC8548PXAUJC557 (783-fcpbga (29x29 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC8548PXAUJC557.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC8548PXAUJC557 ay nararapat para sa 6 aplikasyons: Enterprise Routers and L3 Switches, Secure VPN Gateway Appliances, Industrial Automation Controllers, Telecom Base Station Controllers, Network Attached Storage Controllers, Line Cards for Multi-Service Switches.
Enterprise Routers and L3 Switches
The MPC8548PXAUJC557's 1.333 GHz e500 core delivers deterministic packet-processing throughput needed for enterprise routers and managed L3 switches. The integrated security engine accelerates IPSec and SSL/TLS handshake rates, while dual PCI Express controllers provide high-bandwidth uplinks to switch fabric ASICs. Placed as the main CPU on the routing engine card, the device handles routing-table lookups, ACL enforcement, and management-plane services; it dissipates significant power at full load, so a top-mounted heatsink with thermal vias is essential.
Inirekomenda
Secure VPN Gateway Appliances
The MPC8548PXAUJC557's on-chip security engine accelerates bulk IPSec AES/3DES and SSL/TLS RSA operations, offloading the e500 core from data-path encryption. This makes it ideal for branch-office VPN gateways and SSL VPN concentrators that must sustain hundreds of tunnels. Multiple integrated Gigabit Ethernet MACs provide direct WAN/LAN connectivity without an external PHY switch. Trade-off: at high tunnel counts, two e500 cores (MPC8572E) may be required to maintain wire-speed throughput.
Inirekomenda
Industrial Automation Controllers
In factory automation and process-control platforms, the MPC8548PXAUJC557's deterministic e500 core, RapidIO interconnect, and PCI Express expansion deliver real-time control plus high-bandwidth data acquisition. Engineers use it in PLC backplanes, motion controllers, and SCADA concentrators where deterministic interrupt latency matters. Its extended peripheral set (PCI, PCIe, Ethernet, RapidIO) simplifies integration with industrial I/O modules, and the hardware security engine protects control-plane traffic. Verify the operating temperature grade against the NXP datasheet ordering table for harsh-environment deployments.
Inirekomenda
Telecom Base Station Controllers
The MPC8548PXAUJC557 is used in 3G/4G base station controllers and small-cell baseband units where the e500 core runs the real-time operating system and the integrated security engine secures backhaul traffic. Dual PCI Express ports connect to baseband and radio cards, while the DDR2 controller feeds high-bandwidth DSP arrays. The 783-FCPBGA package's high pin count allows direct connection to all peripherals without external bridges, saving board area. A solid thermal via array and top-side heatsink are required at full CPU load.
Inirekomenda
Network Attached Storage Controllers
For mid-range NAS controllers, the MPC8548PXAUJC557's e500 core runs file-system services while the integrated security engine accelerates encrypted-volume I/O (AES-XTS for self-encrypting drives). PCI Express links to SATA/SAS controller ASICs, and the Gigabit Ethernet MACs aggregate network throughput. The 32-bit data path is adequate for mid-volume NAS but limits peak bandwidth; high-end NAS designs migrate to the dual-core MPC8572E or QorIQ P2xxx/P4xxx families.
Inirekomenda
Line Cards for Multi-Service Switches
The MPC8548PXAUJC557 is widely deployed on line cards for carrier-grade multi-service switches, where it manages forwarding-plane programming, QoS policy, and per-port statistics. Its RapidIO and PCI Express ports connect to the switch fabric, while Gigabit Ethernet ports handle OAM and synchronization traffic. Hardware encryption offloads MACsec processing for transport security. Design must keep SERDES traces length-matched within the 783-FCPBGA breakout, and signal integrity simulations are mandatory before layout freeze.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC8548PXAUJC557 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC8548PXAUJC | MPC8548PXAULD | MPC8548PXAUJA | MPC8548PXAUJB | MPC8548PXAQG |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) |
| Maximum Core Frequency | 1.333 GHz | 1.333 GHz | Lower grade | Lower grade | Mid grade | Lower grade |
| Series | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) |
| Memory Controller | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) |
| Security Engine | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) |
| Lifecycle Status | active | active | active | active | active | active |
Pangunahing mga Pagkakaiba
- 1.333 GHz single-core performance with on-chip security engine (kumpara saMPC8548PXAUJC)
- Single-core e500 with integrated hardware crypto (kumpara saMPC8572EPXAVND)
- Mature PowerQUICC III platform with long-term NXP support (kumpara saP2020NSN2MHC)
Talaan ng Disenyo
The 783-FCPBGA (29x29 mm) package demands a high-layer-count PCB - typically 8 or more layers - with microvia or via-in-pad construction for the BGA breakout. DDR2 traces must be length-matched within the JEDEC DDR2 spec; SERDES lanes (PCI Express, RapidIO, SGMII) require controlled-impedance routing with 100 ohm differential pairs and tight length matching (typically < 5 mil tolerance). Reference the NXP AN-3661 layout application note and run signal-integrity simulations before layout freeze.
At 1.333 GHz core clock, the MPC8548PXAUJC557 dissipates approximately 8-12 W typical. The 783-FCPBGA package uses thermal-balls beneath the die; a thermal via array (typically 0.3 mm pitch) on the inner board layers connects to a copper spreader, and a top-side heatsink with thermal interface material is required for production designs. Estimate: with theta_JA around 12-15 C/W (heatsink-attached), a 10 W dissipation yields a 120-150 C junction rise above ambient - place the heatsink and verify with thermal imaging during prototype bring-up.
The MPC8548PXAUJC557 requires a multi-rail power supply: a core voltage (typically 1.0-1.1 V at high current), a DDR2 I/O voltage (1.8 V), a 3.3 V peripheral rail, and a 2.5 V SERDES analog rail. Each rail needs bulk decoupling (10-22 uF ceramic) placed within 1 cm of the supply balls, plus high-frequency decoupling (0.1 uF + 1 nF) at every supply cluster. Power-on reset sequencing per the NXP hardware specification is mandatory; failure to sequence correctly can latch the security engine in a state that requires a full power cycle.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance per LCSC and DigiKey Marketplace product listings. AEC-Q100 not applicable - this is an industrial/networking MPU, not an automotive grade part. Halogen-free status not explicitly stated in verified web data.