MPC8548PXAUJC557 - PowerQUICC III 1.333GHz e500 MPU | NXP
MPN： MPC8548PXAUJC557 ✓ 啟用中MPC8548PXAUJC557 概覽
A microprocessor (MPU) is a single-chip CPU that integrates the arithmetic logic unit, control unit, registers, cache, and often on-chip peripherals into one silicon die. MPU architecture follows the von Neumann or Harvard model and sits at the top of the embedded processing hierarchy: microcontroller -> microprocessor -> SoC high-end systems. The e500 core is a Power Book E embedded implementation, optimized for deterministic interrupt response and low-latency networking.
Key features of the MPC8548PXAUJC557 include the e500 core with integrated L1/L2 caches, a 64-bit DDR2 memory controller, dual x1/x2/x4/x8 PCI Express controllers, multiple Gigabit Ethernet MACs, RapidIO interconnect, and an integrated security engine. The 783-ball FCPBGA package provides the high pin density required for parallel memory, multiple high-speed serial links, and extensive general-purpose I/O.
The architecture combines the e500 superscalar core with a coherent core complex bus and a high-bandwidth system bus that feeds the platform peripherals. An integrated security block accelerates IPSec, SSL/TLS, and bulk data encryption, while dedicated DMA engines offload packet movement from the core.
Typical applications include enterprise routers and switches, secure VPN gateways, industrial control and automation platforms, line cards for multi-service switches, and telecom base station controllers. The wide peripheral mix and security acceleration make it especially attractive for L2/L3 managed switches and edge routers.
A key design consideration for the 783-FCPBGA is PCB layout: the package demands a high-layer-count board (typically 8 or more layers) with controlled-impedance routing for DDR2, SERDES, and PCI Express signals, plus a solid thermal via array beneath the exposed die region.
This page synthesizes verified distributor pricing, same-family drop-in alternatives, and PCB-layout considerations that go beyond the manufacturer datasheet, helping hardware engineers accelerate design-in and qualification for the MPC8548PXAUJC557.
直接替換替代品，適用於 MPC8548PXAUJC557 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MPC8548PXAUJC557 （相同外形與佔位） — 差異在於 Core Architecture, Package, RapidIO, RoHS Status, Series.
MPC8548PXAUJC
✅ 直接替換📋 參考替代品（不在目錄中）
MPC8548PXAULD
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8548PXAUJA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8548PXAUJB
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MPC8548PXAQG
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8548PXAUJC557 最大額定值與電氣特性
| Core Architecture | PowerPC e500 |
| Core Count | 1 |
| 資料匯流排寬度 | 32-Bit |
| Maximum Core Frequency | 1.333 GHz |
| Series | PowerQUICC III |
| Product Family | MPC85xx |
| 封裝 | 783-FCPBGA (29x29 mm) |
| 安裝類型 | Surface Mount |
| Memory Controller | DDR2 (integrated) |
| PCI Express Controllers | Dual x1/x2/x4/x8 |
| Gigabit Ethernet MACs | Multiple (integrated) |
| RapidIO | Yes (integrated) |
| Security Engine | Yes (integrated IPSec/SSL acceleration) |
| RoHS 狀態 | Compliant |
MPC8548PXAUJC557 783-fcpbga (29x29 mm) 腳位配置指南
MPC8548PXAUJC557（783-fcpbga (29x29 mm) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MPC8548PXAUJC557.
請參閱 資料表 以查看完整腳位配置。
典型應用
MPC8548PXAUJC557 適用於 6 應用s: Enterprise Routers and L3 Switches, Secure VPN Gateway Appliances, Industrial Automation Controllers, Telecom Base Station Controllers, Network Attached Storage Controllers, Line Cards for Multi-Service Switches.
Enterprise Routers and L3 Switches
The MPC8548PXAUJC557's 1.333 GHz e500 core delivers deterministic packet-processing throughput needed for enterprise routers and managed L3 switches. The integrated security engine accelerates IPSec and SSL/TLS handshake rates, while dual PCI Express controllers provide high-bandwidth uplinks to switch fabric ASICs. Placed as the main CPU on the routing engine card, the device handles routing-table lookups, ACL enforcement, and management-plane services; it dissipates significant power at full load, so a top-mounted heatsink with thermal vias is essential.
推薦
Secure VPN Gateway Appliances
The MPC8548PXAUJC557's on-chip security engine accelerates bulk IPSec AES/3DES and SSL/TLS RSA operations, offloading the e500 core from data-path encryption. This makes it ideal for branch-office VPN gateways and SSL VPN concentrators that must sustain hundreds of tunnels. Multiple integrated Gigabit Ethernet MACs provide direct WAN/LAN connectivity without an external PHY switch. Trade-off: at high tunnel counts, two e500 cores (MPC8572E) may be required to maintain wire-speed throughput.
推薦
Industrial Automation Controllers
In factory automation and process-control platforms, the MPC8548PXAUJC557's deterministic e500 core, RapidIO interconnect, and PCI Express expansion deliver real-time control plus high-bandwidth data acquisition. Engineers use it in PLC backplanes, motion controllers, and SCADA concentrators where deterministic interrupt latency matters. Its extended peripheral set (PCI, PCIe, Ethernet, RapidIO) simplifies integration with industrial I/O modules, and the hardware security engine protects control-plane traffic. Verify the operating temperature grade against the NXP datasheet ordering table for harsh-environment deployments.
推薦
Telecom Base Station Controllers
The MPC8548PXAUJC557 is used in 3G/4G base station controllers and small-cell baseband units where the e500 core runs the real-time operating system and the integrated security engine secures backhaul traffic. Dual PCI Express ports connect to baseband and radio cards, while the DDR2 controller feeds high-bandwidth DSP arrays. The 783-FCPBGA package's high pin count allows direct connection to all peripherals without external bridges, saving board area. A solid thermal via array and top-side heatsink are required at full CPU load.
推薦
Network Attached Storage Controllers
For mid-range NAS controllers, the MPC8548PXAUJC557's e500 core runs file-system services while the integrated security engine accelerates encrypted-volume I/O (AES-XTS for self-encrypting drives). PCI Express links to SATA/SAS controller ASICs, and the Gigabit Ethernet MACs aggregate network throughput. The 32-bit data path is adequate for mid-volume NAS but limits peak bandwidth; high-end NAS designs migrate to the dual-core MPC8572E or QorIQ P2xxx/P4xxx families.
推薦
Line Cards for Multi-Service Switches
The MPC8548PXAUJC557 is widely deployed on line cards for carrier-grade multi-service switches, where it manages forwarding-plane programming, QoS policy, and per-port statistics. Its RapidIO and PCI Express ports connect to the switch fabric, while Gigabit Ethernet ports handle OAM and synchronization traffic. Hardware encryption offloads MACsec processing for transport security. Design must keep SERDES traces length-matched within the 783-FCPBGA breakout, and signal integrity simulations are mandatory before layout freeze.
推薦
推薦產品摘要
工程參考資料，適用於 MPC8548PXAUJC557 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MPC8548PXAUJC | MPC8548PXAULD | MPC8548PXAUJA | MPC8548PXAUJB | MPC8548PXAQG |
|---|---|---|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) | PowerPC e500 (1 core) |
| Maximum Core Frequency | 1.333 GHz | 1.333 GHz | Lower grade | Lower grade | Mid grade | Lower grade |
| Series | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) | PowerQUICC III (MPC85xx) |
| Memory Controller | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) | DDR2 (integrated) |
| Security Engine | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) | Yes (integrated) |
| Lifecycle Status | active | active | active | active | active | active |
主要差異化特點
- 1.333 GHz single-core performance with on-chip security engine (對比MPC8548PXAUJC)
- Single-core e500 with integrated hardware crypto (對比MPC8572EPXAVND)
- Mature PowerQUICC III platform with long-term NXP support (對比P2020NSN2MHC)
設計說明
The 783-FCPBGA (29x29 mm) package demands a high-layer-count PCB - typically 8 or more layers - with microvia or via-in-pad construction for the BGA breakout. DDR2 traces must be length-matched within the JEDEC DDR2 spec; SERDES lanes (PCI Express, RapidIO, SGMII) require controlled-impedance routing with 100 ohm differential pairs and tight length matching (typically < 5 mil tolerance). Reference the NXP AN-3661 layout application note and run signal-integrity simulations before layout freeze.
At 1.333 GHz core clock, the MPC8548PXAUJC557 dissipates approximately 8-12 W typical. The 783-FCPBGA package uses thermal-balls beneath the die; a thermal via array (typically 0.3 mm pitch) on the inner board layers connects to a copper spreader, and a top-side heatsink with thermal interface material is required for production designs. Estimate: with theta_JA around 12-15 C/W (heatsink-attached), a 10 W dissipation yields a 120-150 C junction rise above ambient - place the heatsink and verify with thermal imaging during prototype bring-up.
The MPC8548PXAUJC557 requires a multi-rail power supply: a core voltage (typically 1.0-1.1 V at high current), a DDR2 I/O voltage (1.8 V), a 3.3 V peripheral rail, and a 2.5 V SERDES analog rail. Each rail needs bulk decoupling (10-22 uF ceramic) placed within 1 cm of the supply balls, plus high-frequency decoupling (0.1 uF + 1 nF) at every supply cluster. Power-on reset sequencing per the NXP hardware specification is mandatory; failure to sequence correctly can latch the security engine in a state that requires a full power cycle.
合規資訊
RoHS compliance per LCSC and DigiKey Marketplace product listings. AEC-Q100 not applicable - this is an industrial/networking MPU, not an automotive grade part. Halogen-free status not explicitly stated in verified web data.