MPC8569EVJAUNLB - PowerQUICC III SoC, 1.333 GHz e500, 783-FCPBGA | NXP
MPN: MPC8569EVJAUNLB ✗ Tapus ng BuhayMPC8569EVJAUNLB Ulas
A PowerQUICC processor is a family of Power Architecture-based communications processors designed by Freescale (now NXP) to consolidate control-plane and data-plane processing for routers, base stations, and access multiplexers. The MPC8569E specifically extends the QorIQ/PowerQUICC lineage by pairing a fast e500v2 CPU with serial interconnect IP that replaces parallel local buses, while still maintaining TDM support through the QUICC Engine subsystem.
Key features include 1.333 GHz core frequency, 72-bit (64-bit + ECC) DDR2/DDR3 memory controller up to 800 MT/s, integrated Security Engine with AES, 3DES, RSA, and elliptic-curve acceleration, dual GbE with SGMII support, two PCI Express interfaces, two Serial RapidIO interfaces, and the Universal Serial QUICC Engine for multi-protocol bridging. Operating voltage rails include 1.5 V, 1.8 V, 2.5 V, and 3.3 V rails sourced through a sequenced power scheme.
The MPC8569E uses a 783-ball FCBGA package with a thermal resistance of approximately 12-15 C/W and requires a heatsink for sustained 1.333 GHz operation. The e500v2 core executes Power Architecture Book E instructions with a double-precision FPU, MMU with 32-bit virtual addressing, and hardware-accelerated table-walk for high-TLB-miss workloads such as routing lookups.
Typical applications include 3G/WiMAX/LTE base station controllers, radio network controllers (RNC), multi-service gateways, ATM/TDM/IP aggregation switches, and secure industrial routers. The integrated SEC and QUICC Engine make it well suited to IPsec VPN concentrators and protocol-conversion appliances bridging legacy TDM to packet networks.
When designing with this device, ensure the DDR2/DDR3 routing follows the JEDEC-controlled-impedance guidelines and that the SERDES reference clocks use a low-jitter oscillator. The QUICC Engine microcode must be loaded from NAND/NOR at boot; an appropriate boot sequencer or board support package is required to initialize SERDES lanes and PCIe endpoints.
Mga alternatibo na pwedeng ilagay na MPC8569EVJAUNLB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
MPC8569EVJAUJLB
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8568EVJAQND
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
MPC8569EVJAUNLB Mga Pinakamataas na Rating at Electrical Characteristics
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC III |
| Core Architecture | Power Architecture e500v2 |
| Core Count | 1 |
| Width ng Data Bus | 32-bit |
| Maximum Core Frequency | 1.333 GHz |
| L2 Cache | 512 KB |
| Temperature na Operasyon | 0C to +105C |
| Volte ng Pagbibigay | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Packhaging | 783-FCPBGA (29x29 mm) |
| Process Technology | 0.04 micron CMOS |
| Memory Controller | DDR2/DDR3 with ECC (64-bit + 8-bit ECC, up to 800 MT/s) |
| Security Engine | SEC with AES, 3DES, RSA, ECC |
| Ethernet | Dual 10/100/1000 Mb/s with SGMII |
| Serial Interfaces | 2x PCI Express, 2x Serial RapidIO |
| Communications Engine | QUICC Engine with multiple TDM/UTOPIA/POS interfaces |
| Uri ng Pagpapasok | Surface Mount (FCBGA) |
Gabay sa Pin Configuration ng MPC8569EVJAUNLB 783-fcpbga (29x29 mm)
Pin configuration para sa MPC8569EVJAUNLB (783-fcpbga (29x29 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa MPC8569EVJAUNLB.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MPC8569EVJAUNLB ay nararapat para sa 6 aplikasyons: 3G/WiMAX/LTE Base Station Controller, Radio Network Controller (RNC), Multi-Service Gateway, ATM/TDM/IP Aggregation Switch, IPsec VPN Concentrator, Industrial Secure Router.
3G/WiMAX/LTE Base Station Controller
The MPC8569EVJAUNLB's 1.333 GHz e500v2 core and dual GbE with SGMII deliver line-rate processing for base station controllers and Node B aggregation equipment. Its 72-bit DDR2/DDR3 controller with ECC up to 800 MT/s maintains low-latency access to routing tables and bearer buffers. The integrated Security Engine accelerates AES/3DES/RSA operations required for IPSec tunnels between eNodeB and the core network.
Inirekomenda
Radio Network Controller (RNC)
For radio network controller deployments, the MPC8569EVJAUNLB provides the combination of a 32-bit Power Architecture core, Serial RapidIO for backplane interconnect, and the QUICC Engine for legacy Abis/ATM traffic. Its hardware offload engines leave the e500v2 core available for RRC, NBAP, and Iu-CS signaling stacks. The 783-FCPBGA package supports extended 0-105C operation required in central-office installations.
Inirekomenda
Multi-Service Gateway
Multi-service gateway platforms leverage the MPC8569EVJAUNLB's dual PCI Express lanes to attach Ethernet and DSL line-card controllers while routing traffic through SGMII up-links. The QUICC Engine handles legacy TDM/Frame Relay while the SEC terminates IPsec VPN sessions. 512 KB of L2 cache combined with DDR3 at 800 MT/s supports deep packet inspection queues at 1+ Mpps.
Inirekomenda
ATM/TDM/IP Aggregation Switch
Aggregation switches built on the MPC8569EVJAUNLB use the QUICC Engine to terminate ATM PVCs and TDM trunks while the e500v2 core handles IP forwarding. Serial RapidIO links carry switch fabric traffic to line cards, and the integrated SEC ensures that aggregation uplinks remain encrypted across administrative boundaries. The 783-FCPBGA footprint is shared with the MPC8568 family for design reuse.
Inirekomenda
IPsec VPN Concentrator
In IPsec VPN concentrator designs, the MPC8569EVJAUNLB's Security Engine accelerates AES-256 and 3DES operations at multi-gigabit line rate, while the e500v2 core handles IKE key exchange and policy lookup. Dual GbE with SGMII provides clear-text and encrypted network segments without external MAC devices. The 783-FCPBGA package allows dense multi-port chassis assemblies.
Inirekomenda
Industrial Secure Router
The MPC8569EVJAUNLB's 0-105C industrial temperature grade and hardware SEC make it a strong fit for industrial sites requiring IPsec-encrypted SCADA backhauls. Two PCI Express lanes host 4-port Ethernet controllers, and Serial RapidIO connects to local PLCs and I/O modules. Combined with a hardened U-Boot or VxWorks BSP, the device delivers deterministic routing latency below 50 microseconds.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MPC8569EVJAUNLB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | MPC8569EVJAUJLB | MPC8568EVJAQND |
|---|---|---|---|
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 1.333 GHz | 1.0 GHz | 1.0 GHz |
| Core Architecture | e500v2 | e500v2 | e500v2 |
| L2 Cache | 512 KB | 512 KB | 256 KB |
| Security Engine (SEC) | Yes (AES, 3DES, RSA, ECC) | Yes | No |
| Memory Controller | DDR2/DDR3 ECC up to 800 MT/s | DDR2/DDR3 ECC up to 800 MT/s | DDR2 ECC up to 533 MT/s |
| PCIe Lanes | 2 | 2 | 1 |
| Operating Temperature | 0C to +105C | 0C to +105C | 0C to +105C |
Pangunahing mga Pagkakaiba
- Highest speed grade in the MPC8569E family (kumpara saMPC8569EVJAUJLB)
- Integrated Security Engine (kumpara saMPC8568EVJAQND)
- DDR3 800 MT/s with ECC (kumpara saMPC8568EVJAQND)
Talaan ng Disenyo
Estimated: at 1.333 GHz in the 783-FCPBGA package, power dissipation typically falls in the 5-8 W range. With a typical theta_JA of 12-15 C/W, junction temperature can rise 60-100C above ambient in still air. Use an extruded aluminum heatsink (1U-2U pitch) plus thermal interface material, or forced-air cooling, to keep Tj below 105C.
The DDR2/DDR3 interface operates up to 800 MT/s with 64-bit + ECC - route address and data groups with matched length, 50-ohm controlled impedance, and VTT termination per JEDEC. Reference the NXP AN-3530 style layout guidance and run SI simulation before committing the stackup. SERDES SGMII and Serial RapidIO lanes require 100-ohm differential routing with length matching.
The MPC8569EVJAUNLB requires a sequenced power-on (1.5V, 1.8V, 2.5V, 3.3V) per the NXP datasheet; out-of-order ramps can latch up the SERDES or reset logic. Ensure the boot sequencer loads the QUICC Engine microcode image from NOR/NAND before attempting TDM/ATM bring-up. Verify e500v2 JTAG header isolation on production boards to avoid debug-mode lockouts.
Reference clocks for SERDES must come from a low-jitter (<1 ps RMS) oscillator, with a clean supply via ferrite bead and decoupling capacitors. Improper clock source selection on the MPC8569EVJAUNLB will degrade SGMII and Serial RapidIO link margin. Series-terminate clock outputs near the driver to avoid reflections on long traces.
Impormasyon ng Pagsunod sa Kautusan
Compliance status was not present in the Verified Web Data excerpts; designers should request the latest material declaration from NXP before declaring compliance for production builds.