OPA2132P - 8MHz Dual FET-Input Op Amp | Texas Instruments
MPN: OPA2132P ✓ NakahandaOPA2132P Ulas
An operational amplifier is a voltage-gain stage used to amplify the difference between two input voltages. The OPA2132P belongs to the FET-input operational amplifier family, using field-effect transistor input stages to provide very low input bias current. This makes the device suitable for high-impedance sources, audio signal chains, measurement front ends, and feedback networks where conventional bipolar-input amplifiers may load the source excessively.
The OPAx132 family combines high speed with low noise and low distortion. Key characteristics identified in the manufacturer documentation include 8 MHz wide bandwidth, 20 V/us high slew rate, 0.00008% low distortion, and 130 dB open-loop gain with a 600 ohm load. The dual configuration provides two amplifiers in one package, simplifying balanced audio, active filtering, and dual-channel signal-conditioning designs while reducing the number of external packages.
OPA2132P is intended for applications requiring low input bias current and accurate signal handling. The 5 pA maximum input bias current supports high-impedance instrumentation and source-following configurations, while the 8 MHz bandwidth and 20 V/us slew rate allow the amplifier to process higher-frequency signals and reproduce large-amplitude waveforms with low distortion. The 500 uV maximum offset voltage specification is also relevant to precision dc and audio applications.
Common uses include audio preamplifiers, active filters, data-conversion input buffers, communications interfaces, and instrumentation amplifiers. In a high-impedance audio input stage, the low bias current helps preserve the source signal. In an active filter, the high bandwidth and slew rate support faster signal transitions. In data-acquisition circuits, the dual package can support two signal channels or a gain stage with an active feedback network.
Designers should confirm the complete pin assignment, input common-mode range, output swing, supply-current behavior, stability requirements, and recommended external components in the manufacturer datasheet before layout. Decoupling capacitors should be placed close to the supply pins, and feedback components should follow the recommended values. PCB leakage and contamination should also be controlled when the very low input bias current is central to the design.
This product page combines the OPA2132P technical characteristics, source links, application guidance, and drop-in replacement information to support faster component selection and PCB implementation. Use the Request a Quote form on this page for current commercial availability and lead-time information.
Mga alternatibo na pwedeng ilagay na OPA2132P — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
OPA2132PA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
OPA2134PA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
OPA2132P Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Dual FET-input operational amplifier |
| Number of Channels | 2 channels |
| Gain-Bandwidth Product | 8 MHz |
| Slew Rate | 20 V/us |
| Input Bias Current | 50 pA maximum |
| Low-Noise Input Current | 5 pA |
| Low Distortion | 0.00008% |
| Open-Loop Gain | 130 dB with 600 ohm load |
| Supply Voltage Range | +/-2.5 V to +/-18 V |
| Offset Voltage | 500 uV maximum |
| Input Transistor Type | FET |
| Packhaging | 8-PDIP |
| Uri ng Pagpapasok | Through-hole |
| Application Category | General-purpose, audio, data-acquisition, and communications |
Gabay sa Pin Configuration ng OPA2132P 8-pdip
Pin configuration para sa OPA2132P (8-pdip package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa OPA2132P.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
OPA2132P ay nararapat para sa 6 aplikasyons: High-Impedance Audio Preamp, Active Audio Filter, Data-Acquisition Input Buffer, Communications Signal Conditioning, Precision Instrumentation Buffer, Balanced Audio Output.
High-Impedance Audio Preamp
The OPA2132P fits a high-impedance audio preamplifier because its FET input stage limits input bias current to 50 pA maximum while retaining 8 MHz bandwidth and 20 V/us slew rate. In a source-follower or non-inverting gain stage, the low bias current reduces loading on the preceding source and helps preserve signal amplitude. The 0.00008% distortion specification also makes the dual amplifier useful in audio paths requiring low signal degradation. Use one channel for the signal and the other for an active filter, buffer, or balanced drive stage, while checking output swing and load compatibility against the manufacturer electrical-characteristics table.
Inirekomenda
Active Audio Filter
The OPA2132P is appropriate for an active audio filter requiring low bias current, ample bandwidth, and fast settling. Its 8 MHz gain-bandwidth product and 20 V/us slew rate allow the active stage to handle high-frequency components and larger signal transitions with low distortion. In a low-pass, high-pass, or equalizer network, the FET inputs help preserve signals from high-impedance sources without adding substantial loading. The two channels can implement linked filter sections or independent channels. Select resistor and capacitor values against the closed-loop bandwidth and stability guidance in the Texas Instruments OPAx132 datasheet.
Inirekomenda
Data-Acquisition Input Buffer
OPA2132P can serve as a low-input-current buffer in a data-acquisition front end when the source impedance is high. Its 50 pA maximum input bias current minimizes the current drawn from sensors or sensor-conditioning networks, while 8 MHz bandwidth supports signals above the precision-audio range. The dual package allows one channel to buffer the measurement input and the other to drive an anti-alias or gain stage. Check the complete input common-mode range, offset behavior, and output-swing limits for the selected supply before implementation, and use the manufacturer application guidance for a stable closed-loop configuration.
Inirekomenda
Communications Signal Conditioning
The OPA2132P is suited to communications signal-conditioning stages that require low input current and fast response. The 50 pA maximum input bias current is useful when the amplifier follows a high-impedance source, while 8 MHz bandwidth and 20 V/us slew rate support faster waveforms than conventional precision op-amps. Both channels can be used for receive-path conditioning, active impedance conversion, or differential signal handling. The 130 dB open-loop gain with a 600 ohm load provides useful dc-loop gain, but the actual signal integrity depends on the feedback network, load, supply configuration, and board layout. Review stability and bandwidth-distortion data before releasing the circuit.
Inirekomenda
Precision Instrumentation Buffer
OPA2132P supports precision instrumentation-buffer functions where low input bias current helps reduce measurement errors. The 500 uV maximum offset voltage and 130 dB open-loop gain with a 600 ohm load are important when the circuit uses high closed-loop gain, while the 5 pA low-noise input-current figure supports high-impedance feedback networks. One amplifier channel can buffer the measurement input and the other can provide gain or active feedback. The complete input common-mode range and output-swing behavior must be checked at the actual supply voltage, and PCB leakage should be minimized because contamination can undermine the benefit of the very low input current.
Inirekomenda
Balanced Audio Output
The dual OPA2132P can support balanced audio output circuitry where matched dual channels and low distortion are useful. The 0.00008% distortion characteristic, 8 MHz bandwidth, and 20 V/us slew rate help maintain signal integrity through gain and driver stages, while 50 pA maximum input bias current protects high-impedance upstream nodes from excessive loading. The two amplifiers can form a balanced gain stage or drive two sides of a balanced output network. Confirm output-current capability, voltage swing, and load stability for the target amplifier and verify the power-supply layout because the available supply range extends to ±18 V.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for OPA2132P — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | OPA2132PA | OPA2134PA |
|---|---|---|---|
| Package | 8-PDIP | 8-PDIP | 8-PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier |
Pangunahing mga Pagkakaiba
- Low-current dual input stage (kumpara saOPA2134PA)
- High-speed signal capability (kumpara saOPA2134PA)
- Low-distortion dual-amplifier implementation (kumpara saOPA2134PA)
Talaan ng Disenyo
Place the required supply-bypass capacitors immediately adjacent to the OPA2132P supply pins, and route their ground returns directly to the device ground reference plane. Keep feedback traces short and isolate them from clocks, switching converters, and digital return currents. Because the dual amplifier can be sensitive to parasitic capacitance at high gain, follow the recommended resistor and capacitor values in the manufacturer datasheet rather than substituting arbitrarily large compensation capacitors.
Do not assume that every dual 8-pin operational amplifier is pin-compatible with the OPA2132P. Confirm the DIP-8 pin assignment, including supply, output, offset-null, and any compensation-related pins, against the Texas Instruments pin-description table. Also verify the input common-mode range and output swing at the selected supply voltage; a matching package alone does not establish electrical compatibility.
For high-impedance sources, minimize leakage from board contamination, moisture, flux residue, and adjacent high-impedance nodes. The OPA2132P has 50 pA maximum input bias current, so the leakage current surrounding the input can materially affect the signal if it approaches that level. Use a clean PCB surface, guard structures where appropriate, and low-leakage protection devices, then validate the complete source impedance and environmental conditions.
Impormasyon ng Pagsunod sa Kautusan
Compliance status for the exact OPA2132P ordering code should be confirmed through the current Texas Instruments product documentation. The available product and datasheet snippets identify the device and its electrical characteristics but do not state the requested compliance classifications.