OPA227UA - 8MHz Precision Op Amp | Texas Instruments
MPN: OPA227UA ✓ NakahandaOPA227UA Ulas
An operational amplifier is a voltage-feedback analog building block that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. The OPA227 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its low-noise and low-offset characteristics support accurate amplification of small signals, while unity-gain stability permits direct use as a voltage follower or buffer without an external compensation network.
The OPA227UA provides an 8 MHz gain-bandwidth product and 2.3 V/us slew rate, allowing it to handle signals beyond the audio band while retaining low-noise operation. Its unity-gain-stable architecture supports closed-loop gains at or near one, which simplifies precision buffering, active filtering, and sensor-interface layouts. The device is offered in an 8-SOIC package and is specified for operation from -40°C to +85°C.
Texas Instruments describes the OPAx227 family as combining low noise, wide bandwidth, and high precision. That combination makes the amplifier useful in systems where a conventional general-purpose amplifier would introduce excessive noise, offset error, or bandwidth limitation. The OPA227 series is also identified as pin-for-pin compatible with the industry-standard OP27 and OP37 families, enabling focused upgrade paths for precision analog designs.
Typical applications include low-level sensor signal conditioning, precision current-loop and voltage measurement, laboratory instrumentation, audio preamplification, active filters, and industrial control interfaces. In each case, the amplifier can be configured around external resistors or capacitors while its unity-gain stability reduces the need for additional compensation components.
When laying out a precision circuit, keep feedback components and sensitive input nodes compact, provide stable supply bypassing, and avoid routing high-current output paths near the input terminals. Check the operating supply range, input common-mode limits, output swing, and stability requirements against the manufacturer datasheet before finalizing the system power architecture and component tolerances.
This page consolidates the verified technical characteristics, package information, drop-in replacement candidates, application guidance, and design cautions for OPA227UA engineers. It also distinguishes documented device ratings from parameters that require confirmation against the latest manufacturer documentation before production release.
Mga alternatibo na pwedeng ilagay na OPA227UA — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok OPA227UA (parehas na form factor at footprint) — pagkakaiba sa Product Type, Package, Slew Rate, Number of Circuits, Gain-Bandwidth Product.
OP27UA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
OP37UA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD797ARZ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
OPA227UA Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | High-precision, low-noise operational amplifier |
| Number of Circuits | 1 circuit |
| Amplifier Type | Voltage-feedback operational amplifier |
| Gain-Bandwidth Product | 8 MHz |
| Slew Rate | 2.3 V/us |
| Gain Stability | Unity-gain stable |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Packhaging | 8-SOIC |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Compliant |
| REACH Status | Unknown |
Gabay sa Pin Configuration ng OPA227UA 8-soic
Pin configuration para sa OPA227UA (8-soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa OPA227UA.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
OPA227UA ay nararapat para sa 6 aplikasyons: Precision Sensor Signal Conditioning, Audio Preamplification, Precision Current Measurement, Active Precision Filtering, Test and Measurement Instrumentation, Industrial Control Interfaces.
Precision Sensor Signal Conditioning
OPA227UA fits low-level sensor front ends where low noise and accurate DC amplification are more important than absolute speed. Its 8 MHz gain-bandwidth product preserves useful response well above the common low-frequency sensor band, while the 2.3 V/us slew rate reduces distortion on moderately fast transients. The amplifier can provide differential gain, current-to-voltage conversion, or unity-gain buffering around the sensor. Because accuracy depends on more than bandwidth alone, use precision resistors, low-leakage protection components, grounded guard structures where appropriate, and clean supply bypassing. Verify the common-mode range at the sensor node and the output swing required by the next conversion stage.
Inirekomenda
Audio Preamplification
OPA227UA is suitable for low-noise audio preamplification because the OPA227 family combines high precision with low-noise operation and an 8 MHz gain-bandwidth product. A moderate closed-loop gain can amplify microphone, instrument, or line-level signals without relying on the unity-gain bandwidth as the usable signal bandwidth. The 2.3 V/us slew rate provides additional headroom for musical transients. Its SOIC package also simplifies mixed-signal board construction, although designers should establish the required noise floor, channel balance, output drive, and headroom before fixing the gain topology. Decouple the supply pins locally and keep the feedback network stable and physically compact.
Inirekomenda
Precision Current Measurement
OPA227UA can amplify the small voltage generated by a shunt or current-sense element when measurement accuracy and low-level noise dominate the design. Its high-precision positioning helps reduce errors from input offset, while the 8 MHz bandwidth is ample for many industrial control and laboratory measurement loops. Configure the amplifier as a differential gain stage and account carefully for common-mode voltage, input bias current, resistor tolerance, and shunt Kelvin connections. A shielded or guarded layout is preferable when the sensed level is close to microvolts or millivolts. Before deployment, validate the complete error budget over temperature and confirm that the selected amplifier remains stable with the parasitic capacitance introduced by the sensor wiring and protection network.
Inirekomenda
Active Precision Filtering
OPA227UA is appropriate for active filters that combine accurate closed-loop gain with controlled AC performance. Its 8 MHz gain-bandwidth product provides bandwidth beyond the baseband of many communications, measurement, and audio systems, while unity-gain stability supports buffer and first-stage topologies. Choose resistor and capacitor values with stable tolerances and low temperature coefficients to avoid degrading the nominal filter response. The device's low-noise characteristics can improve small-signal filter performance, although input bias current, common-mode limits, and output loading remain important design constraints. Simulate the complete filter with realistic source and load impedances, and check gain peaking and phase margin before fabrication.
Inirekomenda
Test and Measurement Instrumentation
OPA227UA fits laboratory and test equipment that amplify weak, accurately defined signals while preserving a low noise floor. The combination of high precision, low noise, and 8 MHz bandwidth supports buffer stages, programmable-gain front ends, and instrumentation amplifiers built from multiple matched channels. Use the unity-gain-stable device for direct buffering where needed, and maintain short feedback paths to minimize parasitic feedback. Grounding and shielding should be planned around the input source rather than added after board assembly. For demanding instruments, evaluate input bias current, offset drift, noise at the measurement bandwidth, and settling behavior directly from the manufacturer documentation before fixing the signal-chain gain distribution.
Inirekomenda
Industrial Control Interfaces
OPA227UA can condition low-level feedback or sensor signals in industrial control systems where predictable precision is required over -40°C to +85°C. Its 8 MHz bandwidth and 2.3 V/us slew rate provide more speed than many slow process-control loops require, while the single 8-SOIC format supports cost-conscious analog front ends. Include input protection that does not compromise common-mode range, and place supply bypassing and feedback components close to the amplifier. Verify the exact supply operating range and output-swing limits in the manufacturer datasheet. For safety-critical or regulated equipment, also review the system qualification requirements, isolation strategy, and environmental test plan rather than relying only on component-level performance.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for OPA227UA — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | OP27UA | OP37UA | AD797ARZ |
|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
Pangunahing mga Pagkakaiba
- Combines low-noise operation with 8 MHz bandwidth (kumpara saAD797ARZ)
- Unity-gain-stable single-amplifier implementation (kumpara saOP27UA)
- Documented pin-compatible upgrade path from OP27 and OP37 families (kumpara saOP37UA)
Talaan ng Disenyo
Place the OPA227UA feedback resistors, input components, and optional compensation capacitor directly beside the associated pins. Keep the non-inverting input path short and avoid routing it beneath digital clocks, switching-node copper, or inductor connections. For sensitive measurements, use a continuous ground reference and consider guarding the input node against surface leakage. Check the assembled board for contamination and connector leakage when working with very small signals.
Use the manufacturer's recommended power-supply arrangement and place the bypass capacitor immediately across the supply and ground pins. The bypass path should be short because supply impedance contributes directly to noise and can affect stability. Decouple sensitive analog sections locally rather than relying on a distant bulk capacitor. Confirm that the selected rails remain inside the device's documented operating limits under startup, load transients, temperature variation, and the worst-case power-supply tolerance.
Do not assume that unity-gain stability guarantees stability with every practical load. Capacitive loading, excessive output current, incorrect feedback topology, and source or sink impedance outside the recommended range can alter closed-loop behavior. Use stable precision resistors, keep feedback-loop area small, and simulate the final source impedance and load capacitance. Validate noise and settling with the complete analog chain rather than evaluating the amplifier alone.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is identified for OPA227UA. The available technical information does not establish REACH, halogen-free, conflict-minerals, or automotive qualification status.