Texas Instruments

OPA227UA - 8MHz Precision Op Amp | Texas Instruments

MPN: OPA227UA ✓ Aktif
8-SOIC Package
MOQ: 1 |

OPA227UA Genel Bakış

The Texas Instruments OPA227UA is a single-circuit, high-precision, low-noise operational amplifier with an 8 MHz gain-bandwidth product, 2.3 V/us slew rate, and unity-gain stability in an 8-pin SOIC package. The device combines precision DC performance with wide bandwidth, making it suitable for instrumentation, industrial measurement, and audio signal-conditioning systems.

An operational amplifier is a voltage-feedback analog building block that uses differential feedback to amplify the voltage difference between its inverting and non-inverting inputs. The OPA227 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its low-noise and low-offset characteristics support accurate amplification of small signals, while unity-gain stability permits direct use as a voltage follower or buffer without an external compensation network.

The OPA227UA provides an 8 MHz gain-bandwidth product and 2.3 V/us slew rate, allowing it to handle signals beyond the audio band while retaining low-noise operation. Its unity-gain-stable architecture supports closed-loop gains at or near one, which simplifies precision buffering, active filtering, and sensor-interface layouts. The device is offered in an 8-SOIC package and is specified for operation from -40°C to +85°C.

Texas Instruments describes the OPAx227 family as combining low noise, wide bandwidth, and high precision. That combination makes the amplifier useful in systems where a conventional general-purpose amplifier would introduce excessive noise, offset error, or bandwidth limitation. The OPA227 series is also identified as pin-for-pin compatible with the industry-standard OP27 and OP37 families, enabling focused upgrade paths for precision analog designs.

Typical applications include low-level sensor signal conditioning, precision current-loop and voltage measurement, laboratory instrumentation, audio preamplification, active filters, and industrial control interfaces. In each case, the amplifier can be configured around external resistors or capacitors while its unity-gain stability reduces the need for additional compensation components.

When laying out a precision circuit, keep feedback components and sensitive input nodes compact, provide stable supply bypassing, and avoid routing high-current output paths near the input terminals. Check the operating supply range, input common-mode limits, output swing, and stability requirements against the manufacturer datasheet before finalizing the system power architecture and component tolerances.

This page consolidates the verified technical characteristics, package information, drop-in replacement candidates, application guidance, and design cautions for OPA227UA engineers. It also distinguishes documented device ratings from parameters that require confirmation against the latest manufacturer documentation before production release.

Drop-in alternatifler için OPA227UA — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller OPA227UA (aynı form faktörü ve ayağa oturma) — farklı olan Product Type, Package, Slew Rate, Number of Circuits, Gain-Bandwidth Product.

Texas Instruments
Product Type: Single operational amplifier
Package: 8-pin SOIC
Slew Rate: 2.5 V/µs
İle Karşılaştır OPA227UA →
Texas Instruments
Package: SOIC-8 (D)
İle Karşılaştır OPA227UA →
Texas Instruments
Product Type: Precision operational amplifier
Package: 8-pin SOIC
Slew Rate: 10 V/µs
İle Karşılaştır OPA227UA →
Texas Instruments
Product Type: Ultra-low-noise precision operational amplifier
Package: 8-pin SOIC
Number of Circuits: 1 amplifier
İle Karşılaştır OPA227UA →

OP27UA

✅ Yerleştirme
📦 8-SOIC
Legacy industry-standard precision amplifier; the documented OPAx227 family is pin-for-pin compatible with OP27, while offset, noise, and drift ratings require comparison.

📋 Katalogda Olmayan Referans Alternatifi

OP37UA

✅ Yerleştirme
📦 8-SOIC
Industry-standard OP37-family device with the documented pin-compatible OPAx227 relationship; compensation and bandwidth behavior must be checked against the existing design.

📋 Katalogda Olmayan Referans Alternatifi

AD797ARZ

✅ Yerleştirme
📦 8-SOIC
Cross-brand precision amplifier associated with OPA227 replacement comparisons; exact noise, offset, supply, and stability differences require circuit-level review.

📋 Katalogda Olmayan Referans Alternatifi

OPA227UA Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type High-precision, low-noise operational amplifier
Number of Circuits 1 circuit
Amplifier Type Voltage-feedback operational amplifier
Gain-Bandwidth Product 8 MHz
Slew Rate 2.3 V/us
Gain Stability Unity-gain stable
İşletim Sıcaklığı Aralığı -40°C to +85°C
Paket 8-SOIC
Montaj Türü Surface mount
RoHS Durumu Compliant
REACH Status Unknown

OPA227UA 8-soic Pin Yapısı Kılavuzu

OPA227UA (8-soic paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-soic paket pin çizelgesi için OPA227UA

Ayrıntılı pin çıkış verisi mevcut değil: OPA227UA.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

OPA227UA için uygundur 6 uygulamas: Precision Sensor Signal Conditioning, Audio Preamplification, Precision Current Measurement, Active Precision Filtering, Test and Measurement Instrumentation, Industrial Control Interfaces.

🏭

Precision Sensor Signal Conditioning

OPA227UA fits low-level sensor front ends where low noise and accurate DC amplification are more important than absolute speed. Its 8 MHz gain-bandwidth product preserves useful response well above the common low-frequency sensor band, while the 2.3 V/us slew rate reduces distortion on moderately fast transients. The amplifier can provide differential gain, current-to-voltage conversion, or unity-gain buffering around the sensor. Because accuracy depends on more than bandwidth alone, use precision resistors, low-leakage protection components, grounded guard structures where appropriate, and clean supply bypassing. Verify the common-mode range at the sensor node and the output swing required by the next conversion stage.

🎧

Audio Preamplification

OPA227UA is suitable for low-noise audio preamplification because the OPA227 family combines high precision with low-noise operation and an 8 MHz gain-bandwidth product. A moderate closed-loop gain can amplify microphone, instrument, or line-level signals without relying on the unity-gain bandwidth as the usable signal bandwidth. The 2.3 V/us slew rate provides additional headroom for musical transients. Its SOIC package also simplifies mixed-signal board construction, although designers should establish the required noise floor, channel balance, output drive, and headroom before fixing the gain topology. Decouple the supply pins locally and keep the feedback network stable and physically compact.

⚡

Precision Current Measurement

OPA227UA can amplify the small voltage generated by a shunt or current-sense element when measurement accuracy and low-level noise dominate the design. Its high-precision positioning helps reduce errors from input offset, while the 8 MHz bandwidth is ample for many industrial control and laboratory measurement loops. Configure the amplifier as a differential gain stage and account carefully for common-mode voltage, input bias current, resistor tolerance, and shunt Kelvin connections. A shielded or guarded layout is preferable when the sensed level is close to microvolts or millivolts. Before deployment, validate the complete error budget over temperature and confirm that the selected amplifier remains stable with the parasitic capacitance introduced by the sensor wiring and protection network.

🌐

Active Precision Filtering

OPA227UA is appropriate for active filters that combine accurate closed-loop gain with controlled AC performance. Its 8 MHz gain-bandwidth product provides bandwidth beyond the baseband of many communications, measurement, and audio systems, while unity-gain stability supports buffer and first-stage topologies. Choose resistor and capacitor values with stable tolerances and low temperature coefficients to avoid degrading the nominal filter response. The device's low-noise characteristics can improve small-signal filter performance, although input bias current, common-mode limits, and output loading remain important design constraints. Simulate the complete filter with realistic source and load impedances, and check gain peaking and phase margin before fabrication.

🖥️

Test and Measurement Instrumentation

OPA227UA fits laboratory and test equipment that amplify weak, accurately defined signals while preserving a low noise floor. The combination of high precision, low noise, and 8 MHz bandwidth supports buffer stages, programmable-gain front ends, and instrumentation amplifiers built from multiple matched channels. Use the unity-gain-stable device for direct buffering where needed, and maintain short feedback paths to minimize parasitic feedback. Grounding and shielding should be planned around the input source rather than added after board assembly. For demanding instruments, evaluate input bias current, offset drift, noise at the measurement bandwidth, and settling behavior directly from the manufacturer documentation before fixing the signal-chain gain distribution.

🏭

Industrial Control Interfaces

OPA227UA can condition low-level feedback or sensor signals in industrial control systems where predictable precision is required over -40°C to +85°C. Its 8 MHz bandwidth and 2.3 V/us slew rate provide more speed than many slow process-control loops require, while the single 8-SOIC format supports cost-conscious analog front ends. Include input protection that does not compromise common-mode range, and place supply bypassing and feedback components close to the amplifier. Verify the exact supply operating range and output-swing limits in the manufacturer datasheet. For safety-critical or regulated equipment, also review the system qualification requirements, isolation strategy, and environmental test plan rather than relying only on component-level performance.

Where can I download the OPA227UA datasheet PDF?
The OPA227UA datasheet is available from the Texas Instruments OPA227 product page and the official OPAx227 documentation link. The manufacturer describes the OPAx227 family as a series of high-precision, low-noise operational amplifiers combining wide bandwidth with precision DC performance. For OPA227UA, use the ordering information and package drawings in the manufacturer documentation to confirm the 8-SOIC variant and verify lead-free packaging and shipment details.
What are the key specifications of OPA227UA that engineers should know?
The OPA227UA is a single-circuit, unity-gain-stable operational amplifier with an 8 MHz gain-bandwidth product and a 2.3 V/us slew rate. It is specified for -40°C to +85°C operation and is supplied in an 8-SOIC package. According to the Texas Instruments OPA227 product documentation, the OPAx227 family combines low noise, wide bandwidth, and high precision for instrumentation and demanding AC and DC signal-processing applications.
What can replace OPA227UA in an existing circuit?
The closest documented replacement families are the pin-compatible OP27 and OP37 devices, although each substitute must be checked for offset, noise, bandwidth, compensation, supply, and common-mode differences. Texas Instruments identifies the OPAx227 series as pin-for-pin compatible with industry-standard OP27 and OP37 devices. A cross-manufacturer substitute should not be selected from a generic cross-reference list alone; verify its complete electrical ratings against the circuit requirements.
Is OPA227UA suitable for precision signal conditioning?
Yes, OPA227UA is designed for precision and low-noise signal conditioning. Its combination of an 8 MHz gain-bandwidth product, low-noise operation, and low-offset-voltage positioning makes it appropriate for sensors, instrumentation, current measurement, and active analog filters. The actual accuracy also depends on resistor ratios, reference quality, supply regulation, input bias current, and PCB leakage, so the complete signal-chain budget should be calculated before production release.
Where can I buy OPA227UA online?
Use the Request a Quote form on this page to request OPA227UA availability, current commercial terms, and a quotation for the required quantity. The Request a Quote workflow is the appropriate route for confirming supply, lead time, minimum order quantity, and exact UA package handling without relying on a potentially stale automated listing. Engineers should also confirm the manufacturer ordering code and country-specific compliance requirements before releasing a purchase order.
What is the current price of OPA227UA?
Use the Request a Quote form on this page for the current OPA227UA quotation because commercial terms can change with quantity, inventory, package configuration, and delivery location. The form provides a consistent way to request unit pricing and lead time for the exact OPA227UA ordering code. For production planning, include the required quantity, date code policy, and packaging preference so the quotation reflects the intended manufacturing schedule.
What is the lead time and stock status for OPA227UA?
Current stock and lead time should be confirmed through the Request a Quote form on this page. Texas Instruments lists OPA227UA as an active orderable product, but active status alone does not guarantee immediate availability for every quantity. Include forecast volumes, scheduled delivery dates, and acceptable alternate shipment quantities in the request so procurement can confirm the most practical supply plan.
OPA227UA versus OP27UA: which is better for a precision amplifier?
OPA227UA is generally the better choice when low noise and improved precision relative to the legacy OP27 family are important, while the 8 MHz bandwidth and 2.3 V/us slew rate support broader signal bandwidth. Texas Instruments identifies the OPAx227 series as pin-for-pin compatible with industry-standard OP27 devices, but input offset, voltage noise, current noise, supply range, and bias current should still be compared for the exact operating conditions. Confirm stability and compensation before replacing an existing OP27 design.
OPA227UA versus OP37UA: which one should I select?
OPA227UA should be selected when the priority is the OPA227 family's low-noise, high-precision characteristics with an 8 MHz gain-bandwidth product. OP37 may be relevant for designs that require the behavior and compensation of the established OP37 family rather than an OPA227 upgrade. Although the OPAx227 devices are documented as pin-for-pin compatible with OP27 and OP37 devices, closed-loop gain, supply voltage, noise, and offset requirements must be checked before substitution.
When should I choose OPA227UA over OP27UA?
Choose OPA227UA when a new precision analog design benefits from the OPA227 family's combination of low noise, high precision, unity-gain stability, and an 8 MHz bandwidth. Retain OP27UA only when system qualification, historical behavior, or an existing approved BOM makes the legacy device preferable. Because the devices are pin-compatible, the decision should be based on measured noise, offset drift, bias current, supply range, and circuit stability rather than package convenience alone.
Is OPA227UA the same as OPA227UA/2K5?
OPA227UA and OPA227UA/2K5 identify the same Texas Instruments amplifier family and ordering configuration, with the suffix describing the manufacturer orderable part or reel packaging rather than a different electrical amplifier. For assembly planning, confirm the package drawing, tape orientation, pin-one location, and quantity per reel against the current manufacturer ordering information. Electrical design work should use the OPAx227 family documentation and the exact orderable code selected for production.
Can OPA227UA operate as a unity-gain voltage buffer?
Yes, OPA227UA is unity-gain stable and can be used as a voltage follower in a feedback configuration where its output follows the non-inverting input. Its 8 MHz gain-bandwidth product and 2.3 V/us slew rate define the practical speed and large-signal response. Confirm output-current capability, output-voltage swing, capacitive-load behavior, and the required settling accuracy at the signal frequency before using it as a general-purpose buffer.
Where is the OPA227UA pinout located?
Use the pin-configuration and package-drawing sections of the Texas Instruments OPAx227 datasheet to locate every OPA227UA pin. For an 8-SOIC implementation, verify the orientation mark, pin-one location, power pins, output connection, and input pins before routing the PCB. The visible product page also links to the official family documentation, which is the controlling source for pin numbering and package dimensions.
What is the best Analog Devices equivalent for OPA227UA?
The best Analog Devices equivalent must be selected from an 8-pin SOIC precision amplifier whose supply range, input common-mode range, offset, noise, bandwidth, and stability characteristics satisfy the target circuit. A cross-reference list can identify candidates, but it cannot by itself establish drop-in suitability. Compare the selected device against the complete OPA227UA operating envelope and verify the footprint and pin functions before treating it as a production replacement.
How should OPA227UA be laid out for low-noise performance?
Place the input, feedback, and compensation components close to the OPA227UA pins, and connect the bypass capacitor directly to the supply and ground pins. Keep the sensitive input node away from power inductors, switching nodes, and high-current return paths, while minimizing parasitic capacitance on the inverting input. Use a stable ground reference and verify the final layout for unintended oscillation, ground bounce, and capacitive loading before production testing.

Mühendislik referans verileri: OPA227UA — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose OPA227UA for new precision signal-conditioning designs that need low noise, low-offset-voltage performance, unity-gain stability, and an 8 MHz gain-bandwidth product in an 8-SOIC package. It is well suited to low-level sensors, precision current measurement, instrumentation, audio preamplification, and active filters. OP27UA may be appropriate when an existing approved design or legacy supply chain makes that family preferable. OP37UA is relevant for circuits specifically designed around OP37 behavior, but compensation and bandwidth must be revalidated. AD797ARZ is a cross-brand candidate for Analog Devices designs, subject to confirmation of footprint, supply range, common-mode limits, offset, noise, drift, and stability. No alternative should be approved solely because it appears in a cross-reference result; the complete error and stability budgets must be checked against the original circuit.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün OP27UA OP37UA AD797ARZ
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit

Ana Farklılayıcılar

  • Combines low-noise operation with 8 MHz bandwidth (karşılaştırma:AD797ARZ)
  • Unity-gain-stable single-amplifier implementation (karşılaştırma:OP27UA)
  • Documented pin-compatible upgrade path from OP27 and OP37 families (karşılaştırma:OP37UA)

Tasarım Notları

Place the OPA227UA feedback resistors, input components, and optional compensation capacitor directly beside the associated pins. Keep the non-inverting input path short and avoid routing it beneath digital clocks, switching-node copper, or inductor connections. For sensitive measurements, use a continuous ground reference and consider guarding the input node against surface leakage. Check the assembled board for contamination and connector leakage when working with very small signals.

Use the manufacturer's recommended power-supply arrangement and place the bypass capacitor immediately across the supply and ground pins. The bypass path should be short because supply impedance contributes directly to noise and can affect stability. Decouple sensitive analog sections locally rather than relying on a distant bulk capacitor. Confirm that the selected rails remain inside the device's documented operating limits under startup, load transients, temperature variation, and the worst-case power-supply tolerance.

Do not assume that unity-gain stability guarantees stability with every practical load. Capacitive loading, excessive output current, incorrect feedback topology, and source or sink impedance outside the recommended range can alter closed-loop behavior. Use stable precision resistors, keep feedback-loop area small, and simulate the final source impedance and load capacitance. Validate noise and settling with the complete analog chain rather than evaluating the amplifier alone.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS compliance is identified for OPA227UA. The available technical information does not establish REACH, halogen-free, conflict-minerals, or automotive qualification status.

İlgili Aramalar

opa227ua datasheet OPA227UA pinout OPA227UA datasheet pdf OPA227UA specifications OPA227UA equivalent OPA227UA replacement OPA227UA cross reference OPA227UA vs OP27UA OPA227UA vs OP37UA OPA227UA 8-SOIC footprint OPA227UA precision signal conditioning OPA227UA price OPA227UA stock Texas Instruments OPA227UA OPA227UA application circuit

İlgili Bileşenler ve Terimler

Texas Instruments OPA227 OPA227UA OP27UA OP37UA AD797ARZ operational amplifier voltage-feedback amplifier precision amplifier low-noise amplifier unity-gain stable gain-bandwidth product slew rate input offset voltage common-mode voltage 8-SOIC SOIC family surface-mount package signal conditioning sensor interface audio preamplification current measurement active filter RoHS REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle